system/{cryptsetup,json-c}: move from { 'system/' --> 'legacy/' } per policy.

3 files changed, 0 insertions, 511 deletions

diff --git a/system/cryptsetup/APKBUILD b/system/cryptsetup/APKBUILD
deleted file mode 100644
index 1786fbb0d..000000000
--- a/system/cryptsetup/APKBUILD
+++ /dev/null
@@ -1,61 +0,0 @@
-# Contributor: Sören Tempel <soeren+alpine@soeren-tempel.net>
-# Maintainer: 
-pkgname=cryptsetup
-pkgver=2.3.4
-pkgrel=1
-pkgdesc="Utility for setting up encrypted filesystems"
-url="https://gitlab.com/cryptsetup/cryptsetup"
-arch="all"
-license="GPL-2.0+"
-depends=""
-makedepends_build=""
-makedepends_host="lvm2-dev openssl-dev popt-dev util-linux-dev json-c-dev
-		 argon2-dev"
-makedepends="$makedepends_build $makedepends_host"
-checkdepends="bash debianutils-which lvm2 sharutils"
-subpackages="$pkgname-dev $pkgname-doc $pkgname-lang $pkgname-libs $pkgname-openrc"
-source="https://www.kernel.org/pub/linux/utils/$pkgname/v${pkgver%.*}/$pkgname-$pkgver.tar.gz
-	dmcrypt.confd
-	dmcrypt.initd
-	"
-
-build() {
-	./configure \
-		--build="$CBUILD" \
-		--host="$CHOST" \
-		--prefix=/usr \
-		--libdir=/lib \
-		--sbindir=/sbin \
-		--disable-static \
-		--enable-libargon2 \
-		--with-crypto_backend=openssl
-	make
-}
-
-check() {
-	make check
-}
-
-package() {
-	make DESTDIR=$pkgdir install
-
-	mkdir -p "$pkgdir"/usr/lib
-	mv "$pkgdir"/lib/pkgconfig "$pkgdir"/usr/lib/
-
-	install -Dm644 "$srcdir"/dmcrypt.confd "$pkgdir"/etc/conf.d/dmcrypt
-	install -Dm755 "$srcdir"/dmcrypt.initd "$pkgdir"/etc/init.d/dmcrypt
-
-	mkdir -p "$pkgdir"/usr/share/doc/$pkgname/
-	install -m644 README TODO FAQ NEWS docs/v${pkgver}-ReleaseNotes \
-		"$pkgdir"/usr/share/doc/$pkgname/
-}
-
-libs() {
-	pkgdesc="Cryptsetup shared library"
-	mkdir -p "$subpkgdir"
-	mv "$pkgdir"/lib "$subpkgdir"/
-}
-
-sha512sums="a0a4981ca7294d6f0568bc9465e78ee1781ad73fe77e8daa0bbe67693534f02d3510e6fba9f76749b90ce7533bc9ac96dd27b73d733f8051e9560a3b4196ca3c  cryptsetup-2.3.4.tar.gz
-74422d5e1614b43af894ea01da1ea80d805ec7f77981cbb80a6b1a4becad737a8825d7269812499095a7f50d39fa7da5bf4e4edae63529b1fe87b9176943a733  dmcrypt.confd
-81dad61cdecf1dc529b26eb3cdc15979a582c876b01268f88e7a71c8fae6911137c03bfa63fee64e064e5fb31f673610be27ecab9fc432229f13e7040698bd5c  dmcrypt.initd"
diff --git a/system/cryptsetup/dmcrypt.confd b/system/cryptsetup/dmcrypt.confd
deleted file mode 100644
index 642ff0870..000000000
--- a/system/cryptsetup/dmcrypt.confd
+++ /dev/null
@@ -1,111 +0,0 @@
-# /etc/conf.d/dmcrypt
-
-# For people who run dmcrypt on top of some other layer (like raid),
-# use rc_need to specify that requirement.  See the runscript(8) man
-# page for more information.
-
-#--------------------
-# Instructions
-#--------------------
-
-# Note regarding the syntax of this file.  This file is *almost* bash,
-# but each line is evaluated separately.  Separate swaps/targets can be
-# specified.  The init-script which reads this file assumes that a
-# swap= or target= line starts a new section, similar to lilo or grub
-# configuration.
-
-# Note when using gpg keys and /usr on a separate partition, you will
-# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly
-# and ensure that gpg has been compiled statically.
-# See http://bugs.gentoo.org/90482 for more information.
-
-# Note that the init-script which reads this file detects whether your
-# partition is LUKS or not. No mkfs is run unless you specify a makefs
-# option.
-
-# Global options:
-#----------------
-
-# How long to wait for each timeout (in seconds).
-dmcrypt_key_timeout=1
-
-# Max number of checks to perform (see dmcrypt_key_timeout).
-#dmcrypt_max_timeout=300
-
-# Number of password retries.
-dmcrypt_retries=5
-
-# Arguments:
-#-----------
-# target=<name>                      == Mapping name for partition.
-# swap=<name>                        == Mapping name for swap partition.
-# source='<dev>'                     == Real device for partition.
-#                                    Note: You can (and should) specify a tag like UUID
-#                                    for blkid (see -t option).  This is safer than using
-#                                    the full path to the device.
-# key='</path/to/keyfile>[:<mode>]'  == Fullpath from / or from inside removable media.
-# remdev='<dev>'                     == Device that will be assigned to removable media.
-# gpg_options='<opts>'               == Default are --quiet --decrypt
-# options='<opts>'                   == cryptsetup, for LUKS you can only use --readonly
-# loop_file='<file>'                 == Loopback file.
-#                                    Note: If you omit $source, then a free loopback will
-#                                    be looked up automatically.
-# pre_mount='cmds'                   == commands to execute before mounting partition.
-# post_mount='cmds'                  == commands to execute after mounting partition.
-#-----------
-# Supported Modes
-# gpg					== decrypt and pipe key into cryptsetup.
-#						Note: new-line character must not be part of key.
-#						Command to erase \n char: 'cat key | tr -d '\n' > cleanKey'
-
-#--------------------
-# dm-crypt examples
-#--------------------
-
-## swap
-# Swap partitions. These should come first so that no keys make their
-# way into unencrypted swap.
-# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom
-# If no makefs is given then mkswap will be assumed
-#swap=crypt-swap
-#source='/dev/hda2'
-
-## /home with passphrase
-#target=crypt-home
-#source='/dev/hda5'
-
-## /home with regular keyfile
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey'
-
-## /home with gpg protected key
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey:gpg'
-
-## /home with regular keyfile on removable media(such as usb-stick)
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey'
-#remdev='/dev/sda1'
-
-## /home with gpg protected key on removable media(such as usb-stick)
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey:gpg'
-#remdev='/dev/sda1'
-
-## /tmp with regular keyfile
-#target=crypt-tmp
-#source='/dev/hda6'
-#key='/full/path/to/tmpkey'
-#pre_mount='/sbin/mkreiserfs -f -f ${dev}'
-#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}'
-
-## Loopback file example
-#target='crypt-loop-home'
-#source='/dev/loop0'
-#loop_file='/mnt/crypt/home'
-
-# The file must be terminated by a newline.  Or leave this comment last.
diff --git a/system/cryptsetup/dmcrypt.initd b/system/cryptsetup/dmcrypt.initd
deleted file mode 100644
index 340b579b7..000000000
--- a/system/cryptsetup/dmcrypt.initd
+++ /dev/null
@@ -1,339 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	before checkfs fsck
-
-	if grep -qs ^swap= "${conf_file}" ; then
-		before swap
-	fi
-}
-
-# We support multiple dmcrypt instances based on $SVCNAME
-conf_file="/etc/conf.d/${SVCNAME}"
-
-# Get splash helpers if available.
-if [ -e /sbin/splash-functions.sh ] ; then
-	. /sbin/splash-functions.sh
-fi
-
-# Setup mappings for an individual target/swap
-# Note: This relies on variables localized in the main body below.
-dm_crypt_execute() {
-	local dev ret mode foo
-
-	if [ -z "${target}" -a -z "${swap}" ] ; then
-		return
-	fi
-
-	# Set up default values.
-	: ${dmcrypt_key_timeout:=1}
-	: ${dmcrypt_max_timeout:=300}
-	: ${dmcrypt_retries:=5}
-
-	# Handle automatic look up of the source path.
-	if [ -z "${source}" -a -n "${loop_file}" ] ; then
-		source=$(losetup --show -f "${loop_file}")
-	fi
-	case ${source} in
-	*=*)
-		source="$(findfs ${source})"
-		;;
-	esac
-	if [ -z "${source}" ] || [ ! -e "${source}" ] ; then
-		ewarn "source \"${source}\" for ${target} missing, skipping..."
-		return
-	fi
-
-	if [ -n "${target}" ] ; then
-		# let user set options, otherwise leave empty
-		: ${options:=' '}
-	elif [ -n "${swap}" ] ; then
-		if cryptsetup isLuks ${source} 2>/dev/null ; then
-			ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup."
-			return
-		fi
-		target=${swap}
-		# swap contents do not need to be preserved between boots, luks not required.
-		# suspend2 users should have initramfs's init handling their swap partition either way.
-		: ${options:='-c aes -h sha1 -d /dev/urandom'}
-		: ${pre_mount:='mkswap ${dev}'}
-	fi
-
-	if [ -n "${loop_file}" ] ; then
-		dev="/dev/mapper/${target}"
-		ebegin "  Setting up loop device ${source}"
-		losetup ${source} ${loop_file}
-	fi
-
-	# cryptsetup:
-	# open   <device> <name>      # <device> is $source
-	# create <name>   <device>    # <name>   is $target
-	local arg1="create" arg2="${target}" arg3="${source}"
-	if cryptsetup isLuks ${source} 2>/dev/null ; then
-		arg1="open"
-		arg2="${source}"
-		arg3="${target}"
-	fi
-
-	# Older versions reported:
-	#	${target} is active:
-	# Newer versions report:
-	#	${target} is active[ and is in use.]
-	if cryptsetup status ${target} | egrep -q ' is active' ; then
-		einfo "dm-crypt mapping ${target} is already configured"
-		return
-	fi
-	splash svc_input_begin ${SVCNAME} >/dev/null 2>&1
-
-	# Handle keys
-	if [ -n "${key}" ] ; then
-		read_abort() {
-			# some colors
-			local ans savetty resettty
-			[ -z "${NORMAL}" ] && eval $(eval_ecolors)
-			einfon "  $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) "
-			shift
-			# This is ugly as s**t.  But POSIX doesn't provide `read -t`, so
-			# we end up having to implement our own crap with stty/etc...
-			savetty=$(stty -g)
-			resettty='stty ${savetty}; trap - EXIT HUP INT TERM'
-			trap 'eval "${resettty}"' EXIT HUP INT TERM
-			stty -icanon
-			stty min 0 time "$(( $2 * 10 ))"
-			ans=$(dd count=1 bs=1 2>/dev/null) || ans=''
-			eval "${resettty}"
-			if [ -z "${ans}" ] ; then
-				printf '\r'
-			else
-				echo
-			fi
-			case ${ans} in
-				[yY]) return 0;;
-				*) return 1;;
-			esac
-		}
-
-		# Notes: sed not used to avoid case where /usr partition is encrypted.
-		mode=${key##*:} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg
-		key=${key%:*}
-		case "${mode}" in
-		gpg|reg)
-			# handle key on removable device
-			if [ -n "${remdev}" ] ; then
-				# temp directory to mount removable device
-				local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$"
-				if [ ! -d "${mntrem}" ] ; then
-					if ! mkdir -p "${mntrem}" ; then
-						ewarn "${source} will not be decrypted ..."
-						einfo "Reason: Unable to create temporary mount point '${mntrem}'"
-						return
-					fi
-				fi
-				i=0
-				einfo "Please insert removable device for ${target}"
-				while [ ${i} -lt ${dmcrypt_max_timeout} ] ; do
-					foo=""
-					if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then
-						# keyfile exists?
-						if [ ! -e "${mntrem}${key}" ] ; then
-							umount -n "${mntrem}"
-							rmdir "${mntrem}"
-							einfo "Cannot find ${key} on removable media."
-							read_abort "Abort" ${dmcrypt_key_timeout} && return
-						else
-							key="${mntrem}${key}"
-							break
-						fi
-					else
-						[ -e "${remdev}" ] \
-							&& foo="mount failed" \
-							|| foo="mount source not found"
-					fi
-					: $((i += 1))
-					read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return
-				done
-			else    # keyfile ! on removable device
-				if [ ! -e "${key}" ] ; then
-					ewarn "${source} will not be decrypted ..."
-					einfo "Reason: keyfile ${key} does not exist."
-					return
-				fi
-			fi
-			;;
-		*)
-			ewarn "${source} will not be decrypted ..."
-			einfo "Reason: mode ${mode} is invalid."
-			return
-			;;
-		esac
-	else
-		mode=none
-	fi
-	ebegin "  ${target} using: ${options} ${arg1} ${arg2} ${arg3}"
-	if [ "${mode}" = "gpg" ] ; then
-		: ${gpg_options:='-q -d'}
-		# gpg available ?
-		if command -v gpg >/dev/null ; then
-			i=0
-			while [ ${i} -lt ${dmcrypt_retries} ] ; do
-				# paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected.
-				# save stdin stdout stderr "values"
-				timeout ${dmcrypt_max_timeout} gpg ${gpg_options} ${key} 2>/dev/null | \
-					cryptsetup --key-file - ${options} ${arg1} ${arg2} ${arg3}
-				ret=$?
-				# The timeout command exits 124 when it times out.
-				[ ${ret} -eq 0 -o ${ret} -eq 124 ] && break
-				: $(( i += 1 ))
-			done
-			eend ${ret} "failure running cryptsetup"
-		else
-			ewarn "${source} will not be decrypted ..."
-			einfo "Reason: cannot find gpg application."
-			einfo "You have to install app-crypt/gnupg first."
-			einfo "If you have /usr on its own partition, try copying gpg to /bin ."
-		fi
-	else
-		if [ "${mode}" = "reg" ] ; then
-			cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3}
-			ret=$?
-			eend ${ret} "failure running cryptsetup"
-		else
-			cryptsetup ${options} ${arg1} ${arg2} ${arg3}
-			ret=$?
-			eend ${ret} "failure running cryptsetup"
-		fi
-	fi
-	if [ -d "${mntrem}" ] ; then
-		umount -n ${mntrem} 2>/dev/null >/dev/null
-		rmdir ${mntrem} 2>/dev/null >/dev/null
-	fi
-	splash svc_input_end ${SVCNAME} >/dev/null 2>&1
-
-	if [ ${ret} -ne 0 ] ; then
-		cryptfs_status=1
-	else
-		if [ -n "${pre_mount}" ] ; then
-			dev="/dev/mapper/${target}"
-			eval ebegin \""    pre_mount: ${pre_mount}"\"
-			eval "${pre_mount}" > /dev/null
-			ewend $? || cryptfs_status=1
-		fi
-	fi
-}
-
-# Lookup optional bootparams
-get_bootparam_val() {
-	# We're given something like:
-	#    foo=bar=cow
-	# Return the "bar=cow" part.
-	case $1 in
-	*=*)
-		echo "${1#*=}"
-		;;
-	esac
-}
-
-start() {
-	local header=true cryptfs_status=0
-	local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev
-
-	local x
-	for x in $(cat /proc/cmdline) ; do
-		case "${x}" in
-		key_timeout=*)
-			dmcrypt_key_timeout=$(get_bootparam_val "${x}")
-			;;
-		esac
-	done
-
-	while read targetline <&3 ; do
-		case ${targetline} in
-		# skip comments and blank lines
-		""|"#"*) continue ;;
-		# skip service-specific openrc configs #377927
-		rc_*) continue ;;
-		esac
-
-		${header} && ebegin "Setting up dm-crypt mappings"
-		header=false
-
-		# check for the start of a new target/swap
-		case ${targetline} in
-		target=*|swap=*)
-			# If we have a target queued up, then execute it
-			dm_crypt_execute
-
-			# Prepare for the next target/swap by resetting variables
-			unset gpg_options key loop_file target options pre_mount post_mount source swap remdev
-			;;
-
-		gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*)
-			if [ -z "${target}${swap}" ] ; then
-				ewarn "Ignoring setting outside target/swap section: ${targetline}"
-				continue
-			fi
-			;;
-
-		dmcrypt_*=*)
-			# ignore global options
-			continue
-			;;
-
-		*)
-			ewarn "Skipping invalid line in ${conf_file}: ${targetline}"
-			;;
-		esac
-
-		# Queue this setting for the next call to dm_crypt_execute
-		eval "${targetline}"
-	done 3< ${conf_file}
-
-	# If we have a target queued up, then execute it
-	dm_crypt_execute
-
-	ewend ${cryptfs_status} "Failed to setup dm-crypt devices"
-}
-
-stop() {
-	local line header
-
-	# Break down all mappings
-	header=true
-	egrep "^(target|swap)=" ${conf_file} | \
-	while read line ; do
-		${header} && einfo "Removing dm-crypt mappings"
-		header=false
-
-		target= swap=
-		eval ${line}
-
-		[ -n "${swap}" ] && target=${swap}
-		if [ -z "${target}" ] ; then
-			ewarn "invalid line in ${conf_file}: ${line}"
-			continue
-		fi
-
-		ebegin "  ${target}"
-		cryptsetup remove ${target}
-		eend $?
-	done
-
-	# Break down loop devices
-	header=true
-	grep '^source=./dev/loop' ${conf_file} | \
-	while read line ; do
-		${header} && einfo "Detaching dm-crypt loop devices"
-		header=false
-
-		source=
-		eval ${line}
-
-		ebegin "  ${source}"
-		losetup -d "${source}"
-		eend $?
-	done
-
-	return 0
-}