From fd2bb2f751c13b3c0c002b8e012810902b9da364 Mon Sep 17 00:00:00 2001 From: "A. Wilcox" Date: Fri, 8 Jun 2018 02:02:24 -0500 Subject: harmony -> system --- system/wpa_supplicant/APKBUILD | 104 ++++ system/wpa_supplicant/config | 550 +++++++++++++++++++++ system/wpa_supplicant/eloop.patch | 16 + system/wpa_supplicant/libressl.patch | 49 ++ ...-Avoid-key-reinstallation-in-FT-handshake.patch | 174 +++++++ ...nstallation-of-an-already-in-use-group-ke.patch | 250 ++++++++++ ...ection-of-GTK-IGTK-reinstallation-of-WNM-.patch | 184 +++++++ ...04-Prevent-installation-of-an-all-zero-TK.patch | 79 +++ ...Fix-PTK-rekeying-to-generate-a-new-ANonce.patch | 64 +++ ...6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch | 132 +++++ ...WNM-Sleep-Mode-Response-without-pending-r.patch | 43 ++ ...llow-multiple-Reassociation-Response-fram.patch | 82 +++ system/wpa_supplicant/wpa_cli.sh | 33 ++ system/wpa_supplicant/wpa_supplicant.confd | 6 + system/wpa_supplicant/wpa_supplicant.initd | 53 ++ 15 files changed, 1819 insertions(+) create mode 100644 system/wpa_supplicant/APKBUILD create mode 100644 system/wpa_supplicant/config create mode 100644 system/wpa_supplicant/eloop.patch create mode 100644 system/wpa_supplicant/libressl.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch create mode 100644 system/wpa_supplicant/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch create mode 100644 system/wpa_supplicant/wpa_cli.sh create mode 100644 system/wpa_supplicant/wpa_supplicant.confd create mode 100644 system/wpa_supplicant/wpa_supplicant.initd (limited to 'system/wpa_supplicant') diff --git a/system/wpa_supplicant/APKBUILD b/system/wpa_supplicant/APKBUILD new file mode 100644 index 000000000..7aebbef1f --- /dev/null +++ b/system/wpa_supplicant/APKBUILD @@ -0,0 +1,104 @@ +# Contributor: Sören Tempel +# Maintainer: Natanael Copa +pkgname=wpa_supplicant +pkgver=2.6 +pkgrel=7 +pkgdesc="A utility providing key negotiation for WPA wireless networks" +url="https://w1.fi/wpa_supplicant/" +arch="all" +license="BSD" +subpackages="$pkgname-doc $pkgname-openrc" +depends="dbus" +makedepends="linux-headers openssl-dev dbus-dev libnl3-dev pcsc-lite-dev" +source="http://w1.fi/releases/$pkgname-$pkgver.tar.gz + rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch + rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch + rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch + rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch + rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch + rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch + rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch + rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch + + wpa_supplicant.initd + wpa_supplicant.confd + eloop.patch + + config + wpa_cli.sh" + +# secfixes: +# 2.6-r7: +# - CVE-2017-13077 +# - CVE-2017-13078 +# - CVE-2017-13079 +# - CVE-2017-13080 +# - CVE-2017-13081 +# - CVE-2017-13082 +# - CVE-2017-13086 +# - CVE-2017-13087 +# - CVE-2017-13088 + +builddir="$srcdir"/$pkgname-$pkgver +prepare() { + cd "$builddir" + default_prepare + + # Copy our configuration file to the build directory + cp "$srcdir"/config "$builddir"/wpa_supplicant/.config +} + +build() { + cd "$builddir"/wpa_supplicant + make LIBDIR=/lib BINDIR=/sbin +} + +check() { + cd "$builddir"/wpa_supplicant + make eapol_test +} + +package() { + cd "$builddir"/wpa_supplicant + make DESTDIR="$pkgdir" LIBDIR=/lib BINDIR=/sbin install + install -Dm644 wpa_supplicant.conf \ + "$pkgdir"/usr/share/doc/wpa_supplicant/examples/wpa_supplicant.conf + install -Dm755 "$srcdir"/wpa_cli.sh \ + "$pkgdir"/etc/wpa_supplicant/wpa_cli.sh + + local man= + for man in doc/docbook/*.?; do + install -Dm644 "$man" \ + "$pkgdir"/usr/share/man/man${man##*.}/${man##*/} + done + install -Dm755 eapol_test "$pkgdir"/sbin/eapol_test + + # dbus + cd dbus + install -d "$pkgdir"/etc/dbus-1/system.d + install -m644 dbus-wpa_supplicant.conf \ + "$pkgdir"/etc/dbus-1/system.d/wpa_supplicant.conf + install -d "$pkgdir"/usr/share/dbus-1/system-services + install fi.epitest.hostap.WPASupplicant.service \ + "$pkgdir"/usr/share/dbus-1/system-services + install -d "$pkgdir"/var/run/wpa_supplicant + install -Dm755 "$srcdir"/wpa_supplicant.initd \ + "$pkgdir"/etc/init.d/wpa_supplicant + install -Dm644 "$srcdir"/wpa_supplicant.confd \ + "$pkgdir"/etc/conf.d/wpa_supplicant +} + +sha512sums="46442cddb6ca043b8b08d143908f149954c238e0f3a57a0df73ca4fab9c1acd91b078f3f26375a1d99cd1d65625986328018c735d8705882c8f91e389cad28a6 wpa_supplicant-2.6.tar.gz +f855fa792425f175ccc800eb49df42067b1c1f4b52ba2d24160af4dfbb74dcf8e81661b7e6c8d92fa408938b8a559fc74557d1677913e4a751bfd43706c14bb6 rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch +b4e413aa815572ea0002d33d24b69cd499aebb5efebed8fcaade8b29324bb5853a5db64e8b1dfdf24478e02c66196238b81a6ec777a7a28610435dce4d2c344e rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch +a6382d8e84b4829be33c46bf2f4c6f3232c9d924a4547a21dfe023bf5be8ee1c635920295f52be285359efaae95bcc1f12b512659cfd1653b871dd0bea7e5ace rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch +51ed806f0d5b3f588e26d4db4dcfc6be2cfb12002e26893a6cedd62c7cad0d0de75aed4a666223c4877fc1854b08dce6ddf6f6c4cfd752a5d8d58ad4a968b553 rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch +8707a123cd78149dfee9f5bd791761ee1eca605ef96580167044c2339c896920cf0e030b184a5afa9e310f5755afb30bef8ebd4522fc52753f3fbd6acead2cdf rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch +37d050b2e4a3598484912667d8b2705fbe84c5c562267f900d42b0c7b606fb1fed09ddca8b80e2131768baa8f3690aab6ba7a232dee6ff1e66150fdb8816c927 rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch +111e655cfbb3a86e3792040e0ea375490d31c42c9d43cbe911290d54df5f4db437e4c8ad0e937c51729dcefeb0db0989b8ab55b9523398683abd08ebfec18076 rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch +fc84edd8b30305cc42053c872554098f3f077292ec980ed6a442f37884087ff2f055738fd55977ed792bef1887dcc8c4626586465d78dd0258edb83dcd50a65a rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch +11eed22f6e793f40c788d586c715deecae03c421d11761b7b4a376660bce812c54cc6f353c7d4d5da9c455aeffd778baefb9e76d380027a729574a756e54ddcc wpa_supplicant.initd +29103161ec2b9631fca9e8d9a97fafd60ffac3fe78cf613b834395ddcaf8be1e253c22e060d7d9f9b974b2d7ce794caa932a2125e29f6494b75bce475f7b30e1 wpa_supplicant.confd +2be055dd1f7da5a3d8e79c2f2c0220ddd31df309452da18f290144d2112d6dbde0fc633bb2ad02c386a39d7785323acaf5f70e5969995a1e8303a094eb5fe232 eloop.patch +6707991f9a071f2fcb09d164d31d12b1f52b91fbb5574b70b8d6f9727f72bbe42b03dd66d10fcc2126f5b7e49ac785657dec90e88b4bf54a9aa5638582f6e505 config +44d33cfe419cdb65cc14f2ac05aa9f8a1b9f2f432181e498071e41ef835662db1e4c5142adf4cfab2475e7b606696169936bd159d1d711f803322db93f242361 wpa_cli.sh" diff --git a/system/wpa_supplicant/config b/system/wpa_supplicant/config new file mode 100644 index 000000000..f35daa0d1 --- /dev/null +++ b/system/wpa_supplicant/config @@ -0,0 +1,550 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# QCA vendor extensions to nl80211 +#CONFIG_DRIVER_NL80211_QCA=y + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$ +#LIBS += -L$ + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +CONFIG_EAP_PSK=y + +# EAP-pwd (secure authentication using only a password) +#CONFIG_EAP_PWD=y + +# EAP-PAX +CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# EAP-EKE +#CONFIG_EAP_EKE=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +CONFIG_PCSC=y + +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) +# named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +CONFIG_WPA_CLI_EDIT=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operating system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +#CONFIG_ELOOP=eloop + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Should we use kqueue instead of select? Select is used by default. +#CONFIG_ELOOP_KQUEUE=y + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# Disable Linux packet socket workaround applicable for station interface +# in a bridge for EAPOL frames. This should be uncommented only if the kernel +# is known to not have the regression issue in packet socket behavior with +# bridge interfaces (commit 'bridge: respect RFC2863 operational state')'). +#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection), also known as PMF +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=openssl + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +#CONFIG_TLSV12=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Send debug messages to syslog instead of stdout +#CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, uncomment these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, uncomment these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +#CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +#CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Enable interface matching in wpa_supplicant +#CONFIG_MATCH_IFACE=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. +CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +#CONFIG_WIFI_DISPLAY=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# OS X builds. This is only for building eapol_test. +#CONFIG_OSX=y + +# Automatic Channel Selection +# This will allow wpa_supplicant to pick the channel automatically when channel +# is set to "0". +# +# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative +# to "channel=0". This would enable us to eventually add other ACS algorithms in +# similar way. +# +# Automatic selection is currently only done through initialization, later on +# we hope to do background checks to keep us moving to more ideal channels as +# time goes by. ACS is currently only supported through the nl80211 driver and +# your driver must have survey dump capability that is filled by the driver +# during scanning. +# +# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with +# a newly to create wpa_supplicant.conf variable acs_num_scans. +# +# Supported ACS drivers: +# * ath9k +# * ath5k +# * ath10k +# +# For more details refer to: +# http://wireless.kernel.org/en/users/Documentation/acs +#CONFIG_ACS=y + +# Support Multi Band Operation +#CONFIG_MBO=y diff --git a/system/wpa_supplicant/eloop.patch b/system/wpa_supplicant/eloop.patch new file mode 100644 index 000000000..bab2cee4e --- /dev/null +++ b/system/wpa_supplicant/eloop.patch @@ -0,0 +1,16 @@ +$OpenBSD: patch-src_utils_eloop_c,v 1.5 2015/09/29 11:57:54 dcoppa Exp $ + +don't try to access list members to free them unless already initialised + +--- a/src/utils/eloop.c.orig Sun Sep 27 21:02:05 2015 ++++ b/src/utils/eloop.c Mon Sep 28 09:35:05 2015 +@@ -1064,6 +1064,9 @@ void eloop_destroy(void) + struct eloop_timeout *timeout, *prev; + struct os_reltime now; + ++ if (eloop.timeout.prev == NULL) ++ return; ++ + os_get_reltime(&now); + dl_list_for_each_safe(timeout, prev, &eloop.timeout, + struct eloop_timeout, list) { diff --git a/system/wpa_supplicant/libressl.patch b/system/wpa_supplicant/libressl.patch new file mode 100644 index 000000000..56146eab5 --- /dev/null +++ b/system/wpa_supplicant/libressl.patch @@ -0,0 +1,49 @@ +--- a/src/crypto/crypto_openssl.c.orig ++++ b/src/crypto/crypto_openssl.c +@@ -611,7 +611,7 @@ + + void * dh5_init(struct wpabuf **priv, struct wpabuf **publ) + { +-#if OPENSSL_VERSION_NUMBER < 0x10100000L ++#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) + DH *dh; + struct wpabuf *pubkey = NULL, *privkey = NULL; + size_t publen, privlen; +@@ -712,7 +712,7 @@ + + void * dh5_init_fixed(const struct wpabuf *priv, const struct wpabuf *publ) + { +-#if OPENSSL_VERSION_NUMBER < 0x10100000L ++#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) + DH *dh; + + dh = DH_new(); +--- a/src/crypto/tls_openssl.c.orig ++++ b/src/crypto/tls_openssl.c +@@ -919,7 +919,7 @@ + } + #endif /* OPENSSL_FIPS */ + #endif /* CONFIG_FIPS */ +-#if OPENSSL_VERSION_NUMBER < 0x10100000L ++#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) + SSL_load_error_strings(); + SSL_library_init(); + #ifndef OPENSSL_NO_SHA256 +@@ -1043,7 +1043,7 @@ + + tls_openssl_ref_count--; + if (tls_openssl_ref_count == 0) { +-#if OPENSSL_VERSION_NUMBER < 0x10100000L ++#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) + #ifndef OPENSSL_NO_ENGINE + ENGINE_cleanup(); + #endif /* OPENSSL_NO_ENGINE */ +@@ -2334,7 +2334,7 @@ + return 0; + + #ifdef PKCS12_FUNCS +-#if OPENSSL_VERSION_NUMBER < 0x10002000L ++#if OPENSSL_VERSION_NUMBER < 0x10002000L || defined(LIBRESSL_VERSION_NUMBER) + /* + * Clear previously set extra chain certificates, if any, from PKCS#12 + * processing in tls_parse_pkcs12() to allow OpenSSL to build a new diff --git a/system/wpa_supplicant/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch b/system/wpa_supplicant/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch new file mode 100644 index 000000000..727684865 --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch @@ -0,0 +1,174 @@ +From cf4cab804c7afd5c45505528a8d16e46163243a2 Mon Sep 17 00:00:00 2001 +From: Mathy Vanhoef +Date: Fri, 14 Jul 2017 15:15:35 +0200 +Subject: [PATCH 1/8] hostapd: Avoid key reinstallation in FT handshake + +Do not reinstall TK to the driver during Reassociation Response frame +processing if the first attempt of setting the TK succeeded. This avoids +issues related to clearing the TX/RX PN that could result in reusing +same PN values for transmitted frames (e.g., due to CCM nonce reuse and +also hitting replay protection on the receiver) and accepting replayed +frames on RX side. + +This issue was introduced by the commit +0e84c25434e6a1f283c7b4e62e483729085b78d2 ('FT: Fix PTK configuration in +authenticator') which allowed wpa_ft_install_ptk() to be called multiple +times with the same PTK. While the second configuration attempt is +needed with some drivers, it must be done only if the first attempt +failed. + +Signed-off-by: Mathy Vanhoef +--- + src/ap/ieee802_11.c | 16 +++++++++++++--- + src/ap/wpa_auth.c | 11 +++++++++++ + src/ap/wpa_auth.h | 3 ++- + src/ap/wpa_auth_ft.c | 10 ++++++++++ + src/ap/wpa_auth_i.h | 1 + + 5 files changed, 37 insertions(+), 4 deletions(-) + +diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c +index 4e04169..333035f 100644 +--- a/src/ap/ieee802_11.c ++++ b/src/ap/ieee802_11.c +@@ -1841,6 +1841,7 @@ static int add_associated_sta(struct hostapd_data *hapd, + { + struct ieee80211_ht_capabilities ht_cap; + struct ieee80211_vht_capabilities vht_cap; ++ int set = 1; + + /* + * Remove the STA entry to ensure the STA PS state gets cleared and +@@ -1848,9 +1849,18 @@ static int add_associated_sta(struct hostapd_data *hapd, + * FT-over-the-DS, where a station re-associates back to the same AP but + * skips the authentication flow, or if working with a driver that + * does not support full AP client state. ++ * ++ * Skip this if the STA has already completed FT reassociation and the ++ * TK has been configured since the TX/RX PN must not be reset to 0 for ++ * the same key. + */ +- if (!sta->added_unassoc) ++ if (!sta->added_unassoc && ++ (!(sta->flags & WLAN_STA_AUTHORIZED) || ++ !wpa_auth_sta_ft_tk_already_set(sta->wpa_sm))) { + hostapd_drv_sta_remove(hapd, sta->addr); ++ wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED); ++ set = 0; ++ } + + #ifdef CONFIG_IEEE80211N + if (sta->flags & WLAN_STA_HT) +@@ -1873,11 +1883,11 @@ static int add_associated_sta(struct hostapd_data *hapd, + sta->flags & WLAN_STA_VHT ? &vht_cap : NULL, + sta->flags | WLAN_STA_ASSOC, sta->qosinfo, + sta->vht_opmode, sta->p2p_ie ? 1 : 0, +- sta->added_unassoc)) { ++ set)) { + hostapd_logger(hapd, sta->addr, + HOSTAPD_MODULE_IEEE80211, HOSTAPD_LEVEL_NOTICE, + "Could not %s STA to kernel driver", +- sta->added_unassoc ? "set" : "add"); ++ set ? "set" : "add"); + + if (sta->added_unassoc) { + hostapd_drv_sta_remove(hapd, sta->addr); +diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c +index 3587086..707971d 100644 +--- a/src/ap/wpa_auth.c ++++ b/src/ap/wpa_auth.c +@@ -1745,6 +1745,9 @@ int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event) + #else /* CONFIG_IEEE80211R */ + break; + #endif /* CONFIG_IEEE80211R */ ++ case WPA_DRV_STA_REMOVED: ++ sm->tk_already_set = FALSE; ++ return 0; + } + + #ifdef CONFIG_IEEE80211R +@@ -3250,6 +3253,14 @@ int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm) + } + + ++int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm) ++{ ++ if (!sm || !wpa_key_mgmt_ft(sm->wpa_key_mgmt)) ++ return 0; ++ return sm->tk_already_set; ++} ++ ++ + int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm, + struct rsn_pmksa_cache_entry *entry) + { +diff --git a/src/ap/wpa_auth.h b/src/ap/wpa_auth.h +index 0de8d97..97461b0 100644 +--- a/src/ap/wpa_auth.h ++++ b/src/ap/wpa_auth.h +@@ -267,7 +267,7 @@ void wpa_receive(struct wpa_authenticator *wpa_auth, + u8 *data, size_t data_len); + enum wpa_event { + WPA_AUTH, WPA_ASSOC, WPA_DISASSOC, WPA_DEAUTH, WPA_REAUTH, +- WPA_REAUTH_EAPOL, WPA_ASSOC_FT ++ WPA_REAUTH_EAPOL, WPA_ASSOC_FT, WPA_DRV_STA_REMOVED + }; + void wpa_remove_ptk(struct wpa_state_machine *sm); + int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event); +@@ -280,6 +280,7 @@ int wpa_auth_pairwise_set(struct wpa_state_machine *sm); + int wpa_auth_get_pairwise(struct wpa_state_machine *sm); + int wpa_auth_sta_key_mgmt(struct wpa_state_machine *sm); + int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm); ++int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm); + int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm, + struct rsn_pmksa_cache_entry *entry); + struct rsn_pmksa_cache_entry * +diff --git a/src/ap/wpa_auth_ft.c b/src/ap/wpa_auth_ft.c +index 42242a5..e63b99a 100644 +--- a/src/ap/wpa_auth_ft.c ++++ b/src/ap/wpa_auth_ft.c +@@ -780,6 +780,14 @@ void wpa_ft_install_ptk(struct wpa_state_machine *sm) + return; + } + ++ if (sm->tk_already_set) { ++ /* Must avoid TK reconfiguration to prevent clearing of TX/RX ++ * PN in the driver */ ++ wpa_printf(MSG_DEBUG, ++ "FT: Do not re-install same PTK to the driver"); ++ return; ++ } ++ + /* FIX: add STA entry to kernel/driver here? The set_key will fail + * most likely without this.. At the moment, STA entry is added only + * after association has been completed. This function will be called +@@ -792,6 +800,7 @@ void wpa_ft_install_ptk(struct wpa_state_machine *sm) + + /* FIX: MLME-SetProtection.Request(TA, Tx_Rx) */ + sm->pairwise_set = TRUE; ++ sm->tk_already_set = TRUE; + } + + +@@ -898,6 +907,7 @@ static int wpa_ft_process_auth_req(struct wpa_state_machine *sm, + + sm->pairwise = pairwise; + sm->PTK_valid = TRUE; ++ sm->tk_already_set = FALSE; + wpa_ft_install_ptk(sm); + + buflen = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) + +diff --git a/src/ap/wpa_auth_i.h b/src/ap/wpa_auth_i.h +index 72b7eb3..7fd8f05 100644 +--- a/src/ap/wpa_auth_i.h ++++ b/src/ap/wpa_auth_i.h +@@ -65,6 +65,7 @@ struct wpa_state_machine { + struct wpa_ptk PTK; + Boolean PTK_valid; + Boolean pairwise_set; ++ Boolean tk_already_set; + int keycount; + Boolean Pair; + struct wpa_key_replay_counter { +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch b/system/wpa_supplicant/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch new file mode 100644 index 000000000..1802d664a --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch @@ -0,0 +1,250 @@ +From 927f891007c402fefd1ff384645b3f07597c3ede Mon Sep 17 00:00:00 2001 +From: Mathy Vanhoef +Date: Wed, 12 Jul 2017 16:03:24 +0200 +Subject: [PATCH 2/8] Prevent reinstallation of an already in-use group key + +Track the current GTK and IGTK that is in use and when receiving a +(possibly retransmitted) Group Message 1 or WNM-Sleep Mode Response, do +not install the given key if it is already in use. This prevents an +attacker from trying to trick the client into resetting or lowering the +sequence counter associated to the group key. + +Signed-off-by: Mathy Vanhoef +--- + src/common/wpa_common.h | 11 +++++ + src/rsn_supp/wpa.c | 116 ++++++++++++++++++++++++++++++------------------ + src/rsn_supp/wpa_i.h | 4 ++ + 3 files changed, 87 insertions(+), 44 deletions(-) + +diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h +index af1d0f0..d200285 100644 +--- a/src/common/wpa_common.h ++++ b/src/common/wpa_common.h +@@ -217,6 +217,17 @@ struct wpa_ptk { + size_t tk_len; + }; + ++struct wpa_gtk { ++ u8 gtk[WPA_GTK_MAX_LEN]; ++ size_t gtk_len; ++}; ++ ++#ifdef CONFIG_IEEE80211W ++struct wpa_igtk { ++ u8 igtk[WPA_IGTK_MAX_LEN]; ++ size_t igtk_len; ++}; ++#endif /* CONFIG_IEEE80211W */ + + /* WPA IE version 1 + * 00-50-f2:1 (OUI:OUI type) +diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c +index 3c47879..95bd7be 100644 +--- a/src/rsn_supp/wpa.c ++++ b/src/rsn_supp/wpa.c +@@ -714,6 +714,15 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm, + const u8 *_gtk = gd->gtk; + u8 gtk_buf[32]; + ++ /* Detect possible key reinstallation */ ++ if (sm->gtk.gtk_len == (size_t) gd->gtk_len && ++ os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) { ++ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, ++ "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)", ++ gd->keyidx, gd->tx, gd->gtk_len); ++ return 0; ++ } ++ + wpa_hexdump_key(MSG_DEBUG, "WPA: Group Key", gd->gtk, gd->gtk_len); + wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, + "WPA: Installing GTK to the driver (keyidx=%d tx=%d len=%d)", +@@ -748,6 +757,9 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm, + } + os_memset(gtk_buf, 0, sizeof(gtk_buf)); + ++ sm->gtk.gtk_len = gd->gtk_len; ++ os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); ++ + return 0; + } + +@@ -854,6 +866,48 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, + } + + ++#ifdef CONFIG_IEEE80211W ++static int wpa_supplicant_install_igtk(struct wpa_sm *sm, ++ const struct wpa_igtk_kde *igtk) ++{ ++ size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher); ++ u16 keyidx = WPA_GET_LE16(igtk->keyid); ++ ++ /* Detect possible key reinstallation */ ++ if (sm->igtk.igtk_len == len && ++ os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) { ++ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, ++ "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)", ++ keyidx); ++ return 0; ++ } ++ ++ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, ++ "WPA: IGTK keyid %d pn %02x%02x%02x%02x%02x%02x", ++ keyidx, MAC2STR(igtk->pn)); ++ wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK", igtk->igtk, len); ++ if (keyidx > 4095) { ++ wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, ++ "WPA: Invalid IGTK KeyID %d", keyidx); ++ return -1; ++ } ++ if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), ++ broadcast_ether_addr, ++ keyidx, 0, igtk->pn, sizeof(igtk->pn), ++ igtk->igtk, len) < 0) { ++ wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, ++ "WPA: Failed to configure IGTK to the driver"); ++ return -1; ++ } ++ ++ sm->igtk.igtk_len = len; ++ os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); ++ ++ return 0; ++} ++#endif /* CONFIG_IEEE80211W */ ++ ++ + static int ieee80211w_set_keys(struct wpa_sm *sm, + struct wpa_eapol_ie_parse *ie) + { +@@ -864,30 +918,14 @@ static int ieee80211w_set_keys(struct wpa_sm *sm, + if (ie->igtk) { + size_t len; + const struct wpa_igtk_kde *igtk; +- u16 keyidx; ++ + len = wpa_cipher_key_len(sm->mgmt_group_cipher); + if (ie->igtk_len != WPA_IGTK_KDE_PREFIX_LEN + len) + return -1; ++ + igtk = (const struct wpa_igtk_kde *) ie->igtk; +- keyidx = WPA_GET_LE16(igtk->keyid); +- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: IGTK keyid %d " +- "pn %02x%02x%02x%02x%02x%02x", +- keyidx, MAC2STR(igtk->pn)); +- wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK", +- igtk->igtk, len); +- if (keyidx > 4095) { +- wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, +- "WPA: Invalid IGTK KeyID %d", keyidx); +- return -1; +- } +- if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), +- broadcast_ether_addr, +- keyidx, 0, igtk->pn, sizeof(igtk->pn), +- igtk->igtk, len) < 0) { +- wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, +- "WPA: Failed to configure IGTK to the driver"); ++ if (wpa_supplicant_install_igtk(sm, igtk) < 0) + return -1; +- } + } + + return 0; +@@ -2307,7 +2345,7 @@ void wpa_sm_deinit(struct wpa_sm *sm) + */ + void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) + { +- int clear_ptk = 1; ++ int clear_keys = 1; + + if (sm == NULL) + return; +@@ -2333,11 +2371,11 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) + /* Prepare for the next transition */ + wpa_ft_prepare_auth_request(sm, NULL); + +- clear_ptk = 0; ++ clear_keys = 0; + } + #endif /* CONFIG_IEEE80211R */ + +- if (clear_ptk) { ++ if (clear_keys) { + /* + * IEEE 802.11, 8.4.10: Delete PTK SA on (re)association if + * this is not part of a Fast BSS Transition. +@@ -2347,6 +2385,10 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) + os_memset(&sm->ptk, 0, sizeof(sm->ptk)); + sm->tptk_set = 0; + os_memset(&sm->tptk, 0, sizeof(sm->tptk)); ++ os_memset(&sm->gtk, 0, sizeof(sm->gtk)); ++#ifdef CONFIG_IEEE80211W ++ os_memset(&sm->igtk, 0, sizeof(sm->igtk)); ++#endif /* CONFIG_IEEE80211W */ + } + + #ifdef CONFIG_TDLS +@@ -2877,6 +2919,10 @@ void wpa_sm_drop_sa(struct wpa_sm *sm) + os_memset(sm->pmk, 0, sizeof(sm->pmk)); + os_memset(&sm->ptk, 0, sizeof(sm->ptk)); + os_memset(&sm->tptk, 0, sizeof(sm->tptk)); ++ os_memset(&sm->gtk, 0, sizeof(sm->gtk)); ++#ifdef CONFIG_IEEE80211W ++ os_memset(&sm->igtk, 0, sizeof(sm->igtk)); ++#endif /* CONFIG_IEEE80211W */ + #ifdef CONFIG_IEEE80211R + os_memset(sm->xxkey, 0, sizeof(sm->xxkey)); + os_memset(sm->pmk_r0, 0, sizeof(sm->pmk_r0)); +@@ -2949,29 +2995,11 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) + os_memset(&gd, 0, sizeof(gd)); + #ifdef CONFIG_IEEE80211W + } else if (subelem_id == WNM_SLEEP_SUBELEM_IGTK) { +- struct wpa_igtk_kde igd; +- u16 keyidx; +- +- os_memset(&igd, 0, sizeof(igd)); +- keylen = wpa_cipher_key_len(sm->mgmt_group_cipher); +- os_memcpy(igd.keyid, buf + 2, 2); +- os_memcpy(igd.pn, buf + 4, 6); +- +- keyidx = WPA_GET_LE16(igd.keyid); +- os_memcpy(igd.igtk, buf + 10, keylen); +- +- wpa_hexdump_key(MSG_DEBUG, "Install IGTK (WNM SLEEP)", +- igd.igtk, keylen); +- if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), +- broadcast_ether_addr, +- keyidx, 0, igd.pn, sizeof(igd.pn), +- igd.igtk, keylen) < 0) { +- wpa_printf(MSG_DEBUG, "Failed to install the IGTK in " +- "WNM mode"); +- os_memset(&igd, 0, sizeof(igd)); ++ const struct wpa_igtk_kde *igtk; ++ ++ igtk = (const struct wpa_igtk_kde *) (buf + 2); ++ if (wpa_supplicant_install_igtk(sm, igtk) < 0) + return -1; +- } +- os_memset(&igd, 0, sizeof(igd)); + #endif /* CONFIG_IEEE80211W */ + } else { + wpa_printf(MSG_DEBUG, "Unknown element id"); +diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h +index f653ba6..afc9e37 100644 +--- a/src/rsn_supp/wpa_i.h ++++ b/src/rsn_supp/wpa_i.h +@@ -31,6 +31,10 @@ struct wpa_sm { + u8 rx_replay_counter[WPA_REPLAY_COUNTER_LEN]; + int rx_replay_counter_set; + u8 request_counter[WPA_REPLAY_COUNTER_LEN]; ++ struct wpa_gtk gtk; ++#ifdef CONFIG_IEEE80211W ++ struct wpa_igtk igtk; ++#endif /* CONFIG_IEEE80211W */ + + struct eapol_sm *eapol; /* EAPOL state machine from upper level code */ + +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch b/system/wpa_supplicant/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch new file mode 100644 index 000000000..e2937b851 --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch @@ -0,0 +1,184 @@ +From 8280294e74846ea342389a0cd17215050fa5afe8 Mon Sep 17 00:00:00 2001 +From: Jouni Malinen +Date: Sun, 1 Oct 2017 12:12:24 +0300 +Subject: [PATCH 3/8] Extend protection of GTK/IGTK reinstallation of WNM-Sleep + Mode cases + +This extends the protection to track last configured GTK/IGTK value +separately from EAPOL-Key frames and WNM-Sleep Mode frames to cover a +corner case where these two different mechanisms may get used when the +GTK/IGTK has changed and tracking a single value is not sufficient to +detect a possible key reconfiguration. + +Signed-off-by: Jouni Malinen +--- + src/rsn_supp/wpa.c | 53 +++++++++++++++++++++++++++++++++++++--------------- + src/rsn_supp/wpa_i.h | 2 ++ + 2 files changed, 40 insertions(+), 15 deletions(-) + +diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c +index 95bd7be..7a2c68d 100644 +--- a/src/rsn_supp/wpa.c ++++ b/src/rsn_supp/wpa.c +@@ -709,14 +709,17 @@ struct wpa_gtk_data { + + static int wpa_supplicant_install_gtk(struct wpa_sm *sm, + const struct wpa_gtk_data *gd, +- const u8 *key_rsc) ++ const u8 *key_rsc, int wnm_sleep) + { + const u8 *_gtk = gd->gtk; + u8 gtk_buf[32]; + + /* Detect possible key reinstallation */ +- if (sm->gtk.gtk_len == (size_t) gd->gtk_len && +- os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) { ++ if ((sm->gtk.gtk_len == (size_t) gd->gtk_len && ++ os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) || ++ (sm->gtk_wnm_sleep.gtk_len == (size_t) gd->gtk_len && ++ os_memcmp(sm->gtk_wnm_sleep.gtk, gd->gtk, ++ sm->gtk_wnm_sleep.gtk_len) == 0)) { + wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, + "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)", + gd->keyidx, gd->tx, gd->gtk_len); +@@ -757,8 +760,14 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm, + } + os_memset(gtk_buf, 0, sizeof(gtk_buf)); + +- sm->gtk.gtk_len = gd->gtk_len; +- os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); ++ if (wnm_sleep) { ++ sm->gtk_wnm_sleep.gtk_len = gd->gtk_len; ++ os_memcpy(sm->gtk_wnm_sleep.gtk, gd->gtk, ++ sm->gtk_wnm_sleep.gtk_len); ++ } else { ++ sm->gtk.gtk_len = gd->gtk_len; ++ os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); ++ } + + return 0; + } +@@ -852,7 +861,7 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, + (wpa_supplicant_check_group_cipher(sm, sm->group_cipher, + gtk_len, gtk_len, + &gd.key_rsc_len, &gd.alg) || +- wpa_supplicant_install_gtk(sm, &gd, key_rsc))) { ++ wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0))) { + wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, + "RSN: Failed to install GTK"); + os_memset(&gd, 0, sizeof(gd)); +@@ -868,14 +877,18 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, + + #ifdef CONFIG_IEEE80211W + static int wpa_supplicant_install_igtk(struct wpa_sm *sm, +- const struct wpa_igtk_kde *igtk) ++ const struct wpa_igtk_kde *igtk, ++ int wnm_sleep) + { + size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher); + u16 keyidx = WPA_GET_LE16(igtk->keyid); + + /* Detect possible key reinstallation */ +- if (sm->igtk.igtk_len == len && +- os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) { ++ if ((sm->igtk.igtk_len == len && ++ os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) || ++ (sm->igtk_wnm_sleep.igtk_len == len && ++ os_memcmp(sm->igtk_wnm_sleep.igtk, igtk->igtk, ++ sm->igtk_wnm_sleep.igtk_len) == 0)) { + wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, + "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)", + keyidx); +@@ -900,8 +913,14 @@ static int wpa_supplicant_install_igtk(struct wpa_sm *sm, + return -1; + } + +- sm->igtk.igtk_len = len; +- os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); ++ if (wnm_sleep) { ++ sm->igtk_wnm_sleep.igtk_len = len; ++ os_memcpy(sm->igtk_wnm_sleep.igtk, igtk->igtk, ++ sm->igtk_wnm_sleep.igtk_len); ++ } else { ++ sm->igtk.igtk_len = len; ++ os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); ++ } + + return 0; + } +@@ -924,7 +943,7 @@ static int ieee80211w_set_keys(struct wpa_sm *sm, + return -1; + + igtk = (const struct wpa_igtk_kde *) ie->igtk; +- if (wpa_supplicant_install_igtk(sm, igtk) < 0) ++ if (wpa_supplicant_install_igtk(sm, igtk, 0) < 0) + return -1; + } + +@@ -1574,7 +1593,7 @@ static void wpa_supplicant_process_1_of_2(struct wpa_sm *sm, + if (wpa_supplicant_rsc_relaxation(sm, key->key_rsc)) + key_rsc = null_rsc; + +- if (wpa_supplicant_install_gtk(sm, &gd, key_rsc) || ++ if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0) || + wpa_supplicant_send_2_of_2(sm, key, ver, key_info) < 0) + goto failed; + os_memset(&gd, 0, sizeof(gd)); +@@ -2386,8 +2405,10 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) + sm->tptk_set = 0; + os_memset(&sm->tptk, 0, sizeof(sm->tptk)); + os_memset(&sm->gtk, 0, sizeof(sm->gtk)); ++ os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep)); + #ifdef CONFIG_IEEE80211W + os_memset(&sm->igtk, 0, sizeof(sm->igtk)); ++ os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep)); + #endif /* CONFIG_IEEE80211W */ + } + +@@ -2920,8 +2941,10 @@ void wpa_sm_drop_sa(struct wpa_sm *sm) + os_memset(&sm->ptk, 0, sizeof(sm->ptk)); + os_memset(&sm->tptk, 0, sizeof(sm->tptk)); + os_memset(&sm->gtk, 0, sizeof(sm->gtk)); ++ os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep)); + #ifdef CONFIG_IEEE80211W + os_memset(&sm->igtk, 0, sizeof(sm->igtk)); ++ os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep)); + #endif /* CONFIG_IEEE80211W */ + #ifdef CONFIG_IEEE80211R + os_memset(sm->xxkey, 0, sizeof(sm->xxkey)); +@@ -2986,7 +3009,7 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) + + wpa_hexdump_key(MSG_DEBUG, "Install GTK (WNM SLEEP)", + gd.gtk, gd.gtk_len); +- if (wpa_supplicant_install_gtk(sm, &gd, key_rsc)) { ++ if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 1)) { + os_memset(&gd, 0, sizeof(gd)); + wpa_printf(MSG_DEBUG, "Failed to install the GTK in " + "WNM mode"); +@@ -2998,7 +3021,7 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) + const struct wpa_igtk_kde *igtk; + + igtk = (const struct wpa_igtk_kde *) (buf + 2); +- if (wpa_supplicant_install_igtk(sm, igtk) < 0) ++ if (wpa_supplicant_install_igtk(sm, igtk, 1) < 0) + return -1; + #endif /* CONFIG_IEEE80211W */ + } else { +diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h +index afc9e37..9a54631 100644 +--- a/src/rsn_supp/wpa_i.h ++++ b/src/rsn_supp/wpa_i.h +@@ -32,8 +32,10 @@ struct wpa_sm { + int rx_replay_counter_set; + u8 request_counter[WPA_REPLAY_COUNTER_LEN]; + struct wpa_gtk gtk; ++ struct wpa_gtk gtk_wnm_sleep; + #ifdef CONFIG_IEEE80211W + struct wpa_igtk igtk; ++ struct wpa_igtk igtk_wnm_sleep; + #endif /* CONFIG_IEEE80211W */ + + struct eapol_sm *eapol; /* EAPOL state machine from upper level code */ +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch b/system/wpa_supplicant/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch new file mode 100644 index 000000000..22ee21794 --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch @@ -0,0 +1,79 @@ +From 8f82bc94e8697a9d47fa8774dfdaaede1084912c Mon Sep 17 00:00:00 2001 +From: Mathy Vanhoef +Date: Fri, 29 Sep 2017 04:22:51 +0200 +Subject: [PATCH 4/8] Prevent installation of an all-zero TK + +Properly track whether a PTK has already been installed to the driver +and the TK part cleared from memory. This prevents an attacker from +trying to trick the client into installing an all-zero TK. + +This fixes the earlier fix in commit +ad00d64e7d8827b3cebd665a0ceb08adabf15e1e ('Fix TK configuration to the +driver in EAPOL-Key 3/4 retry case') which did not take into account +possibility of an extra message 1/4 showing up between retries of +message 3/4. + +Signed-off-by: Mathy Vanhoef +--- + src/common/wpa_common.h | 1 + + src/rsn_supp/wpa.c | 5 ++--- + src/rsn_supp/wpa_i.h | 1 - + 3 files changed, 3 insertions(+), 4 deletions(-) + +diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h +index d200285..1021ccb 100644 +--- a/src/common/wpa_common.h ++++ b/src/common/wpa_common.h +@@ -215,6 +215,7 @@ struct wpa_ptk { + size_t kck_len; + size_t kek_len; + size_t tk_len; ++ int installed; /* 1 if key has already been installed to driver */ + }; + + struct wpa_gtk { +diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c +index 7a2c68d..0550a41 100644 +--- a/src/rsn_supp/wpa.c ++++ b/src/rsn_supp/wpa.c +@@ -510,7 +510,6 @@ static void wpa_supplicant_process_1_of_4(struct wpa_sm *sm, + os_memset(buf, 0, sizeof(buf)); + } + sm->tptk_set = 1; +- sm->tk_to_set = 1; + + kde = sm->assoc_wpa_ie; + kde_len = sm->assoc_wpa_ie_len; +@@ -615,7 +614,7 @@ static int wpa_supplicant_install_ptk(struct wpa_sm *sm, + enum wpa_alg alg; + const u8 *key_rsc; + +- if (!sm->tk_to_set) { ++ if (sm->ptk.installed) { + wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, + "WPA: Do not re-install same PTK to the driver"); + return 0; +@@ -659,7 +658,7 @@ static int wpa_supplicant_install_ptk(struct wpa_sm *sm, + + /* TK is not needed anymore in supplicant */ + os_memset(sm->ptk.tk, 0, WPA_TK_MAX_LEN); +- sm->tk_to_set = 0; ++ sm->ptk.installed = 1; + + if (sm->wpa_ptk_rekey) { + eloop_cancel_timeout(wpa_sm_rekey_ptk, sm, NULL); +diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h +index 9a54631..41f371f 100644 +--- a/src/rsn_supp/wpa_i.h ++++ b/src/rsn_supp/wpa_i.h +@@ -24,7 +24,6 @@ struct wpa_sm { + struct wpa_ptk ptk, tptk; + int ptk_set, tptk_set; + unsigned int msg_3_of_4_ok:1; +- unsigned int tk_to_set:1; + u8 snonce[WPA_NONCE_LEN]; + u8 anonce[WPA_NONCE_LEN]; /* ANonce from the last 1/4 msg */ + int renew_snonce; +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch b/system/wpa_supplicant/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch new file mode 100644 index 000000000..c19c4c710 --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch @@ -0,0 +1,64 @@ +From 12fac09b437a1dc8a0f253e265934a8aaf4d2f8b Mon Sep 17 00:00:00 2001 +From: Jouni Malinen +Date: Sun, 1 Oct 2017 12:32:57 +0300 +Subject: [PATCH 5/8] Fix PTK rekeying to generate a new ANonce + +The Authenticator state machine path for PTK rekeying ended up bypassing +the AUTHENTICATION2 state where a new ANonce is generated when going +directly to the PTKSTART state since there is no need to try to +determine the PMK again in such a case. This is far from ideal since the +new PTK would depend on a new nonce only from the supplicant. + +Fix this by generating a new ANonce when moving to the PTKSTART state +for the purpose of starting new 4-way handshake to rekey PTK. + +Signed-off-by: Jouni Malinen +--- + src/ap/wpa_auth.c | 24 +++++++++++++++++++++--- + 1 file changed, 21 insertions(+), 3 deletions(-) + +diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c +index 707971d..bf10cc1 100644 +--- a/src/ap/wpa_auth.c ++++ b/src/ap/wpa_auth.c +@@ -1901,6 +1901,21 @@ SM_STATE(WPA_PTK, AUTHENTICATION2) + } + + ++static int wpa_auth_sm_ptk_update(struct wpa_state_machine *sm) ++{ ++ if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) { ++ wpa_printf(MSG_ERROR, ++ "WPA: Failed to get random data for ANonce"); ++ sm->Disconnect = TRUE; ++ return -1; ++ } ++ wpa_hexdump(MSG_DEBUG, "WPA: Assign new ANonce", sm->ANonce, ++ WPA_NONCE_LEN); ++ sm->TimeoutCtr = 0; ++ return 0; ++} ++ ++ + SM_STATE(WPA_PTK, INITPMK) + { + u8 msk[2 * PMK_LEN]; +@@ -2458,9 +2473,12 @@ SM_STEP(WPA_PTK) + SM_ENTER(WPA_PTK, AUTHENTICATION); + else if (sm->ReAuthenticationRequest) + SM_ENTER(WPA_PTK, AUTHENTICATION2); +- else if (sm->PTKRequest) +- SM_ENTER(WPA_PTK, PTKSTART); +- else switch (sm->wpa_ptk_state) { ++ else if (sm->PTKRequest) { ++ if (wpa_auth_sm_ptk_update(sm) < 0) ++ SM_ENTER(WPA_PTK, DISCONNECTED); ++ else ++ SM_ENTER(WPA_PTK, PTKSTART); ++ } else switch (sm->wpa_ptk_state) { + case WPA_PTK_INITIALIZE: + break; + case WPA_PTK_DISCONNECT: +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch b/system/wpa_supplicant/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch new file mode 100644 index 000000000..e1bd5a572 --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch @@ -0,0 +1,132 @@ +From 6c4bed4f47d1960ec04981a9d50e5076aea5223d Mon Sep 17 00:00:00 2001 +From: Jouni Malinen +Date: Fri, 22 Sep 2017 11:03:15 +0300 +Subject: [PATCH 6/8] TDLS: Reject TPK-TK reconfiguration + +Do not try to reconfigure the same TPK-TK to the driver after it has +been successfully configured. This is an explicit check to avoid issues +related to resetting the TX/RX packet number. There was already a check +for this for TPK M2 (retries of that message are ignored completely), so +that behavior does not get modified. + +For TPK M3, the TPK-TK could have been reconfigured, but that was +followed by immediate teardown of the link due to an issue in updating +the STA entry. Furthermore, for TDLS with any real security (i.e., +ignoring open/WEP), the TPK message exchange is protected on the AP path +and simple replay attacks are not feasible. + +As an additional corner case, make sure the local nonce gets updated if +the peer uses a very unlikely "random nonce" of all zeros. + +Signed-off-by: Jouni Malinen +--- + src/rsn_supp/tdls.c | 38 ++++++++++++++++++++++++++++++++++++-- + 1 file changed, 36 insertions(+), 2 deletions(-) + +diff --git a/src/rsn_supp/tdls.c b/src/rsn_supp/tdls.c +index e424168..9eb9738 100644 +--- a/src/rsn_supp/tdls.c ++++ b/src/rsn_supp/tdls.c +@@ -112,6 +112,7 @@ struct wpa_tdls_peer { + u8 tk[16]; /* TPK-TK; assuming only CCMP will be used */ + } tpk; + int tpk_set; ++ int tk_set; /* TPK-TK configured to the driver */ + int tpk_success; + int tpk_in_progress; + +@@ -192,6 +193,20 @@ static int wpa_tdls_set_key(struct wpa_sm *sm, struct wpa_tdls_peer *peer) + u8 rsc[6]; + enum wpa_alg alg; + ++ if (peer->tk_set) { ++ /* ++ * This same TPK-TK has already been configured to the driver ++ * and this new configuration attempt (likely due to an ++ * unexpected retransmitted frame) would result in clearing ++ * the TX/RX sequence number which can break security, so must ++ * not allow that to happen. ++ */ ++ wpa_printf(MSG_INFO, "TDLS: TPK-TK for the peer " MACSTR ++ " has already been configured to the driver - do not reconfigure", ++ MAC2STR(peer->addr)); ++ return -1; ++ } ++ + os_memset(rsc, 0, 6); + + switch (peer->cipher) { +@@ -209,12 +224,15 @@ static int wpa_tdls_set_key(struct wpa_sm *sm, struct wpa_tdls_peer *peer) + return -1; + } + ++ wpa_printf(MSG_DEBUG, "TDLS: Configure pairwise key for peer " MACSTR, ++ MAC2STR(peer->addr)); + if (wpa_sm_set_key(sm, alg, peer->addr, -1, 1, + rsc, sizeof(rsc), peer->tpk.tk, key_len) < 0) { + wpa_printf(MSG_WARNING, "TDLS: Failed to set TPK to the " + "driver"); + return -1; + } ++ peer->tk_set = 1; + return 0; + } + +@@ -696,7 +714,7 @@ static void wpa_tdls_peer_clear(struct wpa_sm *sm, struct wpa_tdls_peer *peer) + peer->cipher = 0; + peer->qos_info = 0; + peer->wmm_capable = 0; +- peer->tpk_set = peer->tpk_success = 0; ++ peer->tk_set = peer->tpk_set = peer->tpk_success = 0; + peer->chan_switch_enabled = 0; + os_memset(&peer->tpk, 0, sizeof(peer->tpk)); + os_memset(peer->inonce, 0, WPA_NONCE_LEN); +@@ -1159,6 +1177,7 @@ skip_rsnie: + wpa_tdls_peer_free(sm, peer); + return -1; + } ++ peer->tk_set = 0; /* A new nonce results in a new TK */ + wpa_hexdump(MSG_DEBUG, "TDLS: Initiator Nonce for TPK handshake", + peer->inonce, WPA_NONCE_LEN); + os_memcpy(ftie->Snonce, peer->inonce, WPA_NONCE_LEN); +@@ -1751,6 +1770,19 @@ static int wpa_tdls_addset_peer(struct wpa_sm *sm, struct wpa_tdls_peer *peer, + } + + ++static int tdls_nonce_set(const u8 *nonce) ++{ ++ int i; ++ ++ for (i = 0; i < WPA_NONCE_LEN; i++) { ++ if (nonce[i]) ++ return 1; ++ } ++ ++ return 0; ++} ++ ++ + static int wpa_tdls_process_tpk_m1(struct wpa_sm *sm, const u8 *src_addr, + const u8 *buf, size_t len) + { +@@ -2004,7 +2036,8 @@ skip_rsn: + peer->rsnie_i_len = kde.rsn_ie_len; + peer->cipher = cipher; + +- if (os_memcmp(peer->inonce, ftie->Snonce, WPA_NONCE_LEN) != 0) { ++ if (os_memcmp(peer->inonce, ftie->Snonce, WPA_NONCE_LEN) != 0 || ++ !tdls_nonce_set(peer->inonce)) { + /* + * There is no point in updating the RNonce for every obtained + * TPK M1 frame (e.g., retransmission due to timeout) with the +@@ -2020,6 +2053,7 @@ skip_rsn: + "TDLS: Failed to get random data for responder nonce"); + goto error; + } ++ peer->tk_set = 0; /* A new nonce results in a new TK */ + } + + #if 0 +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch b/system/wpa_supplicant/rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch new file mode 100644 index 000000000..85ea1d62b --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch @@ -0,0 +1,43 @@ +From 53c5eb58e95004f86e65ee9fbfccbc291b139057 Mon Sep 17 00:00:00 2001 +From: Jouni Malinen +Date: Fri, 22 Sep 2017 11:25:02 +0300 +Subject: [PATCH 7/8] WNM: Ignore WNM-Sleep Mode Response without pending + request + +Commit 03ed0a52393710be6bdae657d1b36efa146520e5 ('WNM: Ignore WNM-Sleep +Mode Response if WNM-Sleep Mode has not been used') started ignoring the +response when no WNM-Sleep Mode Request had been used during the +association. This can be made tighter by clearing the used flag when +successfully processing a response. This adds an additional layer of +protection against unexpected retransmissions of the response frame. + +Signed-off-by: Jouni Malinen +--- + wpa_supplicant/wnm_sta.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/wpa_supplicant/wnm_sta.c b/wpa_supplicant/wnm_sta.c +index 1b3409c..67a07ff 100644 +--- a/wpa_supplicant/wnm_sta.c ++++ b/wpa_supplicant/wnm_sta.c +@@ -260,7 +260,7 @@ static void ieee802_11_rx_wnmsleep_resp(struct wpa_supplicant *wpa_s, + + if (!wpa_s->wnmsleep_used) { + wpa_printf(MSG_DEBUG, +- "WNM: Ignore WNM-Sleep Mode Response frame since WNM-Sleep Mode has not been used in this association"); ++ "WNM: Ignore WNM-Sleep Mode Response frame since WNM-Sleep Mode operation has not been requested"); + return; + } + +@@ -299,6 +299,8 @@ static void ieee802_11_rx_wnmsleep_resp(struct wpa_supplicant *wpa_s, + return; + } + ++ wpa_s->wnmsleep_used = 0; ++ + if (wnmsleep_ie->status == WNM_STATUS_SLEEP_ACCEPT || + wnmsleep_ie->status == WNM_STATUS_SLEEP_EXIT_ACCEPT_GTK_UPDATE) { + wpa_printf(MSG_DEBUG, "Successfully recv WNM-Sleep Response " +-- +2.7.4 + diff --git a/system/wpa_supplicant/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch b/system/wpa_supplicant/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch new file mode 100644 index 000000000..b9678f681 --- /dev/null +++ b/system/wpa_supplicant/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch @@ -0,0 +1,82 @@ +From b372ab0b7daea719749194dc554b26e6367603f2 Mon Sep 17 00:00:00 2001 +From: Jouni Malinen +Date: Fri, 22 Sep 2017 12:06:37 +0300 +Subject: [PATCH 8/8] FT: Do not allow multiple Reassociation Response frames + +The driver is expected to not report a second association event without +the station having explicitly request a new association. As such, this +case should not be reachable. However, since reconfiguring the same +pairwise or group keys to the driver could result in nonce reuse issues, +be extra careful here and do an additional state check to avoid this +even if the local driver ends up somehow accepting an unexpected +Reassociation Response frame. + +Signed-off-by: Jouni Malinen +--- + src/rsn_supp/wpa.c | 3 +++ + src/rsn_supp/wpa_ft.c | 8 ++++++++ + src/rsn_supp/wpa_i.h | 1 + + 3 files changed, 12 insertions(+) + +diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c +index 0550a41..2a53c6f 100644 +--- a/src/rsn_supp/wpa.c ++++ b/src/rsn_supp/wpa.c +@@ -2440,6 +2440,9 @@ void wpa_sm_notify_disassoc(struct wpa_sm *sm) + #ifdef CONFIG_TDLS + wpa_tdls_disassoc(sm); + #endif /* CONFIG_TDLS */ ++#ifdef CONFIG_IEEE80211R ++ sm->ft_reassoc_completed = 0; ++#endif /* CONFIG_IEEE80211R */ + + /* Keys are not needed in the WPA state machine anymore */ + wpa_sm_drop_sa(sm); +diff --git a/src/rsn_supp/wpa_ft.c b/src/rsn_supp/wpa_ft.c +index 205793e..d45bb45 100644 +--- a/src/rsn_supp/wpa_ft.c ++++ b/src/rsn_supp/wpa_ft.c +@@ -153,6 +153,7 @@ static u8 * wpa_ft_gen_req_ies(struct wpa_sm *sm, size_t *len, + u16 capab; + + sm->ft_completed = 0; ++ sm->ft_reassoc_completed = 0; + + buf_len = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) + + 2 + sm->r0kh_id_len + ric_ies_len + 100; +@@ -681,6 +682,11 @@ int wpa_ft_validate_reassoc_resp(struct wpa_sm *sm, const u8 *ies, + return -1; + } + ++ if (sm->ft_reassoc_completed) { ++ wpa_printf(MSG_DEBUG, "FT: Reassociation has already been completed for this FT protocol instance - ignore unexpected retransmission"); ++ return 0; ++ } ++ + if (wpa_ft_parse_ies(ies, ies_len, &parse) < 0) { + wpa_printf(MSG_DEBUG, "FT: Failed to parse IEs"); + return -1; +@@ -781,6 +787,8 @@ int wpa_ft_validate_reassoc_resp(struct wpa_sm *sm, const u8 *ies, + return -1; + } + ++ sm->ft_reassoc_completed = 1; ++ + if (wpa_ft_process_gtk_subelem(sm, parse.gtk, parse.gtk_len) < 0) + return -1; + +diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h +index 41f371f..56f88dc 100644 +--- a/src/rsn_supp/wpa_i.h ++++ b/src/rsn_supp/wpa_i.h +@@ -128,6 +128,7 @@ struct wpa_sm { + size_t r0kh_id_len; + u8 r1kh_id[FT_R1KH_ID_LEN]; + int ft_completed; ++ int ft_reassoc_completed; + int over_the_ds_in_progress; + u8 target_ap[ETH_ALEN]; /* over-the-DS target AP */ + int set_ptk_after_assoc; +-- +2.7.4 + diff --git a/system/wpa_supplicant/wpa_cli.sh b/system/wpa_supplicant/wpa_cli.sh new file mode 100644 index 000000000..0a5a6cc03 --- /dev/null +++ b/system/wpa_supplicant/wpa_cli.sh @@ -0,0 +1,33 @@ +#!/bin/sh +# Distributed under the terms of the BSD License. +# Copyright (c) 2015 Sören Tempel + +IFUP="/sbin/ifup" +IFDOWN="/sbin/ifdown" + +if [ -z "${1}" -o -z "${2}" ]; then + logger -t wpa_cli "this script should be called from wpa_cli(8)" + exit 1 +elif ! [ -x "${IFUP}" -a -x "${IFDOWN}" ]; then + logger -t wpa_cli "${IFUP} or ${IFDOWN} doesn't exist" + exit 1 +fi + +IFNAME="${1}" +ACTION="${2}" + +EXEC="" +case "${ACTION}" in + CONNECTED) + EXEC="${IFUP}" + ;; + DISCONNECTED) + EXEC="${IFDOWN}" + ;; + *) + logger -t wpa_cli "unknown action '${ACTION}'" + exit 1 +esac + +logger -t wpa_cli "interface ${IFNAME} ${ACTION}" +${EXEC} "${IFNAME}" || logger -t wpa_cli "executing '${EXEC}' failed" diff --git a/system/wpa_supplicant/wpa_supplicant.confd b/system/wpa_supplicant/wpa_supplicant.confd new file mode 100644 index 000000000..104b9dc5d --- /dev/null +++ b/system/wpa_supplicant/wpa_supplicant.confd @@ -0,0 +1,6 @@ +# conf.d file for wpa_supplicant +# +# Please check man 8 wpa_supplicant for more information about the options +# wpa_supplicant accepts. +# +wpa_supplicant_args="" diff --git a/system/wpa_supplicant/wpa_supplicant.initd b/system/wpa_supplicant/wpa_supplicant.initd new file mode 100644 index 000000000..988b267d1 --- /dev/null +++ b/system/wpa_supplicant/wpa_supplicant.initd @@ -0,0 +1,53 @@ +#!/sbin/openrc-run +# Copyright (c) 2009 Roy Marples +# All rights reserved. Released under the 2-clause BSD license. + +command=/sbin/wpa_supplicant +: ${wpa_supplicant_conf:=/etc/wpa_supplicant/wpa_supplicant.conf} +wpa_supplicant_if=${wpa_supplicant_if:+-i}$wpa_supplicant_if +command_args="$wpa_supplicant_args -B -c$wpa_supplicant_conf $wpa_supplicant_if" +name="WPA Supplicant Daemon" + +depend() +{ + need localmount + use logger dbus + after bootmisc modules + before dns dhcpcd net + keyword -shutdown +} + +find_wireless() +{ + local iface= + for iface in /sys/class/net/*; do + if [ -e "$iface"/wireless -o -e "$iface"/phy80211 ]; then + echo "${iface##*/}" + return 0 + fi + done + + return 1 +} + +append_wireless() +{ + local iface= i= + + iface=$(find_wireless) + if [ -n "$iface" ]; then + for i in $iface; do + command_args="$command_args -i$i" + done + else + eerror "Could not find a wireless interface" + fi +} + +start_pre() +{ + case " $command_args" in + *" -i"*) ;; + *) append_wireless;; + esac +} -- cgit v1.2.3-60-g2f50