.. Copyright 2013-2023 Lawrence Livermore National Security, LLC and other Spack Project Developers. See the top-level COPYRIGHT file for details. SPDX-License-Identifier: (Apache-2.0 OR MIT) .. _autotoolspackage: --------- Autotools --------- Autotools is a GNU build system that provides a build-script generator. By running the platform-independent ``./configure`` script that comes with the package, you can generate a platform-dependent Makefile. ^^^^^^ Phases ^^^^^^ The ``AutotoolsBuilder`` and ``AutotoolsPackage`` base classes come with the following phases: #. ``autoreconf`` - generate the configure script #. ``configure`` - generate the Makefiles #. ``build`` - build the package #. ``install`` - install the package Most of the time, the ``autoreconf`` phase will do nothing, but if the package is missing a ``configure`` script, ``autoreconf`` will generate one for you. The other phases run: .. code-block:: console $ ./configure --prefix=/path/to/installation/prefix $ make $ make check # optional $ make install $ make installcheck # optional Of course, you may need to add a few arguments to the ``./configure`` line. ^^^^^^^^^^^^^^^ Important files ^^^^^^^^^^^^^^^ The most important file for an Autotools-based package is the ``configure`` script. This script is automatically generated by Autotools and generates the appropriate Makefile when run. .. warning:: Watch out for fake Autotools packages! Autotools is a very popular build system, and many people are used to the classic steps to install a package: .. code-block:: console $ ./configure $ make $ make install For this reason, some developers will write their own ``configure`` scripts that have nothing to do with Autotools. These packages may not accept the same flags as other Autotools packages, so it is better to use the ``Package`` base class and create a :ref:`custom build system `. You can tell if a package uses Autotools by running ``./configure --help`` and comparing the output to other known Autotools packages. You should also look for files like: * ``configure.ac`` * ``configure.in`` * ``Makefile.am`` Packages that don't use Autotools aren't likely to have these files. ^^^^^^^^^^^^^^^^^^^^^^^^^ Build system dependencies ^^^^^^^^^^^^^^^^^^^^^^^^^ Whether or not your package requires Autotools to install depends on how the source code is distributed. Most of the time, when developers distribute tarballs, they will already contain the ``configure`` script necessary for installation. If this is the case, your package does not require any Autotools dependencies. However, a basic rule of version control systems is to never commit code that can be generated. The source code repository itself likely does not have a ``configure`` script. Developers typically write (or auto-generate) a ``configure.ac`` script that contains configuration preferences and a ``Makefile.am`` script that contains build instructions. Then, ``autoconf`` is used to convert ``configure.ac`` into ``configure``, while ``automake`` is used to convert ``Makefile.am`` into ``Makefile.in``. ``Makefile.in`` is used by ``configure`` to generate a platform-dependent ``Makefile`` for you. The following diagram provides a high-level overview of the process: .. figure:: Autoconf-automake-process.* :target: https://commons.wikimedia.org/w/index.php?curid=15581407 `GNU autoconf and automake process for generating makefiles `_ by `Jdthood` under `CC BY-SA 3.0 `_ If a ``configure`` script is not present in your tarball, you will need to generate one yourself. Luckily, Spack already has an ``autoreconf`` phase to do most of the work for you. By default, the ``autoreconf`` phase runs: .. code-block:: console $ autoreconf --install --verbose --force -I /share/aclocal In case you need to add more arguments, override ``autoreconf_extra_args`` in your ``package.py`` on class scope like this: .. code-block:: python autoreconf_extra_args = ["-Im4"] All you need to do is add a few Autotools dependencies to the package. Most stable releases will come with a ``configure`` script, but if you check out a commit from the ``master`` branch, you would want to add: .. code-block:: python depends_on("autoconf", type="build", when="@master") depends_on("automake", type="build", when="@master") depends_on("libtool", type="build", when="@master") It is typically redundant to list the ``m4`` macro processor package as a dependency, since ``autoconf`` already depends on it. """"""""""""""""""""""""""""""" Using a custom autoreconf phase """"""""""""""""""""""""""""""" In some cases, it might be needed to replace the default implementation of the autoreconf phase with one running a script interpreter. In this example, the ``bash`` shell is used to run the ``autogen.sh`` script. .. code-block:: python def autoreconf(self, spec, prefix): which("bash")("autogen.sh") """"""""""""""""""""""""""""""""""""""" patching configure or Makefile.in files """"""""""""""""""""""""""""""""""""""" In some cases, developers might need to distribute a patch that modifies one of the files used to generate ``configure`` or ``Makefile.in``. In this case, these scripts will need to be regenerated. It is preferable to regenerate these manually using the patch, and then create a new patch that directly modifies ``configure``. That way, Spack can use the secondary patch and additional build system dependencies aren't necessary. """""""""""""""""""""""""""" Old Autotools helper scripts """""""""""""""""""""""""""" Autotools based tarballs come with helper scripts such as ``config.sub`` and ``config.guess``. It is the responsibility of the developers to keep these files up to date so that they run on every platform, but for very old software releases this is impossible. In these cases Spack can help to replace these files with newer ones, without having to add the heavy dependency on ``automake``. Automatic helper script replacement is currently enabled by default on ``ppc64le`` and ``aarch64``, as these are the known cases where old scripts fail. On these targets, ``AutotoolsPackage`` adds a build dependency on ``gnuconfig``, which is a very light-weight package with newer versions of the helper files. Spack then tries to run all the helper scripts it can find in the release, and replaces them on failure with the helper scripts from ``gnuconfig``. To opt out of this feature, use the following setting: .. code-block:: python patch_config_files = False To enable it conditionally on different architectures, define a property and make the package depend on ``gnuconfig`` as a build dependency: .. code-block:: python depends_on("gnuconfig", when="@1.0:") @property def patch_config_files(self): return self.spec.satisfies("@1.0:") .. note:: On some exotic architectures it is necessary to use system provided ``config.sub`` and ``config.guess`` files. In this case, the most transparent solution is to mark the ``gnuconfig`` package as external and non-buildable, with a prefix set to the directory containing the files: .. code-block:: yaml gnuconfig: buildable: false externals: - spec: gnuconfig@master prefix: /usr/share/configure_files/ """""""""""""""" force_autoreconf """""""""""""""" If for whatever reason you really want to add the original patch and tell Spack to regenerate ``configure``, you can do so using the following setting: .. code-block:: python force_autoreconf = True This line tells Spack to wipe away the existing ``configure`` script and generate a new one. If you only need to do this for a single version, this can be done like so: .. code-block:: python @property def force_autoreconf(self): return self.version == Version("1.2.3") ^^^^^^^^^^^^^^^^^^^^^^^ Finding configure flags ^^^^^^^^^^^^^^^^^^^^^^^ Once you have a ``configure`` script present, the next step is to determine what option flags are available. These flags can be found by running: .. code-block:: console $ ./configure --help ``configure`` will display a list of valid flags separated into some or all of the following sections: * Configuration * Installation directories * Fine tuning of the installation directories * Program names * X features * System types * **Optional Features** * **Optional Packages** * **Some influential environment variables** For the most part, you can ignore all but the last 3 sections. The "Optional Features" sections lists flags that enable/disable features you may be interested in. The "Optional Packages" section often lists dependencies and the flags needed to locate them. The "environment variables" section lists environment variables that the build system uses to pass flags to the compiler and linker. ^^^^^^^^^^^^^^^^^^^^^^^^^^ Addings flags to configure ^^^^^^^^^^^^^^^^^^^^^^^^^^ For most of the flags you encounter, you will want a variant to optionally enable/disable them. You can then optionally pass these flags to the ``configure`` call by overriding the ``configure_args`` function like so: .. code-block:: python def configure_args(self): args = [] if self.spec.satisfies("+mpi"): args.append("--enable-mpi") else: args.append("--disable-mpi") return args Alternatively, you can use the :ref:`enable_or_disable ` helper: .. code-block:: python def configure_args(self): return [self.enable_or_disable("mpi")] Note that we are explicitly disabling MPI support if it is not requested. This is important, as many Autotools packages will enable options by default if the dependencies are found, and disable them otherwise. We want Spack installations to be as deterministic as possible. If two users install a package with the same variants, the goal is that both installations work the same way. See `here `__ and `here `__ for a rationale as to why these so-called "automagic" dependencies are a problem. .. note:: By default, Autotools installs packages to ``/usr``. We don't want this, so Spack automatically adds ``--prefix=/path/to/installation/prefix`` to your list of ``configure_args``. You don't need to add this yourself. ^^^^^^^^^^^^^^^^ Helper functions ^^^^^^^^^^^^^^^^ You may have noticed that most of the Autotools flags are of the form ``--enable-foo``, ``--disable-bar``, ``--with-baz=``, or ``--without-baz``. Since these flags are so common, Spack provides a couple of helper functions to make your life easier. .. _autotools_enable_or_disable: """"""""""""""""" enable_or_disable """"""""""""""""" Autotools flags for simple boolean variants can be automatically generated by calling the ``enable_or_disable`` method. This is typically used to enable or disable some feature within the package. .. code-block:: python variant( "memchecker", default=False, description="Memchecker support for debugging [degrades performance]" ) config_args.extend(self.enable_or_disable("memchecker")) In this example, specifying the variant ``+memchecker`` will generate the following configuration options: .. code-block:: console --enable-memchecker """"""""""""""" with_or_without """"""""""""""" Autotools flags for more complex variants, including boolean variants and multi-valued variants, can be automatically generated by calling the ``with_or_without`` method. .. code-block:: python variant( "schedulers", values=disjoint_sets( ("auto",), ("alps", "lsf", "tm", "slurm", "sge", "loadleveler") ).with_non_feature_values("auto", "none"), description="List of schedulers for which support is enabled; " "'auto' lets openmpi determine", ) if not spec.satisfies("schedulers=auto"): config_args.extend(self.with_or_without("schedulers")) In this example, specifying the variant ``schedulers=slurm,sge`` will generate the following configuration options: .. code-block:: console --with-slurm --with-sge ``enable_or_disable`` is actually functionally equivalent with ``with_or_without``, and accepts the same arguments and variant types; but idiomatic autotools packages often follow these naming conventions. """""""""""""""" activation_value """""""""""""""" Autotools parameters that require an option can still be automatically generated, using the ``activation_value`` argument to ``with_or_without`` (or, rarely, ``enable_or_disable``). .. code-block:: python variant( "fabrics", values=disjoint_sets( ("auto",), ("psm", "psm2", "verbs", "mxm", "ucx", "libfabric") ).with_non_feature_values("auto", "none"), description="List of fabrics that are enabled; " "'auto' lets openmpi determine", ) if not spec.satisfies("fabrics=auto"): config_args.extend(self.with_or_without("fabrics", activation_value="prefix")) ``activation_value`` accepts a callable that generates the configure parameter value given the variant value; but the special value ``prefix`` tells Spack to automatically use the dependenency's installation prefix, which is the most common use for such parameters. In this example, specifying the variant ``fabrics=libfabric`` will generate the following configuration options: .. code-block:: console --with-libfabric= """"""""""""""""""""""" The ``variant`` keyword """"""""""""""""""""""" When Spack variants and configure flags do not correspond one-to-one, the ``variant`` keyword can be passed to ``with_or_without`` and ``enable_or_disable``. For example: .. code-block:: python variant("debug_tools", default=False) config_args += self.enable_or_disable("debug-tools", variant="debug_tools") Or when one variant controls multiple flags: .. code-block:: python variant("debug_tools", default=False) config_args += self.with_or_without("memchecker", variant="debug_tools") config_args += self.with_or_without("profiler", variant="debug_tools") """""""""""""""""""" Conditional variants """""""""""""""""""" When a variant is conditional and its condition is not met on the concrete spec, the ``with_or_without`` and ``enable_or_disable`` methods will simply return an empty list. For example: .. code-block:: python variant("profiler", when="@2.0:") config_args += self.with_or_without("profiler") will neither add ``--with-profiler`` nor ``--without-profiler`` when the version is below ``2.0``. """""""""""""""""""" Activation overrides """""""""""""""""""" Finally, the behavior of either ``with_or_without`` or ``enable_or_disable`` can be overridden for specific variant values. This is most useful for multi-values variants where some of the variant values require atypical behavior. .. code-block:: python def with_or_without_verbs(self, activated): # Up through version 1.6, this option was named --with-openib. # In version 1.7, it was renamed to be --with-verbs. opt = "verbs" if self.spec.satisfies("@1.7:") else "openib" if not activated: return f"--without-{opt}" return f"--with-{opt}={self.spec['rdma-core'].prefix}" Defining ``with_or_without_verbs`` overrides the behavior of a ``fabrics=verbs`` variant, changing the configure-time option to ``--with-openib`` for older versions of the package and specifying an alternative dependency name: .. code-block:: --with-openib= ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Configure script in a sub-directory ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Occasionally, developers will hide their source code and ``configure`` script in a subdirectory like ``src``. If this happens, Spack won't be able to automatically detect the build system properly when running ``spack create``. You will have to manually change the package base class and tell Spack where the ``configure`` script resides. You can do this like so: .. code-block:: python configure_directory = "src" ^^^^^^^^^^^^^^^^^^^^^^ Building out of source ^^^^^^^^^^^^^^^^^^^^^^ Some packages like ``gcc`` recommend building their software in a different directory than the source code to prevent build pollution. This can be done using the ``build_directory`` variable: .. code-block:: python build_directory = "spack-build" By default, Spack will build the package in the same directory that contains the ``configure`` script ^^^^^^^^^^^^^^^^^^^^^^^^^ Build and install targets ^^^^^^^^^^^^^^^^^^^^^^^^^ For most Autotools packages, the usual: .. code-block:: console $ configure $ make $ make install is sufficient to install the package. However, if you need to run make with any other targets, for example, to build an optional library or build the documentation, you can add these like so: .. code-block:: python build_targets = ["all", "docs"] install_targets = ["install", "docs"] ^^^^^^^ Testing ^^^^^^^ Autotools-based packages typically provide unit testing via the ``check`` and ``installcheck`` targets. If you build your software with ``spack install --test=root``, Spack will check for the presence of a ``check`` or ``test`` target in the Makefile and run ``make check`` for you. After installation, it will check for an ``installcheck`` target and run ``make installcheck`` if it finds one. ^^^^^^^^^^^^^^^^^^^^^^ External documentation ^^^^^^^^^^^^^^^^^^^^^^ For more information on the Autotools build system, see: https://www.gnu.org/software/automake/manual/html_node/Autotools-Introduction.html