diff options
author | Kiyoshi Aman <kiyoshi.aman+adelie@gmail.com> | 2019-02-01 22:55:37 +0000 |
---|---|---|
committer | Kiyoshi Aman <kiyoshi.aman+adelie@gmail.com> | 2019-02-03 18:22:05 -0600 |
commit | 5b57d28ffb6e1ef86b50f7d05d977826eae89bfe (patch) | |
tree | 154a22fe556b49e6927197336f8bf91b12eacd5e /usr.bin/sed/sed.1 | |
download | userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.tar.gz userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.tar.bz2 userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.tar.xz userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.zip |
initial population
Diffstat (limited to 'usr.bin/sed/sed.1')
-rw-r--r-- | usr.bin/sed/sed.1 | 640 |
1 files changed, 640 insertions, 0 deletions
diff --git a/usr.bin/sed/sed.1 b/usr.bin/sed/sed.1 new file mode 100644 index 0000000..82b3cbd --- /dev/null +++ b/usr.bin/sed/sed.1 @@ -0,0 +1,640 @@ +.\" $NetBSD: sed.1,v 1.40 2014/06/25 02:05:58 uwe Exp $ +.\" Copyright (c) 1992, 1993 +.\" The Regents of the University of California. All rights reserved. +.\" +.\" This code is derived from software contributed to Berkeley by +.\" the Institute of Electrical and Electronics Engineers, Inc. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" @(#)sed.1 8.2 (Berkeley) 12/30/93 +.\" $FreeBSD: head/usr.bin/sed/sed.1 259132 2013-12-09 18:57:20Z eadler $ +.\" +.Dd June 18, 2014 +.Dt SED 1 +.Os +.Sh NAME +.Nm sed +.Nd stream editor +.Sh SYNOPSIS +.Nm +.Op Fl aElnru +.Ar command +.Op Ar +.Nm +.Op Fl aElnru +.Op Fl e Ar command +.Op Fl f Ar command_file +.Op Fl I Ns Op Ar extension +.Op Fl i Ns Op Ar extension +.Op Ar +.Sh DESCRIPTION +The +.Nm +utility reads the specified files, or the standard input if no files +are specified, modifying the input as specified by a list of commands. +The input is then written to the standard output. +.Pp +A single command may be specified as the first argument to +.Nm . +Multiple commands may be specified by using the +.Fl e +or +.Fl f +options. +All commands are applied to the input in the order they are specified +regardless of their origin. +.Pp +The following options are available: +.Bl -tag -width indent +.It Fl a +The files listed as parameters for the +.Dq w +functions are created (or truncated) before any processing begins, +by default. +The +.Fl a +option causes +.Nm +to delay opening each file until a command containing the related +.Dq w +function is applied to a line of input. +.It Fl E +Interpret regular expressions as extended (modern) regular expressions +rather than basic regular expressions (BRE's). +The +.Xr re_format 7 +manual page fully describes both formats. +.It Fl e Ar command +Append the editing commands specified by the +.Ar command +argument +to the list of commands. +.It Fl f Ar command_file +Append the editing commands found in the file +.Ar command_file +to the list of commands. +The editing commands should each be listed on a separate line. +.It Fl I Ns Op Ar extension +Edit files in-place, saving backups with the specified +.Ar extension . +If no +.Ar extension +is given, no backup will be saved. +It is not recommended to give a zero-length +.Ar extension +when in-place editing files, as you risk corruption or partial content +in situations where disk space is exhausted, etc. +.Pp +Note that in-place editing with +.Fl I +still takes place in a single continuous line address space covering +all files, although each file preserves its individuality instead of +forming one output stream. +The line counter is never reset between files, address ranges can span +file boundaries, and the +.Dq $ +address matches only the last line of the last file. +(See +.Sx "Sed Addresses" . ) +That can lead to unexpected results in many cases of in-place editing, +where using +.Fl i +is desired. +.It Fl i Ns Op Ar extension +Edit files in-place similarly to +.Fl I , +but treat each file independently from other files. +In particular, line numbers in each file start at 1, +the +.Dq $ +address matches the last line of the current file, +and address ranges are limited to the current file. +(See +.Sx "Sed Addresses" . ) +The net result is as though each file were edited by a separate +.Nm +instance. +.It Fl l +Make output line buffered. +.It Fl n +By default, each line of input is echoed to the standard output after +all of the commands have been applied to it. +The +.Fl n +option suppresses this behavior. +.It Fl r +Same as +.Fl E +for compatibility with GNU sed. +.It Fl u +Make output unbuffered. +.El +.Pp +The form of a +.Nm +command is as follows: +.Pp +.Dl [address[,address]]function[arguments] +.Pp +Whitespace may be inserted before the first address and the function +portions of the command. +.Pp +Normally, +.Nm +cyclically copies a line of input, not including its terminating newline +character, into a +.Em "pattern space" , +(unless there is something left after a +.Dq D +function), +applies all of the commands with addresses that select that pattern space, +copies the pattern space to the standard output, appending a newline, and +deletes the pattern space. +.Pp +Some of the functions use a +.Em "hold space" +to save all or part of the pattern space for subsequent retrieval. +.Ss "Sed Addresses" +An address is not required, but if specified must have one of the +following formats: +.Bl -bullet -offset indent +.It +a number that counts +input lines +cumulatively across input files (or in each file independently +if a +.Fl i +option is in effect); +.It +a dollar +.Pq Dq $ +character that addresses the last line of input (or the last line +of the current file if a +.Fl i +option was specified); +.It +a context address +that consists of a regular expression preceded and followed by a +delimiter. +The closing delimiter can also optionally be followed by the +.Dq i +character, to indicate that the regular expression is to be matched +in a case-insensitive way. +.El +.Pp +A command line with no addresses selects every pattern space. +.Pp +A command line with one address selects all of the pattern spaces +that match the address. +.Pp +A command line with two addresses selects an inclusive range. +This +range starts with the first pattern space that matches the first +address. +The end of the range is the next following pattern space +that matches the second address. +If the second address is a number +less than or equal to the line number first selected, only that +line is selected. +The number in the second address may be prefixed with a +.Pq Dq \&+ +to specify the number of lines to match after the first pattern. +In the case when the second address is a context +address, +.Nm +does not re-match the second address against the +pattern space that matched the first address. +Starting at the +first line following the selected range, +.Nm +starts looking again for the first address. +.Pp +Editing commands can be applied to non-selected pattern spaces by use +of the exclamation character +.Pq Dq \&! +function. +.Ss "Sed Regular Expressions" +The regular expressions used in +.Nm , +by default, are basic regular expressions (BREs, see +.Xr re_format 7 +for more information), but extended (modern) regular expressions can be used +instead if the +.Fl E +flag is given. +In addition, +.Nm +has the following two additions to regular expressions: +.Pp +.Bl -enum -compact +.It +In a context address, any character other than a backslash +.Pq Dq \e +or newline character may be used to delimit the regular expression. +The opening delimiter needs to be preceded by a backslash +unless it is a slash. +For example, the context address +.Li \exabcx +is equivalent to +.Li /abc/ . +Also, putting a backslash character before the delimiting character +within the regular expression causes the character to be treated literally. +For example, in the context address +.Li \exabc\exdefx , +the RE delimiter is an +.Dq x +and the second +.Dq x +stands for itself, so that the regular expression is +.Dq abcxdef . +.Pp +.It +The escape sequence \en matches a newline character embedded in the +pattern space. +You cannot, however, use a literal newline character in an address or +in the substitute command. +.El +.Pp +One special feature of +.Nm +regular expressions is that they can default to the last regular +expression used. +If a regular expression is empty, i.e., just the delimiter characters +are specified, the last regular expression encountered is used instead. +The last regular expression is defined as the last regular expression +used as part of an address or substitute command, and at run-time, not +compile-time. +For example, the command +.Dq /abc/s//XXX/ +will substitute +.Dq XXX +for the pattern +.Dq abc . +.Ss "Sed Functions" +In the following list of commands, the maximum number of permissible +addresses for each command is indicated by [0addr], [1addr], or [2addr], +representing zero, one, or two addresses. +.Pp +The argument +.Em text +consists of one or more lines. +To embed a newline in the text, precede it with a backslash. +Other backslashes in text are deleted and the following character +taken literally. +.Pp +The +.Dq r +and +.Dq w +functions take an optional file parameter, which should be separated +from the function letter by white space. +Each file given as an argument to +.Nm +is created (or its contents truncated) before any input processing begins. +.Pp +The +.Dq b , +.Dq r , +.Dq s , +.Dq t , +.Dq w , +.Dq y , +.Dq \&! , +and +.Dq \&: +functions all accept additional arguments. +The following synopses indicate which arguments have to be separated from +the function letters by white space characters. +.Pp +Two of the functions take a function-list. +This is a list of +.Nm +functions separated by newlines, as follows: +.Bd -literal -offset indent +{ function + function + ... + function +} +.Ed +.Pp +The +.Dq { +can be preceded by white space and can be followed by white space. +The function can be preceded by white space. +The terminating +.Dq } +must be preceded by a newline, and may also be preceded by white space. +.Pp +.Bl -tag -width "XXXXXX" -compact +.It [2addr] function-list +Execute function-list only when the pattern space is selected. +.Pp +.It [1addr]a\e +.It text +Write +.Em text +to standard output immediately before each attempt to read a line of input, +whether by executing the +.Dq N +function or by beginning a new cycle. +.Pp +.It [2addr]b[label] +Branch to the +.Dq \&: +function with the specified label. +If the label is not specified, branch to the end of the script. +.Pp +.It [2addr]c\e +.It text +Delete the pattern space. +With 0 or 1 address or at the end of a 2-address range, +.Em text +is written to the standard output. +.Pp +.It [2addr]d +Delete the pattern space and start the next cycle. +.Pp +.It [2addr]D +Delete the initial segment of the pattern space through the first +newline character and start the next cycle. +.Pp +.It [2addr]g +Replace the contents of the pattern space with the contents of the +hold space. +.Pp +.It [2addr]G +Append a newline character followed by the contents of the hold space +to the pattern space. +.Pp +.It [2addr]h +Replace the contents of the hold space with the contents of the +pattern space. +.Pp +.It [2addr]H +Append a newline character followed by the contents of the pattern space +to the hold space. +.Pp +.It [1addr]i\e +.It text +Write +.Em text +to the standard output. +.Pp +.It [2addr]l +(The letter ell.) +Write the pattern space to the standard output in a visually unambiguous +form. +This form is as follows: +.Pp +.Bl -tag -width "carriage-returnXX" -offset indent -compact +.It backslash +\e\e +.It alert +\ea +.It form-feed +\ef +.It carriage-return +\er +.It tab +\et +.It vertical tab +\ev +.El +.Pp +Nonprintable characters are written as three-digit octal numbers (with a +preceding backslash) for each byte in the character (most significant byte +first). +Long lines are folded, with the point of folding indicated by displaying +a backslash followed by a newline. +The end of each line is marked with a +.Dq $ . +.Pp +.It [2addr]n +Write the pattern space to the standard output if the default output has +not been suppressed, and replace the pattern space with the next line of +input. +.Pp +.It [2addr]N +Append the next line of input to the pattern space, using an embedded +newline character to separate the appended material from the original +contents. +Note that the current line number changes. +.Pp +.It [2addr]p +Write the pattern space to standard output. +.Pp +.It [2addr]P +Write the pattern space, up to the first newline character to the +standard output. +.Pp +.It [1addr]q +Branch to the end of the script and quit without starting a new cycle. +.Pp +.It [1addr]r file +Copy the contents of +.Em file +to the standard output immediately before the next attempt to read a +line of input. +If +.Em file +cannot be read for any reason, it is silently ignored and no error +condition is set. +.Pp +.It [2addr]s/regular expression/replacement/flags +Substitute the replacement string for the first instance of the regular +expression in the pattern space. +Any character other than backslash or newline can be used instead of +a slash to delimit the RE and the replacement. +Within the RE and the replacement, the RE delimiter itself can be used as +a literal character if it is preceded by a backslash. +.Pp +An ampersand +.Pq Dq & +appearing in the replacement is replaced by the string matching the RE. +The special meaning of +.Dq & +in this context can be suppressed by preceding it by a backslash. +The string +.Dq \e# , +where +.Dq # +is a digit, is replaced by the text matched +by the corresponding backreference expression (see +.Xr re_format 7 ) . +.Pp +A line can be split by substituting a newline character into it. +To specify a newline character in the replacement string, precede it with +a backslash. +.Pp +The value of +.Em flags +in the substitute function is zero or more of the following: +.Bl -tag -width "XXXXXX" -offset indent +.It Ar N +Make the substitution only for the +.Ar N Ns 'th +occurrence of the regular expression in the pattern space. +.It g +Make the substitution for all non-overlapping matches of the +regular expression, not just the first one. +.It p +Write the pattern space to standard output if a replacement was made. +If the replacement string is identical to that which it replaces, it +is still considered to have been a replacement. +.It w Em file +Append the pattern space to +.Em file +if a replacement was made. +If the replacement string is identical to that which it replaces, it +is still considered to have been a replacement. +.It i or I +Match the regular expression in a case-insensitive way. +.El +.Pp +.It [2addr]t [label] +Branch to the +.Dq \&: +function bearing the label if any substitutions have been made since the +most recent reading of an input line or execution of a +.Dq t +function. +If no label is specified, branch to the end of the script. +.Pp +.It [2addr]w Em file +Append the pattern space to the +.Em file . +.Pp +.It [2addr]x +Swap the contents of the pattern and hold spaces. +.Pp +.It [2addr]y/string1/string2/ +Replace all occurrences of characters in +.Em string1 +in the pattern space with the corresponding characters from +.Em string2 . +Any character other than a backslash or newline can be used instead of +a slash to delimit the strings. +Within +.Em string1 +and +.Em string2 , +a backslash followed by any character other than a newline is that literal +character, and a backslash followed by an ``n'' is replaced by a newline +character. +.Pp +.It [2addr]!function +.It [2addr]!function-list +Apply the function or function-list only to the lines that are +.Em not +selected by the address(es). +.Pp +.It [0addr]:label +This function does nothing; it bears a label to which the +.Dq b +and +.Dq t +commands may branch. +.Pp +.It [1addr]= +Write the line number to the standard output followed by a newline +character. +.Pp +.It [0addr] +Empty lines are ignored. +.Pp +.It [0addr]# +The +.Dq # +and the remainder of the line are ignored (treated as a comment), with +the single exception that if the first two characters in the file are +.Dq #n , +the default output is suppressed. +This is the same as specifying the +.Fl n +option on the command line. +.El +.Sh ENVIRONMENT +The +.Ev COLUMNS , LANG , LC_ALL , LC_CTYPE +and +.Ev LC_COLLATE +environment variables affect the execution of +.Nm +as described in +.Xr environ 7 . +.Sh EXIT STATUS +.Ex -std +.Sh SEE ALSO +.Xr awk 1 , +.Xr ed 1 , +.Xr grep 1 , +.Xr regex 3 , +.Xr re_format 7 +.Sh STANDARDS +The +.Nm +utility is expected to be a superset of the +.St -p1003.2 +specification. +.Pp +The +.Fl a , E , I , +and +.Fl i +options, the prefixing +.Dq \&+ +in the second member of an address range, +as well as the +.Dq I +flag to the address regular expression and substitution command are +non-standard +.Fx +extensions and may not be available on other operating systems. +.Sh HISTORY +A +.Nm +command, written by +.An L. E. McMahon , +appeared in +.At v7 . +.Sh AUTHORS +.An "Diomidis D. Spinellis" Aq dds@FreeBSD.org +.Sh BUGS +Multibyte characters containing a byte with value 0x5C +.Tn ( ASCII +.Ql \e ) +may be incorrectly treated as line continuation characters in arguments to the +.Dq a , +.Dq c +and +.Dq i +commands. +Multibyte characters cannot be used as delimiters with the +.Dq s +and +.Dq y +commands. |