From 5b57d28ffb6e1ef86b50f7d05d977826eae89bfe Mon Sep 17 00:00:00 2001 From: Kiyoshi Aman Date: Fri, 1 Feb 2019 22:55:37 +0000 Subject: initial population --- bin/stty/stty.1 | 635 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 635 insertions(+) create mode 100644 bin/stty/stty.1 (limited to 'bin/stty/stty.1') diff --git a/bin/stty/stty.1 b/bin/stty/stty.1 new file mode 100644 index 0000000..8901f61 --- /dev/null +++ b/bin/stty/stty.1 @@ -0,0 +1,635 @@ +.\" $NetBSD: stty.1,v 1.45 2017/10/30 15:38:52 wiz Exp $ +.\" +.\" Copyright (c) 1990, 1993, 1994 +.\" The Regents of the University of California. All rights reserved. +.\" +.\" This code is derived from software contributed to Berkeley by +.\" the Institute of Electrical and Electronics Engineers, Inc. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" @(#)stty.1 8.5 (Berkeley) 6/1/94 +.\" +.Dd August 15, 2016 +.Dt STTY 1 +.Os +.Sh NAME +.Nm stty +.Nd set options for a terminal device interface +.Sh SYNOPSIS +.Nm +.Op Fl a | Fl e | Fl g +.Op Fl f Ar file +.Op operand ... +.Sh DESCRIPTION +The +.Nm +utility sets or reports on terminal +characteristics for the device that is its standard input. +If no options or operands are specified, it reports the settings of a subset +of characteristics as well as additional ones if they differ from their +default values. +Otherwise it modifies +the terminal state according to the specified arguments. +Some combinations of arguments are mutually +exclusive on some terminal types. +.Pp +The following options are available: +.Bl -tag -width XfXfileXX +.It Fl a +Display all the current settings for the terminal to standard output +as per +.St -p1003.2 . +.It Fl e +Display all the current settings for the terminal to standard output +in the traditional +.Bx +.Dq all +and +.Dq everything +formats. +.It Fl f Ar file +Open and use the terminal named by +.Ar file +rather than using standard input. +The file is opened using the +.Dv O_NONBLOCK +flag of +.Fn open , +making it possible to +set or display settings on a terminal that might otherwise +block on the open. +.It Fl g +Display all the current settings for the terminal to standard output +in a form that may be used as an argument to a subsequent invocation of +.Nm +to restore the current terminal state as per +.St -p1003.2 . +.El +.Pp +The following arguments are available to set the terminal +characteristics: +.Ss Control Modes +Control mode flags affect hardware characteristics associated with the +terminal. +This corresponds to the +.Fa c_cflag +of the +.Xr termios 4 +structure. +.Bl -tag -width Fl +.It Cm parenb Pq Fl parenb +Enable (disable) parity generation +and detection. +.It Cm parodd Pq Fl parodd +Select odd (even) parity. +.It Cm cs5 cs6 cs7 cs8 +Select character size, if possible. +.It Ar number +Set terminal baud rate to +.Ar number , +if possible. +If the +baud rate is set to zero, modem +control is no longer +asserted. +.It Cm ispeed Ar number +Set terminal input baud rate to +.Ar number , +if possible. +If the +input baud rate is set to zero, the +input baud rate is set to the +value of the output baud +rate. +.It Cm ospeed Ar number +Set terminal output baud rate to +.Ar number , +if possible. +If +the output baud rate is set to +zero, modem control is +no longer asserted. +.It Cm speed Ar number +This sets both +.Cm ispeed +and +.Cm ospeed +to +.Ar number . +.It Cm hupcl Pq Fl hupcl +Stop asserting modem control +(do not stop asserting modem control) on last close. +.It Cm hup Pq Fl hup +Same as hupcl +.Pq Fl hupcl . +.It Cm cstopb Pq Fl cstopb +Use two (one) stop bits per character. +.It Cm cread Pq Fl cread +Enable (disable) the receiver. +.It Cm clocal Pq Fl clocal +Assume a line without (with) modem +control. +.It Cm crtscts Pq Fl crtscts +Enable RTS/CTS flow control. +.It Cm cdtrcts Pq Fl cdtrcts +Enable DTR/CTS flow control (if supported). +.El +.Ss Input Modes +This corresponds to the +.Fa c_iflag +of the +.Xr termios 4 +structure. +.Bl -tag -width Fl +.It Cm ignbrk Pq Fl ignbrk +Ignore (do not ignore) break on +input. +.It Cm brkint Pq Fl brkint +Signal (do not signal) +.Dv INTR +on +break. +.It Cm ignpar Pq Fl ignpar +Ignore (do not ignore) parity +errors. +.It Cm parmrk Pq Fl parmrk +Mark (do not mark) parity errors. +.It Cm inpck Pq Fl inpck +Enable (disable) input parity +checking. +.It Cm istrip Pq Fl istrip +Strip (do not strip) input characters +to seven bits. +.It Cm inlcr Pq Fl inlcr +Map (do not map) +.Dv NL +to +.Dv CR +on input. +.It Cm igncr Pq Fl igncr +Ignore (do not ignore) +.Dv CR +on input. +.It Cm icrnl Pq Fl icrnl +Map (do not map) +.Dv CR +to +.Dv NL +on input. +.It Cm ixon Pq Fl ixon +Enable (disable) +.Dv START/STOP +output +control. +Output from the system is +stopped when the system receives +.Dv STOP +and started when the system +receives +.Dv START , +or if +.Cm ixany +is set, any character restarts output. +.It Cm ixoff Pq Fl ixoff +Request that the system send (not +send) +.Dv START/STOP +characters when +the input queue is nearly +empty/full. +.It Cm ixany Pq Fl ixany +Allow any character (allow only +.Dv START ) +to restart output. +.It Cm imaxbel Pq Fl imaxbel +The system imposes a limit of +.Dv MAX_INPUT +(currently 255) characters in the input queue. +If +.Cm imaxbel +is set and the input queue limit has been reached, +subsequent input causes the system to send an ASCII BEL +character to the output queue (the terminal beeps at you). +Otherwise, +if +.Cm imaxbel +is unset and the input queue is full, the next input character causes +the entire input and output queues to be discarded. +.El +.Ss Output Modes +This corresponds to the +.Fa c_oflag +of the +.Xr termios 4 +structure. +.Bl -tag -width Fl +.It Cm opost Pq Fl opost +Post-process output (do not +post-process output; ignore all other +output modes). +.It Cm onlcr Pq Fl onlcr +Map (do not map) +.Dv NL +to +.Dv CR-NL +on output. +.It Cm ocrnl Pq Fl ocrnl +Map (do not map) +.Dv CR +to +.Dv NL +on output. +.It Cm oxtabs Pq Fl oxtabs +Expand (do not expand) tabs to spaces on output. +.It Cm onocr Pq Fl onocr +Do not (do) output CRs at column zero. +.It Cm onlret Pq Fl onlret +On the terminal NL performs (does not perform) the CR function. +.El +.Ss Local Modes +Local mode flags (lflags) affect various and sundry characteristics of terminal +processing. +Historically the term "local" pertained to new job control features +implemented by Jim Kulp on a PDP-11/70 at IIASA. +Later the driver ran on the first VAX at Evans Hall, UC Berkeley, +where the job control details were greatly modified but the structure +definitions and names remained essentially unchanged. +The second interpretation of the +.Sq l +in lflag +is +.Dq line discipline flag , +which corresponds to the +.Fa c_lflag +of the +.Xr termios 4 +structure. +.Bl -tag -width Fl +.It Cm isig Pq Fl isig +Enable (disable) the checking of +characters against the special control +characters +.Dv INTR , QUIT , +and +.Dv SUSP . +.It Cm icanon Pq Fl icanon +Enable (disable) canonical input +.Dv ( ERASE +and +.Dv KILL +processing). +.It Cm iexten Pq Fl iexten +Enable (disable) any implementation +defined special control characters +not currently controlled by icanon, +isig, or ixon. +.It Cm echo Pq Fl echo +Echo back (do not echo back) every +character typed. +.It Cm echoe Pq Fl echoe +The +.Dv ERASE +character shall (shall +not) visually erase the last character +in the current line from the +display, if possible. +.It Cm echok Pq Fl echok +Echo (do not echo) +.Dv NL +after +.Dv KILL +character. +.It Cm echoke Pq Fl echoke +The +.Dv KILL +character shall (shall +not) visually erase +the current line from the +display, if possible. +.It Cm echonl Pq Fl echonl +Echo (do not echo) +.Dv NL , +even if echo +is disabled. +.It Cm echoctl Pq Fl echoctl +If +.Cm echoctl +is set, echo control characters as ^X. +Otherwise control characters echo as themselves. +.It Cm echoprt Pq Fl echoprt +For printing terminals. +If set, echo erased characters backwards within +.Dq \e +and +.Dq / . +Otherwise, disable this feature. +.It Cm noflsh Pq Fl noflsh +Disable (enable) flush after +.Dv INTR , QUIT , SUSP . +.It Cm tostop Pq Fl tostop +Send (do not send) +.Dv SIGTTOU +for background output. +This causes background jobs to stop if they attempt terminal output. +.It Cm altwerase Pq Fl altwerase +Use (do not use) an alternative word erase algorithm when processing +.Dv WERASE +characters. +This alternative algorithm considers sequences of +alphanumeric/underscores as words. +It also skips the first preceding character in its classification +(as a convenience since the one preceding character could have been +erased with simply an +.Dv ERASE +character). +.It Cm mdmbuf Pq Fl mdmbuf +If set, flow control output based on condition of Carrier Detect. +Otherwise writes return an error if Carrier Detect is low (and Carrier +is not being ignored with the +.Dv CLOCAL +flag). +.It Cm flusho Pq Fl flusho +Indicates output is (is not) being discarded. +.It Cm pendin Pq Fl pendin +Indicates input is (is not) pending after a switch from non-canonical +to canonical mode and will be re-input when a read becomes pending +or more input arrives. +.El +.Ss Control Characters +.Bl -tag -width Fl +.It Ar control-character Ar string +Set +.Ar control-character +to string +.Ar string . +If the string is a single character, +then the control character is set to +that character. +If the string is the +two character sequence "^-" or the +string "undef", then the control character +is disabled (i.e., set to +.Bro Dv _POSIX_VDISABLE Brc ) . +.Pp +Recognized control characters: +.Bd -ragged -offset indent +.Bl -column character Subscript Description +.It control- Ta "" Ta "" +.It character Subscript Description +.It _________ _________ _______________ +.It eof Ta VEOF Ta EOF No character +.It eol Ta VEOL Ta EOL No character +.It eol2 Ta VEOL2 Ta EOL2 No character +.It erase Ta VERASE Ta ERASE No character +.It werase Ta VWERASE Ta WERASE No character +.It kill Ta VKILL Ta KILL No character +.It reprint Ta VREPRINT Ta REPRINT No character +.It intr Ta VINTR Ta INTR No character +.It quit Ta VQUIT Ta QUIT No character +.It susp Ta VSUSP Ta SUSP No character +.It dsusp Ta VDSUSP Ta DSUSP No character +.It start Ta VSTART Ta START No character +.It stop Ta VSTOP Ta STOP No character +.It lnext Ta VLNEXT Ta LNEXT No character +.It status Ta VSTATUS Ta STATUS No character +.It discard Ta VDISCARD Ta DISCARD No character +.El +.Ed +.It Cm min Ar number +.It Cm time Ar number +Set the value of min or time to +.Ar number . +.Dv MIN +and +.Dv TIME +are used in +Non-Canonical mode input processing +(-icanon). +.El +.Ss Combination Modes +.Bl -tag -width Fl +.It Ar saved settings +Set the current terminal characteristics to the saved settings +produced by the +.Fl g +option. +.It Cm evenp No or Cm parity +Enable parenb and cs7; disable parodd. +.It Cm oddp +Enable parenb, cs7, and parodd. +.It Fl parity , evenp , oddp +Disable parenb, and set cs8. +.It Cm \&nl Pq Fl \&nl +Enable (disable) icrnl. +In addition +-nl unsets inlcr and igncr. +.It Cm ek +Reset +.Dv ERASE +and +.Dv KILL +characters back to system defaults. +.It Cm sane +Resets all modes to reasonable values for interactive terminal use. +.It Cm insane +Sets all modes to random values, which are very likely +.Pq but not guaranteed +to be unreasonable for interactive terminal use. +.It Cm tty +Set the line discipline to the standard terminal line discipline +.Dv TTYDISC . +.It Cm crt Pq Fl crt +Set (disable) all modes suitable for a CRT display device. +.It Cm kerninfo Pq Fl kerninfo +Enable (disable) the system generated status line associated with +processing a +.Dv STATUS +character (usually set to ^T). +The status line consists of the +system load average, the current command name, its process ID, the +event the process is waiting on (or the status of the process), the user +and system times, percent CPU, and current memory usage. +.It Cm cols Ar number +The terminal size is recorded as having +.Ar number +columns. +.It Cm columns Ar number +An alias for +.Cm cols . +.It Cm rows Ar number +The terminal size is recorded as having +.Ar number +rows. +.It Cm dec +Set modes suitable for users of Digital Equipment Corporation systems +.Dv ( ERASE , +.Dv KILL , +and +.Dv INTR +characters are set to ^?, ^U, and ^C; +.Dv ixany +is disabled, and +.Dv crt +is enabled). +.It Cm extproc Pq Fl extproc +If set, this flag indicates that some amount of terminal processing is being +performed by either the terminal hardware or by the remote side connected +to a pty. +.It Cm raw Pq Fl raw +If set, change the modes of the terminal so that no input or output processing +is performed. +If unset, change the modes of the terminal to some reasonable +state that performs input and output processing. +Note that since the terminal driver no longer has a single +.Dv RAW +bit, it is not possible to intuit what flags were set prior to setting +.Cm raw . +This means that unsetting +.Cm raw +may not put back all the setting that were previously in effect. +To set the terminal into a raw state and then accurately restore it, the following +shell code is recommended: +.Bd -literal -offset indent +save_state=$(stty -g) +stty raw +\&... +stty "$save_state" +.Ed +.It Cm size +The size of the terminal is printed as two numbers on a single line, +first rows, then columns. +.El +.Ss Compatibility Modes +These modes remain for compatibility with the previous version of +the +.Nm +utility. +.Bl -tag -width Fl +.It Cm all +Reports all the terminal modes as with +.Cm stty Fl a +except that the control characters are printed in a columnar format. +.It Cm everything +Same as +.Cm all . +.It Cm cooked +Same as +.Cm sane . +.It Cm cbreak +If set, enables +.Cm brkint , ixon , imaxbel , opost , +.Cm isig , iexten , +and +.Fl icanon . +If unset, same as +.Cm sane . +.It Cm new +Same as +.Cm tty . +.It Cm old +Same as +.Cm tty . +.It Cm newcrt Pq Fl newcrt +Same as +.Cm crt . +.It Cm pass8 +The converse of +.Cm parity . +.It Cm tandem Pq Fl tandem +Same as +.Cm ixoff . +.It Cm decctlq Pq Fl decctlq +The converse of +.Cm ixany . +.It Cm crterase Pq Fl crterase +Same as +.Cm echoe . +.It Cm crtbs Pq Fl crtbs +Same as +.Cm echoe . +.It Cm crtkill Pq Fl crtkill +Same as +.Cm echoke . +.It Cm ctlecho Pq Fl ctlecho +Same as +.Cm echoctl . +.It Cm prterase Pq Fl prterase +Same as +.Cm echoprt . +.It Cm litout Pq Fl litout +The converse of +.Cm opost . +.It Cm tabs Pq Fl tabs +The converse of +.Cm oxtabs . +.It Cm brk Ar value +Same as the control character +.Cm eol . +.It Cm flush Ar value +Same as the control character +.Cm discard . +.It Cm rprnt Ar value +Same as the control character +.Cm reprint . +.El +.Ss Control operations +These operations are not modes, but rather commands to be performed by +the tty layer. +.Bl -tag -width Fl +.It Cm ostart +Performs a "start output" operation, as normally done by an +incoming START character when +.Cm ixon +is set. +.It Cm ostop +Performs a "stop output" operation, as normally done by an +incoming STOP character when +.Cm ixon +is set. +.El +.Sh EXIT STATUS +.Ex -std +.Sh SEE ALSO +.Xr termios 4 , +.Xr tty 4 +.Sh STANDARDS +The +.Nm +utility is expected to be +.St -p1003.2 +compatible. +The +.Fl e +and +.Fl f +flags are +extensions to the standard, as are the operands mentioned in the control +operations section. +.Sh HISTORY +An +.Nm +utility appeared in +.At v2 . -- cgit v1.2.3-60-g2f50