summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-09-24sample.APKBUILD: use https for sourceforge download linksprspkt1-1/+1
2018-09-24newapkbuild: use https for sourceforge download linksprspkt1-1/+1
2018-07-29newapkbuild: fix default check function for python3Jakub Jirutka1-1/+1
`setup.py check` does not run package tests, it performs just some check of the package metadata. The correct command is `setup.py test`.
2018-06-22==== release 3.2.0 ====v3.2.0Natanael Copa1-1/+1
2018-06-21newapkbuild: check arguments and improve usage()Oliver Smith1-18/+44
Changes: * argument sanity checks: * `PKGNAME[-PKGVER] | SRCURL` * check if missing * check if specified more than once (see below) * specifying more than one buildtype flag * `-n` (set pkgname) without using SRCURL as last argument * `-s` (sourceforge source) without using PKGNAME as last argument * Typo fix: exist -> exists * `usage()`: * always print PKGNAME and PKGDESC (instead of NAME and DESC, NAME was used in one place and PKGNAME in another) * link to <https://spdx.org/licenses/> * `-m` (meson) flag was missing in short usage line at the top * indicate that the buildtypes are exclusive * `-c` flag: remove "to new directory" wording to make the message shorter (this should be obvious) * remove empty line at the end NOTE: Before this commit, the `PKGNAME[-PKGVER] | SRCURL` was allowed to be specified more than once, and the code looped over the arguments. But this was not documented in `usage()` and had unexpected results: ``` $ newapkbuild first second third $ tree . ___ first ___ APKBUILD ___ first ___ ___ APKBUILD ___ ___ first ___ ___ ___ APKBUILD ___ ___ ___ src ___ ___ src ___ src ```
2018-05-31==== release 3.2.0_rc2 ====v3.2.0_rc2Natanael Copa1-1/+1
2018-05-31abuild: fix race when strippingNatanael Copa1-0/+4
scanelf may pick up tempfiles created by strip or setfattr since it runs in spearate process and pipes the out to a subshell. This causes a race and may lead to the while loop attempt to strip seomthing that no longer exists. We fix that by test if file exists before try manipulate it. We could have written he file list to a temp file first, but this way we benefit from multiple cores working in parallel.
2018-05-24newapkbuild: move checksum call to after fetchA. Wilcox1-2/+1
unpack will no longer unpack without a checksum, even with -f. This means that newapkbuild will not be able to deduce what kind of build system is contained within, so the templates for CMake, Perl, etc are never used. This patch ensures checksumming is done right after fetch, so that unpack works properly.
2018-05-24newapkbuild: fix typoA. Wilcox1-1/+1
2018-05-07newapkbuild: create check() functionJakub Jirutka1-0/+30
2018-05-07newapkbuild: change python to python3Jakub Jirutka1-4/+4
2018-04-25abuild: Fix usage info about package commandJonathan Sieber1-1/+1
abuild package misleadingly stated that it will create packages in $REPODIR (suggesting that it actually creates apks).
2018-04-22abuild.in: don't fail if git describe failsSören Tempel1-1/+1
`git describe` by default looks for tags, but `git clone` does not clone tags by default which causes failures on travis currently. Also redirect `git describe` errors to /dev/null while being here.
2018-04-17==== release 3.2.0_rc1 ====v3.2.0_rc1Natanael Copa1-1/+1
2018-04-17abuild: fix unxz with threadingNatanael Copa1-1/+5
busybox unxz does not support --threads/-T option
2018-04-17abuild: simplify optional git usageNatanael Copa1-11/+5
set git=true if git is missing so all git commands are ignored. This simplifies the code a bit
2018-04-15abuild: add multithread decommpressing supportCarlo Landmeter1-3/+5
2018-04-11abuild: allow SPDX license operatorsCarlo Landmeter1-0/+2
valid operators are AND OR WITH
2018-04-11Make file missing in source var explicit.Manuel Tiago Pereira1-1/+1
I've forgot to add a patch file to the source variable in an APKBUILD, altought I did add it to the sums variable. The error message made it seem that I've forgot to add the file to the source directory, which led me to check if my build system was missing the files for some reason. Only after reading the `abuild.in` file did I understood what happened. Hopefully this change makes the message clearer and more helpful.
2018-04-11Fix a few typosJonathan Neuschäfer2-3/+3
2018-04-11abuild: check license for valid SPDX license identifiersCarlo Landmeter1-0/+16
licenses will be checked against the license.lst file provided by the spdx-licenses-list package when installed except when explicitly disabled by the !spdx options flag.
2018-03-20Don't print 'git: not found' errorsOliver Smith1-6/+13
abuild, as packaged in Alpine Linux, does not depend on git. But when you use it without git, it will print out errors like the following: /usr/bin/abuild: line 2554: git: not found With this commit, it saves the git_path in the beginning (just like abuild_path). Later in the code it does not try to run git if that variable is empty. Notably `abuild rootbld` is already checking whether `abuild-rootbld` is installed, and that subpackage of `abuild` does already depend on `git`. So no additional check was added before using `git ` inside `rootbld`. Fixes #32
2018-03-16abuild: Change -f (force) to not ignore checksums/init scriptsOliver Smith1-5/+3
The force flag used to skip the following functions, without any documentation in the help (-h) output: * verify (checksum verification) * initdcheck (check if the init scripts are openrc scripts) * check_arch (check if the target architecture is in "arch=") * check_libc (check if the target libc is masked in the options) This was counter-intuitive and could even be dangerous (when one relies on the checksum verification to prevent man-in-the-middle attacks, but always uses the -f flag). With this commit, it only skips check_arch and check_libc besides the package up to date check and the help output mentions this.
2018-03-11abuild: set arch for -openrc subpackage to noarchSören Tempel1-1/+1
2018-03-11abuild: add postcheck for -openrc subpackageSören Tempel1-0/+10
2018-03-11abuild.in: ensure that $triggers is not in $sourceSören Tempel1-0/+5
Since we already check that $install is not in $source is does make sense to also check that $triggers is not in $source.
2018-03-08rootbld: if networking is enabled, copy resolv.conf into the build rootWilliam Pitcock1-0/+4
2018-02-20abuild: fix typoNatanael Copa1-1/+1
2018-01-02abuild: add sanitycheck of providesNatanael Copa1-0/+12
provides cannot contain the pkgname or apk will be very unhappy.
2017-12-30newapkbuild: fix typoOliver Smith1-1/+1
2017-12-11abuild: add triplet definitions for mips architecturesNils Andreas Svee1-0/+8
2017-11-15rootbld: allow the fake $HOME to be writableWilliam Pitcock1-0/+1
this is needed for running some test runners such as kyua under rootbld.
2017-11-10abuild: rootbld: run testsuites if requested, also handle package() only buildsWilliam Pitcock1-2/+12
2017-11-08abuild: rootbld: fix order of bind-mounts given to bwrapWilliam Pitcock1-1/+1
when building a package with abuildd, a copy of the git checkout is cloned to /tmp, which causes difficulties.
2017-11-02abuild: add support for provider_priorityWilliam Pitcock1-0/+10
provider_priority is a number which determines what priority a package should be given when solving a dependency graph using a provides entry instead of a direct package, in the event of conflicts.
2017-10-28newapkbuild.in: fix package_meson by escaping $pkgdirSören Tempel1-1/+1
2017-10-26abuild: add env option to require testsCarlo Landmeter1-0/+6
This adds an env option REQUIRE_CHECK to require testsuites to be run. This does not clutter getopts so it can be safely removed afterwards when we enforce tests globally. This will allow our CI infrastructure to enforce testsuites where possible.
2017-10-25==== release 3.1.0 ====v3.1.0Natanael Copa1-1/+1
2017-10-24abuild: use provides = cmd:foo instead of 'command:foo'Natanael Copa1-1/+1
it is slightly shorter
2017-10-20abuild: log command: providersWilliam Pitcock1-0/+18
2017-10-19newapkbuild: use make 'package' phase for CMake as wellA. Wilcox1-1/+1
2017-10-19newapkbuild: always set makedepends in newaportSören Tempel1-7/+6
2017-10-19newapkbuild: add command line flag for cmake to getoptsSören Tempel1-1/+1
It is documented in the help output but didn't work because getopts(1) didn't check for that option. I am assuming the person who added cmake support simply forgot to adjust the getopts line.
2017-10-19newapkbuild: add support for mesonSören Tempel1-3/+36
2017-09-28==== release 3.0.2 ====v3.0.2Natanael Copa1-1/+1
2017-09-28abuild: only print version if we are buildingNatanael Copa1-3/+5
The purpose was to show abuild version in the build logs
2017-09-28abuild: fix typoA. Wilcox1-1/+1
2017-09-28newapkbuild: detect CMakeLists.txt file for CMakeA. Wilcox1-1/+1
Some CMake packages do not have cmake/ directory, but all have CMakeLists.txt present in the root directory.
2017-09-27abuild: rootbld: reflect build branch in the builder hostnameTimo Teräs1-9/+7
2017-09-26abuild: do not try to strip standalone elf imagesTimo Teräs1-3/+3
Guile uses ELF is internal object format, and creates them as "no machine" and "standlone" OSABI. Scanelf supports printing OSABI, so use that to filter these out. See: https://github.com/alpinelinux/aports/pull/1714 This also removes unneccessary 'sed' from the pipeline as it's simple to read each field outputted by scanelf.