| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
some newer binutils versions print scary warnings about protected data
because most gcc versions fail to produce the right address
references/relocations for such data that might be subject to copy
relocations. originally vis.h explicitly assigned default visibility
to all public data symbols to avoid this issue, but commit
b8dda24fe1caa901a99580f7a52defb95aedb67c removed this treatment for
stdin/out/err to work around a gcc 3.x bug, and since they don't
actually need it (because taking their addresses is not valid C).
instead, a check for the gcc 3.x bug is added to the configure check
for vis.h preinclude support; this feature will simply be disabled
when using a buggy version of gcc.
|
|
previously, __lookup_ipliteral only checked its argument against the
requested address family, so IPv4 literals passed through to
__lookup_name if the caller asked for only IPv6 results, and likewise
for IPv6 literals when the caller asked for only IPv4. this resulted
in spurious DNS lookups that reportedly even succeeded with some
nameservers.
now, __lookup_ipliteral attempts to parse its argument as both IPv4
and IPv6, and returns an error (to stop further search) rather than 0
(no results yet) if the form of the argument mismatches the requested
address family.
based on patch by Julien Ramseier.
|
|
this case is specified as a mandatory ("shall fail") error.
based on patch by Julien Ramseier.
|
|
per ISO C, CHAR_MAX, not -1, is the value used to indicate that a char
field in struct lconv is unavailable.
patch by Julien Ramseier.
|
|
The value of *size is not relevant in case of failure, but it's
better not to copy garbage from the stack into it.
(The compiler cannot see through the syscall, so optimization
was not affected by the unspecified value).
|
|
The error code of an allocating function was not checked in tre_add_tag.
|
|
the restorer function pointer provided in the kernel sigaction
structure is interpreted by the kernel as a raw code address, not a
function descriptor.
this commit moves the declarations of the __restore and __restore_rt
symbols to ksigaction.h so that arch versions of the file can override
them, and introduces a version for sh which declares them as objects
rather than functions.
an alternate solution would have been defining SA_RESTORER to 0 so
that the functions are not used, but this both requires executable
stack (since the sh kernel does not have a vdso page with permanent
restorer functions) and crashes on qemu user-level emulation.
|
|
lookup the dso an address falls in based on the loadmap and not just a
base/length. fix the main app's fake loadmap used when loaded by a
non-fdpic-aware loader so that it does not cover the whole memory
space.
function descriptor addresses are also matched for future use by
dladdr, but reverse lookups of function descriptors via dladdr have
not been implemented yet. some revisions may be needed in the future
once reclaim_gaps supports fdpic, so that function descriptors
allocated in reclaimed heap space do not get detected as belonging to
the module whose gaps they were allocated in.
|
|
previously these resolved to the code address rather than the address
of the function descriptor.
the conditions for accepting or rejecting symbols are quite
inconsistent between the different points in the dynamic linker code
where such decisions are made. this commit attempts to be at least as
correct as anything already there, but does not improve consistency.
it has been tested to correctly avoid symbols that are merely
references to functions defined in other modules, at least in simple
usage, but at some point all symbol lookup logic should be reviewed
and refactored/unified.
|
|
the entry point code supports being loaded by a loader which is not
fdpic-aware (in practice, either kernel with mmu or qemu without fdpic
support). this mostly just works, but signal handling will wrongly use
a function descriptor address as a code address if the personality is
not adjusted to fdpic.
ideally this code could be placed with sigaction so that it's not
needed except if/when a signal handler is installed. however,
personality is incorrectly maintained per-thread by the kernel, rather
than per-process, so it's necessary to correct the personality before
any threads are started. also, in order to skip the personality
syscall when an fdpic-aware loader is used, we need to be able to
detect how the program was loaded, and this information is only
readily available at the entry point.
|
|
this change is needed to be compatible with fdpic, where some of the
main application's relocations may be performed as part of the crt1
entry point. if we call init functions before passing control, these
relocations will not yet have been performed, and the init code will
potentially make use of invalid pointers.
conceptually, no code provided by the application or third-party
libraries should run before the application entry point. the
difference is not observable to programs using the crt1 we provide,
but it could come into play if custom entry point code is used, so
it's better to be doing this right anyway.
|
|
a mistaken #ifdef instead of #if caused conversion of code addresses
to function descriptors to be performed even on non-fdpic.
|
|
|
|
previously, the normal ELF library loading code was used even for
fdpic, so only the kernel-loaded dynamic linker and main app could
benefit from separate placement of segments and shared text.
|
|
this is always an error and usually results from failure to find/link
the compiler runtime library, but it could also result from
implementation errors in libc, using functions that don't (yet) exist.
either way the resulting libc.so will crash mysteriously at runtime.
the crash happens too early to produce a meaningful error, so these
crashes are very confusing to users and waste a lot of debugging time.
this commit should ensure that they do not happen.
|
|
|
|
the __fdpic_fixup code is not needed for ET_DYN executables, which
instead use reloctions, so we can omit it from the dynamic linker and
static-pie entry point and save some code size.
|
|
the C implementation of __unmapself used for potentially-nommu sh
assumed CRTJMP takes a function descriptor rather than a code address;
however, the actual dynamic linker needs a code address, and so commit
7a9669e977e5f750cf72ccbd2614f8b72ce02c4c changed the definition of the
macro in reloc.h. this commit puts the old macro back in a place where
it only affects __unmapself.
this is an ugly workaround and should be cleaned up at some point, but
at least it's well isolated.
|
|
at this point not all functionality is complete. the dynamic linker
itself, and main app if it is also loaded by the kernel, take
advantage of fdpic and do not need constant displacement between
segments, but additional libraries loaded by the dynamic linker follow
normal ELF semantics for mapping still. this fully works, but does not
admit shared text on nommu.
in terms of actual functional correctness, dlsym's results are
presently incorrect for function symbols, RTLD_NEXT fails to identify
the caller correctly, and dladdr fails almost entirely.
with the dynamic linker entry point working, support for static pie is
automatically included, but linking the main application as ET_DYN
(pie) probably does not make sense for fdpic anyway. ET_EXEC is
equally relocatable but more efficient at representing relocations.
|
|
the fdpic code will need to count symbols, and it may be useful
elsewhere in the future too. counting is trivial as long as sysv hash
is present, but for gnu-hash-only libraries it's complex.
the behavior of the count is changed slightly: we now include symbols
that are not accessible by the gnu hash table in the count. this may
make dladdr slightly slower. if this is a problem, dladdr can subtract
out the part that should not be accessible. unlike in the old code,
subtracting this out is easy even in the fast path where sysv hash is
available too.
|
|
|
|
these were just missed in the previous commits.
|
|
|
|
|
|
these are in do_relocs. the first one was omitted in commit
301335a80b85f12c018e4acf1a2c28615e119f8d because it slightly changes
code (using dso->base rather than cached local var base) and would
have prevented easy verification. the other was an oversight.
|
|
for ordinary ELF with fixed segment displacements, load address
computation is simply adding the base load address. but for FDPIC,
each segment has its own load address, and virtual addresses need to
be adjusted according to the segment they fall in. abstracting this
computation is the first step to making the dynamic linker ready for
FDPIC.
for this first commit, a macro is used rather than a function in order
to facilitate correctness checking. I have verified that the generated
code does not change on my i386 build.
|
|
this new generic version of the stage-2 function lookup should work
for any arch where static data is accessible via got-relative or
pc-relative addressing, using approximately the technique described in
the log message for commit 2907afb8dbd4c1d34825c3c9bd2b41564baca210.
since all the mips-like archs that need got slots fo access static
data have already transitioned to the new stage chaining scheme, the
old dynamic symbol lookup code is now removed.
aarch64, arm, and sh have not yet transitioned; with this commit, they
are now using the new generic code.
|
|
|
|
|
|
|
|
|
|
|
|
previously, the call into stage 2 was made by looking up the symbol
name "__dls2" (which was chosen short to be easy to look up) from the
dynamic symbol table. this was no problem for the dynamic linker,
since it always exports all its symbols. in the case of the static pie
entry point, however, the dynamic symbol table does not contain the
necessary symbol unless -rdynamic/-E was used when linking. this
linking requirement is a major obstacle both to practical use of
static-pie as a nommu binary format (since it greatly enlarges the
file) and to upstream toolchain support for static-pie (adding -E to
default linking specs is not reasonable).
this patch replaces the runtime symbolic lookup with a link-time
lookup via an inline asm fragment, which reloc.h is responsible for
providing. in this initial commit, the asm is provided only for i386,
and the old lookup code is left in place as a fallback for archs that
have not yet transitioned.
modifying crt_arch.h to pass the stage-2 function pointer as an
argument was considered as an alternative, but such an approach would
not be compatible with fdpic, where it's impossible to compute
function pointers without already having performed relocations. it was
also deemed desirable to keep crt_arch.h as simple/minimal as
possible.
in principle, archs with pc-relative or got-relative addressing of
static variables could instead load the stage-2 function pointer from
a static volatile object. that does not work for fdpic, and is not
safe against reordering on mips-like archs that use got slots even for
static functions, but it's a valid on i386 and many others, and could
provide a reasonable default implementation in the future.
|
|
this attribute was applied to pthread_self and the functions providing
the locations for errno and h_errno as an optimization; however, it is
subtly incorrect. as specified, it means the return value will always
be the same, which is not true; it varies per-thread.
this attribute also implies that the function does not depend on any
state, and that calls to it can safely be reordered across any other
code. however such reordering is unsafe for these functions: they
break when reordered before initialization of the thread pointer. such
breakage was actually observed when compiled by libfirm/cparser.
to some extent the reordering problem could be solved with strong
compiler barriers between the stages of early startup code, but the
specified meaning of of attribute((const)) is sufficiently strong that
a compiler would theoretically be justified inserting gratuitous calls
to attribute((const)) const functions at random locations (e.g. to
save the value in static storage for later use).
this reverts commit cbf35978a9870fb1f5c73a852c986d4fcca6c2d4.
|
|
their absence completely breaks format string warnings in programs
with gettext message translations: -Wformat gives no results, and
-Wformat-nonliteral produces spurious warnings.
with gcc, the problem manifests only in standards-conforming profiles;
otherwise gcc sets these attributes by default for the gettext family.
with clang, the problem always manifests; clang has no such defaults.
|
|
|
|
in analogy with commit a627eb35864d5c29a3c3300dfe83745ab1e7a00f
|
|
with this commit it should be possible to produce a working
static-linked fdpic libc and application binaries for sh.
the changes in reloc.h are largely unused at this point since dynamic
linking is not supported, but the CRTJMP macro is used one place
outside of dynamic linking, in __unmapself.
|
|
this version of the entry point is only suitable for static linking in
ET_EXEC form. neither dynamic linking nor pie is supported yet. at
some point in the future the fdpic and non-fdpic versions of this code
may be unified but for now it's easiest to work with them separately.
|
|
this file is intended to be included by crt_arch.h on fdpic-based
targets and needs to be called from the entry point asm.
|
|
clone calls back to a function pointer provided by the caller, which
will actually be a pointer to a function descriptor on fdpic. the
obvious solution is to have a separate version of clone for fdpic, but
I have taken a simpler approach to go around the problem. instead of
calling the pointed-to function from asm, a direct call is made to an
internal C function which then calls the pointed-to function. this
lets the C compiler generate the appropriate calling convention for an
indirect call with no need for ABI-specific assembly.
|
|
for fdpic support is is essential that the got pointer be saved at a
known, ABI-dictated offset from the frame pointer, since there is no
way to recover it once it's lost.
|
|
|
|
|
|
this error was only found by reading the code, but it seems to have
been causing gcc to produce wrong code in malloc: the same register
was used for the output and the high word of the input. in principle
this could have caused an infinite loop searching for an available
bin, but in practice most x86 models seem to implement the "undefined"
result of the bsf instruction as "unchanged".
|
|
originally, the comment in this code was correct and it would likely
work if the compiler generated a tail call to setjmp. however, commit
583e55122e767b1586286a0d9c35e2a4027998ab redesigned sigsetjmp and
siglongjmp such that the old C implementation (which was not intended
to be used) is not even conceptually correct. remove it in the
interest of avoiding confusion when porting to new archs.
|
|
|
|
this restores the original behavior prior to the addition of the
byte-based C locale and fixes what is effectively a regression in
musl's property of always providing working UTF-8 support.
commit 1507ebf837334e9e07cfab1ca1c2e88449069a80 introduced the codeset
name "UTF-8-CODE-UNITS" for the byte-based C locale to represent that
the semantic content is UTF-8 but that it is being processed as code
units (bytes) rather than whole multibyte characters. however, many
programs assume that the codeset name is usable with iconv and/or
comes from a set of standard/widely-used names known to the
application. such programs are likely to produce warnings or errors,
run with reduced functionality, or mangle character data when run
explicitly in the C locale.
the standard places basically no requirements for the string returned
by nl_langinfo(CODESET) and how it interacts with other interfaces, so
returning "UTF-8" is permissible. moreover, it seems like the right
thing to do, since the identity of the character encoding as "UTF-8"
is independent of whether it is being processed as bytes of characters
by the standard library functions.
|
|
this fixes a bug reported by Nuno Gonçalves. previously, calling
fclose on stdin or stdout resulted in deadlock at exit time, since
__stdio_exit attempts to lock these streams to flush/seek them, and
has no easy way of knowing that they were closed.
conceptually, leaving a FILE stream locked on fclose is valid since,
in the abstract machine, it ceases to exist. but to satisfy the
implementation-internal assumption in __stdio_exit that it can access
these streams unconditionally, we need to unlock them.
it's also necessary that fclose leaves permanent streams in a state
where __stdio_exit will not attempt any further operations on them.
fortunately, the call to fflush already yields this property.
|
|
these functions are part of the ARM EABI, meaning compilers may
generate references to them. known versions of gcc do not use them,
but llvm does. they are not provided by libgcc, and the de facto
standard seems to be that libc provides them.
|
