Age | Commit message (Collapse) | Author | Files | Lines |
|
this change adds support for building musl outside of the source
tree. the implementation is similar to autotools where running
configure in a different directory creates config.mak in the current
working directory and symlinks the makefile, which contains the
logic for creating all necessary directories and resolving paths
relative to the source directory.
to support both in-tree and out-of-tree builds with implicit make
rules, all object files are now placed into a separate directory.
|
|
|
|
apparently the .gpword directive does not work reliably with local
text labels; values produced were offset by 64k from the correct
value, resulting in incorrect computation of the got pointer at
runtime. instead, use an external label so that the assembler does not
munge the relocation; the linker will then get it right.
commit 6fef8cafbd0f6f185897bc87feb1ff66e2e204e1 exposed this issue by
removing the old, non-PIE-compatible handwritten crt1.s, which was not
affected. presumably mips PIE executables (using Scrt1.o produced from
crt_arch.h) were already affected at the time.
|
|
at least gcc 4.7 claims c++11 support but does not accept the alignas
keyword, causing breakage when stddef.h is included in c++11 mode.
instead, prefer using __attribute__((__aligned__)) on any compiler
with GNU extensions, and only use the alignas keyword as a fallback
for other C++ compilers.
C code should not be affected by this patch.
|
|
previously, getdelim was allocating twice the space needed every time
it expanded its buffer to implement exponential buffer growth (in
order to avoid quadratic run time). however, this doubling was
performed even when the final buffer length needed was already known,
which is the common case that occurs whenever the delimiter is in the
FILE's buffer.
this patch makes two changes to remedy the situation:
1. over-allocation is no longer performed if the delimiter has already
been found when realloc is needed.
2. growth factor is reduced from 2x to 1.5x to reduce the relative
excess allocation in cases where the delimiter is not initially in the
buffer, including unbuffered streams.
in theory these changes could lead to quadratic time if the same
buffer is reused to process a sequence of lines successively
increasing in length, but once this length exceeds the stdio buffer
size, the delimiter will not be found in the buffer right away and
exponential growth will still kick in.
|
|
getdelim was updating *n, the caller's stored buffer size, before
calling realloc. if getdelim then failed due to realloc failure, the
caller would see in *n a value larger than the actual size of the
allocated block, and use of that value is unsafe. in particular,
passing it again to getdelim is unsafe.
now, temporary storage is used for the desired new size, and *n is not
written until realloc succeeds.
|
|
this error case was overlooked in the old range checking logic. new
check is moved out of __libc_sigaction to the public wrapper in order
to unify the error path and reduce code size.
|
|
commit 8a8fdf6398b85c99dffb237e47fa577e2ddc9e77 was intended to remove
all such usage, but these arch-specific files were overlooked, leading
to inconsistent declarations and definitions.
|
|
POSIX specifies the behaviour for null rootp input, but it
was not implemented correctly.
|
|
changed the insertion method to simplify the recursion logic and
reduce code size a bit.
|
|
malloc failure was not properly propagated in the insertion method
which led to null pointer dereference.
|
|
the tsearch data structure is an avl tree, but it did not implement
the deletion operation correctly so the tree could become unbalanced.
reported by Ed Schouten.
|
|
With point-to-point interfaces, the IFA_ADDRESS netlink attribute
contains the peer address while an extra attribute IFA_LOCAL carries
the actual local interface address.
Both the glibc and uclibc implementations of getifaddrs() handle this
case by moving the ifa_addr contents to the broadcast/remote address
union and overwriting ifa_addr upon receipt of an IFA_LOCAL attribute.
This patch adds the same special treatment logic of IFA_LOCAL to
musl's implementation of getifaddrs() in order to align its behaviour
with that of uclibc and glibc.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
if two or more threads accessed tls in a dso that was loaded after
the threads were created, then __tls_get_new could do out-of-bound
memory access (leading to segfault).
accidentally byte count was used instead of element count when
the new dtv pointer was computed. (dso->new_dtv is (void**).)
it is rare that the same dso provides dtv for several threads,
the crash was not observed in practice, but possible to trigger.
|
|
a conforming compiler for an arch with excess precision floating point
(FLT_EVAL_METHOD!=0; presently i386 is the only such arch supported)
computes all intermediate results in the types float_t and double_t
rather than the nominal type of the expression. some incorrect
compilers, however, only keep excess precision in registers, and
convert down to the nominal type when spilling intermediate results to
memory, yielding unpredictable results that depend on the compiler's
choices of what/when to spill. in particular, this happens on old gcc
versions with -ffloat-store, which we need in order to work around
bugs where the compiler wrongly keeps explicitly-dropped excess
precision.
by explicitly converting to double_t where expressions are expected be
be evaluated in double_t precision, we can avoid depending on the
compiler to get types correct when spilling; the nominal and
intermediate precision now match. this commit should not change the
code generated by correct compilers, or by old ones on non-i386 archs
where double_t is defined as double.
this fixes a serious bug in argument reduction observed on i386 with
gcc 4.2: for values of x outside the unit circle, sin(x) was producing
results outside the interval [-1,1]. changes made in commit
0ce946cf808274c2d6e5419b139e130c8ad4bd30 were likely responsible for
breaking compatibility with this and other old gcc versions.
patch by Szabolcs Nagy.
|
|
commit ad1cd43a86645ba2d4f7c8747240452a349d6bc1 eliminated
preprocessor-level omission of references to the init/fini array
symbols from object files going into libc.so. the references are weak,
and the intent was that the linker would resolve them to zero in
libc.so, but instead it leaves undefined references that could be
satisfied at runtime. normally these references would be harmless,
since the code using them does not even get executed, but some older
binutils versions produce a linking error: when linking a program
against libc.so, ld first tries to use the hidden init/fini array
symbols produced by the linker script to satisfy the references in
libc.so, then produces an error because the definitions are hidden.
ideally ld would have already provided definitions of these symbols
when linking libc.so, but the linker script for -shared omits them.
to avoid this situation, the dynamic linker now provides its own dummy
definitions of the init/fini array symbols for libc.so. since they are
hidden, everything binds at ld time and no references remain in the
dynamic symbol table. with modern binutils and --gc-sections, both
the dummy empty array objects and the code referencing them get
dropped at link time, anyway.
the _init and _fini symbols are also switched back to using weak
definitions rather than weak references since the latter behave
somewhat problematically in general, and the weak definition approach
was known to work well.
|
|
|
|
the nommu kernel shares memory when it can anyway for private
read-only maps, but semantically the map should be private. this can
make a difference when debugging breakpoints are to be used, in which
case the kernel may need to ensure that the mapping is not shared.
the new behavior matches how the kernel FDPIC loader maps the main
program and/or program interpreter (dynamic linker) binary.
|
|
also fix visibility of the glue function used.
|
|
this both allows removal of some of the main remaining uses of the
SHARED macro and clears one obstacle to static-linked dlopen support,
which may be added at some point in the future.
specialized single-TLS-module versions of __copy_tls and __reset_tls
are removed and replaced with code adapted from their dynamic-linked
versions, capable of operating on a whole chain of TLS modules, and
use of the dynamic linker's DSO chain (which contains large struct dso
objects) by these functions is replaced with a new chain of struct
tls_module objects containing only the information needed for
implementing TLS. this may also yield some performance benefit
initializing TLS for a new thread when a large number of modules
without TLS have been loaded, since since there is no need to walk
structures for modules without TLS.
|
|
use weak definitions that the dynamic linker can override instead of
preprocessor conditionals on SHARED so that the same libc start and
exit code can be used for both static and dynamic linking.
|
|
this was only a tiny optimization, and static-linked binaries should
not be calling __tls_get_addr anyway since the linker is supposed to
perform relaxation, resulting in use of the local-exec TLS model.
|
|
this is the first and simplest stage of removal of the SHARED macro,
which will eventually allow libc.a and libc.so to be produced from the
same object files.
the original motivation for these #ifdefs which are now being removed
was to allow building a static-only libc using a compiler that does
not support visibility. however, SHARED was the wrong condition to
test for this anyway; various assembly-language sources refer to
hidden symbols and declare them with the .hidden directive, making it
wrong to define the referenced symbols as non-hidden. if there is a
need in the future to build libc using compilers that lack visibility,
support could be moved to the build system or perhaps the __PIC__
macro could be checked instead of SHARED.
|
|
when adding the fdpic subarchs, the need for these sub files was
overlooked. thus setjmp and longjmp performed illegal instructions.
|
|
on linux/nommu, non-writable private mappings of files may actually
use memory shared with other processes or the fs cache. the old nommu
loader code (used when mmap with MAP_FIXED fails) simply wrote over
top of the original file mapping, possibly clobbering this shared
memory. no such breakage was observed in practice, but it should have
been possible.
the new code starts by mapping anonymous writable memory on archs that
might support nommu, then maps load segments over top of it, falling
back to read if MAP_FIXED fails. we use an anonymous map rather than a
writable file map to avoid reading more data from disk than needed.
since pages cannot be loaded lazily on fault, in case of large
data/bss, mapping the full file may read a lot of data that will
subsequently be thrown away when processing additional LOAD segments.
as a result, we cannot skip the first LOAD segment when operating in
this mode.
these changes affect only non-FDPIC nommu support.
|
|
it was wrongly returning a null pointer instead of an empty string.
|
|
these files are all accepted as legacy arm syntax when producing arm
code, but legacy syntax cannot be used for producing thumb2 with
access to the full ISA. even after switching to UAL, some asm source
files contain instructions which are not valid in thumb mode, so these
will need to be addressed separately.
|
|
the idea of the three-instruction sequence being removed was to be
able to return to thumb code when used on armv4t+ from a thumb caller,
but also to be able to run on armv4 without the bx instruction
available (in which case the low bit of lr would always be 0).
however, without compiler support for generating such a sequence from
C code, which does not exist and which there is unlikely to be
interest in implementing, there is little point in having it in the
asm, and it would likely be easier to add pre-armv4t support via
enhanced linker handling of R_ARM_V4BX than at the compiler level.
removing this code simplifies adding support for building libc in
thumb2-only form (for cortex-m).
|
|
the code to save/restore vfp registers needs to build even when the
configured target does not have fpu; this is because code using vfp
fpu (but with the standard soft-float EABI) may call a libc built for
a soft-float only, and the EABI considers these registers call-saved
when they exist. thus, extra directives are used to force the
assembler to allow vfp instructions and to avoid marking the resulting
object files as requiring vfp.
moving away from using hard-coded opcode words is necessary in order
to eventually support producing thumb2-only output for cortex-m.
conditional execution of these instructions based on hwcap flags was
already implemented. when building for arm (non-thumb) output, the
only currently-supported configuration, this commit does not change
the code emitted.
|
|
|
|
mrc/mcr p10 coprocessor mnemonics are deprecated by some
toolchains.
|
|
contrary to commit 9367fe926196f407705bb07cd29c6e40eb1774dd, all
relevant gas versions actually do support .syntax unified.
|
|
this function is used only as a weak definition for malloc, for static
linking in programs which do not call realloc or free. since it had
external linkage and was thereby exported in libc.so's dynamic symbol
table, --gc-sections was unable to drop it. this was merely an
oversight; there's no reason for it to be external, so make it static.
|
|
this allowing the linker to drop certain weak definitions that are
only used as dummies for static linking. they could be eliminated for
shared library builds using the preprocessor instead, but we are
trying to transition to using the same object files for shared and
static libc, so a link-time solution is preferable.
|
|
based on patch by Denys Vlasenko. sorting sections and common data
symbols by alignment acts as an approximation for optimal packing,
which the linker does not actually support.
|
|
based on patch by Denys Vlasenko. the original intent for using these
options was to enable linking optimizations. these are immediately
available for static linking applications to libc.a, and will also be
used for linking libc.so in a subsequent commit.
in addition to the original motives, this change works around a whole
class of toolchain bugs where the compiler generates relative address
expressions using a weak symbol and the assembler "optimizes out" the
relocation which should result by using the weak definition. (see gas
pr 18561 and gcc pr 66609, 68178, etc. for examples.) by having
different functions and data objects in their own sections, all
relative address expressions are cross-section and thus cannot be
resolved to constants until link time. this allows us to retain
support for affected compiler/assembler versions without invasive
and fragile source-level workarounds.
|
|
this conditional path was never tested because there are no compilers
that conform to annex g (none with _Imaginary_I).
|
|
this assumption is borderline-unsafe to begin with, and fails badly
with -ffunction-sections since the linker can move the callee
arbitrarily far away when it lies in a different section.
|
|
this way, overriding these variables on the make command line (or just
re-passing the originally-passed values when invoking make) won't
suppress use of the flags added by configure.
|
|
since mremap with the MREMAP_FIXED flag is an operation that unmaps
existing mappings, it needs to use the vm lock mechanism to ensure
that any in-progress synchronization operations using vm identities
from before the call have finished.
also, the variadic argument was erroneously being read even if the
MREMAP_FIXED flag was not passed. in practice this didn't break
anything, but it's UB and in theory LTO could turn it into a hard
error.
|
|
It's quite feasible for this to happen via MREMAP_MAYMOVE.
|
|
previously, only archs that needed to do stack cleanup defined a
__cp_cancel label for acting on cancellation in their syscall asm, and
a default definition was provided by a weak alias to __cancel, the C
function. this resulted in wrong codegen for arm on gcc versions
affected by pr 68178 and possibly similar issues (like pr 66609) on
other archs, and also created an inconsistency where the __cp_begin
and __cp_end labels were treated as const data but __cp_cancel was
treated as a function. this in turn caused incorrect code generation
on archs where function pointers point to function descriptors rather
than code (for now, only sh/fdpic).
|
|
using the actual mcontext_t definition rather than an overlaid pointer
array both improves correctness/readability and eliminates some ugly
hacks for archs with 64-bit registers bit 32-bit program counter.
also fix UB due to comparison of pointers not in a common array
object.
|
|
when a library being loaded has bss (i.e. data segment with
p_memsz>p_filesz), this region needs to be zeroed with a combination
of memset and/or mmap. the regular ELF loader always did this but the
FDPIC code path omitted it, leading to objects in bss having
uninitialized/junk contents.
|
|
getnameinfo() compares the size of the given struct sockaddr with
sizeof(struct sockaddr_in) and sizeof(struct sockaddr_in6) depending on
the net family. When you add a sockaddr of size sizeof(struct
sockaddr_storage) this function will fail because the size of the
sockaddr is too big. Change the check that it only fails if the size is
too small, but make it work when it is too big for example when someone
calls this function with a struct sockaddr_storage and its size.
This fixes a problem with IoTivity 1.0.0 and musl.
glibc and bionic are only failing if it is smaller, net/freebsd
implemented the != check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
previously, transient failures like fd exhaustion or other
resource-related errors were treated the same as non-existence of
these files, leading to fallbacks or false-negative results. in
particular:
- failure to open hosts resulted in fallback to dns, possibly yielding
EAI_NONAME for a hostname that should be defined locally, or an
unwanted result from dns that the hosts file was intended to
replace.
- failure to open services resulted in EAI_SERVICE.
- failure to open resolv.conf resulted in querying localhost rather
than the configured nameservers.
now, only permanent errors trigger the fallback behaviors above; all
other errors are reportable to the caller as EAI_SYSTEM.
|
|
the buffer enlargement logic here accounted for the terminating null
byte, but not for the possibility of hitting the delimiter in the
buffer-refill code path that uses getc_unlocked, in which case two
additional bytes (the delimiter and the null termination) are written
without another chance to enlarge the buffer.
this patch and the corresponding bug report are by Felix Janda.
|
|
the option to suppress executable stack tagging was placed in CFLAGS,
which is treated as optional and overridable by the build system. if a
user replaces CFLAGS after configure has run, it could get lost,
resulting in a libc.so that's flagged as needing executable stack,
which would cause the kernel to map the initial stack as executable.
move -Wa,--noexecstack to CFLAGS_C99FSE, the make variable used for
mandatory compiler options.
|
|
these per-target CFLAGS adjustments are mandatory additions to the
command line for building the affected targets, not part of the
user-provided CFLAGS for tuning. my intent was always that the
variable append operations would take place after user settings, but
when a variable is set on the command line, it overrides all
definitions in the makefile, including target-specific ones.
based on patch by Szabolcs Nagy.
|
|
|