| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
this is analogous to commit 40aa18d55ab763e69ad16d0cf1cebea708ffde47.
so far, there are not any actual time64 versions of the rusage
syscalls (getrusage and wait4) and might never be. however, the
existing x32 ones behave the way time64 versions would if they
existed: using 64-bit slots in place of all longs.
presently, wait4 and getrusage are broken on x32, storing the timevals
correctly but messing up everything else due to the long/kernel-long
mismatch. this would be a huge buffer overflow if not for the 16
reserved slots we left long ago, which suffice to prevent 14
double-sized longs from overflowing into unrelated memory. this commit
will make it possible to fix them.
|
|
this is to match the kernel and glibc interfaces. here, struct pt_regs
is an incomplete type, but that's harmless, and if it's completed by
inclusion of another header then members of the struct pointed to by
the regs member can be accessed directly without going through a cast
or intermediate pointer object.
|
|
the userspace ucontext API has this as an array rather than a
structure.
commit 3c59a868956636bc8adafb1b168d090897692532 fixed the
corresponding mistake for vrregset_t, namely that the original
powerpc64 port used a mix of types from 32-bit powerpc and powerpc64
rather than matching the 64-bit types.
|
|
aside from the special value EOF, ungetc is specified to accept and
convert values outside the range of unsigned char. conversion takes
place automatically as part of assignment when storing into the
buffer, but the return value is also required to be the resulting
converted value, and this requirement was not satisfied.
simplified from patch by Wang Jianjian.
|
|
based on patch by Dan Gohman, who caught this via compiler warnings.
analysis by Szabolcs Nagy determined that it's a bug, whereby errno
can be set incorrectly for values where the coercion from long double
to double causes rounding. it seems likely that floating point status
flags may be set incorrectly as a result too.
at the same time, clean up use of preprocessor concatenation involving
LDBL_MANT_DIG, which spuriously depends on it being a single unadorned
decimal integer literal, and instead use the equivalent formulation
2/LDBL_EPSILON. an equivalent change on the printf side was made in
commit bff6095d915f3e41206e47ea2a570ecb937ef926.
|
|
policy has long been that these definitions are purely a function of
whether long/pointer is 32- or 64-bit, and that they are not allowed
to vary per-arch. move the definition to the shared alltypes.h.in
fragment, using integer constant expressions in terms of sizeof to
vary the array dimensions appropriately. I'm not sure whether this is
more or less ugly than using preprocessor conditionals and two sets of
definitions here, but either way is a lot less ugly than repeating the
same thing for every arch.
|
|
LLONG_MAX is uniform for all archs we support and plenty of header and
code level logic assumes it is, so it does not make sense for limits.h
bits mechanism to pretend it's variable.
LONG_BIT can be defined in terms of LONG_MAX; there's no reason to put
it in bits.
by moving LONG_MAX definition to __LONG_MAX in alltypes.h and moving
LLONG_MAX out of bits, there are now no plain-C limits that are
defined in the bits header, so the bits header only needs to be
included in the POSIX or extended profiles. this allows the feature
test macro logic to be removed from the bits header, facilitating a
long-term goal of getting such logic out of bits.
having __LONG_MAX in alltypes.h will allow further generalization of
headers.
archs without a constant PAGESIZE no longer need bits/limits.h at all.
|
|
the resolution of Austin Group issue #162 adds endian.h as a standard
header for future versions of the standard, making it no longer
acceptable for some of the functionality to be hidden behind
_BSD_SOURCE or _GNU_SOURCE. the definitions of the [lb]etoh{16,32,64}
function-like macros are kept conditional since they are alternate
names which the standard did not adopt.
|
|
building on commit 97d35a552ec5b6ddf7923dd2f9a8eb973526acea,
__BYTE_ORDER is now available wherever alltypes.h is included. since
reloc.h is only used from src/internal/dynlink.h, it can be assumed
that __BYTE_ORDER is exposed. reloc.h is not permitted to be included
in other contexts, and generally, like most arch headers, lacks
inclusion guards that would allow such usage. the mips64 version
mistakenly included such guards; they are removed for consistency.
|
|
building on commit 97d35a552ec5b6ddf7923dd2f9a8eb973526acea,
__BYTE_ORDER is now available wherever alltypes.h is included.
endian.h should not be used since, in the future, it will expose
identifiers that are not in the reserved namespace for the headers
which were previously using it.
|
|
this change is motivated by the intersection of several factors.
presently, despite being a nonstandard header, endian.h is exposing
the unprefixed byte order macros and functions only if _BSD_SOURCE or
_GNU_SOURCE is defined. this is to accommodate use of endian.h from
other headers, including bits headers, which need to define structure
layout in terms of endianness. with time64 switch-over, even more
headers will need to do this.
at the same time, the resolution of Austin Group issue 162 makes
endian.h a standard header for POSIX-future, requiring that it expose
the unprefixed macros and the functions even in standards-conforming
profiles. changes to meet this new requirement would break existing
internal usage of endian.h by causing it to violate namespace where
it's used.
instead, have the arch's alltypes.h define __BYTE_ORDER, either as a
fixed constant or depending on the right arch-specific predefined
macros for determining endianness. explicit literals 1234 and 4321 are
used instead of __LITTLE_ENDIAN and __BIG_ENDIAN so that there's no
danger of getting the wrong result if a macro is undefined and
implicitly evaluates to 0 at the preprocessor level.
the powerpc (32-bit) bits/endian.h being removed had logic for varying
endianness, but our powerpc arch has never supported that and has
always been big-endian-only. this logic is not carried over to the new
__BYTE_ORDER definition in alltypes.h.
|
|
now that commit f7f1079796abc6f97c69521d2334e9c7d3945dd8 removed the
legacy i386 conditional definition, va_list is in no way
arch-specific, and has no reason to be in the future. move it to the
shared part of alltypes.h.in
|
|
commit ffaaa6d230512f3a7f3d040b943517728f3dc3cf removed the
corresponding stdarg.h support for compilers without va_list builtins,
but failed to remove the alternate type definition, leaving incorrect
va_list definitions in place with compilers that don't define __GNUC__
with a value >= 3.
|
|
SQRT.fmt exists on MIPS II+ (float), MIPS III+ (double).
ABS.fmt exists on MIPS I+ but only cores with ABS2008 flag in FCSR
implement the required behaviour.
|
|
|
|
|
|
Both sqrt and sqrtf shifted the signed exponent as signed int to adjust
the bit representation of the result. There are signed right shifts too
in the code but those are implementation defined and are expected to
compile to arithmetic shift on supported compilers and targets.
|
|
mbsrtowcs contains "vectorized" loops to quickly step over bytes
without the high bit set; these have undefined behavior by virtue of
aliasing uint32_t over top of char data for the accesses.
commit 4d0a82170a25464c39522d7190b9fe302045ddb2 fixed the
corresponding usage in string functions by using the may_alias
attribute conditional on __GNUC__ and disabled the vectorized code in
its absence. do the same for mbsrtowcs.
|
|
Several math functions are now from the ARM optimized-routines repo
licensed under standard MIT terms and copyrighted by Arm Limited,
so mention this in the COPYRIGHT too.
|
|
commit ab3eb89a8b83353cdaab12ed017a67a7730f90e9 removed it as part of
correcting the mcontext_t definition, but there is still code using
struct sigcontext and expecting the member names present in it, most
notably libgcc_eh. almost all such usage is incorrect, but bring back
struct sigcontext at least for now so as not to introduce regressions.
|
|
in order for sys/procfs.h (provided by sys/user.h) to be useful, it
needs to match the API its consumers (gdb, etc.) expect, including the
member names established by glibc.
this partly reverts commit 29e8737f81ccc9fbadcf61a75318aa3d0516aafa,
which partly reverted d493206de7df4db07ad34f24701539ba0a6ed38c,
eliminating struct user_fpregs_struct which seems to have had no
precedent and using union __riscv_mc_fp_state for elf_fpregset_t. this
requires indirect inclusion of signal.h to make union
__riscv_mc_fp_state visible, but being that these are nonstandard
"junk" headers with no official restrictions on what they can pull in,
that's no big deal.
split off and expanded from patch by Khem Raj.
|
|
the top-level mcontext_t member names were namespace-violating in
standards profiles before, and nested-level member names (some of them
single-letter) were egregiously bad namespace impositions even in
non-strict profiles. moreover, they mismatched those used in the
public API first defined in glibc, breaking any code making use of
them.
unlike most archs, the public API used in glibc for riscv mcontext_t
members was designed to be namespace-safe, so we can and should expose
the members regardless of feature test macros. only the typedefs for
greg_t, gregset_t, and fpregset_t need to be protected behind FTMs.
the struct tags for mcontext_t and ucontext_t are also changed. for
mcontext_t this is necessary to make the common definition across
profiles namespace-safe. for ucontext_t, it's just a matter of
matching the tag from the glibc-defined API.
these changes are split off and expanded from a patch by Khem Raj.
|
|
Some declarations of __tls_get_new were left in the code, even
though the definition got removed in
commit 9d44b6460ab603487dab4d916342d9ba4467e6b9
install dynamic tls synchronously at dlopen, streamline access
this can make the build fail with
ld: lib/libc.so: hidden symbol `__tls_get_new' isn't defined
when libc.so is linked without --gc-sections, because a .hidden
declaration in asm code creates a reference even if the symbol
is not actually used.
|
|
lrint in (LONG_MAX, 1/DBL_EPSILON) and in (-1/DBL_EPSILON, LONG_MIN)
is not trivial: rounding to int may be inexact, but the conversion to
int may overflow and then the inexact flag must not be raised. (the
overflow threshold is rounding mode dependent).
this matters on 32bit targets (without single instruction lrint or
rint), so the common case (when there is no overflow) is optimized by
inlining the lrint logic, otherwise the old code is kept as a fallback.
on my laptop an i486 lrint call is asm:10ns, old c:30ns, new c:21ns
on a smaller arm core: old c:71ns, new c:34ns
on a bigger arm core: old c:27ns, new c:19ns
|
|
analogous to commit ddc7c4f936c7a90781072f10dbaa122007e939d0 for
mips64 and n32, remove the hack to load the syscall number into $2 via
asm, and use a constraint to let the compiler load it instead.
now, only $4, $5, and $6 are potential input-only registers. $2 is
always input and output, and $7 is both when it's an argument,
otherwise output-only. previously, $7 was treated as an input (with a
"1" constraint matching its output position) even when it was not an
input, which was arguably undefined behavior (asm input from
indeterminate value). this is corrected.
as before, $8, $9, and $10 are conditionally input-output registers
for 5-, 6-, and 7-argument syscalls. their role in input is carrying
in the values that will be stored on the stack for arguments 5-7.
their role in output is carrying back whatever the kernel has
clobbered them with, so that the compiler cannot assume they still
contain the input values.
|
|
|
|
mips32 has two fpu register file variants: FR=0 with 32 32-bit
registers, where pairs of neighboring even/odd registers are used to
represent doubles, and FR=1 with 32 64-bit registers, each of which
can store a single or double.
up through r5 (our "mips" arch), the supported ABI uses FR=0, but
modern compilers generate "fpxx" model code that can safely operate
with either model. r6, which is an incompatible but similar ISA, drops
FR=0 and only provides the FR=1 model. as such, setjmp and longjmp,
which depended on being able to save and restore call-saved doubles by
storing and loading their 32-bit halves, were completely broken in the
presence of floating point code on mips r6.
to fix this, use the s.d and l.d mnemonics to store and load fpu
registers. these expand to the existing swc1 and lwc1 instructions for
pairs of 32-bit fpu registers on mips1, but on mips2 and later they
translate directly to the 64-bit sdc1 and ldc1.
with FR=0, sdc1 and ldc1 behave just like the pairs of swc1 and lwc1
instructions they replace, storing or loading the even/odd pair of fpu
registers that can be treated as separate single-precision floats or
as a unit representing a double. but with FR=1, they store/load
individual 64-bit registers. this yields the ABI-correct behavior on
mips r6, and should make linking of pre-r6 (plain "mips") code with
"fp64" model code workable, although this is and will likely remain
unsupported usage.
in addition to the mips r6 problem this change fixes, reportedly
clang's internal assembler refuses to assemble swc1 and lwc1
instructions for odd register indices when building for "fpxx" model
(the default). this caused setjmp and longjmp not to build. by using
the s.d and l.d forms, this problem is avoided too.
as a bonus, code size is reduced everywhere but mips1.
|
|
mips r6 (an incompatible isa from traditional mips) removes the hi and
lo registers used for mul/div results. older gcc versions accepted
them in the clobber list for asm, but their presence is incorrect and
breaks on later versions.
in the process of fixing this, the clobber list for 32-bit mips
syscalls has been deduplicated via a macro like on mips64 and n32.
|
|
armv8 removed the coprocessor instructions other than cp14, so
on an armv8 system the related hwcaps should never be set.
new llvm complains about the use of coprocessor instructions in
armv8-a mode (even though they are never executed at runtime),
so ifdef them out when musl is built for armv8.
|
|
in the timer thread start function, self->timer_id was accessed
without synchronization; the timer thread could fail to see the store
from the calling thread, resulting in timer_delete failing to delete
the correct kernel-level timer.
this fix is based on a patch by changdiankang, but with the load moved
to after receiving the timer_delete signal rather than just after the
start barrier, so as not to retain the possibility of data race with
timer_delete.
|
|
The operand sepcifiers in a_cas and a_cas_p for riscv64 were incorrect:
there's a backwards branch in the routine, so despite tmp being written
at the end of the assembly fragment it cannot be allocated in one of the
input registers because the input values may be needed for another trip
around the loop.
For code that follows the guaranteed forward progress requirements, the
backwards branch is rarely taken: SiFive's hardware only fails a store
conditional on execptional cases (ie, instruction cache misses inside
the loop), and until recently a bug in QEMU allowed back-to-back
store conditionals to succeed. The bug has been fixed in the latest
QEMU release, but it turns out that the fix caused this latent bug in
musl to manifest.
|
|
commit 8a544ee3a2a75af278145b09531177cab4939b41 introduced a
dependency of the failure path for explicit scheduling at thread
creation on __clone's handling of the start function returning, which
should result in SYS_exit.
as noted in commit 05870abeaac0588fb9115cfd11f96880a0af2108, the arm
version of __clone was broken in this case. in the past, the mips
version was also broken; it was fixed in commit
8b2b61e0001281be0dcd3dedc899bf187172fecb.
since this code path is pretty much entirely untested (previously only
reachable in applications that call the public clone() and return from
the start function) and consists of fragile per-arch asm, don't assume
it works, at least not until it's been thoroughly tested. instead make
the SYS_exit syscall from the start function's failure path.
|
|
commit cc3a4466605fe8dfc31f3b75779110ac93055bc1 fixed this for printf
but neglected to fix wprintf.
Previously, %lf caused a failure to output.
|
|
we don't actually support building asm source files as thumb1, but
it's possible that the condition __ARM_ARCH>=5 would be false on old
compilers that did not define __ARM_ARCH at all. avoiding that would
require enumerating all of the possible __ARM_ARCH_*__ macros for
testing.
as noted in commit 05870abeaac0588fb9115cfd11f96880a0af2108, mov lr,pc
is not valid for saving a return address when in thumb mode. since
this code is a hot path (dynamic TLS access), don't do the out-of-line
bl->bx chaining to save the return value; instead, use the fact that
this file is preprocessed asm to add the missing thumb bit with an add
in place of the mov.
the change here does not affect builds for ISA levels new enough to
have a thread pointer read instruction, or for armv5 and later as long
as the compiler properly defines __ARM_ARCH, or for any build as arm
(not thumb) code. it's likely that it makes no difference whatsoever
to any present-day practical build environments, but nonetheless now
it's safe.
as an alternative, we could just assume __thumb__ implies availability
of blx since we don't support building asm source files as thumb1. I
didn't do that in order to avoid having a wrong assumption here if
that ever changes.
|
|
as noted in commit 05870abeaac0588fb9115cfd11f96880a0af2108, mov lr,pc
is not a valid method for saving the return address in code that might
be built as thumb.
this one is unlikely to matter, since any ISA level that has thumb2
should also have native implementations of atomics that don't involve
kuser_helper, and the affected code is only used on very old kernels
to begin with.
|
|
mov lr,pc is not a valid way to save the return address in thumb mode
since it omits the thumb bit. use a chain of bl and bx to emulate blx.
this could be avoided by converting to a .S file with preprocessor
conditions to use blx if available, but the time cost here is
dominated by the syscall anyway.
while making this change, also remove the remnants of support for
pre-bx ISA levels. commit 9f290a49bf9ee247d540d3c83875288a7991699c
removed the hack from the parent code paths, but left the unnecessary
code in the child. keeping it would require rewriting two code paths
rather than one, and is useless for reasons described in that commit.
|
|
AT_HWCAP2 flags, see
linux commit 671db581815faf17cbedd7fcbc48823a247d90b1
arm64: Expose DC CVADP to userspace
linux commit 06a916feca2b262ab0c1a2aeb68882f4b1108a07
arm64: Expose SVE2 features for userspace
|
|
new mount api syscalls were added, same numers on all targets, see
linux commit a07b20004793d8926f78d63eb5980559f7813404
vfs: syscall: Add open_tree(2) to reference or clone a mount
linux commit 2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae
vfs: syscall: Add move_mount(2) to move mounts around
linux commit 24dcb3d90a1f67fe08c68a004af37df059d74005
vfs: syscall: Add fsopen() to prepare for superblock creation
linux commit ecdab150fddb42fe6a739335257949220033b782
vfs: syscall: Add fsconfig() for configuring and managing a context
linux commit 93766fbd2696c2c4453dd8e1070977e9cd4e6b6d
vfs: syscall: Add fsmount() to create a mount for a superblock
linux commit cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb
vfs: syscall: Add fspick() to select a superblock for reconfiguration
linux commit 9c8ad7a2ff0bfe58f019ec0abc1fb965114dde7d
uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2]
linux commit d8076bdb56af5e5918376cd1573a6b0007fc1a89
uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]
|
|
apply open_tree with OPEN_TREE_CLONE call to the entire subtree, see
linux commit a07b20004793d8926f78d63eb5980559f7813404
vfs: syscall: Add open_tree(2) to reference or clone a mount
|
|
see
linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f
statx: Add a system call to make enhanced file info available
these are linux specific and not reserved names for fcntl.h so they
are under _BSD_SOURCE|_GNU_SOURCE.
|
|
when set a pidfd is stored in parent_tidptr, see
linux commit b3e5838252665ee4cfa76b82bdf1198dca81e5be
clone: add CLONE_PIDFD
|
|
ethertype for fake VLAN header for DSA, see
linux commit bf5bc3ce8a8f32a0d45b6820ede8f9fc3e9c23df
ether: Add dedicated Ethertype for pseudo-802.1Q DSA tagging
|
|
historically, a number of 32-bit archs used long rather than int for
wchar_t, for no good reason. GCC still uses the historical types, but
clang replaced them all with int, and it seems PCC uses int too.
mismatching the compiler's type for wchar_t is not an option due to
wide string literals.
note that the mismatch does not affect C++ ABI since wchar_t is its
own builtin type/keyword in C++, distinct from both int and long, not
a typedef.
i386 already worked around this by honoring __WCHAR_TYPE__ if defined
by the compiler, and only using the official legacy ABI type if not.
add the same to the other affected archs.
it might make sense at some point to switch to using int as the
default if __WCHAR_TYPE__ is not defined, if the expectations is that
new compilers will treat int as the correct choice, but it's unlikely
that the case where __WCHAR_TYPE__ is undefined will ever be used
anyway. I actually wanted to move the definition of wchar_t to the
top-level shared alltypes.h.in, using __WCHAR_TYPE__ and falling back
to int if not defined, but that can't be done without assuming all
compilers define __WCHAR_TYPE__ thanks to some pathological archs
where the ABI has wchar_t as an unsigned type.
|
|
previously, when pthread_create failed due to inability to set
explicit scheduling according to the requested attributes, the nascent
thread was detached and made responsible for its own cleanup via the
standard pthread_exit code path. this left it consuming resources
potentially well after pthread_create returned, in a way that the
application could not see or mitigate, and unnecessarily exposed its
existence to the rest of the implementation via the global thread
list.
instead, attempt explicit scheduling early and reuse the failure path
for __clone failure if it fails. the nascent thread's exit futex is
not needed for unlocking the thread list, since the thread calling
pthread_create holds the thread list lock the whole time, so it can be
repurposed to ensure the thread has finished exiting. no pthread_exit
is needed, and freeing the stack, if needed, can happen just as it
would if __clone failed.
|
|
if setting scheduling properties succeeds, the new thread may end up
with lower priority than the caller, and may be unable to continue
running due to another intermediate-priority thread. this produces a
priority inversion situation for the thread calling pthread_create,
since it cannot return until the new thread reports success.
originally, the parent was responsible for setting the new thread's
priority; commits b8742f32602add243ee2ce74d804015463726899 and
40bae2d32fd6f3ffea437fa745ad38a1fe77b27e changed it as part of
trimming down the pthread structure. since then, commit
04335d9260c076cf4d9264bd93dd3b06c237a639 partly reversed the changes,
but did not switch responsibilities back. do that now.
|
|
commit 8f11e6127fe93093f81a52b15bb1537edc3fc8af wrongly documented
that all changes to libc.threads_minus_1 were guarded by the thread
list lock, but the decrement for failed SYS_clone took place after the
thread list lock was released.
|
|
commit 030e52639248ac8417a4934298caa78c21a228d1 added optreset, a BSD
extension to getopt duplicating the functionality (also an extension)
of setting optind to 0, but failed to provide a public declaration for
it. according to the BSD documentation and headers, the application is
not supposed to need to provide its own declaration.
|
|
these are presently extensions, thus named with _np to match glibc and
other implementations that provide them; however they are likely to be
standardized in the future without the _np suffix as a result of
Austin Group issue 1208. if so, both names will be kept as aliases.
|
|
|
|
due to historical accident/sloppiness in glibc, the powerpc,
powerpc64, and sh versions of struct user, defined by sys/user.h, used
struct pt_regs from the kernel asm/ptrace.h for their regs member.
this made it impossible to define the type in an API-compatible manner
without either including asm/ptrace.h like glibc does (contrary to our
policy of not depending on kernel headers), or clashing with
asm/ptrace.h's definition of struct pt_regs if both headers are
included (which is almost always the case in software using
sys/user.h).
for a long time I viewed this problem as having no reasonable fix. I
even explored the possibility of having the powerpc[64] and sh
versions of user.h just include the kernel header (breaking with
policy), but that looked like it might introduce new clashes with
sys/ptrace.h. and it would also bring in a lot of additional cruft
that makes no sense for sys/user.h to expose. glibc goes out of its
way to suppress some of that with #undef, possibly leading to
different problems. this is a rabbit-hole that should be explored no
further.
as it turns out, however, nothing actually uses struct user
sufficiently to care about the type of the regs member; most software
including sys/user.h does not even use struct user at all. so, the
problem can be fixed just by doing away with the insistence on strict
glibc API compatibility for the struct tag of the regs member.
rather than renaming the tag, which might lead to the new name
entering use as API, simply use an untagged structure inside struct
user with the same members/layout as struct pt_regs.
for sh, struct pt_dspregs is just removed entirely since it was not
used.
|
