Age | Commit message (Collapse) | Author | Files | Lines |
|
reject elf files which are not ET_EXEC/ET_DYN type as bad exec format,
and reject ET_EXEC files when they cannot be loaded at the correct
address, since they are not relocatable at runtime. the main practical
benefit of this is to make dlopen of the main program fail rather than
producing an unsafe-to-use handle.
|
|
|
|
it's not clear to me why the linker even outputs these headers if they
are null, but apparently it does so. with the default startfiles, they
will never be null anyway, but this patch allows eliminating crti,
crtn, crtbegin, and crtend (leaving only crt1) if the toolchain is
using init_array/fini_array (or for a C-only, no-ctor environment).
|
|
|
|
|
|
in signal() it is needed since __sigaction uses restrict in parameters
and sharing the buffer is technically an aliasing error. do the same
for the syscall, as at least qemu-user does not handle it properly.
|
|
|
|
|
|
LC_GLOBAL_LOCALE refers to the global locale, controlled by setlocale,
not the thread-local locale in effect which these functions should be
using. neither LC_GLOBAL_LOCALE nor 0 has an argument to the *_l
functions has behavior defined by the standard, but 0 is a more
logical choice for requesting the callee to lookup the current locale.
in the future I may move the current locale lookup the the caller (the
non-_l-suffixed wrapper).
at this point, all of the locale logic is dummied out, so no harm was
done, but it should at least avoid misleading usage.
|
|
|
|
this change is in preparation for possibly adding support for the
field width and padding specifiers added in POSIX 2008.
|
|
also add a warning to the existing sys/poll.h. the warning is absent
from sys/dir.h because it is actually providing a slightly different
API to the program, and thus just replacing the #include directive is
not a valid fix to programs using this one.
|
|
|
|
|
|
|
|
these odd names are actually generated by mess in glibc's stdlib.h, so
any glibc-linked program using strtol needs them to run against musl.
|
|
|
|
entry point was wrong for PIE. e_entry was being treated as an
absolute value, whereas it's actually relative to the load address
(which is zero for non-PIE).
phdr pointer was wrong for non-PIE. e_phoff was being treated as
load-address-relative, whereas it's actually a file offset in the ELF
file. in any case, map_library was already computing it correctly, and
the incorrect code in __dynlink was overwriting it with junk.
|
|
|
|
the only immediate effect of this commit is enabling PIE support on
some archs that did not previously have any Scrt1.s, since the
existing asm files for crt1 override this C code. so some of the
crt_arch.h files committed are only there for the sake of documenting
what their archs "would do" if they used the new C-based crt1.
the expectation is that new archs should use this new system rather
than using heavy asm for crt1. aside from being easier and less
error-prone, it also ensures that PIE support is available immediately
(since Scrt1.o is generated from the same C source, using -fPIC)
rather than having to be added as an afterthought in the porting
process.
|
|
source and dest arguments for strcpy cannot overlap, so memmove must
be used here. the length is already known from the above loop.
|
|
based on a patch by orc. POSIX actually fails to specify the format of
the ntop conversion; presumably, any output that will correctly
round-trip back via the (well-specified) pton operation is acceptable.
the new behavior is much more convenient than the old, however.
this patch also affects getnameinfo, which is implemented in terms of
inet_ntop and which is the preferred interface for performing this
conversion.
I've also removed some inexplicable cruft (filling the buffer with 'x'
before doing anything) whose origin I was unable to track down.
|
|
it's not clear that -O3 helps them, and gcc seems to have floating
point optimization bugs that introduce additional failures when -O3 is
used on some of these files.
|
|
apparently the original kernel commit's i386 version of siginfo.h
defined this field as unsigned int, but the asm-generic file always
had void *. unsigned int is obviously not a suitable type for an
address, in a non-arch-specific file, and glibc also has void * here,
so I think void * is the right type for it.
also fix redundant type specifiers.
|
|
linux commit 8d36eb01da5d371feffa280e501377b5c450f5a5 (2013-05-29)
added PF_IB for InfiniBand
linux commit d021c344051af91f42c5ba9fdedc176740cbd238 (2013-02-06)
added PF_VSOCK for VMware sockets
|
|
linux commit a0727e8ce513fe6890416da960181ceb10fbfae6 (2012-04-12)
added siginfo fields for SIGSYS (seccomp uses it)
linux commit ad5fa913991e9e0f122b021e882b0d50051fbdbc (2009-09-16)
added siginfo field and si_code values for SIGBUS (hwpoison signal)
|
|
|
|
|
|
|
|
added in linux-v3.10 commit 84c751bd4aebbaae995fe32279d3dba48327bad4
using stdint.h types for the new ptrace_peeksiginfo_args struct
|
|
see linux commits 4f99ad51292078cc47343c17d3870764588cff73 and
e5c5d22e8dcf7c2d430336cbf8e180bd38e8daf1
|
|
added in linux-v3.10 commit 1ff3c9677bff7e468e0c487d0ffefe4e901d33f4
|
|
removed in linux-v3.10 in commit 1a2c6181c4a1922021b4d7df373bba612c3e5f04
|
|
introduced in linux-v3.10 commit 7d4c04fc170087119727119074e72445f2bb192b
|
|
|
|
this is a cheat since the _l versions take an extra argument, but
since these functions are only here for ABI purposes, it doesn't
really matter as long as the ABI matches. if the non-__-prefixed
versions are eventually made public, they should proabably be real
functions rather than hacks like this.
|
|
unlike the strftime commit, this one is purely an ABI compatibility
issue. the previous version of the code would have worked just as well
with LC_TIME once LC_TIME support is added.
|
|
the latter is both for ABI purposes, and to facilitate eventually
adding LC_TIME support. it's also nice to eliminate an extra source
file.
|
|
based on a patch by orc, with indexing and flow control cleaned up a
little bit. this code is all going to be replaced at some point in the
near future.
|
|
these are needed for some C++ library binaries including most builds
of libstdc++. I'm not entirely clear on the rationale. this patch does
not implement any special semantics for them, but as far as I can
tell, no special treatment is needed in correctly-linked programs;
this binding seems to exist only for catching incorrectly-linked
programs.
|
|
this more than compensates for the size increase of jmp_buf, and
greatly reduces bss/data size on archs with huge jmp_buf.
|
|
this is necessary to meet the C++ ABI target. alternatives were
considered to avoid the size increase for non-sig jmp_buf objects, but
they seemed to have worse properties. moreover, the relative size
increase is only extreme on x86[_64]; one way of interpreting this is
that, if the size increase from this patch makes jmp_buf use too much
memory, then the program was already using too much memory when built
for non-x86 archs.
|
|
the case where mem was already aligned is handled earlier in the
function now.
|
|
this bug was caught by the new footer-corruption check in realloc and
free.
if the block returned by malloc was already aligned to the desired
alignment, memalign's logic to split off the misaligned head was
incorrect; rather than writing to a point inside the allocated block,
it was overwriting the footer of the previous block on the heap with
the value 1 (length 0 plus an in-use flag).
fortunately, the impact of this bug was fairly low. (this is probably
why it was not caught sooner.) due to the way the heap works, malloc
will never return a block whose previous block is free. (doing so would
be harmful because it would increase fragmentation with no benefit.)
the footer is actually not needed for in-use blocks, except that its
in-use bit needs to remain set so that it does not get merged with
free blocks, so there was no harm in it being set to 1 instead of the
correct value.
however, there is one case where this bug could have had an impact: in
multi-threaded programs, if another thread freed the previous block
after memalign's call to malloc returned, but before memalign
overwrote the previous block's footer, the resulting block in the free
list could be left in a corrupt state. I have not analyzed the impact
of this bad state and whether it could lead to more serious
malfunction.
|
|
the motivation for this patch is that the vast majority of libc is
code that does not benefit at all from optimizations, but that certain
components like string/memory operations can be major performance
bottlenecks.
at the same time, the old -falign-*=1 options are removed, since they
were only beneficial for avoiding bloat when global -O3 was used, and
in that case, they may have prevented some of the performance gains.
to be the most useful, this patch will need further tuning. in
particular, research is needed to determine which components should be
built with -O3 by default, and it may be desirable to remove the
hard-coded -O3 and instead allow more customization of the
optimization level used for selected modules.
|
|
this patch is something of a compromise for a compatibility
regression discovered after the header refactoring: libtiff uses
_Int64 for its own use. this is absolutely wrong, invalid C, and
should not be supported, but it's also frustrating for users when code
that used to work suddenly breaks.
rather than leave the breakage in place or change musl internals to
accommodate broken software, I've found a change that makes the
problem go away and improves musl. by undefining these macros at the
end of alltypes.h, the temptation to use them in other headers is
removed. (for example, I almost used _Int64 in sys/types.h to define
u_int64_t rather than adding it back to alltypes.h.) by confining use
of these macros to alltypes.h, we keep it easy to go back and change
the implementation of alltypes later, if needed.
|
|
i386 was done with the big commit but I missed the others
|
|
during the header refactoring, I had moved u_int64_t out of alltypes
under the assumption that we could just use long long everywhere.
however, it seems some broken applications make inconsistent mixed use
of u_int64_t and uint64_t, resulting in build errors when the
underlying type differs.
|
|
rather than moving nlink_t back to the arch-specific file, I've added
a macro _Reg defined to the canonical type for register-size values on
the arch. this is not the same as _Addr for (not-yet-supported)
32-on-64 pseudo-archs like x32 and mips n32, so a new macro was
needed.
|
|
for regoff_t, it's impossible to match on 64-bit archs because glibc
defined the type in a non-conforming way. however this change makes
the type match on 32-bit archs.
|