summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2018-02-22arm: add get_tls syscall from linux v4.15Szabolcs Nagy1-0/+1
for systems without tp register or kuser helper, new in linux commit 8fcd6c45f5a65621ec809b7866a3623e9a01d4ed
2017-11-05add statx syscall numbers from linux v4.11Szabolcs Nagy1-0/+1
statx was added in linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f (there is no libc wrapper yet and microblaze and sh misses the number).
2017-10-25fix build regression on ARM for ISA levels less than v5Rich Felker1-0/+4
commit 06fbefd10046a0fae7e588b7c6d25fb51811b931 (first included in release 1.1.17) introduced this regression. patch by Adrian Bunk. it fixes the regression in all cases, but spuriously prevents use of the clz instruction on very old compiler versions that don't define __ARM_ARCH. this may be fixed in a more general way at some point in the future. it also omits thumb1 logic since building as thumb1 code is currently not supported.
2017-09-06make syscall.h consistent with linuxSzabolcs Nagy1-0/+2
most of the found naming differences don't matter to musl, because internally it unifies the syscall names that vary across targets, but for external code the names should match the kernel uapi. aarch64: __NR_fstatat is called __NR_newfstatat in linux. __NR_or1k_atomic got mistakenly copied from or1k. arm: __NR_arm_sync_file_range is an alias for __NR_sync_file_range2 __NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux, the old non-arm name is kept too, it should not cause issues. (powerpc has similar nonstandard fadvise and it uses the normal name.) i386: __NR_madvise1 was removed from linux in commit 303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11 microblaze: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite had different name in linux. mips: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select had different name in linux. mipsn32: __NR_fstatat is called __NR_newfstatat in linux. or1k: __NR__llseek is called __NR_llseek in linux. the old name is kept too because that's the name musl uses internally. powerpc: __NR_{get,set}res{gid,uid}32 was never present in powerpc linux. __NR_timerfd was briefly defined in linux but then got renamed.
2017-08-29arm: add HWCAP_ARM_ hwcap macrosSzabolcs Nagy1-0/+24
Glibc renamed the linux uapi HWCAP_* macros to HWCAP_ARM_* so have both variants in case some code depends on it. (The HWCAP2_ macros are not defined in glibc currently so those only have the linux uapi variant.)
2017-08-29add a_clz_64 helper functionSzabolcs Nagy1-0/+7
counts leading zero bits of a 64bit int, undefined on zero input. (has nothing to do with atomics, added to atomic.h so target specific helper functions are together.) there is a logarithmic generic implementation and another in terms of a 32bit a_clz_32 on targets where that's available.
2017-02-22allow page size to vary on armRich Felker1-1/+0
the ABI for arm was silently changed at some point to allow page sizes other than 4k; traditional binaries built with only 4k-aligned offsets between load segments cannot run on such systems, but newer binutils versions use 64k offset alignment. while larger page size is undesirable for various reasons, users have encountered hardware and/or kernels that lock the page size to a larger value, so follow the new ABI and allow it to vary.
2016-12-29add pkey_{mprotect,alloc,free} syscalls from linux v4.9Szabolcs Nagy1-0/+3
see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a and linux Documentation/x86/protection-keys.txt
2016-12-19rework arm atomic/tp backends to be thumb-compatible and fdpic-readyRich Felker2-14/+23
three problems are addressed: - use of pc arithmetic, which was difficult if not impossible to make correct in thumb mode on all models, so that relative rather than absolute pointers to the backends could be used. this was designed back when there was no coherent model for the early stages of the dynamic linker before relocations, and is no longer necessary. - assumption that data (the relative pointers to the backends) can be accessed at a constant displacement from the code. this will not be possible on future fdpic subarchs (for cortex-m), so move responsibility for loading the backend code address to the caller. - hard-coded arm opcodes using the .word directive. instead, use the .arch directive to work around the assembler's refusal to assemble instructions not available (or in some cases, available but just considered deprecated) in the target isa level. the obscure v6t2 arch is used for v6 code so as to (1) allow generation of thumb2 output if -mthumb is active, and (2) avoid warnings/errors for mcr barriers that clang would produce if we just set arch to v7-a. in addition, the __aeabi_read_tp function is moved out of the inner workings and implemented as an asm wrapper around a C function, so that asm code does not need to read global data. the asm wrapper serves to satisfy the ABI calling convention requirements for this function.
2016-10-20add bits/hwcap.h and include it in sys/auxv.hSzabolcs Nagy1-0/+29
aarch64, arm, mips, mips64, mipsn32, powerpc, powerpc64 and sh have cpu feature bits defined in linux for AT_HWCAP auxv entry, so expose those in sys/auxv.h it seems the mips hwcaps were never exposed to userspace neither by linux nor by glibc, but that's most likely an oversight.
2016-07-03make brace placement in public header typedef'd structs consistentRich Felker1-2/+1
commit befa5866ee30d09c0c96e88af2eabff5911342ea performed this change for struct definitions that did not also involve typedef, but omitted the latter.
2016-07-03make brace placement in public header struct definitions consistentRich Felker1-2/+1
placing the opening brace on the same line as the struct keyword/tag is the style I prefer and seems to be the prevailing practice in more recent additions. these changes were generated by the command: find include/ arch/*/bits -name '*.h' \ -exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} + and subsequently checked by hand to ensure that the regex did not pick up any false positives.
2016-07-03fix FIOQSIZE in arm ioctl.hSzabolcs Nagy1-0/+2
arm ioctl.h is the same as the generic one except this macro, so a workaround solution is used to avoid another ioctl.h copy.
2016-07-01fix posix_fadvise syscall args on powerpc, unify with arm fixRich Felker1-0/+2
commit 6d38c9cf80f47623e5e48190046673bbd0dc410b provided an arm-specific version of posix_fadvise to address the alternate argument order the kernel expects on arm, but neglected to address that powerpc (32-bit) has the same issue. instead of having arch variant files in duplicate, simply put the alternate version in the top-level file under the control of a macro defined in syscall_arch.h.
2016-06-09add preadv2 and pwritev2 syscall numbers for linux v4.6Szabolcs Nagy1-0/+2
the syscalls take an additional flag argument, they were added in commit f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09. the syscall is not allocated for microblaze and sh yet.
2016-05-12deduplicate __NR_* and SYS_* syscall number definitionsBobby Bingham1-349/+0
2016-03-19add copy_file_range syscall numbers from linux v4.5Szabolcs Nagy1-0/+2
it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
2016-03-18deduplicate bits/mman.hSzabolcs Nagy1-59/+0
currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
2016-01-31better a_sc inline asm constraint on aarch64 and armSzabolcs Nagy1-1/+1
"Q" input constraint was used for the written object, instead of "=Q" output constraint. this should not cause problems because "memory" is on the clobber list, but "=Q" better documents the intent and more consistent with the actual asm code. this changes the generated code, because different registers are used, but other than the register names nothing should change.
2016-01-27deduplicate the bulk of the arch bits headersRich Felker13-594/+0
all bits headers that were identical for a number of 'clean' archs are moved to the new arch/generic tree. in addition, a few headers that differed only cosmetically from the new generic version are removed. additional deduplication may be possible in mman.h and in several headers (limits.h, posix.h, stdint.h) that mostly depend on whether the arch is 32- or 64-bit, but they are left alone for now because greater gains are likely possible with more invasive changes to header logic, which is beyond the scope of this commit.
2016-01-26add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flagsSzabolcs Nagy1-0/+1
they lock faulted pages into memory (useful when a small part of a large mapped file needs efficient access), new in linux v4.4, commit b0f205c2a3082dd9081f9a94e50658c5fa906ff1 MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
2016-01-26add mlock2 syscall number from linux v4.4Szabolcs Nagy1-0/+2
this is mlock with a flags argument, new in linux commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e as usual microblaze and sh don't have allocated syscall number yet.
2016-01-26add new membarrier, userfaultfd and switch_endian syscallsSzabolcs Nagy1-0/+4
new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc, x32 and x86_64. membarrier is a system wide memory barrier, moves most of the synchronization cost to one side, new in kernel commit 5b25b13ab08f616efd566347d809b4ece54570d1 userfaultfd is useful for qemu and is new in kernel commit 8d2afd96c20316d112e04d935d9e09150e988397 switch_endian is powerpc only for switching endianness, new in commit 529d235a0e190ded1d21ccc80a73e625ebcad09b
2016-01-25fix arm a_crash for big endianRich Felker1-2/+4
contrary to commit 89e149d275a7699a4a5e4c98bab267648f64cbba, big endian arm does need the instruction bytes in big endian order. rather than trying to use a special encoding that works as arm or thumb, simply encode the simplest/canonical undefined instructions dependent on whether __thumb__ is defined.
2016-01-25add native a_crash primitive for armRich Felker1-0/+10
the .byte directive encodes a guaranteed-undefined instruction, the same one Linux fills the kuser helper page with when it's disabled. the udf mnemonic and and .insn directives are not supported by old binutils versions, and larger-than-byte integer directives would produce the wrong output on big-endian.
2016-01-22move arm-specific translation units out of arch/arm/src, to src/*/armRich Felker8-244/+0
this is possible with the new build system that allows src/*/$(ARCH)/* files which do not shadow a file in the parent directory, and yields a more logical organization. eventually it will be possible to remove arch/*/src from the build system.
2016-01-21overhaul arm atomics for new atomics frameworkRich Felker1-142/+38
switch to ll/sc model so that new atomic.h can provide optimized versions of all the atomic primitives without needing an ll/sc loop written in asm for each one. all isa levels which use ldrex/strex now use the inline ll/sc model even if the type of barrier to use is not known until runtime (v6). the cas model is only used for arm v5 and earlier, and it has been optimized to make the call via inline asm with custom constraints rather than as a C function call.
2016-01-21refactor internal atomic.hRich Felker1-104/+11
rather than having each arch provide its own atomic.h, there is a new shared atomic.h in src/internal which pulls arch-specific definitions from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal, defining only a_cas or new ll/sc type primitives which the shared atomic.h will use to construct everything else. this commit avoids making heavy changes to the individual archs' atomic implementations. definitions which are identical or near-identical to what the new shared atomic.h would produce have been removed, but otherwise the changes made are just hooking up the arch-specific files to the new infrastructure. major changes to take advantage of the new system will come in subsequent commits.
2016-01-20fix build regression for arm pre-v7 from out-of-tree build patchRich Felker2-0/+0
commit 2f853dd6b9a95d5b13ee8f9df762125e0588df5d failed to replicate the old makefile logic that caused arch/arm/src/arm/atomics.s to be built. since this was the only .s file under arch/*/src, rather than trying to reproduce the old logic, I'm just moving it up a level and adjusting the glob pattern in the makefile to catch it. eventually arch/*/src will probably be removed in favor of moving all these files to appropriate src/*/$(ARCH) locations.
2016-01-20fix dynamic linker path file selection for arm vs armhfRich Felker1-3/+3
the __SOFTFP__ macro which was wrongly being used does not reflect the ABI (arm vs armhf) but just the availability of floating point instructions/registers, so -mfloat-abi=softfp was wrongly being treated as armhf. __ARM_PCS_VFP is the correct predefined macro to check for the armhf EABI variant. this macro usage was corrected for the build process in commit 4918c2bb206bfaaf5a1f7d3448c2f63d5e2b7d56 but reloc.h was apparently overlooked at the time.
2015-11-10explicitly assemble all arm asm sources as UALRich Felker1-0/+1
these files are all accepted as legacy arm syntax when producing arm code, but legacy syntax cannot be used for producing thumb2 with access to the full ISA. even after switching to UAL, some asm source files contain instructions which are not valid in thumb mode, so these will need to be addressed separately.
2015-11-09remove non-working pre-armv4t support from arm asmRich Felker2-11/+0
the idea of the three-instruction sequence being removed was to be able to return to thumb code when used on armv4t+ from a thumb caller, but also to be able to run on armv4 without the bx instruction available (in which case the low bit of lr would always be 0). however, without compiler support for generating such a sequence from C code, which does not exist and which there is unlikely to be interest in implementing, there is little point in having it in the asm, and it would likely be easier to add pre-armv4t support via enhanced linker handling of R_ARM_V4BX than at the compiler level. removing this code simplifies adding support for building libc in thumb2-only form (for cortex-m).
2015-11-02properly access mcontext_t program counter in cancellation handlerRich Felker1-1/+1
using the actual mcontext_t definition rather than an overlaid pointer array both improves correctness/readability and eliminates some ugly hacks for archs with 64-bit registers bit 32-bit program counter. also fix UB due to comparison of pointers not in a common array object.
2015-10-15mark arm thread-pointer-loading inline asm as volatileRich Felker1-3/+3
this builds on commits a603a75a72bb469c6be4963ed1b55fabe675fe15 and 0ba35d69c0e77b225ec640d2bd112ff6d9d3b2af to ensure that a compiler cannot conclude that it's valid to reorder the asm to a point before the thread pointer is set up, or to treat the inline function as if it were declared with attribute((const)). other archs already use volatile asm for thread pointer loading.
2015-10-15remove attribute((const)) from arm __pthread_self inline functionRich Felker1-2/+2
commit a603a75a72bb469c6be4963ed1b55fabe675fe15 did this for the public pthread_self function but not the internal inline one.
2015-08-31implement arm eabi mem* functionsTimo Teräs4-0/+36
these functions are part of the ARM EABI, meaning compilers may generate references to them. known versions of gcc do not use them, but llvm does. they are not provided by libgcc, and the de facto standard seems to be that libc provides them.
2015-06-14arm: add vdso supportSzabolcs Nagy1-0/+4
vdso will be available on arm in linux v4.2, the user-space code for it is in kernel commit 8512287a8165592466cb9cb347ba94892e9c56a5
2015-05-22add .text section directive to all crt_arch.h files missing itRich Felker1-0/+1
i386 and x86_64 versions already had the .text directive; other archs did not. normally, top-level (file scope) __asm__ starts in the .text section anyway, but problems were reported with some versions of clang, and it seems preferable to set it explicitly anyway, at least for the sake of consistency between archs.
2015-05-14make arm reloc.h CRTJMP macro compatible with thumbRich Felker1-0/+5
compilers targeting armv7 may be configured to produce thumb2 code instead of arm code by default, and in the future we may wish to support targets where only the thumb instruction set is available. the instructions this patch omits in thumb mode are needed only for non-thumb versions of armv4 or earlier, which are not supported by any current compilers/toolchains and thus rather pointless to have. at some point these compatibility return sequences may be removed from all asm source files, and in that case it would make sense to remove them here too and remove the ifdef.
2015-05-14make arm crt_arch.h compatible with thumb code generationRich Felker1-4/+6
compilers targeting armv7 may be configured to produce thumb2 code instead of arm code by default, and in the future we may wish to support targets where only the thumb instruction set is available. the changes made here avoid operating directly on the sp register, which is not possible in thumb code, and address an issue with the way the address of _DYNAMIC is computed. previously, the relative address of _DYNAMIC was stored with an additional offset of -8 versus the pc-relative add instruction, since on arm the pc register evaluates to ".+8". in thumb code, it instead evaluates to ".+4". both are two (normal-size) instructions beyond "." in the current execution mode, so the numbered label 2 used in the relative address expression is simply moved two instructions ahead to be compatible with both instruction sets.
2015-04-30fix __syscall declaration with wrong visibility in syscall_arch.hSzabolcs Nagy1-2/+0
remove __syscall declaration where it is not needed (aarch64, arm, microblaze, or1k) and add the hidden attribute where it is (mips).
2015-04-13dynamic linker bootstrap overhaulRich Felker2-34/+27
this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-01move O_PATH definition back to arch bitsRich Felker1-0/+1
while it's the same for all presently supported archs, it differs at least on sparc, and conceptually it's no less arch-specific than the other O_* macros. O_SEARCH and O_EXEC are still defined in terms of O_PATH in the main fcntl.h.
2015-03-18fix MINSIGSTKSZ values for archs with large signal contextsRich Felker1-0/+5
the previous values (2k min and 8k default) were too small for some archs. aarch64 reserves 4k in the signal context for future extensions and requires about 4.5k total, and powerpc reportedly uses over 2k. the new minimums are chosen to fit the saved context and also allow a minimal signal handler to run. since the default (SIGSTKSZ) has always been 6k larger than the minimum, it is also increased to maintain the 6k usable by the signal handler. this happens to be able to store one pathname buffer and should be sufficient for calling any function in libc that doesn't involve conversion between floating point and decimal representations. x86 (both 32-bit and 64-bit variants) may also need a larger minimum (around 2.5k) in the future to support avx-512, but the values on these archs are left alone for now pending further analysis. the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ at this time. this is so as not to preclude applications from using extremely small thread stacks when they know they will not be handling signals. unfortunately cancellation and multi-threaded set*id() use signals as an implementation detail and therefore require a stack large enough for a signal context, so applications which use extremely small thread stacks may still need to avoid using these features.
2015-03-07fix FLT_ROUNDS to reflect the current rounding modeSzabolcs Nagy1-1/+0
Implemented as a wrapper around fegetround introducing a new function to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
2015-03-04fix POLLWRNORM and POLLWRBAND on mipsTrutz Behn1-0/+0
these macros have the same distinct definition on blackfin, frv, m68k, mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally differ on sparc.
2015-03-03make all objects used with atomic operations volatileRich Felker1-7/+7
the memory model we use internally for atomics permits plain loads of values which may be subject to concurrent modification without requiring that a special load function be used. since a compiler is free to make transformations that alter the number of loads or the way in which loads are performed, the compiler is theoretically free to break this usage. the most obvious concern is with atomic cas constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be transformed to a_cas(p,*p,f(*p)); where the latter is intended to show multiple loads of *p whose resulting values might fail to be equal; this would break the atomicity of the whole operation. but even more fundamental breakage is possible. with the changes being made now, objects that may be modified by atomics are modeled as volatile, and the atomic operations performed on them by other threads are modeled as asynchronous stores by hardware which happens to be acting on the request of another thread. such modeling of course does not itself address memory synchronization between cores/cpus, but that aspect was already handled. this all seems less than ideal, but it's the best we can do without mandating a C11 compiler and using the C11 model for atomics. in the case of pthread_once_t, the ABI type of the underlying object is not volatile-qualified. so we are assuming that accessing the object through a volatile-qualified lvalue via casts yields volatile access semantics. the language of the C standard is somewhat unclear on this matter, but this is an assumption the linux kernel also makes, and seems to be the correct interpretation of the standard.
2015-02-09add syscall numbers for the new execveat syscallSzabolcs Nagy1-0/+2
this syscall allows fexecve to be implemented without /proc, it is new in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874 (sh and microblaze do not have allocated syscall numbers yet) added a x32 fix as well: the io_setup and io_submit syscalls are no longer common with x86_64, so use the x32 specific numbers.
2015-01-30move MREMAP_MAYMOVE and MREMAP_FIXED out of bitsTrutz Behn1-3/+0
the definitions are generic for all kernel archs. exposure of these macros now only occurs on the same feature test as for the function accepting them, which is believed to be more correct.
2014-12-23add new syscall numbers for bpf and kexec_file_loadSzabolcs Nagy1-0/+2
these syscalls are new in linux v3.18, bpf is present on all supported archs except sh, kexec_file_load is only allocted for x86_64 and x32 yet. bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60 kexec_file_load syscall number was allocated in commit f0895685c7fd8c938c91a9d8a6f7c11f22df58d2