summaryrefslogtreecommitdiff
path: root/arch/i386/bits
AgeCommit message (Collapse)AuthorFilesLines
2019-07-29duplicate generic bits/sem.h for each arch using it, in prep to changeRich Felker1-0/+16
2019-07-29remove trailing newlines from various versions of bits/shm.hRich Felker1-1/+0
2019-07-29duplicate generic bits/shm.h for each arch using it, in prep to changeRich Felker1-0/+28
there are more archs sharing the generic 64-bit version of the struct, which is uniform and much more reasonable, than sharing the current "generic" one, and depending on how time64 sysvipc is done for 32-bit archs, even more may be sharing the "64-bit version" in the future. so, duplicate the current generic to all archs using it (arm, i386, m68k, microblaze, or1k) so that the generic can be changed freely. this is recorded as its own commit mainly as a hint to git tooling, to assist in copy/move tracking.
2019-07-01add new syscall numbers from linux v5.1Szabolcs Nagy1-0/+34
syscall numbers are now synced up across targets (starting from 403 the numbers are the same on all targets other than an arch specific offset) IPC syscalls sem*, shm*, msg* got added where they were missing (except for semop: only semtimedop got added), the new semctl, shmctl, msgctl imply IPC_64, see linux commit 0d6040d4681735dfc47565de288525de405a5c99 arch: add split IPC system calls where needed new 64bit time_t syscall variants got added on 32bit targets, see linux commit 48166e6ea47d23984f0b481ca199250e1ce0730a y2038: add 64-bit time_t syscalls to all 32-bit architectures new async io syscalls got added, see linux commit 2b188cc1bb857a9d4701ae59aa7768b5124e262e Add io_uring IO interface linux commit edafccee56ff31678a091ddb7219aba9b28bc3cb io_uring: add support for pre-mapped user IO buffers a new syscall got added that uses the fd of /proc/<pid> as a stable handle for processes: allows sending signals without pid reuse issues, intended to eventually replace rt_sigqueueinfo, kill, tgkill and rt_tgsigqueueinfo, see linux commit 3eb39f47934f9d5a3027fe00d906a45fe3a15fad signal: add pidfd_send_signal() syscall on some targets (arm, m68k, s390x, sh) some previously missing syscall numbers got added as well.
2018-12-09add io_pgetevents and rseq syscall numbers from linux v4.18Szabolcs Nagy1-0/+2
io_pgetevents is new in linux commit 7a074e96dee62586c935c80cecd931431bfdd0be rseq is new in linux commit d7822b1e24f2df5df98c76f0e94a5416349ff759
2018-07-17add support for arch-specific ptrace command macrosSzabolcs Nagy1-0/+11
sys/ptrace.h is target specific, use bits/ptrace.h to add target specific macro definitions. these macros are kept in the generic sys/ptrace.h even though some targets don't support them: PTRACE_GETREGS PTRACE_SETREGS PTRACE_GETFPREGS PTRACE_SETFPREGS PTRACE_GETFPXREGS PTRACE_SETFPXREGS so no macro definition got removed in this patch on any target. only s390x has a numerically conflicting macro definition (PTRACE_SINGLEBLOCK). the PT_ aliases follow glibc headers, otherwise the definitions come from linux uapi headers except ones that are skipped in glibc and there is no real kernel support (s390x PTRACE_*_AREA) or need special type definitions (mips PTRACE_*_WATCH_*) or only relevant for linux 2.4 compatibility (PTRACE_OLDSETOPTIONS).
2018-03-10use PAGESIZE rather than PAGE_SIZE in user.h bitsRich Felker1-2/+2
align with commit c9c2cd3e6955cb1d57b8be01d4b072bf44058762.
2018-03-10reverse definition dependency between PAGESIZE and PAGE_SIZERich Felker1-1/+1
PAGESIZE is actually the version defined in POSIX base, with PAGE_SIZE being in the XSI option. use PAGESIZE as the underlying definition to facilitate making exposure of PAGE_SIZE conditional.
2017-11-05i386: add arch_prctl syscall number from linux v4.12Szabolcs Nagy1-0/+1
syscall for i386 compat mode on x86_64 for non-x86_64 prctls. new in linux commit 79170fda313ed5be2394f87aa2a00d597f8ed4a1
2017-11-05add statx syscall numbers from linux v4.11Szabolcs Nagy1-0/+1
statx was added in linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f (there is no libc wrapper yet and microblaze and sh misses the number).
2017-09-06make syscall.h consistent with linuxSzabolcs Nagy1-1/+0
most of the found naming differences don't matter to musl, because internally it unifies the syscall names that vary across targets, but for external code the names should match the kernel uapi. aarch64: __NR_fstatat is called __NR_newfstatat in linux. __NR_or1k_atomic got mistakenly copied from or1k. arm: __NR_arm_sync_file_range is an alias for __NR_sync_file_range2 __NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux, the old non-arm name is kept too, it should not cause issues. (powerpc has similar nonstandard fadvise and it uses the normal name.) i386: __NR_madvise1 was removed from linux in commit 303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11 microblaze: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite had different name in linux. mips: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select had different name in linux. mipsn32: __NR_fstatat is called __NR_newfstatat in linux. or1k: __NR__llseek is called __NR_llseek in linux. the old name is kept too because that's the name musl uses internally. powerpc: __NR_{get,set}res{gid,uid}32 was never present in powerpc linux. __NR_timerfd was briefly defined in linux but then got renamed.
2017-01-04reduce impact of REG_* namespace pollution in x86[_64] signal.hRich Felker1-19/+38
when _GNU_SOURCE is defined, which is always the case when compiling c++ with gcc, these macros for the the indices in gregset_t are exposed and likely to clash with applications. by using enum constants rather than macros defined with integer literals, we can make the clash slightly less likely to break software. the macros are still defined in case anything checks for them with #ifdef, but they're defined to expand to themselves so that non-file-scope (e.g. namespaced) identifiers by the same names still work. for the sake of avoiding mistakes, the changes were generated with sed via the command: sed -i -e 's/#define *\(REG_[A-Z_0-9]\{1,\}\) *\([0-9]\{1,\}\)'\ '/enum { \1 = \2 };\n#define \1 \1/' \ arch/i386/bits/signal.h arch/x86_64/bits/signal.h arch/x32/bits/signal.h
2016-12-29add pkey_{mprotect,alloc,free} syscalls from linux v4.9Szabolcs Nagy1-0/+3
see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a and linux Documentation/x86/protection-keys.txt
2016-12-15remove legacy i386 fallback stdarg implementation and frameworkRich Felker1-9/+0
this has been slated for removal for a long time. there is fundamentally no way to implement stdarg without compiler assistance; any attempt to do so has serious undefined behavior; its working depends not just (as a common misconception goes) on ABI, but also on assumptions about compiler code generation internal to a translation unit, which is not subject to external ABI constraints.
2016-07-03make brace placement in public header typedef'd structs consistentRich Felker1-4/+2
commit befa5866ee30d09c0c96e88af2eabff5911342ea performed this change for struct definitions that did not also involve typedef, but omitted the latter.
2016-07-03make brace placement in public header struct definitions consistentRich Felker2-6/+3
placing the opening brace on the same line as the struct keyword/tag is the style I prefer and seems to be the prevailing practice in more recent additions. these changes were generated by the command: find include/ arch/*/bits -name '*.h' \ -exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} + and subsequently checked by hand to ensure that the regex did not pick up any false positives.
2016-06-09add preadv2 and pwritev2 syscall numbers for linux v4.6Szabolcs Nagy1-0/+2
the syscalls take an additional flag argument, they were added in commit f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09. the syscall is not allocated for microblaze and sh yet.
2016-05-12deduplicate __NR_* and SYS_* syscall number definitionsBobby Bingham1-381/+0
2016-03-19add copy_file_range syscall numbers from linux v4.5Szabolcs Nagy1-0/+2
it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
2016-03-18deduplicate bits/mman.hSzabolcs Nagy1-59/+0
currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
2016-01-27deduplicate the bulk of the arch bits headersRich Felker12-630/+0
all bits headers that were identical for a number of 'clean' archs are moved to the new arch/generic tree. in addition, a few headers that differed only cosmetically from the new generic version are removed. additional deduplication may be possible in mman.h and in several headers (limits.h, posix.h, stdint.h) that mostly depend on whether the arch is 32- or 64-bit, but they are left alone for now because greater gains are likely possible with more invasive changes to header logic, which is beyond the scope of this commit.
2016-01-26add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flagsSzabolcs Nagy1-0/+1
they lock faulted pages into memory (useful when a small part of a large mapped file needs efficient access), new in linux v4.4, commit b0f205c2a3082dd9081f9a94e50658c5fa906ff1 MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
2016-01-26add mlock2 syscall number from linux v4.4Szabolcs Nagy1-0/+2
this is mlock with a flags argument, new in linux commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e as usual microblaze and sh don't have allocated syscall number yet.
2016-01-26add new membarrier, userfaultfd and switch_endian syscallsSzabolcs Nagy1-0/+4
new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc, x32 and x86_64. membarrier is a system wide memory barrier, moves most of the synchronization cost to one side, new in kernel commit 5b25b13ab08f616efd566347d809b4ece54570d1 userfaultfd is useful for qemu and is new in kernel commit 8d2afd96c20316d112e04d935d9e09150e988397 switch_endian is powerpc only for switching endianness, new in commit 529d235a0e190ded1d21ccc80a73e625ebcad09b
2016-01-26add new i386 socket syscall numbersSzabolcs Nagy1-0/+30
new in linux v4.3 commit 9dea5dc921b5f4045a18c63eb92e84dc274d17eb direct calls instead of socketcall allow better seccomp filtering. musl continues to use socketcalls internally on i386. (older kernels would need a fallback mechanism if the direct calls were used.)
2015-12-29adjust i386 max_align_t definition to work around some broken compilersRich Felker1-3/+5
at least gcc 4.7 claims c++11 support but does not accept the alignas keyword, causing breakage when stddef.h is included in c++11 mode. instead, prefer using __attribute__((__aligned__)) on any compiler with GNU extensions, and only use the alignas keyword as a fallback for other C++ compilers. C code should not be affected by this patch.
2015-04-01move O_PATH definition back to arch bitsRich Felker1-0/+1
while it's the same for all presently supported archs, it differs at least on sparc, and conceptually it's no less arch-specific than the other O_* macros. O_SEARCH and O_EXEC are still defined in terms of O_PATH in the main fcntl.h.
2015-03-18fix MINSIGSTKSZ values for archs with large signal contextsRich Felker1-0/+5
the previous values (2k min and 8k default) were too small for some archs. aarch64 reserves 4k in the signal context for future extensions and requires about 4.5k total, and powerpc reportedly uses over 2k. the new minimums are chosen to fit the saved context and also allow a minimal signal handler to run. since the default (SIGSTKSZ) has always been 6k larger than the minimum, it is also increased to maintain the 6k usable by the signal handler. this happens to be able to store one pathname buffer and should be sufficient for calling any function in libc that doesn't involve conversion between floating point and decimal representations. x86 (both 32-bit and 64-bit variants) may also need a larger minimum (around 2.5k) in the future to support avx-512, but the values on these archs are left alone for now pending further analysis. the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ at this time. this is so as not to preclude applications from using extremely small thread stacks when they know they will not be handling signals. unfortunately cancellation and multi-threaded set*id() use signals as an implementation detail and therefore require a stack large enough for a signal context, so applications which use extremely small thread stacks may still need to avoid using these features.
2015-03-07fix FLT_ROUNDS to reflect the current rounding modeSzabolcs Nagy1-1/+0
Implemented as a wrapper around fegetround introducing a new function to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
2015-03-04fix POLLWRNORM and POLLWRBAND on mipsTrutz Behn1-0/+0
these macros have the same distinct definition on blackfin, frv, m68k, mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally differ on sparc.
2015-03-03make all objects used with atomic operations volatileRich Felker1-7/+7
the memory model we use internally for atomics permits plain loads of values which may be subject to concurrent modification without requiring that a special load function be used. since a compiler is free to make transformations that alter the number of loads or the way in which loads are performed, the compiler is theoretically free to break this usage. the most obvious concern is with atomic cas constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be transformed to a_cas(p,*p,f(*p)); where the latter is intended to show multiple loads of *p whose resulting values might fail to be equal; this would break the atomicity of the whole operation. but even more fundamental breakage is possible. with the changes being made now, objects that may be modified by atomics are modeled as volatile, and the atomic operations performed on them by other threads are modeled as asynchronous stores by hardware which happens to be acting on the request of another thread. such modeling of course does not itself address memory synchronization between cores/cpus, but that aspect was already handled. this all seems less than ideal, but it's the best we can do without mandating a C11 compiler and using the C11 model for atomics. in the case of pthread_once_t, the ABI type of the underlying object is not volatile-qualified. so we are assuming that accessing the object through a volatile-qualified lvalue via casts yields volatile access semantics. the language of the C standard is somewhat unclear on this matter, but this is an assumption the linux kernel also makes, and seems to be the correct interpretation of the standard.
2015-02-09add syscall numbers for the new execveat syscallSzabolcs Nagy1-0/+2
this syscall allows fexecve to be implemented without /proc, it is new in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874 (sh and microblaze do not have allocated syscall numbers yet) added a x32 fix as well: the io_setup and io_submit syscalls are no longer common with x86_64, so use the x32 specific numbers.
2015-01-30move MREMAP_MAYMOVE and MREMAP_FIXED out of bitsTrutz Behn1-3/+0
the definitions are generic for all kernel archs. exposure of these macros now only occurs on the same feature test as for the function accepting them, which is believed to be more correct.
2014-12-23add new syscall numbers for bpf and kexec_file_loadSzabolcs Nagy1-0/+2
these syscalls are new in linux v3.18, bpf is present on all supported archs except sh, kexec_file_load is only allocted for x86_64 and x32 yet. bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60 kexec_file_load syscall number was allocated in commit f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
2014-12-21move wint_t definition to the shared part of alltypes.h.inRich Felker1-1/+0
2014-10-08add new syscall numbers for seccomp, getrandom, memfd_createSzabolcs Nagy1-0/+6
these syscalls are new in linux v3.17 and present on all supported archs except sh. seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c it has operation, flags and pointer arguments (if flags==0 then it is the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag definitions is linux/seccomp.h getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895 it provides an entropy source when open("/dev/urandom",..) would fail, the uapi header for flags is linux/random.h memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c it allows anon mmap to have an fd, that can be shared, sealed and needs no mount point, the uapi header for flags is linux/memfd.h
2014-09-11fix C++ incompatibility in i386 definition of max_align_tRich Felker1-0/+4
the C11 _Alignas keyword is not present in C++, and despite it being in the reserved namespace and thus reasonable to support even in non-C11 modes, compilers seem to fail to support it.
2014-09-06add threads.h and needed per-arch types for mtx_t and cnd_tRich Felker1-0/+2
based on patch by Jens Gustedt. mtx_t and cnd_t are defined in such a way that they are formally "compatible types" with pthread_mutex_t and pthread_cond_t, respectively, when accessed from a different translation unit. this makes it possible to implement the C11 functions using the pthread functions (which will dereference them with the pthread types) without having to use the same types, which would necessitate either namespace violations (exposing pthread type names in threads.h) or incompatible changes to the C++ name mangling ABI for the pthread types. for the rest of the types, things are much simpler; using identical types is possible without any namespace considerations.
2014-08-20add max_align_t definition for C11 and C++11Rich Felker1-0/+2
unfortunately this needs to be able to vary by arch, because of a huge mess GCC made: the GCC definition, which became the ABI, depends on quirks in GCC's definition of __alignof__, which does not match the formal alignment of the type. GCC's __alignof__ unexpectedly exposes the an implementation detail, its "preferred alignment" for the type, rather than the formal/ABI alignment of the type, which it only actually uses in structures. on most archs the two values are the same, but on some (at least i386) the preferred alignment is greater than the ABI alignment. I considered using _Alignas(8) unconditionally, but on at least one arch (or1k), the alignment of max_align_t with GCC's definition is only 4 (even the "preferred alignment" for these types is only 4).
2014-08-17make pointers used in robust list volatileRich Felker1-1/+1
when manipulating the robust list, the order of stores matters, because the code may be asynchronously interrupted by a fatal signal and the kernel will then access the robust list in what is essentially an async-signal context. previously, aliasing considerations made it seem unlikely that a compiler could reorder the stores, but proving that they could not be reordered incorrectly would have been extremely difficult. instead I've opted to make all the pointers used as part of the robust list, including those in the robust list head and in the individual mutexes, volatile. in addition, the format of the robust list has been changed to point back to the head at the end, rather than ending with a null pointer. this is to match the documented kernel robust list ABI. the null pointer, which was previously used, only worked because faults during access terminate the robust list processing.
2014-07-20add syscall numbers for the new renameat2 syscallSzabolcs Nagy1-0/+2
it's like rename but with flags eg. to allow atomic exchange of two files, introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff
2014-05-30add sched_{get,set}attr syscall numbers and SCHED_DEADLINE macroSzabolcs Nagy1-0/+4
linux 3.14 introduced sched_getattr and sched_setattr syscalls in commit d50dde5a10f305253cbc3855307f608f8a3c5f73 and the related SCHED_DEADLINE scheduling policy in commit aab03e05e8f7e26f51dee792beddcb5cca9215a5 but struct sched_attr "extended scheduling parameters data structure" is not yet exported to userspace (necessary for using the syscalls) so related uapi definitions are not added yet.
2014-04-15fix RLIMIT_ constants for mipsSzabolcs Nagy1-0/+0
The mips arch is special in that it uses different RLIMIT_ numbers than other archs, so allow bits/resource.h to override the default RLIMIT_ numbers (empty on all archs except mips). Reported by orc.
2014-03-18fix signal.h breakage from moving stack_t to arch-specific bitsRich Felker1-6/+6
in the previous changes, I missed the fact that both the prototype of the sigaltstack function and the definition of ucontext_t depend on stack_t.
2014-03-18move signal.h definition of stack_t to arch-specific bitsRich Felker1-0/+6
it's different at least on mips. mips version will be fixed in a separate commit to show the change.
2014-03-11move struct semid_ds to from shared sys/sem.h to bitsRich Felker1-0/+16
the definition was found to be incorrect at least for powerpc, and fixing this cleanly requires making the definition arch-specific. this will allow cleaning up the definition for other archs to make it more specific, and reversing some of the ugliness (time_t hacks) introduced with the x32 port. this first commit simply copies the existing definition to each arch without any changes. this is intentional, to make it easier to review changes made on a per-arch basis.
2014-02-23sys/shm.h: move arch specific structs to bits/rofl0r1-0/+11
2014-01-08add IUTF8 to termios.h on archs that were missing itRich Felker1-0/+1
2014-01-08fix namespace violations in termios.h, at least mostlyRich Felker1-8/+7
the fix should be complete on archs that use the generic definitions (i386, arm, x86_64, microblaze), but mips and powerpc have not been checked thoroughly and may need more fixes.
2013-11-23add O_TMPFILE flag, new in linux 3.11Szabolcs Nagy1-0/+1
definition in linux: #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY) where __O_TMPFILE and O_DIRECTORY are arch specific
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 10:19:30 +0000