| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
building on commit 97d35a552ec5b6ddf7923dd2f9a8eb973526acea,
__BYTE_ORDER is now available wherever alltypes.h is included. since
reloc.h is only used from src/internal/dynlink.h, it can be assumed
that __BYTE_ORDER is exposed. reloc.h is not permitted to be included
in other contexts, and generally, like most arch headers, lacks
inclusion guards that would allow such usage. the mips64 version
mistakenly included such guards; they are removed for consistency.
|
|
mips32r6 and mips64r6 are actually new isas at both the asm source and
opcode levels (pre-r6 code cannot run on r6) and thus need to be
treated as a new subarch. the following changes are made, some of
which yield code generation improvements for non-r6 targets too:
- add subarch logic in configure script and reloc.h files for dynamic
linker name.
- suppress use of .set mips2 asm directives (used to allow mips2
atomic instructions on baseline mips1 builds; the kernel has to
emulate them on mips1) except when actually needed. they cause wrong
instruction encodings on r6, and pessimize inlining on at least some
compilers.
- only hard-code sync instruction encoding on mips1.
- use "ZC" constraint instead of "m" constraint for llsc memory
operands on r6, where the ll/sc instructions no longer accept full
16-bit offsets.
- only hard-code rdhwr instruction encoding with .word on targets
(pre-r2) where it may need trap-and-emulate by the kernel.
otherwise, just use the instruction mnemonic, and allow an arbitrary
destination register to be used.
|
|
GDB is looking for a pointer to the ldso debug info in the data of the
..rld_map section.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
|
|
|
|
this overhaul further reduces the amount of arch-specific code needed
by the dynamic linker and removes a number of assumptions, including:
- that symbolic function references inside libc are bound at link time
via the linker option -Bsymbolic-functions.
- that libc functions used by the dynamic linker do not require
access to data symbols.
- that static/internal function calls and data accesses can be made
without performing any relocations, or that arch-specific startup
code handled any such relocations needed.
removing these assumptions paves the way for allowing libc.so itself
to be built with stack protector (among other things), and is achieved
by a three-stage bootstrap process:
1. relative relocations are processed with a flat function.
2. symbolic relocations are processed with no external calls/data.
3. main program and dependency libs are processed with a
fully-functional libc/ldso.
reduction in arch-specific code is achived through the following:
- crt_arch.h, used for generating crt1.o, now provides the entry point
for the dynamic linker too.
- asm is no longer responsible for skipping the beginning of argv[]
when ldso is invoked as a command.
- the functionality previously provided by __reloc_self for heavily
GOT-dependent RISC archs is now the arch-agnostic stage-1.
- arch-specific relocation type codes are mapped directly as macros
rather than via an inline translation function/switch statement.
|
|
this issue caused the address of functions in shared libraries to
resolve to their PLT thunks in the main program rather than their
correct addresses. it was observed causing crashes, though the
mechanism of the crash was not thoroughly investigated. since the
issue is very subtle, it calls for some explanation:
on all well-behaved archs, GOT entries that belong to the PLT use a
special relocation type, typically called JMP_SLOT, so that the
dynamic linker can avoid having the jump destinations for the PLT
resolve to PLT thunks themselves (they also provide a definition for
the symbol, which must be used whenever the address of the function is
taken so that all DSOs see the same address).
however, the traditional mips PIC ABI lacked such a JMP_SLOT
relocation type, presumably because, due to the way PIC works, the
address of the PLT thunk was never needed and could always be ignored.
prior to commit adf94c19666e687a728bbf398f9a88ea4ea19996, the mips
version of reloc.h contained a hack that caused all symbol lookups to
be treated like JMP_SLOT, inhibiting undefined symbols from ever being
used to resolve symbolic relocations. this hack goes all the way back
to commit babf820180368f00742ec65b2050a82380d7c542, when the mips
dynamic linker was first made usable.
during the recent refactoring to eliminate arch-specific relocation
processing (commit adf94c19666e687a728bbf398f9a88ea4ea19996), this
hack was overlooked and no equivalent functionality was provided in
the new code.
fixing the problem is not as simple as adding back an equivalent hack,
since there is now also a "non-PIC ABI" that can be used for the main
executable, which actually does use a PLT. the closest thing to
official documentation I could find for this ABI is nonpic.txt,
attached to Message-ID: 20080701202236.GA1534@caradoc.them.org, which
can be found in the gcc mailing list archives and elsewhere. per this
document, undefined symbols corresponding to PLT thunks have the
STO_MIPS_PLT bit set in the symbol's st_other field. thus, I have
added an arch-specific rule for mips, applied at the find_sym level
rather than the relocation level, to reject undefined symbols with the
STO_MIPS_PLT bit clear.
the previous hack of treating all mips relocations as JMP_SLOT-like,
rather than rejecting the unwanted symbols in find_sym, probably also
caused dlsym to wrongly return PLT thunks in place of the correct
address of a function under at least some conditions. this should now
be fixed, at least for global-scope symbol lookups.
|
|
this was one of the main instances of ugly code duplication: all archs
use basically the same types of relocations, but roughly equivalent
logic was duplicated for each arch to account for the different naming
and numbering of relocation types and variation in whether REL or RELA
records are used.
as an added bonus, both REL and RELA are now supported on all archs,
regardless of which is used by the standard toolchain.
|
|
the immediate motivation is supporting TLSDESC relocations which
require allocation and thus may fail (unless we pre-allocate), but
this mechanism should also be used for throwing an error on
unsupported or invalid relocation types, and perhaps in certain cases,
for reporting when a relocation is not satisfiable.
|
|
Userspace emulated floating-point (gcc -msoft-float) is not compatible
with the default mips abi (assumes an FPU or in kernel emulation of it).
Soft vs hard float abi should not be mixed, __mips_soft_float is checked
in musl's configure script and there is no runtime check. The -sf subarch
does not save/restore floating-point registers in setjmp/longjmp and only
provides dummy fenv implementation.
|
|
PAGE_SIZE was hardcoded to 4096, which is historically what most
systems use, but on several archs it is a kernel config parameter,
user space can only know it at execution time from the aux vector.
PAGE_SIZE and PAGESIZE are not defined on archs where page size is
a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE)
to query it. Internally libc code defines PAGE_SIZE to libc.page_size,
which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink
as well. (Note that libc.page_size can be accessed without GOT, ie.
before relocations are done)
Some fpathconf settings are hardcoded to 4096, these should be actually
queried from the filesystem using statfs.
|
|
prior to this change, using a non-default syslibdir was impractical on
systems where the ordinary library paths contain musl-incompatible
library files. the file containing search paths was always taken from
/etc, which would either correspond to a system-wide musl
installation, or fail to exist at all, resulting in searching of the
default library path.
the new search strategy is safe even for suid programs because the
pathname used comes from the PT_INTERP header of the program being
run, rather than any external input.
as part of this change, I have also begun differentiating the names of
arch variants that differ by endianness or floating point calling
convention. the corresponding changes in the build system and and gcc
wrapper script (to use an alternate dynamic linker name) for these
configurations have not yet been made.
|
|
despite documentation that makes it sound a lot different, the only
ABI-constraint difference between TLS variants II and I seems to be
that variant II stores the initial TLS segment immediately below the
thread pointer (i.e. the thread pointer points to the end of it) and
variant I stores the initial TLS segment above the thread pointer,
requiring the thread descriptor to be stored below. the actual value
stored in the thread pointer register also tends to have per-arch
random offsets applied to it for silly micro-optimization purposes.
with these changes applied, TLS should be basically working on all
supported archs except microblaze. I'm still working on getting the
necessary information and a working toolchain that can build TLS
binaries for microblaze, but in theory, static-linked programs with
TLS and dynamic-linked programs where only the main executable uses
TLS should already work on microblaze.
alignment constraints have not yet been heavily tested, so it's
possible that this code does not always align TLS segments correctly
on archs that need TLS variant I.
|
|
currently, only i386 is tested. x86_64 and arm should probably work.
the necessary relocation types for mips and microblaze have not been
added because I don't understand how they're supposed to work, and I'm
not even sure if it's defined yet on microblaze. I may be able to
reverse engineer the requirements out of gcc/binutils output.
|
|
|
|
not heavily tested, but the basics are working. the basic concept is
that the dynamic linker entry point code invokes a pure-PIC (no global
accesses) C function in reloc.h to perform the early GOT relocations
needed to make the dynamic linker itself functional, then invokes
__dynlink like on other archs. since mips uses some ugly arch-specific
hacks to optimize relocating the GOT (rather than just using the
normal DT_REL[A] tables like on other archs), the dynamic linker has
been modified slightly to support calling arch-specific relocation
code in reloc.h.
most of the actual mips-specific behavior was developed by reading the
output of readelf on libc.so and simple executable files. i could not
find good reference information on which relocation types need to be
supported or their semantics, so it's possible that some legitimate
usage cases will not work yet.
|
|
basically, this version of the code was obtained by starting with
rdp's work from his ellcc source tree, adapting it to musl's build
system and coding style, auditing the bits headers for discrepencies
with kernel definitions or glibc/LSB ABI or large file issues, fixing
up incompatibility with the old binutils from aboriginal linux, and
adding some new special cases to deal with the oddities of sigaction
and pipe syscall interfaces on mips.
at present, minimal test programs work, but some interfaces are broken
or missing. threaded programs probably will not link.
|
