| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
added in linux commit 80f60e509a03ff9ff2bdbf9cd1e935c6360b8bd9
|
|
missing syscalls got allocated on microblaze.
|
|
commit 06fbefd10046a0fae7e588b7c6d25fb51811b931 (first included in
release 1.1.17) introduced this regression.
patch by Adrian Bunk. it fixes the regression in all cases, but
spuriously prevents use of the clz instruction on very old compiler
versions that don't define __ARM_ARCH. this may be fixed in a more
general way at some point in the future. it also omits thumb1 logic
since building as thumb1 code is currently not supported.
|
|
MAP_{NORESERVE,LOCKED} have different values on powerpc than in generic.
|
|
most of the found naming differences don't matter to musl, because
internally it unifies the syscall names that vary across targets,
but for external code the names should match the kernel uapi.
aarch64:
__NR_fstatat is called __NR_newfstatat in linux.
__NR_or1k_atomic got mistakenly copied from or1k.
arm:
__NR_arm_sync_file_range is an alias for __NR_sync_file_range2
__NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux,
the old non-arm name is kept too, it should not cause issues.
(powerpc has similar nonstandard fadvise and it uses the
normal name.)
i386:
__NR_madvise1 was removed from linux in commit
303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11
microblaze:
__NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite
had different name in linux.
mips:
__NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select
had different name in linux.
mipsn32:
__NR_fstatat is called __NR_newfstatat in linux.
or1k:
__NR__llseek is called __NR_llseek in linux.
the old name is kept too because that's the name musl uses
internally.
powerpc:
__NR_{get,set}res{gid,uid}32 was never present in powerpc linux.
__NR_timerfd was briefly defined in linux but then got renamed.
|
|
Glibc renamed the linux uapi HWCAP_* macros to HWCAP_ARM_*
so have both variants in case some code depends on it.
(The HWCAP2_ macros are not defined in glibc currently so those
only have the linux uapi variant.)
|
|
counts leading zero bits of a 64bit int, undefined on zero input.
(has nothing to do with atomics, added to atomic.h so target specific
helper functions are together.)
there is a logarithmic generic implementation and another in terms of
a 32bit a_clz_32 on targets where that's available.
|
|
aligned with linux arch/s390/include/asm/elf.h
(these macros should be exported into uapi, but they are not)
|
|
it is defined in linux asm/sockios.h since commit
ae40eb1ef30ab4120bd3c8b7e3da99ee53d27a23 (linux v2.6.22)
but was missing from musl by accident.
in musl the sockios macros are exposed in sys/ioctl.h together
with other ioctl requests instead of in sys/socket.h because of
namespace rules. (glibc has them in sys/socket.h under _GNU_SOURCE.)
|
|
|
|
Due to a missing ":" in an asm() statement, the "memory" clobber is
considered by gcc as an input operand and not a clobber, which causes a
build failure.
|
|
|
|
at one point, clang reportedly failed to support the asm register
constraints needed for inline syscalls. versions of clang that old
have much bigger problems that preclude using them to compile musl
libc.
|
|
mips64 requires 'struct stat' conversion due to incorrect 32-bit
fields where time_t should be in the kernel version of the structure.
syscall_arch.h already performed the correct translation for stat,
fstat, and lstat syscalls, but omitted special handling for fstatat.
|
|
This structure was missed when creating the s390x port.
This is based on the report and patch from William Pitcock, but with a
modified structure defintion to more closely match the kernel's
definition.
|
|
Including sys/procfs.h complains unknown type name 'fpreg_t' in
bits/user.h. fpreg_t in bits/signal.h and elf_fpreg_t in bits/user.h
are practically the same.
per_struct is never used, even conflicts with kernel header
asm/ptrace.h
|
|
the 32-bit pc-relative address for stage 2 of dynamic linker entry was
wrongly loaded with a zero-extending load instead of sign-extending
load, resulting in an invalid jump if the offset happened to be
negative, which depends on the linker's ordering of text sections.
|
|
the ABI for arm was silently changed at some point to allow page sizes
other than 4k; traditional binaries built with only 4k-aligned offsets
between load segments cannot run on such systems, but newer binutils
versions use 64k offset alignment.
while larger page size is undesirable for various reasons, users have
encountered hardware and/or kernels that lock the page size to a
larger value, so follow the new ABI and allow it to vary.
|
|
x32 has another gratuitous difference to all other archs:
it passes an array of 64bit values to __tls_get_addr().
usually it is an array of size_t.
|
|
when _GNU_SOURCE is defined, which is always the case when compiling
c++ with gcc, these macros for the the indices in gregset_t are
exposed and likely to clash with applications. by using enum constants
rather than macros defined with integer literals, we can make the
clash slightly less likely to break software. the macros are still
defined in case anything checks for them with #ifdef, but they're
defined to expand to themselves so that non-file-scope (e.g.
namespaced) identifiers by the same names still work.
for the sake of avoiding mistakes, the changes were generated with sed
via the command:
sed -i -e 's/#define *\(REG_[A-Z_0-9]\{1,\}\) *\([0-9]\{1,\}\)'\
'/enum { \1 = \2 };\n#define \1 \1/' \
arch/i386/bits/signal.h arch/x86_64/bits/signal.h arch/x32/bits/signal.h
|
|
see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a
and linux Documentation/x86/protection-keys.txt
|
|
three problems are addressed:
- use of pc arithmetic, which was difficult if not impossible to make
correct in thumb mode on all models, so that relative rather than
absolute pointers to the backends could be used. this was designed
back when there was no coherent model for the early stages of the
dynamic linker before relocations, and is no longer necessary.
- assumption that data (the relative pointers to the backends) can be
accessed at a constant displacement from the code. this will not be
possible on future fdpic subarchs (for cortex-m), so move
responsibility for loading the backend code address to the caller.
- hard-coded arm opcodes using the .word directive. instead, use the
.arch directive to work around the assembler's refusal to assemble
instructions not available (or in some cases, available but just
considered deprecated) in the target isa level. the obscure v6t2
arch is used for v6 code so as to (1) allow generation of thumb2
output if -mthumb is active, and (2) avoid warnings/errors for mcr
barriers that clang would produce if we just set arch to v7-a.
in addition, the __aeabi_read_tp function is moved out of the inner
workings and implemented as an asm wrapper around a C function, so
that asm code does not need to read global data. the asm wrapper
serves to satisfy the ABI calling convention requirements for this
function.
|
|
|
|
|
|
this has been slated for removal for a long time. there is
fundamentally no way to implement stdarg without compiler assistance;
any attempt to do so has serious undefined behavior; its working
depends not just (as a common misconception goes) on ABI, but also on
assumptions about compiler code generation internal to a translation
unit, which is not subject to external ABI constraints.
|
|
gdb can only backtrace/unwind across signal handlers if it recognizes
the sa_restorer trampoline. for x86_64, gdb first attempts to
determine the symbol name for the function in which the program
counter resides and match it against "__restore_rt". if no name can be
found (e.g. in the case of a stripped binary), the exact instruction
sequence is matched instead.
when matching the function name, however, gdb's unwind code wrongly
considers the interval [sym,sym+size] rather than [sym,sym+size).
thus, if __restore_rt begins immediately after another function, gdb
wrongly identifies pc as lying within the previous adjacent function.
this patch adds a nop before __restore_rt to preclude that
possibility. it also removes the symbol name __restore and replaces it
with a macro since the stability of whether gdb identifies the
function as __restore_rt or __restore is not clear.
for the no-symbols case, the instruction sequence is changed to use
%rax rather than %eax to match what gdb expects.
based on patch by Szabolcs Nagy, with extended description and
corresponding x32 changes added.
|
|
|
|
alpha and s390x gratuitously use 64-bit entries (wasting 2x space and
cache utilization) despite the values always being 32-bit.
based on patch by Bobby Bingham, with changes suggested by Alexander
Monakov to use the public Elf_Symndx type from link.h (and make it
properly variable by arch) rather than adding new internal
infrastructure for handling the type.
|
|
aarch64, arm, mips, mips64, mipsn32, powerpc, powerpc64 and sh have
cpu feature bits defined in linux for AT_HWCAP auxv entry, so expose
those in sys/auxv.h
it seems the mips hwcaps were never exposed to userspace neither
by linux nor by glibc, but that's most likely an oversight.
|
|
sh was updated in linux commit 74bdaa611fa69368fb4032ad437af073d31116bd
to have numbers for new syscalls.
|
|
the numbers were wrong in musl, but they were also wrong in the kernel
and got fixed in v4.8 commit 3ebfd81f7fb3e81a754e37283b7f38c62244641a
|
|
userfaultfd, membarrier and mlock2 syscalls got wired up in linux
commit fbce3befd60d40639bf3c6b60f7477b2f988f92d
|
|
despite sh not generally using register-pair alignment for 64-bit
syscall arguments, there are arch-specific versions of the syscall
entry points for pread and pwrite which include a dummy argument for
alignment before the 64-bit offset argument.
|
|
revert commit 8c316e9e49d37ad92c2e7493e16166a2afca419f. it was wrong
and does not match how the kernel API works.
|
|
It's identical to the generic version, after evaluating the endian
preprocessor checks in the generic version.
|
|
commit befa5866ee30d09c0c96e88af2eabff5911342ea performed this change
for struct definitions that did not also involve typedef, but omitted
the latter.
|
|
placing the opening brace on the same line as the struct keyword/tag
is the style I prefer and seems to be the prevailing practice in more
recent additions.
these changes were generated by the command:
find include/ arch/*/bits -name '*.h' \
-exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} +
and subsequently checked by hand to ensure that the regex did not pick
up any false positives.
|
|
with this change, all three files are identical.
|
|
it seems it was a typo.
|
|
these were incorrectly using the generic definitions.
|
|
same changes to the defined macros as in powerpc and generic bits.
|
|
same changes as in the generic header.
and BOTHER and IBSHIFT were removed (present in linux uapi but not
in glibc) and TIOCSER_TEMT was added (present in glibc).
|
|
add EXTA, EXTB, CIBAUD, CMSPAR, XCASE macros and hide them as well as
CBAUD, ECHOCTL, ECHOPRT, ECHOKE, FLUSHO, PENDIN in standard mode.
the new macros are both in glibc termios.h and in linux asm/termbits.h,
the later also contains IBSHIFT and BOTHER, those were not added.
these are not standard macros, but some of them are in the reserved
namespace so could be exposed, the ones which are not reserved are
CIBAUD, CMSPAR and XCASE (which was removed in issue 6), the rest
got hidden to be consistent with glibc.
|
|
arm ioctl.h is the same as the generic one except this macro,
so a workaround solution is used to avoid another ioctl.h copy.
|
|
musl does not define these on other targets either.
|
|
it seems it was a typo.
|
|
TIOCM_ macros were wrongly using the asm-generic/termios.h definitions
instead of the mips specific ones from asm/termios.h
|
|
mips and powerpc use their own asm/ioctls.h, not the asm-generic/ioctls.h
and they lack termiox macros that are available on other targets.
see kernel commit 1d65b4a088de407e99714fdc27862449db04fb5c
|
|
these are defined in linux asm/ioctls.h.
(powerpc64 and powerpc bits/ioctl.h are now identical)
|
|
glibc ioctl.h has it too.
|
