Age | Commit message (Collapse) | Author | Files | Lines |
|
these structures can now be defined generically in terms of endianness
and long size. previously, the 32-bit archs all shared a common
definition from the generic bits header, and each 64-bit arch had to
repeat the 64-bit version, with endian conditionals if the arch had
variants of each endianness.
I would prefer getting rid of the preprocessor conditionals for
padding and instead using unnamed bitfield members, like commit
9b2921bea1d5017832e1b45d1fd64220047a9802 did for struct timespec.
however, at present sendmsg, recvmsg, and recvmmsg need access to the
padding members by name to zero them. this could perhaps be cleaned up
in the future.
|
|
being that it contains pointers and (from the kernel perspective,
which is wrong) size_t members, x32 uses the 32-bit version of the
structure, not a half-32-bit, half-64-bit layout like we had here. the
x86_64 definition was inadvertently copied when x32 was first added.
unlike errors in the opposite direction (missing padding), this error
was not easily detected breakage, because the layout of the commonly
used initial subset of members still matched. breakage could only be
observed in the presence of control messages or flags.
|
|
|
|
this is analogous to commit 40aa18d55ab763e69ad16d0cf1cebea708ffde47.
so far, there are not any actual time64 versions of the rusage
syscalls (getrusage and wait4) and might never be. however, the
existing x32 ones behave the way time64 versions would if they
existed: using 64-bit slots in place of all longs.
presently, wait4 and getrusage are broken on x32, storing the timevals
correctly but messing up everything else due to the long/kernel-long
mismatch. this would be a huge buffer overflow if not for the 16
reserved slots we left long ago, which suffice to prevent 14
double-sized longs from overflowing into unrelated memory. this commit
will make it possible to fix them.
|
|
this is to match the kernel and glibc interfaces. here, struct pt_regs
is an incomplete type, but that's harmless, and if it's completed by
inclusion of another header then members of the struct pointed to by
the regs member can be accessed directly without going through a cast
or intermediate pointer object.
|
|
the userspace ucontext API has this as an array rather than a
structure.
commit 3c59a868956636bc8adafb1b168d090897692532 fixed the
corresponding mistake for vrregset_t, namely that the original
powerpc64 port used a mix of types from 32-bit powerpc and powerpc64
rather than matching the 64-bit types.
|
|
policy has long been that these definitions are purely a function of
whether long/pointer is 32- or 64-bit, and that they are not allowed
to vary per-arch. move the definition to the shared alltypes.h.in
fragment, using integer constant expressions in terms of sizeof to
vary the array dimensions appropriately. I'm not sure whether this is
more or less ugly than using preprocessor conditionals and two sets of
definitions here, but either way is a lot less ugly than repeating the
same thing for every arch.
|
|
LLONG_MAX is uniform for all archs we support and plenty of header and
code level logic assumes it is, so it does not make sense for limits.h
bits mechanism to pretend it's variable.
LONG_BIT can be defined in terms of LONG_MAX; there's no reason to put
it in bits.
by moving LONG_MAX definition to __LONG_MAX in alltypes.h and moving
LLONG_MAX out of bits, there are now no plain-C limits that are
defined in the bits header, so the bits header only needs to be
included in the POSIX or extended profiles. this allows the feature
test macro logic to be removed from the bits header, facilitating a
long-term goal of getting such logic out of bits.
having __LONG_MAX in alltypes.h will allow further generalization of
headers.
archs without a constant PAGESIZE no longer need bits/limits.h at all.
|
|
building on commit 97d35a552ec5b6ddf7923dd2f9a8eb973526acea,
__BYTE_ORDER is now available wherever alltypes.h is included. since
reloc.h is only used from src/internal/dynlink.h, it can be assumed
that __BYTE_ORDER is exposed. reloc.h is not permitted to be included
in other contexts, and generally, like most arch headers, lacks
inclusion guards that would allow such usage. the mips64 version
mistakenly included such guards; they are removed for consistency.
|
|
building on commit 97d35a552ec5b6ddf7923dd2f9a8eb973526acea,
__BYTE_ORDER is now available wherever alltypes.h is included.
endian.h should not be used since, in the future, it will expose
identifiers that are not in the reserved namespace for the headers
which were previously using it.
|
|
this change is motivated by the intersection of several factors.
presently, despite being a nonstandard header, endian.h is exposing
the unprefixed byte order macros and functions only if _BSD_SOURCE or
_GNU_SOURCE is defined. this is to accommodate use of endian.h from
other headers, including bits headers, which need to define structure
layout in terms of endianness. with time64 switch-over, even more
headers will need to do this.
at the same time, the resolution of Austin Group issue 162 makes
endian.h a standard header for POSIX-future, requiring that it expose
the unprefixed macros and the functions even in standards-conforming
profiles. changes to meet this new requirement would break existing
internal usage of endian.h by causing it to violate namespace where
it's used.
instead, have the arch's alltypes.h define __BYTE_ORDER, either as a
fixed constant or depending on the right arch-specific predefined
macros for determining endianness. explicit literals 1234 and 4321 are
used instead of __LITTLE_ENDIAN and __BIG_ENDIAN so that there's no
danger of getting the wrong result if a macro is undefined and
implicitly evaluates to 0 at the preprocessor level.
the powerpc (32-bit) bits/endian.h being removed had logic for varying
endianness, but our powerpc arch has never supported that and has
always been big-endian-only. this logic is not carried over to the new
__BYTE_ORDER definition in alltypes.h.
|
|
now that commit f7f1079796abc6f97c69521d2334e9c7d3945dd8 removed the
legacy i386 conditional definition, va_list is in no way
arch-specific, and has no reason to be in the future. move it to the
shared part of alltypes.h.in
|
|
commit ffaaa6d230512f3a7f3d040b943517728f3dc3cf removed the
corresponding stdarg.h support for compilers without va_list builtins,
but failed to remove the alternate type definition, leaving incorrect
va_list definitions in place with compilers that don't define __GNUC__
with a value >= 3.
|
|
commit ab3eb89a8b83353cdaab12ed017a67a7730f90e9 removed it as part of
correcting the mcontext_t definition, but there is still code using
struct sigcontext and expecting the member names present in it, most
notably libgcc_eh. almost all such usage is incorrect, but bring back
struct sigcontext at least for now so as not to introduce regressions.
|
|
in order for sys/procfs.h (provided by sys/user.h) to be useful, it
needs to match the API its consumers (gdb, etc.) expect, including the
member names established by glibc.
this partly reverts commit 29e8737f81ccc9fbadcf61a75318aa3d0516aafa,
which partly reverted d493206de7df4db07ad34f24701539ba0a6ed38c,
eliminating struct user_fpregs_struct which seems to have had no
precedent and using union __riscv_mc_fp_state for elf_fpregset_t. this
requires indirect inclusion of signal.h to make union
__riscv_mc_fp_state visible, but being that these are nonstandard
"junk" headers with no official restrictions on what they can pull in,
that's no big deal.
split off and expanded from patch by Khem Raj.
|
|
the top-level mcontext_t member names were namespace-violating in
standards profiles before, and nested-level member names (some of them
single-letter) were egregiously bad namespace impositions even in
non-strict profiles. moreover, they mismatched those used in the
public API first defined in glibc, breaking any code making use of
them.
unlike most archs, the public API used in glibc for riscv mcontext_t
members was designed to be namespace-safe, so we can and should expose
the members regardless of feature test macros. only the typedefs for
greg_t, gregset_t, and fpregset_t need to be protected behind FTMs.
the struct tags for mcontext_t and ucontext_t are also changed. for
mcontext_t this is necessary to make the common definition across
profiles namespace-safe. for ucontext_t, it's just a matter of
matching the tag from the glibc-defined API.
these changes are split off and expanded from a patch by Khem Raj.
|
|
analogous to commit ddc7c4f936c7a90781072f10dbaa122007e939d0 for
mips64 and n32, remove the hack to load the syscall number into $2 via
asm, and use a constraint to let the compiler load it instead.
now, only $4, $5, and $6 are potential input-only registers. $2 is
always input and output, and $7 is both when it's an argument,
otherwise output-only. previously, $7 was treated as an input (with a
"1" constraint matching its output position) even when it was not an
input, which was arguably undefined behavior (asm input from
indeterminate value). this is corrected.
as before, $8, $9, and $10 are conditionally input-output registers
for 5-, 6-, and 7-argument syscalls. their role in input is carrying
in the values that will be stored on the stack for arguments 5-7.
their role in output is carrying back whatever the kernel has
clobbered them with, so that the compiler cannot assume they still
contain the input values.
|
|
mips r6 (an incompatible isa from traditional mips) removes the hi and
lo registers used for mul/div results. older gcc versions accepted
them in the clobber list for asm, but their presence is incorrect and
breaks on later versions.
in the process of fixing this, the clobber list for 32-bit mips
syscalls has been deduplicated via a macro like on mips64 and n32.
|
|
The operand sepcifiers in a_cas and a_cas_p for riscv64 were incorrect:
there's a backwards branch in the routine, so despite tmp being written
at the end of the assembly fragment it cannot be allocated in one of the
input registers because the input values may be needed for another trip
around the loop.
For code that follows the guaranteed forward progress requirements, the
backwards branch is rarely taken: SiFive's hardware only fails a store
conditional on execptional cases (ie, instruction cache misses inside
the loop), and until recently a bug in QEMU allowed back-to-back
store conditionals to succeed. The bug has been fixed in the latest
QEMU release, but it turns out that the fix caused this latent bug in
musl to manifest.
|
|
AT_HWCAP2 flags, see
linux commit 671db581815faf17cbedd7fcbc48823a247d90b1
arm64: Expose DC CVADP to userspace
linux commit 06a916feca2b262ab0c1a2aeb68882f4b1108a07
arm64: Expose SVE2 features for userspace
|
|
new mount api syscalls were added, same numers on all targets, see
linux commit a07b20004793d8926f78d63eb5980559f7813404
vfs: syscall: Add open_tree(2) to reference or clone a mount
linux commit 2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae
vfs: syscall: Add move_mount(2) to move mounts around
linux commit 24dcb3d90a1f67fe08c68a004af37df059d74005
vfs: syscall: Add fsopen() to prepare for superblock creation
linux commit ecdab150fddb42fe6a739335257949220033b782
vfs: syscall: Add fsconfig() for configuring and managing a context
linux commit 93766fbd2696c2c4453dd8e1070977e9cd4e6b6d
vfs: syscall: Add fsmount() to create a mount for a superblock
linux commit cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb
vfs: syscall: Add fspick() to select a superblock for reconfiguration
linux commit 9c8ad7a2ff0bfe58f019ec0abc1fb965114dde7d
uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2]
linux commit d8076bdb56af5e5918376cd1573a6b0007fc1a89
uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]
|
|
historically, a number of 32-bit archs used long rather than int for
wchar_t, for no good reason. GCC still uses the historical types, but
clang replaced them all with int, and it seems PCC uses int too.
mismatching the compiler's type for wchar_t is not an option due to
wide string literals.
note that the mismatch does not affect C++ ABI since wchar_t is its
own builtin type/keyword in C++, distinct from both int and long, not
a typedef.
i386 already worked around this by honoring __WCHAR_TYPE__ if defined
by the compiler, and only using the official legacy ABI type if not.
add the same to the other affected archs.
it might make sense at some point to switch to using int as the
default if __WCHAR_TYPE__ is not defined, if the expectations is that
new compilers will treat int as the correct choice, but it's unlikely
that the case where __WCHAR_TYPE__ is undefined will ever be used
anyway. I actually wanted to move the definition of wchar_t to the
top-level shared alltypes.h.in, using __WCHAR_TYPE__ and falling back
to int if not defined, but that can't be done without assuming all
compilers define __WCHAR_TYPE__ thanks to some pathological archs
where the ABI has wchar_t as an unsigned type.
|
|
due to historical accident/sloppiness in glibc, the powerpc,
powerpc64, and sh versions of struct user, defined by sys/user.h, used
struct pt_regs from the kernel asm/ptrace.h for their regs member.
this made it impossible to define the type in an API-compatible manner
without either including asm/ptrace.h like glibc does (contrary to our
policy of not depending on kernel headers), or clashing with
asm/ptrace.h's definition of struct pt_regs if both headers are
included (which is almost always the case in software using
sys/user.h).
for a long time I viewed this problem as having no reasonable fix. I
even explored the possibility of having the powerpc[64] and sh
versions of user.h just include the kernel header (breaking with
policy), but that looked like it might introduce new clashes with
sys/ptrace.h. and it would also bring in a lot of additional cruft
that makes no sense for sys/user.h to expose. glibc goes out of its
way to suppress some of that with #undef, possibly leading to
different problems. this is a rabbit-hole that should be explored no
further.
as it turns out, however, nothing actually uses struct user
sufficiently to care about the type of the regs member; most software
including sys/user.h does not even use struct user at all. so, the
problem can be fixed just by doing away with the insistence on strict
glibc API compatibility for the struct tag of the regs member.
rather than renaming the tag, which might lead to the new name
entering use as API, simply use an untagged structure inside struct
user with the same members/layout as struct pt_regs.
for sh, struct pt_dspregs is just removed entirely since it was not
used.
|
|
d493206de7df4db07ad34f24701539ba0a6ed38c deleted all the content of
user.h, but sys/procfs.h expects this from sys/user.h
threfore we retain the non conflicting parts
|
|
R_PPC_UADDR32 (R_PPC64_UADDR64) has the same meaning as R_PPC_ADDR32
(R_PPC64_ADDR64), except that its address need not be aligned. For
powerpc64, BFD ld(1) will automatically convert between ADDR<->UADDR
relocations when the address is/isn't at its native alignment. This
will happen if, for example, there is a pointer in a packed struct.
gold and lld do not currently generate R_PPC64_UADDR64, but pass
through misaligned R_PPC64_ADDR64 relocations from object files,
possibly relaxing them to misaligned R_PPC64_RELATIVE. In both cases
(relaxed or not) this violates the PSABI, which defines the relevant
field type as "a 64-bit field occupying 8 bytes, the alignment of
which is 8 bytes unless otherwise specified."
All three linkers violate the PSABI on 32-bit powerpc, where the only
difference is that the field is 32 bits wide, aligned to 4 bytes.
Currently musl fails to load executables linked by BFD ld containing
R_PPC64_UADDR64, with the error "unsupported relocation type 43".
This change provides compatibility with BFD ld on powerpc64, and any
static linker on either architecture that starts following the PSABI
more closely.
|
|
the contents conflicted with asm/ptrace.h. glibc does not provide
anything in user.h for riscv, so software cannot be depending on it.
simplified from patch submitted by Baruch Siach.
|
|
Rename user registers struct definitions to avoid conflict with the
asm/ptrace.h kernel header that defines the same structs. Use the
__riscv_mc prefix as glibc does.
|
|
commit f3f96f2daa4d00f0e38489fb465cd0244b531abe added these for the
rest of the archs, but the patch it corresponded to missed riscv64
since riscv64 was not yet upstream at the time. this caused commit
dfc81828f7ab41da08f744c44117a1bb20a05749 to break riscv64 build, due
to a wrong assumption that SYS_statx was unconditionally defined.
|
|
otherwise, 32-bit archs that could otherwise share the generic
bits/ipc.h would need to duplicate the struct ipc_perm definition,
obscuring the fact that it's the same. sysvipc is not widely used and
these headers are not commonly included, so there is no performance
gain to be had by limiting the number of indirectly included files
here.
files with the existing time32 definition of IPC_STAT are added to all
current 32-bit archs now, so that when it's changed the change will
show up as a change rather than addition of a new file where it's less
obvious that the value is changing vs the generic one that was used
before.
|
|
without this, the SIOCGSTAMP and SIOCGSTAMPNS ioctl commands, for
obtaining timestamps, would stop working on pre-5.1 kernels after
time_t is switched to 64-bit and their values are changed to the new
time64 versions.
new code is written such that it's statically unreachable on 64-bit
archs, and on existing 32-bit archs until the macro values are changed
to activate 64-bit time_t.
|
|
without this, the SO_RCVTIMEO and SO_SNDTIMEO socket options would
stop working on pre-5.1 kernels after time_t is switched to 64-bit and
their values are changed to the new time64 versions.
new code is written such that it's statically unreachable on 64-bit
archs, and on existing 32-bit archs until the macro values are changed
to activate 64-bit time_t.
|
|
these differ from generic only in using endian-matched padding with a
short __ipc_perm_seq field in place of the int field in generic. this
is not a documented public interface anyway, and the original intent
was to use int here. some ports just inadvertently slipped in the
kernel short+padding form.
|
|
previously these differed from generic because they needed their own
definitions of IPC_64. now that it's no longer in public header,
they're identical.
|
|
the definition of the IPC_64 macro controls the interface between libc
and the kernel through syscalls; it's not a public API. the meaning is
rather obscure. long ago, Linux's sysvipc *id_ds structures used
16-bit uids/gids and wrong types for a few other fields. this was in
the libc5 era, before glibc. the IPC_64 flag (64 is a misnomer; it's
more like 32) tells the kernel to use the modern[-ish] versions of the
structures.
the definition of IPC_64 has nothing to do with whether the arch is
32- or 64-bit. rather, due to either historical accident or
intentional obnoxiousness, the kernel only accepts and masks off the
0x100 IPC_64 flag conditional on CONFIG_ARCH_WANT_IPC_PARSE_VERSION,
i.e. for archs that want to provide, or that accidentally provided,
both. for archs which don't define this option, no masking is
performed and commands with the 0x100 bit set will fail as invalid. so
ultimately, the definition is just a matter of matching an arbitrary
switch defined per-arch in the kernel.
|
|
|
|
this layout is more common already than the old generic, and should
become even more common in the future with new archs added and with
64-bit time_t on 32-bit archs.
|
|
|
|
some of these were not exact duplicates, but had gratuitously
different naming for padding, or omitted the endian checks because the
arch is fixed-endian.
|
|
this layout is slightly less common than the old generic one, but only
because x86_64 and x32 wrongly (according to comments in the kernel
headers) copied the i386 padding. for future archs, and with 64-bit
time_t on 32-bit archs, the new layout here will become the most
common, and it makes sense to treat it as the generic.
|
|
having preprocessor conditionals on byte order in the bits headers for
fixed-endian archs is confusing at best. remove them.
|
|
|
|
various padding fields in the generic bits/sem.h were defined in terms
of time_t as a cheap hack standing in for "kernel long", to allow x32
to use the generic version of the file. this was a really bad idea, as
it ended up getting copied into lots of arch-specific versions of the
bits file, and is a blocker to changing time_t to 64-bit on 32-bit
archs.
this commit adds an x32-specific version of the header, and changes
padding type back from time_t to long (currently the same type on all
archs but x32) in the generic header and all the others the hack got
copied into.
|
|
|
|
|
|
this layout is more common already than the old generic, and should
become even more common in the future with new archs added and with
64-bit time_t on 32-bit archs.
the duplicate arch-specific copies are not removed yet in this commit,
so as to assist git tooling in copy/rename tracking.
|
|
there are more archs sharing the generic 64-bit version of the struct,
which is uniform and much more reasonable, than sharing the current
"generic" one, and depending on how time64 sysvipc is done for 32-bit
archs, even more may be sharing the "64-bit version" in the future.
so, duplicate the current generic to all archs using it (arm, i386,
m68k, microblaze, or1k) so that the generic can be changed freely.
this is recorded as its own commit mainly as a hint to git tooling, to
assist in copy/move tracking.
|
|
the x32 syscall interfaces treat timespec's tv_nsec member as 64-bit
despite the API type being long and long being 32-bit in the ABI. this
is no problem for syscalls that store timespecs to userspace as
results, but caused uninitialized padding to be misinterpreted as the
high bits in syscalls that take timespecs as input.
since the beginning of the port, we've dealt with this situation with
hacks in syscall_arch.h, and injected between __syscall_cp_c and
__syscall_cp_asm, to special-case the syscall numbers that involve
timespecs as inputs and copy them to a form suitable to pass to the
kernel.
commit 40aa18d55ab763e69ad16d0cf1cebea708ffde47 set the stage for
removal of these hacks by letting us treat the "normal" x32 syscalls
dealing with timespec as if they're x32's "time64" syscalls,
effectively making x32 ax "time64-only 32-bit arch" like riscv32 will
be when it's added. since then, all users of syscalls that x32's
syscall_arch.h had hacks for have been updated to use time64 syscalls,
so the hacks can be removed.
there are still at least a few other timespec-related syscalls broken
on x32, which were overlooked when the x32 hacks were done or added
later. these include at least recvmmsg, adjtimex/clock_adjtime, and
timerfd_settime, and they will be fixed independently later on.
|
|
x32 is odd in that it's the only ILP32 arch/ABI we have where time_t
is 64-bit rather than (32-bit) long, and this has always been
problematic in that it results in struct timespec having unused
padding space, since tv_nsec has type long, which the kernel insists
be zero- or sign-extended (due to negative tv_nsec being invalid, it
doesn't matter which) to match the x86_64 type.
up til now, we've had really ugly hacks in x32/syscall_arch.h to patch
up the timespecs passed to the kernel. but the same requirement to
zero- or sign-extend tv_nsec also applies to all the new time64
syscalls on true 32-bit archs. so let's take advantage of this to
clean things up.
this patch defines all of the time64 syscalls for x32 as aliases for
the existing syscalls by the same name. this establishes the following
invariants:
- if the time64 form is defined, it takes time arguments as 64-bit
objects, and tv_nsec inputs must be zero-/sign-extended to 64-bit.
- if the time64 form is not defined, or if the time64 form is defined
and is not equal to the "plain" form, the plain form takes time
arguments as longs.
this will avoid the need for protocols for archs to define appropriate
types for each family of syscalls, and for the reader of the code to
have to be aware of such type definitions.
in some sense it might be simpler if the plain syscall form were
undefined for x32, so that it would always take longs if defined.
however, a number of these syscalls are used in contexts with a null
time argument, or (e.g. futex) for commands that don't involve time at
all, and having to introduce time64-specific logic to all those call
points does not make sense. thus, while the "plain" forms are kept now
just because they're needed until the affected code is converted over,
they'll also almost surely be kept in the future as well.
|
|
kernel support for x32 was added long after the utimensat syscall was
already available, so having a fallback is just wasted code size.
also, for changes related to time64 support on 32-bit archs, I want to
be able to assume the old futimesat syscall always works with longs,
which is true except for x32. by ensuring that it's not used on x32,
the needed invariant is established.
|
|
now that we have a kstat structure decoupled from the public struct
stat, we can just use the broken kernel structures directly and let
the code in fstatat do the translation.
|