| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
in general, we aim to always include the header that's declaring a
function before defining it so that the compiler can check that
prototypes match.
additionally, the internal syscall.h declares __syscall_ret with a
visibility attribute to improve code generation for shared libc (to
prevent gratuitous GOT-register loads). this declaration should be
visible at the point where __syscall_ret is defined, too, or the
inconsistency could theoretically lead to problems at link-time.
|
|
linux, gcc, etc. all use "sh" as the name for the superh arch. there
was already some inconsistency internally in musl: the dynamic linker
was searching for "ld-musl-sh.path" as its path file despite its own
name being "ld-musl-superh.so.1". there was some sentiment in both
directions as to how to resolve the inconsistency, but overall "sh"
was favored.
|
|
|
|
|
|
|
|
some 32-on-64 archs require that the actual syscall args be long long.
in that case syscall_arch.h can define syscall_arg_t to whatever it needs
and syscall.h picks it up.
all other archs just use long as usual.
|
|
this allows syscall_arch.h to define the macro __scc if special
casting is needed, as is the case for x32, where the actual syscall
arguments are 64bit, but, in case of pointers, would get sign-extended
and thus become invalid.
|
|
when there is unflushed output, ftello (and ftell) compute the logical
stream position as the underlying file descriptor's offset plus an
adjustment for the amount of buffered data. however, this can give the
wrong result for append-mode streams where the unflushed writes should
adjust the logical position to be at the end of the file, as if a seek
to end-of-file takes place before the write.
the solution turns out to be a simple trick: when ftello (indirectly)
calls lseek to determine the current file offset, use SEEK_END instead
of SEEK_CUR if the stream is append-mode and there's unwritten
buffered data.
the ISO C rules regarding switching between reading and writing for a
stream opened in an update mode, along with the POSIX rules regarding
switching "active handles", conveniently leave undefined the
hypothetical usage cases where this fix might lead to observably
incorrect offsets.
the bug being fixed was discovered via the test case for glibc issue
|
|
|
|
this is still experimental and subject to change. for git checkouts,
an attempt is made to record the exact revision to aid in bug reports
and debugging. no version information is recorded in the static libc.a
or binaries it's linked into.
|
|
if a multithreaded program became non-multithreaded (i.e. all other
threads exited) while one thread held an internal lock, the remaining
thread would fail to release the lock. the the program then became
multithreaded again at a later time, any further attempts to obtain
the lock would deadlock permanently.
the underlying cause is that the value of libc.threads_minus_1 at
unlock time might not match the value at lock time. one solution would
be returning a flag to the caller indicating whether the lock was
taken and needs to be unlocked, but there is a simpler solution: using
the lock itself as such a flag.
note that this flag is not needed anyway for correctness; if the lock
is not held, the unlock code is harmless. however, the memory
synchronization properties associated with a_store are costly on some
archs, so it's best to avoid executing the unlock code when it is
unnecessary.
|
|
PAGE_SIZE was hardcoded to 4096, which is historically what most
systems use, but on several archs it is a kernel config parameter,
user space can only know it at execution time from the aux vector.
PAGE_SIZE and PAGESIZE are not defined on archs where page size is
a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE)
to query it. Internally libc code defines PAGE_SIZE to libc.page_size,
which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink
as well. (Note that libc.page_size can be accessed without GOT, ie.
before relocations are done)
Some fpathconf settings are hardcoded to 4096, these should be actually
queried from the filesystem using statfs.
|
|
gcc did not always drop excess precision according to c99 at assignments
before version 4.5 even if -std=c99 was requested which caused badly
broken mathematical functions on i386 when FLT_EVAL_METHOD!=0
but STRICT_ASSIGN was not used consistently and it is worked around for
old compilers with -ffloat-store so it is no longer needed
the new convention is to get the compiler respect c99 semantics and when
excess precision is not harmful use float_t or double_t or to specialize
code using FLT_EVAL_METHOD
|
|
libc.h is only for weak_alias so include it directly where it is used
|
|
|
|
only fma used these macros and the explicit union is clearer
|
|
|
|
new ldshape union, ld128 support is kept, code that used the old
ldshape union was rewritten (IEEEl2bits union of freebsd libm is
not touched yet)
ld80 __fpclassifyl no longer tries to handle invalid representation
|
|
1. the thread result field was reused for storing a kernel timer id,
but would be overwritten if the application code exited or cancelled
the thread.
2. low pointer values were used as the indicator that the timer id is
a kernel timer id rather than a thread id. this is not portable, as
mmap may return low pointers on some conditions. instead, use the fact
that pointers must be aligned and kernel timer ids must be
non-negative to map pointers into the negative integer space.
3. signals were not blocked until after the timer thread started, so a
race condition could allow a signal handler to run in the timer thread
when it's not supposed to exist. this is mainly problematic if the
calling thread was the only thread where the signal was unblocked and
the signal handler assumes it runs in that thread.
|
|
I intend to add more Linux workarounds that depend on using these
pathnames, and some of them will be in "syscall" functions that, from
an anti-bloat standpoint, should not depend on the whole snprintf
framework.
|
|
the arch-specific bits/alltypes.h.sh has been replaced with a generic
alltypes.h.in and minimal arch-specific bits/alltypes.h.in.
this commit is intended to have no functional changes except:
- exposing additional symbols that POSIX allows but does not require
- changing the C++ name mangling for some types
- fixing the signedness of blksize_t on powerpc (POSIX requires signed)
- fixing the limit macros for sig_atomic_t on x86_64
- making dev_t an unsigned type (ABI matching goal, and more logical)
in addition, some types that were wrongly defined with long on 32-bit
archs were changed to int, and vice versa; this change is
non-functional except for the possibility of making pointer types
mismatch, and only affects programs that were using them incorrectly,
and only at build-time, not runtime.
the following changes were made in the interest of moving
non-arch-specific types out of the alltypes system and into the
headers they're associated with, and also will tend to improve
application compatibility:
- netdb.h now includes netinet/in.h (for socklen_t and uint32_t)
- netinet/in.h now includes sys/socket.h and inttypes.h
- sys/resource.h now includes sys/time.h (for struct timeval)
- sys/wait.h now includes signal.h (for siginfo_t)
- langinfo.h now includes nl_types.h (for nl_item)
for the types in stdint.h:
- types which are of no interest to other headers were moved out of
the alltypes system.
- fast types for 8- and 64-bit are hard-coded (at least for now); only
the 16- and 32-bit ones have reason to vary by arch.
and the following types have been changed for C++ ABI purposes;
- mbstate_t now has a struct tag, __mbstate_t
- FILE's struct tag has been changed to _IO_FILE
- DIR's struct tag has been changed to __dirstream
- locale_t's struct tag has been changed to __locale_struct
- pthread_t is defined as unsigned long in C++ mode only
- fpos_t now has a struct tag, _G_fpos64_t
- fsid_t's struct tag has been changed to __fsid_t
- idtype_t has been made an enum type (also required by POSIX)
- nl_catd has been changed from long to void *
- siginfo_t's struct tag has been removed
- sigset_t's has been given a struct tag, __sigset_t
- stack_t has been given a struct tag, sigaltstack
- suseconds_t has been changed to long on 32-bit archs
- [u]intptr_t have been changed from long to int rank on 32-bit archs
- dev_t has been made unsigned
summary of tests that have been performed against these changes:
- nsz's libc-test (diff -u before and after)
- C++ ABI check symbol dump (diff -u before, after, glibc)
- grepped for __NEED, made sure types needed are still in alltypes
- built gcc 3.4.6
|
|
modern (4.7.x and later) gcc uses init/fini arrays, rather than the
legacy _init/_fini function pasting and crtbegin/crtend ctors/dtors
system, on most or all archs. some archs had already switched a long
time ago. without following this change, global ctors/dtors will cease
to work under musl when building with new gcc versions.
the most surprising part of this patch is that it actually reduces the
size of the init code, for both static and shared libc. this is
achieved by (1) unifying the handling main program and shared
libraries in the dynamic linker, and (2) eliminating the
glibc-inspired rube goldberg machine for passing around init and fini
function pointers. to clarify, some background:
the function signature for __libc_start_main was based on glibc, as
part of the original goal of being able to run some glibc-linked
binaries. it worked by having the crt1 code, which is linked into
every application, static or dynamic, obtain and pass pointers to the
init and fini functions, which __libc_start_main is then responsible
for using and recording for later use, as necessary. however, in
neither the static-linked nor dynamic-linked case do we actually need
crt1.o's help. with dynamic linking, all the pointers are available in
the _DYNAMIC block. with static linking, it's safe to simply access
the _init/_fini and __init_array_start, etc. symbols directly.
obviously changing the __libc_start_main function signature in an
incompatible way would break both old musl-linked programs and
glibc-linked programs, so let's not do that. instead, the function can
just ignore the information it doesn't need. new archs need not even
provide the useless args in their versions of crt1.o. existing archs
should continue to provide it as long as there is an interest in
having newly-linked applications be able to run on old versions of
musl; at some point in the future, this support can be removed.
|
|
for 0-argument syscalls (1 argument to the macro, the syscall number),
the __SYSCALL_NARGS_X macro's ... argument was not satisfied. newer
compilers seem to care about this.
|
|
|
|
the shgetc api, used internally in scanf and int/float scanning code
to handle field width limiting and pushback, was designed assuming
that pushback could be achieved via a simple decrement on the file
buffer pointer. this only worked by chance for regular FILE streams,
due to the linux readv bug workaround in __stdio_read which moves the
last requested byte through the buffer rather than directly back to
the caller. for unbuffered streams and streams not using __stdio_read
but some other underlying read function, the first character read
could be completely lost, and replaced by whatever junk happened to be
in the unget buffer.
to fix this, simply have shgetc, when it performs an underlying read
operation on the stream, store the character read at the -1 offset
from the read buffer pointer. this is valid even for unbuffered
streams, as they have an unget buffer located just below the start of
the zero-length buffer. the check to avoid storing the character when
it is already there is to handle the possibility of read-only buffers.
no application-exposed FILE types are allowed to use read-only
buffers, but sscanf and strto* may use them internally when calling
functions which use the shgetc api.
|
|
there are several reasons for this change. one is getting rid of the
repetition of the syscall signature all over the place. another is
sharing the constant masks without costly GOT accesses in PIC.
the main motivation, however, is accurately representing whether we
want to block signals that might be handled by the application, or all
signals.
|
|
this is a bit ugly, and the motivation for supporting it is
questionable. however the main factors were:
1. it will be useful to have this for certain internal purposes
anyway -- things like syslog.
2. applications can just save argv[0] in main, but it's hard to fix
non-portable library code that's depending on being able to get the
invocation name without the main application's help.
|
|
this function is mainly (purely?) for obtaining stack address
information, but we also provide the detach state since it's easy to
do anyway.
|
|
the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.
note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.
|
|
patch by Jens Gustedt.
previously, the intended policy was to use __environ in code that must
conform to the ISO C namespace requirements, and environ elsewhere.
this policy was not followed in practice anyway, making things
confusing. on top of that, Jens reported that certain combinations of
link-time optimization options were breaking with the inconsistent
references; this seems to be a compiler or linker bug, but having it
go away is a nice side effect of the changes made here.
|
|
this should generate faster and smaller code, especially with inline
syscalls. the conditional with cnt is ugly, but thankfully cnt is
always a constant anyway so it gets evaluated at compile time. it may
be preferable to make separate __wake and __wakeall macros without a
count argument.
priv flag is not used yet; private futex support still needs to be
done at some point in the future.
|
|
|
|
|
|
|
|
|
|
the volatile hack in STRICT_ASSIGN is only needed if
assignment is not respected and excess precision is kept.
gcc -fexcess-precision=standard and -ffloat-store both
respect assignment and musl use these flags by default.
i kept the macro for now so the workaround may be used
for bad compilers in the future.
|
|
|
|
|
|
|
|
linux's sched_* syscalls actually implement the TPS (thread
scheduling) functionality, not the PS (process scheduling)
functionality which the sched_* functions are supposed to have.
omitting support for the PS option (and having the sched_* interfaces
fail with ENOSYS rather than omitting them, since some broken software
assumes they exist) seems to be the only conforming way to do this on
linux.
|
|
this function does not obey the normal calling convention; like a
syscall instruction, it's expected not to clobber any registers except
the return value. clobbering edx could break callers that were reusing
the value cached in edx after the syscall returns.
|
|
this mirrors the stdio_impl.h cleanup. one header which is not
strictly needed, errno.h, is left in pthread_impl.h, because since
pthread functions return their error codes rather than using errno,
nearly every single pthread function needs the errno constants.
in a few places, rather than bringing in string.h to use memset, the
memset was replaced by direct assignment. this seems to generate much
better code anyway, and makes many functions which were previously
non-leaf functions into leaf functions (possibly eliminating a great
deal of bloat on some platforms where non-leaf functions require ugly
prologue and/or epilogue).
|
|
this header evolved to facilitate the extremely lazy practice of
omitting explicit includes of the necessary headers in individual
stdio source files; not only was this sloppy, but it also increased
build time.
now, stdio_impl.h is only including the headers it needs for its own
use; any further headers needed by source files are included directly
where needed.
|
|
some of these were coming from stdio functions locking files without
unlocking them. I believe it's useful for this to throw a warning, so
I added a new macro that's self-documenting that the file will never
be unlocked to avoid the warning in the few places where it's wrong.
|
|
on x86 and some other archs, functions which make function calls which
might go through a PLT incur a significant overhead cost loading the
GOT register prior to making the call. this load is utterly useless in
musl, since all calls are bound at library-creation time using
-Bsymbolic-functions, but the compiler has no way of knowing this, and
attempts to set the default visibility to protected have failed due to
bugs in GCC and binutils.
this commit simply manually assigns hidden/protected visibility, as
appropriate, to a few internal-use-only functions which have many
callers, or which have callers that are hot paths like getc/putc. it
shaves about 5k off the i386 libc.so with -Os. many of the
improvements are in syscall wrappers, where the benefit is just size
and performance improvement is unmeasurable noise amid the syscall
overhead. however, stdio may be measurably faster.
if in the future there are toolchains that can do the same thing
globally without introducing linking bugs, it might be worth
considering removing these workarounds.
|
|
1. don't open /dev/null just as a basis to copy flags; use shared
__fmodeflags function to get the right file flags for the mode.
2. handle the case (probably invalid, but whatever) case where the
original stream's file descriptor was closed; previously, the logic
re-closed it.
3. accept the "e" mode flag for close-on-exec; update dup3 to fallback
to using dup2 so we can simply call __dup3 instead of putting fallback
logic in freopen itself.
|
|
this will prevent gnulib from wrapping our strtod to handle this
useless feature.
|
|
with this change, pcc-built musl libc.so seems to work correctly. the
problem is that pcc generates GOT lookups for external-linkage symbols
even if they are hidden, rather than using GOT-relative addressing.
the entire reason we're using hidden visibility on the __libc object
is to make it accessible prior to relocations -- not to mention
inexpensive to access. unfortunately, the workaround makes it even
more expensive on pcc.
when the pcc issue is fixed, an appropriate version test should be
added so new pcc can use the much more efficient variant.
|
|
|
|
this doubles the performance of the fastest syscalls on the atom I
tested it on; improvement is reportedly much more dramatic on
worst-case cpus. cannot be used for cancellable syscalls.
|
