Age | Commit message (Collapse) | Author | Files | Lines |
|
the renaming was previously applied to all real versions of the
function in commit 3fa2eb2aba8d6b54dec53e7ad4c37e17392b166f.
|
|
the main motivation for this change is to aid in debugging. since the
main program's entry point is also named _start, it was difficult to
set breakpoints or quickly identify which _start execution stopped in.
|
|
|
|
such separation serves multiple purposes:
- by having the common path for __tls_get_addr alone in its own
function with a tail call to the slow case, code generation is
greatly improved.
- by having __tls_get_addr in it own file, it can be replaced on a
per-arch basis as needed, for optimization or ABI-specific purposes.
- by removing __tls_get_addr from __init_tls.c, a few bytes of code
are shaved off of static binaries (which are unlikely to use this
function unless the linker messed up).
|
|
|
|
previously, accesses to dynamic TLS had to check two conditions before
being able to use a dtv slot: (1) that the module index was within the
bounds of the current dtv size, and (2) that the dynamic tls for the
requested module index was already installed in the dtv.
this commit changes the installation strategy so that, whenever an
attempt is made to access dynamic TLS that's not yet installed in the
dtv, the dynamic TLS for all lower-index modules is also installed.
thus it provides a new invariant: if a given module index is within
the bounds of the current dtv size, we automatically know that its TLS
is installed and directly available. the requirement that the second
condition (above) be checked is eliminated.
|
|
this code is non-functional without further changes to link up the
arch-specific reloc types for tlsdesc and add asm implementations of
__tlsdesc_static and __tlsdesc_dynamic.
|
|
eventually this should help making dlerror thread-safe too.
|
|
this was one of the main instances of ugly code duplication: all archs
use basically the same types of relocations, but roughly equivalent
logic was duplicated for each arch to account for the different naming
and numbering of relocation types and variation in whether REL or RELA
records are used.
as an added bonus, both REL and RELA are now supported on all archs,
regardless of which is used by the standard toolchain.
|
|
so far the options are --library-path and --preload which override the
corresponding environment variables, and --list which forces the
behavior of ldd even if the invocation name is not ldd. both the
two-arg form and the one-arg form using an equals sign are supported.
based loosely on a patch proposed by Rune.
|
|
now that thread pointer is initialized always, ssp canary
initialization can be done unconditionally. this simplifies
the ldso as it does not try to detect ssp usage, and the
init function itself as it is always called exactly once.
this also merges ssp init path for shared and static linking.
|
|
|
|
consistent use of braces in if/else structure, line length.
|
|
record phentsize in struct dso, so the phdrs can be easily
enumerated via it. simplify all functions enumerating phdrs
to require only struct dso. also merge find_map_range and
find_dso to kernel_mapped_dso function that does both tasks
during single phdr enumeration.
|
|
|
|
this is the first step in an overhaul aimed at greatly simplifying and
optimizing everything dealing with thread-local state.
previously, the thread pointer was initialized lazily on first access,
or at program startup if stack protector was in use, or at certain
random places where inconsistent state could be reached if it were not
initialized early. while believed to be fully correct, the logic was
fragile and non-obvious.
in the first phase of the thread pointer overhaul, support is retained
(and in some cases improved) for systems/situation where loading the
thread pointer fails, e.g. old kernels.
some notes on specific changes:
- the confusing use of libc.main_thread as an indicator that the
thread pointer is initialized is eliminated in favor of an explicit
has_thread_pointer predicate.
- sigaction no longer needs to ensure that the thread pointer is
initialized before installing a signal handler (this was needed to
prevent a situation where the signal handler caused the thread
pointer to be initialized and the subsequent sigreturn cleared it
again) but it still needs to ensure that implementation-internal
thread-related signals are not blocked.
- pthread tsd initialization for the main thread is deferred in a new
manner to minimize bloat in the static-linked __init_tp code.
- pthread_setcancelstate no longer needs special handling for the
situation before the thread pointer is initialized. it simply fails
on systems that cannot support a thread pointer, which are
non-conforming anyway.
- pthread_cleanup_push/pop now check for missing thread pointer and
nop themselves out in this case, so stdio no longer needs to avoid
the cancellable path when the thread pointer is not available.
a number of cases remain where certain interfaces may crash if the
system does not support a thread pointer. at this point, these should
be limited to pthread interfaces, and the number of such cases should
be fewer than before.
|
|
linux, gcc, etc. all use "sh" as the name for the superh arch. there
was already some inconsistency internally in musl: the dynamic linker
was searching for "ld-musl-sh.path" as its path file despite its own
name being "ld-musl-superh.so.1". there was some sentiment in both
directions as to how to resolve the inconsistency, but overall "sh"
was favored.
|
|
|
|
|
|
|
|
STB_WEAK is only a weak reference for undefined symbols (those with a
section of SHN_UNDEF). otherwise, it's a weak definition. normally
this distinction would not matter, since a relocation referencing a
symbol that also provides a definition (not SHN_UNDEF) will always
succeed in finding the referenced symbol itself. however, in the case
of copy relocations, the referenced symbol itself is ignored in order
to search for another symbol to copy from, and thus it's possible that
no definition is found. in this case, if the symbol being resolved
happened to be a weak definition, it was misinterpreted as a weak
reference, suppressing the error path and causing a crash when the
copy relocation was performed with a null source pointer passed to
memcpy.
there are almost certainly still situations in which invalid
combinations of symbol and relocation types can cause the dynamic
linker to crash (this is pretty much inevitable), but the intent is
that crashes not be possible for symbol/relocation tables produced by
a valid linker.
|
|
this agrees with implementation practice on glibc and BSD systems, and
is the const-correct way to do things; it eliminates warnings from
passing pointers to const. the prototype without const came from
seemingly erroneous man pages.
|
|
the ABI allows the callee to clobber stack slots that correspond to
arguments passed in registers, so the caller must adjust the stack
pointer to reserve space appropriately. prior to this fix, the argv
array was possibly clobbered by dynamic linker code before passing
control to the main program.
|
|
|
|
this is still experimental and subject to change. for git checkouts,
an attempt is made to record the exact revision to aid in bug reports
and debugging. no version information is recorded in the static libc.a
or binaries it's linked into.
|
|
|
|
the affected branch only applies for DSOs that lack standard hash
table and only have the GNU hash table present.
|
|
PAGE_SIZE was hardcoded to 4096, which is historically what most
systems use, but on several archs it is a kernel config parameter,
user space can only know it at execution time from the aux vector.
PAGE_SIZE and PAGESIZE are not defined on archs where page size is
a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE)
to query it. Internally libc code defines PAGE_SIZE to libc.page_size,
which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink
as well. (Note that libc.page_size can be accessed without GOT, ie.
before relocations are done)
Some fpathconf settings are hardcoded to 4096, these should be actually
queried from the filesystem using statfs.
|
|
if fopen fails for a reason other than ENOENT, we must assume the
intent is that the path file be used. failure may be due to
misconfiguration or intentional resource-exhaustion attack (against
suid programs), in which case falling back to loading libraries from
an unintended path could be dangerous.
|
|
this seems to match what other systems do, and seems useful for
programs that have their libraries and plugins stored relative to the
executable.
|
|
1. an occurrence of ${ORIGIN} before $ORIGIN would be ignored due to
the strstr logic. (note that rpath contains multiple :-delimited paths
to be searched.)
2. data read by readlink was not null-terminated.
|
|
fallback to argv[0] as before. unlike argv[0], AT_EXECFN was a valid
(but possibly relative) pathname for the new program image at the time
the execve syscall was made.
as a special case, ignore AT_EXECFN if it begins with "/proc/", in
order not to give bogus (and possibly harmful) results when fexecve
was used.
|
|
|
|
previously, rpath was only honored for direct dependencies. in other
words, if A depends on B and B depends on C, only B's rpath (if any),
not A's rpath, was being searched for C. this limitation made
rpath-based deployment difficult in the presence of multiple levels of
library dependency.
at present, $ORIGIN processing in rpath is still unsupported.
|
|
this commit does not add versioning support; it merely fixes incorrect
lookups of symbols in libraries that contain versioned symbols.
previously, the version information was completely ignored, and
empirically this seems to have resulted in the oldest version being
chosen, but I am uncertain if that behavior was even reliable.
the new behavior being introduced is to completely ignore symbols
which are marked "hidden" (this seems to be the confusing nomenclature
for non-current-version) when versioning is present. this should solve
all problems related to libraries with symbol versioning as long as
all binaries involved are up-to-date (compatible with the
latest-version symbols), and it's the needed behavior for dlsym under
all circumstances.
|
|
this is needed for reused threads in the SIGEV_THREAD timer
notification system, and could be reused elsewhere in the future if
needed, though it should be refactored for such use.
for static linking, __init_tls.c is simply modified to export the TLS
info in a structure with external linkage, rather than using statics.
this perhaps makes the code more clear, since the statics were poorly
named for statics. the new __reset_tls.c is only linked if it is used.
for dynamic linking, the code is in dynlink.c. sharing code with
__copy_tls is not practical since __reset_tls must also re-zero
thread-local bss.
|
|
this is the modern way, and the only way that makes any sense. glibc
has this complicated mechanism with RPATH and RUNPATH that controls
whether RPATH is processed before or after LD_LIBRARY_PATH, presumably
to support legacy binaries, but there is no compelling reason to
support this, and better behavior is obtained by just fixing the
search order.
|
|
this fixes an oversight in the previous commit.
|
|
previously, errno could be meaningless when the caller wrote it to the
dlerror string or stderr. try to make it meaningful. also, fix
incorrect check for over-long program headers and instead actually
support them by allocating memory if needed.
|
|
this can only happen for invalid library files, but they were not
detected reliably because the variable was uninitialized.
|
|
one of the arguments to memcmp may be shorter than the length l-3, and
memcmp is under no obligation not to access past the first byte that
differs. instead use strncmp which conveys the correct semantics. the
performance difference is negligible here and since the code is only
use for shared libc, both functions are already linked anyway.
|
|
the dev/inode for the main app and the dynamic linker ("interpreter")
are not available, so the subsequent checks don't work. in general we
don't want to make exact string matches to existing libraries prevent
loading new ones, since this breaks loading upgraded modules in
module-loading systems. so instead, special-case it.
the motivation for this fix is that calling dlopen on the names
returned by dl_iterate_phdr or walking the link map (obtained by
dlinfo) seem to be the only methods available to an application to
actually get a list of open dso handles.
|
|
reject elf files which are not ET_EXEC/ET_DYN type as bad exec format,
and reject ET_EXEC files when they cannot be loaded at the correct
address, since they are not relocatable at runtime. the main practical
benefit of this is to make dlopen of the main program fail rather than
producing an unsafe-to-use handle.
|
|
|
|
it's not clear to me why the linker even outputs these headers if they
are null, but apparently it does so. with the default startfiles, they
will never be null anyway, but this patch allows eliminating crti,
crtn, crtbegin, and crtend (leaving only crt1) if the toolchain is
using init_array/fini_array (or for a C-only, no-ctor environment).
|
|
|
|
|
|
entry point was wrong for PIE. e_entry was being treated as an
absolute value, whereas it's actually relative to the load address
(which is zero for non-PIE).
phdr pointer was wrong for non-PIE. e_phoff was being treated as
load-address-relative, whereas it's actually a file offset in the ELF
file. in any case, map_library was already computing it correctly, and
the incorrect code in __dynlink was overwriting it with junk.
|
|
these are needed for some C++ library binaries including most builds
of libstdc++. I'm not entirely clear on the rationale. this patch does
not implement any special semantics for them, but as far as I can
tell, no special treatment is needed in correctly-linked programs;
this binding seems to exist only for catching incorrectly-linked
programs.
|
|
this more than compensates for the size increase of jmp_buf, and
greatly reduces bss/data size on archs with huge jmp_buf.
|