summaryrefslogtreecommitdiff
path: root/src/multibyte
AgeCommit message (Collapse)AuthorFilesLines
2018-09-12reduce spurious inclusion of libc.hRich Felker1-1/+1
libc.h was intended to be a header for access to global libc state and related interfaces, but ended up included all over the place because it was the way to get the weak_alias macro. most of the inclusions removed here are places where weak_alias was needed. a few were recently introduced for hidden. some go all the way back to when libc.h defined CANCELPT_BEGIN and _END, and all (wrongly implemented) cancellation points had to include it. remaining spurious users are mostly callers of the LOCK/UNLOCK macros and files that use the LFS64 macro to define the awful *64 aliases. in a few places, new inclusion of libc.h is added because several internal headers no longer implicitly include libc.h. declarations for __lockfile and __unlockfile are moved from libc.h to stdio_impl.h so that the latter does not need libc.h. putting them in libc.h made no sense at all, since the macros in stdio_impl.h are needed to use them correctly anyway.
2018-09-05define and use internal macros for hidden visibility, weak refsRich Felker1-4/+2
this cleans up what had become widespread direct inline use of "GNU C" style attributes directly in the source, and lowers the barrier to increased use of hidden visibility, which will be useful to recovering some of the efficiency lost when the protected visibility hack was dropped in commit dc2f368e565c37728b0d620380b849c3a1ddd78f, especially on archs where the PLT ABI is costly.
2017-09-01fix erroneous acceptance of f4 9x xx xx code sequences by utf-8 decoderRich Felker1-1/+1
the DFA table controlling accepted ranges for the f4 prefix used an incorrect upper bound of 0xa0 where it should have been 0x90, allowing such sequences to be accepted and decoded as non-Unicode-scalar values 0x110000 through 0x11ffff.
2017-08-31fix erroneous stop before input limit in mbsnrtowcs and wcsnrtombsRich Felker2-2/+6
the value computed as an output limit that bounds the amount of input consumed below the input limit was incorrectly being used as the actual amount of input consumed. instead, compute the actual amount of input consumed as a difference of pointers before and after the conversion. patch by Mikhail Kremnyov.
2016-06-21remove comments on copyright status from UTF-8 implementation filesRich Felker13-78/+0
despite clarifications made to the COPYRIGHT file in commit f0a61399330bae42beeb27d6ecd05570b3382a60, there continues to be confusion about whether the permissions granted actually apply to all files. I am the sole author of these files and clearly intend, and have always intended, for the grant of permission to apply to them.
2016-03-02explicitly include stdio.h to get EOF definition needed by wctobMichael Meeuwisse1-0/+1
2015-07-25fix undefined left-shift of negative values in utf-8 state tableRich Felker1-1/+1
2015-06-16byte-based C locale, phase 1: multibyte character handling functionsRich Felker7-3/+46
this patch makes the functions which work directly on multibyte characters treat the high bytes as individual abstract code units rather than as multibyte sequences when MB_CUR_MAX is 1. since MB_CUR_MAX is presently defined as a constant 4, all of the new code added is dead code, and optimizing compilers' code generation should not be affected at all. a future commit will activate the new code. as abstract code units, bytes 0x80 to 0xff are represented by wchar_t values 0xdf80 to 0xdfff, at the end of the surrogates range. this ensures that they will never be misinterpreted as Unicode characters, and that all wctype functions return false for these "characters" without needing locale-specific logic. a high range outside of Unicode such as 0x7fffff80 to 0x7fffffff was also considered, but since C11's char16_t also needs to be able to represent conversions of these bytes, the surrogate range was the natural choice.
2015-06-16fix btowc corner caseRich Felker1-0/+1
btowc is required to interpret its argument by conversion to unsigned char, unless the argument is equal to EOF. since the conversion to produces a non-character value anyway, we can just unconditionally convert, for now.
2015-04-22remove libc.h dependency from otherwise-independent multibyte codeRich Felker1-2/+4
2015-04-22remove cruft for libc struct accessor function and broken visibilityRich Felker1-4/+0
these were hacks to work around toolchains that could not properly optimize PIC accesses based on visibility and would generate GOT lookups even for hidden data, which broke the old dynamic linker. since commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 it no longer matters; the dynamic linker does not assume accessibility of this data until stage 3.
2014-12-18fix return value computation in one code path of wcsnrtombsRich Felker1-1/+1
the affected code was wrongly counting characters instead of bytes.
2014-11-15implement a private state for the uchar.h functionsJens Gustedt3-0/+6
The C standard is imperative on that: 7.28.1 ... If ps is a null pointer, each function uses its own internal mbstate_t object instead, which is initialized at program startup to the initial conversion state; and these functions are also not supposed to implicitly use the state of the wchar.h functions: 7.29.6.3 ... The implementation behaves as if no library function calls these functions with a null pointer for ps. Previously this resulted in two bugs. - The functions c16rtomb and mbrtoc16 would crash when called with ps set to null. - The function mbrtoc32 used the private state of mbrtowc, which it is not allowed to do.
2014-10-13implement uchar.h (C11 UTF-16/32 conversion) interfacesRich Felker4-0/+79
2014-07-01fix aliasing violations in mbtowc and mbrtowcRich Felker2-2/+4
these functions were setting wc to point to wchar_t aliasing itself as a "cheap" way to support null wc arguments. doing so was anything but cheap, since even without the aliasing violation, it would limit the compiler's ability to optimize. making wc point to a dummy object is equally easy and does not suffer from the above problems.
2014-06-02fix incorrect end pointer in some cases when wcsrtombs stops earlyRich Felker1-7/+15
when wcsrtombs stopped due to hitting zero remaining space in the output buffer, it was wrongly clearing the position pointer as if it had completed the conversion successfully. this commit rearranges the code somewhat to make a clear separation between the cases of ending due to running out of output buffer space, and ending due to reaching the end of input or an illegal sequence in the input. the new branches have been arranged with the hope of optimizing more common cases, too.
2013-12-12include cleanups: remove unused headers and add feature test macrosSzabolcs Nagy13-51/+3
2013-09-27fix buffer overflow in mbsrtowcsRich Felker1-1/+1
issue reported by Michael Forney: "If wn becomes 0 after processing a chunk of 4, mbsrtowcs currently continues on, wrapping wn around to -1, causing the rest of the string to be processed. This resulted in buffer overruns if there was only space in ws for wn wide characters." the original patch submitted added an additional check for !wn after the loop; to avoid extra branching, I instead just changed the wn>=4 check to wn>=5 to ensure that at least one slot remains after the word-at-a-time loop runs. this should not slow down the tail processing on real-world usage, since an extra slot that can't be processed in the word-at-a-time loop is needed for the null termination anyway.
2013-06-29fix failure of mbsrtowcs to record stop position when dest is fullRich Felker1-1/+4
2013-04-08mbrtowc: do not leave mbstate_t in permanent-fail state after EILSEQRich Felker1-1/+1
the standard is clear that the old behavior is conforming: "In this case, [EILSEQ] shall be stored in errno and the conversion state is undefined." however, the specification of mbrtowc has one peculiarity when the source argument is a null pointer: in this case, it's required to behave as mbrtowc(NULL, "", 1, ps). no motivation is provided for this requirement, but the natural one that comes to mind is that the intent is to reset the mbstate_t object. for stateful encodings, such behavior is actually specified: "If the corresponding wide character is the null wide character, the resulting state described shall be the initial conversion state." but in the case of UTF-8 where the mbstate_t object contains a partially-decoded character rather than a shift state, a subsequent '\0' byte indicates that the previous partial character is incomplete and thus an illegal sequence. naturally, applications using their own mbstate_t object should clear it themselves after an error, but the standard presently provides no way to clear the builtin mbstate_t object used when the ps argument is a null pointer. I suspect this issue may be addressed in the future by specifying that a null source argument resets the state, as this seems to have been the intent all along. for what it's worth, this change also slightly reduces code size.
2013-04-08implement mbtowc directly, not as a wrapper for mbrtowcRich Felker1-5/+39
the interface contract for mbtowc admits a much faster implementation than mbrtowc can achieve; wrapping mbrtowc with an extra call frame only made the situation worse. since the regex implementation uses mbtowc already, this change should improve regex performance too. it may be possible to improve performance in other places internally by switching from mbrtowc to mbtowc.
2013-04-08optimize mbrtowcRich Felker1-3/+2
this simple change, in my measurements, makes about a 7% performance improvement. at first glance this change would seem like a compiler-specific hack, since the modified code is not even used. however, I suspect the reason is that I'm eliminating a second path into the main body of the code, allowing the compiler more flexibility to optimize the normal (hot) path into the main body. so even if it weren't for the measurable (and quite notable) difference in performance, I think the change makes sense.
2013-04-08fix out-of-bounds access in UTF-8 decodingRich Felker1-1/+1
SA and SB are used as the lowest and highest valid starter bytes, but the value of SB was one-past the last valid starter. this caused access past the end of the state table when the illegal byte '\xf5' was encountered in a starter position. the error did not show up in full-character decoding tests, since the bogus state read from just past the table was unlikely to admit any continuation bytes as valid, but would have shown up had we tested feeding '\xf5' to the byte-at-a-time decoding in mbrtowc: it would cause the funtion to wrongly return -2 rather than -1. I may eventually go back and remove all references to SA and SB, replacing them with the values; this would make the code more transparent, I think. the original motivation for using macros was to allow misguided users of the code to redefine them for the purpose of enlarging the set of accepted sequences past the end of Unicode...
2013-04-04cleanup wcstombsRich Felker1-12/+1
remove redundant headers and comments; this file is completely trivial now. also, avoid temp var.
2013-04-04cleanup mbstowcs wrapperRich Felker1-10/+0
remove unneeded headers. this file is utterly trivial now and there's no sense in having a comment to state that it's in the public domain.
2013-04-04minor optimization to mbstowcsRich Felker1-2/+1
there is no need to zero-fill an mbstate_t object in the caller; mbsrtowcs will automatically treat a null pointer as the initial state.
2013-04-04fix incorrect range checks in wcsrtombsRich Felker1-3/+3
negative values of wchar_t need to be treated in the non-ASCII case so that they can properly generate EILSEQ rather than getting truncated to 8bit values and stored in the output.
2013-04-04overhaul mbsrtowcsRich Felker1-69/+64
these changes fix at least two bugs: - misaligned access to the input as uint32_t for vectorized ASCII test - incorrect src pointer after stopping on EILSEQ in addition, the text of the standard makes it unclear whether the mbstate_t object is to be modified when the destination pointer is null; previously it was cleared either way; now, it's only cleared when the destination is non-null. this change may need revisiting, but it should not affect most applications, since calling mbsrtowcs with non-zero state can only happen when the head of the string was already processed with mbrtowc. finally, these changes shave about 20% size off the function and seem to improve performance by 1-5%.
2012-09-06use restrict everywhere it's required by c99 and/or posix 2008Rich Felker10-11/+12
to deal with the fact that the public headers may be used with pre-c99 compilers, __restrict is used in place of restrict, and defined appropriately for any supported compiler. we also avoid the form [restrict] since older versions of gcc rejected it due to a bug in the original c99 standard, and instead use the form *restrict.
2012-05-26fix failure of mbsinit(0) (not UB; required to return nonzero)Rich Felker1-1/+1
issue reported by Richard Pennington; slightly simpler fix applied
2012-05-02fix longstanding exit logic bugs in mbsnrtowcs and wcsnrtombsRich Felker2-4/+9
these are POSIX 2008 (previously GNU extension) functions that are rarely used. apparently they had never been tested before, since the end-of-string logic was completely missing. mbsnrtowcs is used by modern versions of bash for its glob implementation, and and this bug was causing tab completion to hang in an infinite loop.
2012-02-24new attempt at working around the gcc 3 visibility bugRich Felker1-0/+4
since gcc is failing to generate the necessary ".hidden" directive in the output asm, generate it explicitly with an __asm__ statement...
2012-02-24remove useless attribute visibility from definitionsRich Felker1-1/+1
this was a failed attempt at working around the gcc 3 visibility bug affecting x86_64. subsequent patch will address it with an ugly but working hack.
2012-02-23cleanup and work around visibility bug in gcc 3 that affects x86_64Rich Felker2-6/+4
in gcc 3, the visibility attribute must be placed on both the declaration and on the definition. if it's omitted from the definition, the compiler fails to emit the ".hidden" directive in the assembly, and the linker will either generate textrels (if supported, such as on i386) or refuse to link (on targets where certain types of textrels are forbidden or impossible without further assumptions about memory layout, such as on x86_64). this patch also unifies the decision about when to use visibility into libc.h and makes the visibility in the utf-8 state machine tables based on libc.h rather than a duplicate test.
2011-03-25fix all implicit conversion between signed/unsigned pointersRich Felker1-1/+1
sadly the C language does not specify any such implicit conversion, so this is not a matter of just fixing warnings (as gcc treats it) but actual errors. i would like to revisit a number of these changes and possibly revise the types used to reduce the number of casts required.
2011-02-27cleanup utf-8 multibyte code, use visibility if possibleRich Felker3-84/+5
this code was written independently of musl, with support for a the backwards, nonstandard "31-bit unicode" some libraries/apps might want. unfortunately the extra code (inside #ifdef) makes the source harder to read and makes code that should be simple look complex, so i'm removing it. anyone who wants to use the old code can find it in the history or from elsewhere. also, change the visibility of the __fsmu8 state machine table to hidden, if supported. this should improve performance slightly in shared-library builds.
2011-02-21remove sample utf-8 code that's not part of the standard libraryRich Felker1-47/+0
2011-02-13cleanup multibyte stuff to remove ugly casts, sanitize the ptr align castsRich Felker3-27/+27
2011-02-12initial check-in, version 0.5.0v0.5.0Rich Felker18-0/+694