Age | Commit message (Collapse) | Author | Files | Lines |
|
getnameinfo() compares the size of the given struct sockaddr with
sizeof(struct sockaddr_in) and sizeof(struct sockaddr_in6) depending on
the net family. When you add a sockaddr of size sizeof(struct
sockaddr_storage) this function will fail because the size of the
sockaddr is too big. Change the check that it only fails if the size is
too small, but make it work when it is too big for example when someone
calls this function with a struct sockaddr_storage and its size.
This fixes a problem with IoTivity 1.0.0 and musl.
glibc and bionic are only failing if it is smaller, net/freebsd
implemented the != check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
previously, transient failures like fd exhaustion or other
resource-related errors were treated the same as non-existence of
these files, leading to fallbacks or false-negative results. in
particular:
- failure to open hosts resulted in fallback to dns, possibly yielding
EAI_NONAME for a hostname that should be defined locally, or an
unwanted result from dns that the hosts file was intended to
replace.
- failure to open services resulted in EAI_SERVICE.
- failure to open resolv.conf resulted in querying localhost rather
than the configured nameservers.
now, only permanent errors trigger the fallback behaviors above; all
other errors are reportable to the caller as EAI_SYSTEM.
|
|
previously, __lookup_ipliteral only checked its argument against the
requested address family, so IPv4 literals passed through to
__lookup_name if the caller asked for only IPv6 results, and likewise
for IPv6 literals when the caller asked for only IPv4. this resulted
in spurious DNS lookups that reportedly even succeeded with some
nameservers.
now, __lookup_ipliteral attempts to parse its argument as both IPv4
and IPv6, and returns an error (to stop further search) rather than 0
(no results yet) if the form of the argument mismatches the requested
address family.
based on patch by Julien Ramseier.
|
|
this case is specified as a mandatory ("shall fail") error.
based on patch by Julien Ramseier.
|
|
|
|
due to a reversed pointer difference computation, ns_skiprr always
returned a negative value, which functions using it would interpret as
an error.
patch by Yu Lu.
|
|
one stop condition for parsing abbreviated ipv6 addressed was missed,
allowing the internal ip[] buffer to overflow. this patch adds the
missing stop condition and masks the array index so that, in case
there are any remaining stop conditions missing, overflowing the
buffer is not possible.
|
|
|
|
all socket types are accepted at this point, but that may be changed
at a later time if the behavior is not meaningful for other types. as
before, omitting type (a value of 0) gives both UDP and TCP results,
and SOCK_DGRAM or SOCK_STREAM restricts to UDP or TCP, respectively.
for other socket types, the service name argument is required to be a
null pointer, and the protocol number provided by the caller is used.
|
|
based on patch by Timo Teräs, with some corrections to bounds checking
code and other minor changes.
while they are borderline scope creep, the functions added are fairly
small and are roughly the minimum code needed to use the results of
the res_query API without re-implementing error-prone DNS packet
parsing, and they are used in practice by some kerberos related
software and possibly other things. at this time there is no intent to
implement further nameser.h API functions.
|
|
if the loop stopped due to reaching the end of the string, the
subsequent increment could possibly move the position one past the end
of the buffer. no further writes happen, the reads cannot fault anyway
unless the stack completely lacks any zero bytes, and reading junk
should not yield an incorrect result from the function either.
nonetheless the code was wrong and needs to be fixed.
|
|
the condition was probably intended to be !*p rather than !p, but
neither is needed here. the subsequent code naturally handles the case
where it's already at end of string.
|
|
the outer getnameinfo function already has a properly-sized temporary
buffer for storing the reverse dns (ptr) result. there is no reason
for the callback to use a secondary buffer and copy it on success, and
doing so potentially expanded the impact of the dn_expand bug that was
fixed in commit 49d2c8c6bcf8c926e52c7f510033b6adc31355f5.
this change reduces the code size by a small amount, and also reduces
the run-time stack space requirements by about 256 bytes.
|
|
Empty name was rejected in dn_expand since commit
56b57f37a46dab432247bf29d96fcb11fbd02a6d
which is a regression as reported by Natanael Copa.
Furthermore if an offset pointer in a compressed name
pointed to a terminating 0 byte (instead of a label)
the returned name was not null terminated.
|
|
the previous implementations had several deficiencies, the most severe
of which was the inability to report unconfigured interfaces or
interfaces without ipv4 addresses. among the options discussed for
fixing this, using netlink turned out to be the one with the least
cost and most additional advantages. other improvements include:
if_nameindex now avoids duplicates in the list it produces, but still
includes legacy-style interface aliases if any are in use.
getifaddrs now reports hardware addresses and includes the scope_id
for link-local ipv6 addresses in the resulting address.
|
|
for LC_MESSAGES, translation of strerror and similar literal message
functions is supported. for messages in other places (particularly the
dynamic linker) that use format strings, translation is not yet
supported. in order to make it possible and safe, such messages will
need to be refactored to separate the textual content from the format.
for LC_TIME, the day and month names and strftime-style format strings
provided by nl_langinfo are supported for translation. however there
may be limitations, as some of the original C-locale nl_langinfo
strings are non-unique and thus perhaps non-suitable as keys.
overall, the locale support activated by this commit should not be
seen as complete and polished but as a basis for beginning to test
locale functionality and implement locales.
|
|
iptables and quagga need them to work.
|
|
|
|
according to the documentation in the man pages, the GNU extension
functions gethostbyaddr_r, gethostbyname_r and gethostbyname2_r are
guaranteed to set the result pointer to NULL in case of error or no
result.
|
|
this case is not even documented, but the kernel returns 0 here and it
makes sense to be consistent.
|
|
these are not pure syscall wrappers because they have to work around
kernel API bugs on 64-bit archs. the workarounds could probably be
made somewhat more efficient, but at the cost of more complexity. this
may be revisited later.
|
|
the results of a dns query, whether it's performed as part of one of
the standard name-resolving functions or directly by res_send, should
be a function of the query, not of the particular nameserver that
responds to it. thus, all responses which indicate a failure or
refusal by the nameserver, as opposed to a positive or negative result
for the query, should be ignored.
the strategy used is to re-issue the query immediately (but with a
limit on the number of retries, in case the server is really broken)
when a response code of 2 (server failure, typically transient) is
seen, and otherwise take no action on bad responses (which generally
indicate a misconfigured nameserver or one which the client does not
have permission to use), allowing the normal retry interval to apply
and of course accepting responses from other nameservers queried in
parallel.
empirically this matches the traditional resolver behavior for
nameservers that respond with a code of 2 in the case where there is
just a single nameserver configured. the behavior diverges when
multiple nameservers are available, since musl is querying them in
parallel. in this case we are mildly more aggressive at retrying.
|
|
the fcntl function is heavy, so make the syscall directly instead.
also, avoid the code size and runtime overhead of querying the old
flags, since it's reasonable to assume nothing will be set on a
newly-created socket. this code is only used on old kernels which lack
proper atomic close-on-exec support, so future changes that might
invalidate such an assumption do not need to be considered.
|
|
as usual, this is non-atomic, but better than producing an error or
failing to set the close-on-exec flag at all.
|
|
the input name is validated, the other parameters are assumed to be
valid (the list of already compressed names are not checked for
infinite reference loops or out-of-bound offsets).
names are handled case-sensitively for now.
|
|
trailing . should be accepted in domain name strings by convention
(RFC 1034), host name lookup accepts "." but rejects empty "", res_*
interfaces also accept empty name following existing practice.
|
|
A domain name is at most 255 bytes long (RFC 1035), but the string
representation is two bytes smaller so the strlen maximum is 253.
|
|
Due to an error introduced in commit fcc522c92335783293ac19df318415cd97fbf66b,
checking of the remaining output buffer space was not performed correctly,
allowing malformed input to write past the end of the buffer.
In addition, the loop detection logic failed to account for the possibility
of infinite loops with no output, which would hang the function.
The output size is now limited more strictly so only names with valid length
are accepted.
|
|
|
|
this also affects the legacy getservbyport family, which uses
getnameinfo as its backend.
|
|
this also affects the legacy gethostbyaddr family, which uses
getnameinfo as its backend.
some other minor changes associated with the refactoring of source
files are also made; in particular, the resolv.conf parser now uses
the same code that's used elsewhere to handle ip literals, so as a
side effect it can now accept a scope id for nameserver addressed with
link-local scope.
|
|
the service and protocol functions are defined also in other files,
and the protocol ones are actually non-nops elsewhere, so the weak
definitions in ent.c could have prevented the strong definitions from
getting pulled in and used in some static programs.
|
|
for all address types, a scope_id specified as a decimal value is
accepted. for addresses with link-local scope, a string containing the
interface name is also accepted.
some changes are made to error handling to avoid unwanted fallbacks in
the case where the scope_id is invalid: if an earlier name lookup
backend fails with an error rather than simply "0 results", this
failure now suppresses any later attempts with other backends.
in getnameinfo, a light "itoa" type function is added for generating
decimal scope_id results, and decimal port strings for services are
also generated using this function now so as not to pull in the
dependency on snprintf.
in netdb.h, a definition for the NI_NUMERICSCOPE flag is added. this
is required by POSIX (it was previously missing) and needed to allow
callers to suppress interface-name lookups.
|
|
the return value is unsigned, so negative results for "errors" do not
make sense; 0 is the value reserved for when the interface name does
not exist.
|
|
previously, all failures to obtain at least one address were treated
as nonexistant names (EAI_NONAME). this failed to account for the
possibility of transient failures (no response at all, or a response
with rcode of 2, server failure) or permanent failures that do not
indicate the nonexistence of the requested name. only an rcode of 3
should be treated as an indication of nonexistence.
|
|
since the buffer passed always has an actual size of 512 bytes, the
maximum possible response packet size, no out-of-bounds access was
possible; however, reading past the end of the valid portion of the
packet could cause the parser to attempt to process junk as answer
content.
|
|
the old resolver code used a function __ipparse which contained the
logic for inet_addr and inet_aton, which is needed in getaddrinfo.
this was phased out in the resolver overhaul in favor of directly
using inet_aton and inet_pton as appropriate.
this commit cleans up some stuff that was left behind.
|
|
this is the third phase of the "resolver overhaul" project.
this commit removes all of the old dns code, and switches the
__lookup_name backend (used by getaddrinfo, etc.) and the getnameinfo
function to use the newly implemented __res_mkquery and __res_msend
interfaces. for parsing the results, a new callback-based __dns_parse
function, based on __dns_get_rr from the old dns code, is used.
|
|
|
|
this is the second phase of the "resolver overhaul" project.
the key additions in this commit are the __res_msend and __res_mkquery
functions, which have been factored so as to provide a backend for
both the legacy res_* functions and the standard getaddrinfo and
getnameinfo functions. the latter however are still using the old
backend code; there is code duplication which still needs to be
removed, and this will be the next phase of the resolver overhaul.
__res_msend is derived from the old __dns_doqueries function, but
generalized to send arbitrary caller-provided packets in parallel
rather than producing the parallel queries itself. this allows it to
be used (completely trivially) as a backend for res_send. the
factored-out query generation code, with slightly more generality, is
now part of __res_mkquery.
|
|
iptables and ipsec-tools among others require these to function
properly.
|
|
this bug was introduced in the recent resolver overhaul commits. it
likely had visible symptoms. these were probably limited to wrongly
accepting truncated versions of over-long names (vs rejecting them),
as opposed to stack-based overflows or anything more severe, but no
extensive checks were made. there have been no releases where this bug
was present.
|
|
now that host and service lookup have been separated in the backend,
there's no need for service lookup functions to pull in the host
lookup code. moreover, dynamic allocation is no longer needed, so this
function should now be async-signal-safe. it's also significantly
smaller.
one change in getservbyname is also made: knowing that getservbyname_r
needs only two character pointers in the caller-provided buffer, some
wasted bss can be avoided.
|
|
these changes reduce the size of the function somewhat and remove many
of its dependencies, including free. in principle it should now be
async-signal-safe, but this has not been verified in detail.
minor changes to error handling are also made.
|
|
this is the first phase of the "resolver overhaul" project.
conceptually, the results of getaddrinfo are a direct product of a
list of address results and a list of service results. the new code
makes this explicit by computing these lists separately and combining
the results. this adds support for services that have both tcp and udp
versions, where the caller has not specified which it wants, and
eliminates a number of duplicate code paths which were all producing
the final output addrinfo structures, but in subtly different ways,
making it difficult to implement any of the features which were
missing.
in addition to the above benefits, the refactoring allows for legacy
functions like gethostbyname to be implemented without using the
getaddrinfo function itself. such changes to the legacy functions have
not yet been made, however.
further improvements include matching of service alias names from
/etc/services (previously only the primary name was supported),
returning multiple results from /etc/hosts (previously only the first
matching line was honored), and support for the AI_V4MAPPED and AI_ALL
flags.
features which remain unimplemented are IDN translations (encoding
non-ASCII hostnames for DNS lookup) and the AI_ADDRCONFIG flag.
at this point, the DNS-based name resolving code is still based on the
old interfaces in __dns.c, albeit somewhat simpler in its use of them.
there may be some dead code which could already be removed, but
changes to this layer will be a later phase of the resolver overhaul.
|
|
the other atomic FD_CLOEXEC interfaces (dup3, pipe2, socket) already
had such emulation in place. the justification for doing the emulation
here is the same as for the other functions: it allows applications to
simply use accept4 rather than having to have their own fallback code
for ENOSYS/EINVAL (which one you get is arch-specific!) and there is
no reasonable way an application could benefit from knowing the
operation is emulated/non-atomic since there is no workaround at the
application level for non-atomicity (that is the whole reason these
interfaces were added).
|
|
based on patch by orc.
|
|
this was unlikely to lead to any crash or dangerous behavior, but
caused adjacent string constants to be treated as part of the
protocols table, possibly returning nonsensical results for unknown
protocol names/numbers or when getprotoent was called in a loop to
enumerate all protocols.
|
|
the type int was taken from seemingly erroneous man pages. glibc uses
in_addr_t (uint32_t), and semantically, the arguments should be
unsigned.
|
|
based on patch by Timo Teräs; greatly simplified to use fprintf.
|