| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With the exception of a fenv implementation, the port is fully featured.
The port has been tested in or1ksim, the golden reference functional
simulator for OpenRISC 1000.
It passes all libc-test tests (except the math tests that
requires a fenv implementation).
The port assumes an or1k implementation that has support for
atomic instructions (l.lwa/l.swa).
Although it passes all the libc-test tests, the port is still
in an experimental state, and has yet experienced very little
'real-world' use.
|
|
it should be noted that the "real" __sysv_signal, which we do not
implement, is semantically different from signal. references to
__sysv_signal arise in code built against glibc under certain
combinations of feature test macros, and are almost surely
unintentional since the legacy sysv signal behavior has fundamental
race conditions that cannot be worked around and which make it
impossible to use safely.
|
|
|
|
this is the first step in an overhaul aimed at greatly simplifying and
optimizing everything dealing with thread-local state.
previously, the thread pointer was initialized lazily on first access,
or at program startup if stack protector was in use, or at certain
random places where inconsistent state could be reached if it were not
initialized early. while believed to be fully correct, the logic was
fragile and non-obvious.
in the first phase of the thread pointer overhaul, support is retained
(and in some cases improved) for systems/situation where loading the
thread pointer fails, e.g. old kernels.
some notes on specific changes:
- the confusing use of libc.main_thread as an indicator that the
thread pointer is initialized is eliminated in favor of an explicit
has_thread_pointer predicate.
- sigaction no longer needs to ensure that the thread pointer is
initialized before installing a signal handler (this was needed to
prevent a situation where the signal handler caused the thread
pointer to be initialized and the subsequent sigreturn cleared it
again) but it still needs to ensure that implementation-internal
thread-related signals are not blocked.
- pthread tsd initialization for the main thread is deferred in a new
manner to minimize bloat in the static-linked __init_tp code.
- pthread_setcancelstate no longer needs special handling for the
situation before the thread pointer is initialized. it simply fails
on systems that cannot support a thread pointer, which are
non-conforming anyway.
- pthread_cleanup_push/pop now check for missing thread pointer and
nop themselves out in this case, so stdio no longer needs to avoid
the cancellable path when the thread pointer is not available.
a number of cases remain where certain interfaces may crash if the
system does not support a thread pointer. at this point, these should
be limited to pthread interfaces, and the number of such cases should
be fewer than before.
|
|
this was missed in the previous commit.
|
|
linux, gcc, etc. all use "sh" as the name for the superh arch. there
was already some inconsistency internally in musl: the dynamic linker
was searching for "ld-musl-sh.path" as its path file despite its own
name being "ld-musl-superh.so.1". there was some sentiment in both
directions as to how to resolve the inconsistency, but overall "sh"
was favored.
|
|
|
|
|
|
|
|
this change is consistent with the corresponding glibc functions and
is semantically const-correct. the incorrect argument types without
const seem to have been taken from erroneous man pages.
|
|
and thereby remove otherwise-unnecessary inclusion of stddef.h
|
|
|
|
they were leaving junk in the upper bits.
|
|
commit 07827d1a82fb33262f686eda959857f0d28cd8fa seems to have
introduced this issue. sigqueue is called from the synccall core, at
which time, even implementation-internal signals are blocked. however,
pthread_sigmask removes the implementation-internal signals from the
old mask before returning, so that a process which began life with
them blocked will not be able to save a signal mask that has them
blocked, possibly causing them to become re-blocked later. however,
this was causing sigqueue to unblock the implementation-internal
signals during synccall, leading to deadlock.
|
|
a mips signal mask contains 128 bits, enough for signals 1 through
128. however, the exit status obtained from the wait-family functions
only has room for values up to 127. reportedly signal 128 was causing
kernelspace bugs, so it was removed from the kernel recently; even
without that issue, however, it was impossible to support it correctly
in userspace.
at the same time, the bug was masked on musl by SIGRTMAX incorrectly
yielding 64 on mips, rather than the "correct" value of 128. now that
the _NSIG issue is fixed, SIGRTMAX can be fixed at the same time,
exposing the full range of signals for application use.
note that the (nonstandardized) libc _NSIG value is actually one
greater than the max signal number, and also one greater than the
kernel headers' idea of _NSIG. this is the reason for the discrepency
with the recent kernel changes. since reducing _NSIG by one brought it
down from 129 to 128, rather than from 128 to 127, _NSIG/8, used
widely in the musl sources, is unchanged.
|
|
the idea here is to avoid advertising signals that don't exist and to
make these functions safe to call (e.g. from within other parts of the
implementation) on fake sigset_t objects which do not have the HURD
padding.
|
|
the trick here is that sigaction can track for us which signals have
ever had a signal handler set for them, and only those signals need to
be considered for reset. this tracking mask may have false positives,
since it is impossible to remove bits from it without race conditions.
false negatives are not possible since the mask is updated with atomic
operations prior to making the sigaction syscall.
implementation-internal signals are set to SIG_IGN rather than SIG_DFL
so that a signal raised in the parent (e.g. calling pthread_cancel on
the thread executing pthread_spawn) does not have any chance make it
to the child, where it would cause spurious termination by signal.
this change reduces the minimum/typical number of syscalls in the
child from around 70 to 4 (including execve). this should greatly
improve the performance of posix_spawn and other interfaces which use
it (popen and system).
to facilitate these changes, sigismember is also changed to return 0
rather than -1 for invalid signals, and to return the actual status of
implementation-internal signals. POSIX allows but does not require an
error on invalid signal numbers, and in fact returning an error tends
to confuse applications which wrongly assume the return value of
sigismember is boolean.
|
|
in signal() it is needed since __sigaction uses restrict in parameters
and sharing the buffer is technically an aliasing error. do the same
for the syscall, as at least qemu-user does not handle it properly.
|
|
this is necessary to meet the C++ ABI target. alternatives were
considered to avoid the size increase for non-sig jmp_buf objects, but
they seemed to have worse properties. moreover, the relative size
increase is only extreme on x86[_64]; one way of interpreting this is
that, if the size increase from this patch makes jmp_buf use too much
memory, then the program was already using too much memory when built
for non-x86 archs.
|
|
|
|
there are several reasons for this change. one is getting rid of the
repetition of the syscall signature all over the place. another is
sharing the constant masks without costly GOT accesses in PIC.
the main motivation, however, is accurately representing whether we
want to block signals that might be handled by the application, or all
signals.
|
|
use __syscall rather than syscall when failure is not possible or not
to be considered.
|
|
this caused sigsetjmp not to save the signal mask but instead to
clobber it with whatever happened to be in the sigjmb_buf prior to the
call.
|
|
the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.
note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.
|
|
|
|
that way it's consistent with existing sig* functions, and saves
some code size.
|
|
|
|
|
|
|
|
sigsetjmp: store temporaries in jmp_buf rather than on stack.
|
|
it's essential to decrement the stack pointer before writing to new
stack space, rather than afterwards. otherwise there is a race
condition during which asynchronous code (signals) could clobber the
data being stored.
it may be possible to optimize the code further using stwu, but I
wanted to avoid making any changes to the actual stack layout in this
commit. further improvements can be made separately if desired.
|
|
|
|
|
|
|
|
|
|
this mirrors the stdio_impl.h cleanup. one header which is not
strictly needed, errno.h, is left in pthread_impl.h, because since
pthread functions return their error codes rather than using errno,
nearly every single pthread function needs the errno constants.
in a few places, rather than bringing in string.h to use memset, the
memset was replaced by direct assignment. this seems to generate much
better code anyway, and makes many functions which were previously
non-leaf functions into leaf functions (possibly eliminating a great
deal of bloat on some platforms where non-leaf functions require ugly
prologue and/or epilogue).
|
|
|
|
only @PLT relocations are considered functions for purposes of
-Bsymbolic-functions, so always use @PLT. it should not hurt in the
static-linked case.
|
|
this is necessary because posix_spawn calls sigaction after vfork, and
if the thread pointer is not already initialized, initializing it in
the child corrupts the parent process's state.
|
|
based on initial work by rdp, with heavy modifications. some features
including threads are untested because qemu app-level emulation seems
to be broken and I do not have a proper system image for testing.
|
|
note that POSIX does not specify these functions as _Noreturn, because
POSIX is aligned with C99, not the new C11 standard. when POSIX is
eventually updated to C11, it will almost surely give these functions
the _Noreturn attribute. for now, the actual _Noreturn keyword is not
used anyway when compiling with a c99 compiler, which is what POSIX
requires; the GCC __attribute__ is used instead if it's available,
however.
in a few places, I've added infinite for loops at the end of _Noreturn
functions to silence compiler warnings. presumably
__buildin_unreachable could achieve the same thing, but it would only
work on newer GCCs and would not be portable. the loops should have
near-zero code size cost anyway.
like the previous _Noreturn commit, this one is based on patches
contributed by philomath.
|
|
to deal with the fact that the public headers may be used with pre-c99
compilers, __restrict is used in place of restrict, and defined
appropriately for any supported compiler. we also avoid the form
[restrict] since older versions of gcc rejected it due to a bug in the
original c99 standard, and instead use the form *restrict.
|
|
some minor changes to how hard-coded sets for thread-related purposes
are handled were also needed, since the old object sizes were not
necessarily sufficient. things have gotten a bit ugly in this area,
and i think a cleanup is in order at some point, but for now the goal
is just to get the code working on all supported archs including mips,
which was badly broken by linux rejecting syscalls with the wrong
sigset_t size.
|
|
|
|
basically, this version of the code was obtained by starting with
rdp's work from his ellcc source tree, adapting it to musl's build
system and coding style, auditing the bits headers for discrepencies
with kernel definitions or glibc/LSB ABI or large file issues, fixing
up incompatibility with the old binutils from aboriginal linux, and
adding some new special cases to deal with the oddities of sigaction
and pipe syscall interfaces on mips.
at present, minimal test programs work, but some interfaces are broken
or missing. threaded programs probably will not link.
|
|
|
|
|
|
on arm, the location of the saved-signal-mask flag and mask were off
by one between sigsetjmp and siglongjmp, causing incorrect behavior
restoring the signal mask. this is because the siglongjmp code assumed
an extra slot was in the non-sig jmp_buf for the flag, but arm did not
have this. now, the extra slot is removed for all archs since it was
useless.
also, arm eabi requires jmp_buf to have 8-byte alignment. we achieve
that using long long as the type rather than with non-portable gcc
attribute tags.
|
|
no idea why gcc refuses to compile the C code to use a tail call, but
it's best to use asm anyway so we don't have to rely on the quality of
the compiler's optimizations for correct code.
|
|
these changes are based on the following communication via email:
"I hereby grant that all of the code I have contributed to musl on or
before April 23, 2012 may be licensed under the terms of the following
MIT license:
Copyright (c) 2011-2012 Nicholas J. Kain
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE."
|
