Age | Commit message (Collapse) | Author | Files | Lines |
|
since the correct declaration was not visible, and since the
representation of the types wchar_t and wint_t always match, a
compiler would have to go out of its way to make this bug manifest,
but better to fix it anyway.
|
|
|
|
|
|
the original code was wrongly based on how it would be done in thumb
mode, but that's not needed because musl's asm only targets arm.
|
|
it's expected that this will be needed/useful only in asm, so I've
given it its own symbol that can be addressed in pc-relative ways from
asm rather than adding a field in the __libc structure which would
require hard-coding the offset wherever it's used.
|
|
this seems counter-intuitive since sem_trywait is supposed to just try
once, not wait for the semaphore. however, the retry loop is not a
wait. instead, it's to handle the case where the value changes due to
a simultaneous post or wait from another thread while the semaphore
value remains positive. in such a case, it's absolutely wrong for
sem_trywait to fail with EAGAIN because the semaphore is not busy.
|
|
based on patches by orc and Isaac Dunham, with some fixes. sys/io.h
exists and contains prototypes for these functions regardless of
whether the target arch has them; this is a bit unorthodox but I don't
think it will break anything. the function definitions do not exist
unless the appropriate SYS_* syscall number macro is defined, which
should make sure configure scripts looking for these functions don't
find them on other systems.
presently, sys/io.h does not have the inb/outb/etc. port io
macros/functions. I'd be surprised if ioperm/iopl are useful without
them, so they probably need to be added at some point in appropriate
bits/io.h files...
|
|
based on patches by orc and Isaac Dunham.
|
|
based on patch by orc and Isaac Dunham, with some fixes.
|
|
based on patch by orc and Isaac Dunham, with some details fixed.
|
|
|
|
|
|
also fix the alignment of jmp_buf to meet the abi. linux always
emulates fpu on mips if it's not present, so enabling this code
unconditionally is "safe" but may be slow. in the long term it may be
preferable to find a way to disable it on soft float builds.
|
|
untested but should be correct..
|
|
|
|
not sure this is the best fix but it should work
|
|
|
|
use the main program's PT_INTERP header if possible, since this is
sure to be a correct (and hopefully absolute) pathname.
|
|
|
|
the kernel wrongly expects the cmsg length field to be size_t instead
of socklen_t. in order to work around the issue, we have to impose a
length limit and copy to a local buffer. the length limit should be
more than sufficient for any real-world use; these headers are only
used for passing file descriptors and permissions between processes
over unix sockets.
|
|
these could have caused memory corruption due to invalid accesses to
the next field. all should be fixed now; I found the errors with fgrep
-r '__lock(&', which is bogus since the argument should be an array.
|
|
it had not been updated for the futex-based locks
|
|
|
|
after the thread unmaps its own stack/thread structure, the kernel,
performing child tid clear and futex wake, could clobber a new mapping
made at the same location as the just-removed thread's tid field.
disable kernel clearing of child tid to prevent this.
|
|
the mips abi reserves stack space equal to the size of the in-register
args for the callee to save the args, if desired. this would cause the
beginning of the thread structure to be clobbered...
|
|
the old code worked in qemu app-level emulation, but not on real
kernels where the clone syscall does not copy the register values to
the new thread. save arguments on the new thread stack instead.
|
|
with this change, threads on mips seem to be working
|
|
|
|
on other archs, like x86[_64], asm version is required
|
|
basically, this version of the code was obtained by starting with
rdp's work from his ellcc source tree, adapting it to musl's build
system and coding style, auditing the bits headers for discrepencies
with kernel definitions or glibc/LSB ABI or large file issues, fixing
up incompatibility with the old binutils from aboriginal linux, and
adding some new special cases to deal with the oddities of sigaction
and pipe syscall interfaces on mips.
at present, minimal test programs work, but some interfaces are broken
or missing. threaded programs probably will not link.
|
|
|
|
the type doesn't actually matter, just the size, but it's nice to be
consistent...
|
|
this file can be overridden by a same-named file in an arch dir.
|
|
|
|
if libc.a is compiled PIC for use in static PIE code, this should not
cause the dynamic linker (which still does not support static-linked
main program) to be built into libc.a.
|
|
most importantly, the name for such libs was being set from an
uninitialized buffer. also, shortname always had an initial '/'
character, making it useless for looking up already-loaded libraries
by name, and thus causing repeated searches through the library path.
major changes now:
- shortname is the base name for library lookups with no explicit
pathname. it's initially clear for libraries loaded with an explicit
pathname (and for the main program), but will be set if the same
library (detected via inodes match) is later found by a search.
- exact name match is never used to identify libraries loaded with an
explicit pathname. in this case, there's no explicit search, so we
can just stat the file and check for inode match.
|
|
previously this was being handled the same as a library-specific,
dependency-order lookup on the next library in the global chain, which
is likely to be utterly meaningless. instead the lookup needs to be in
the global namespace, but omitting the initial portion of the global
library chain up through the calling library.
|
|
this is not a standard but it's the traditional behavior and it's more
useful because the caller can reliably detect errors.
|
|
|
|
on arm, the location of the saved-signal-mask flag and mask were off
by one between sigsetjmp and siglongjmp, causing incorrect behavior
restoring the signal mask. this is because the siglongjmp code assumed
an extra slot was in the non-sig jmp_buf for the flag, but arm did not
have this. now, the extra slot is removed for all archs since it was
useless.
also, arm eabi requires jmp_buf to have 8-byte alignment. we achieve
that using long long as the type rather than with non-portable gcc
attribute tags.
|
|
no idea why gcc refuses to compile the C code to use a tail call, but
it's best to use asm anyway so we don't have to rely on the quality of
the compiler's optimizations for correct code.
|
|
|
|
|
|
|
|
the new version is largely the work of Solar Designer, with minor
changes for integration with musl. compared to the old code, text size
is reduced by about 7k, stack space usage by about 70k, and
performance is greatly improved by avoiding expensive calculation of
constant tables on each run.
this version also adds support for extended des-based password hashes,
which allow for unlimited key (password) length and configurable
iteration counts.
i've also published the interface for crypt_r in a new crypt.h header.
especially since this is not a standard interface, i did not feel
compelled to match the glibc abi for the crypt_data structure. the
glibc structure is way too big to allocate on the stack; in fact it's
so big that the first usage may cause the main thread to exceed its
pre-committed stack size of 128k and thus could cause the program to
crash even on systems with overcommit disabled. the only legitimate
use of crypt_data for crypt_r is to store the hash string to return,
so i've reserved 256 bytes, which should be more than sufficient
(longest known password hashes are ~60 characters, and beyond that is
possibly even exceeding some implementations' passwd file field size
limit).
|
|
based on a patch submitted by Kristian L. <email@thexception.net>
|
|
on old kernels, there's no way to detect errors; we must assume
negative syscall return values are pgrp ids. but if the F_GETOWN_EX
fcntl works, we can get a reliable answer.
|
|
The long double adjustment was wrong:
The usual check is
mant_bits & 0x7ff == 0x400
before doing a mant_bits++ or mant_bits-- adjustment since
this is the only case when rounding an inexact ld80 into
double can go wrong. (only in nearest rounding mode)
After such a check the ++ and -- is ok (the mantissa will end
in 0x401 or 0x3ff).
fma is a bit different (we need to add 3 numbers with correct
rounding: hi_xy + lo_xy + z so we should survive two roundings
at different places without precision loss)
The adjustment in fma only checks for zero low bits
mant_bits & 0x3ff == 0
this way the adjusted value is correct when rounded to
double or *less* precision.
(this is an important piece in the fma puzzle)
Unfortunately in this case the -- is not a correct adjustment
because mant_bits might underflow so further checks are needed
and this was the source of the bug.
|
|
unicode char data has both "W" and "F" wide types and the old table
only included the "W" ones. this omitted U+3000 (ideographic space)
and all the wide-ascii, etc.
|
|
this is silly, but it makes apps that read binary junk and interpret
it as ld80 "safer", and it gets gnulib to stop replacing printf...
|