Age | Commit message (Collapse) | Author | Files | Lines |
|
for functions implemented in C, this is a requirement of C11 (F.6);
strictly speaking that text does not apply to standard library
functions, but it seems to be intended to apply to them, and C2x is
expected to make it a requirement.
failure to drop excess precision is particularly bad for inverse trig
functions, where a value with excess precision can be outside the
range of the function (entire range, or range for a particular
subdomain), breaking reasonable invariants a caller may expect.
|
|
this extends commit 5a105f19b5aae79dd302899e634b6b18b3dcd0d6, removing
timer[fd]_settime and timer[fd]_gettime. the timerfd ones are likely
to have been used in software that started using them before it could
rely on libc exposing functions.
|
|
this extends commit 5a105f19b5aae79dd302899e634b6b18b3dcd0d6, removing
clock_settime, clock_getres, clock_nanosleep, and settimeofday.
|
|
catan was fixed in 10e4bd3780050e75b72aac5d85c31816419bb17d but the
same bug in catanf and catanl was overlooked. the patch is completely
analogous.
|
|
some nontrivial number of applications have historically performed
direct syscalls for these operations rather than using the public
functions. such usage is invalid now that time_t is 64-bit and these
syscalls no longer match the types they are used with, and it was
already harmful before (by suppressing use of vdso).
since syscall() has no type safety, incorrect usage of these syscalls
can't be caught at compile-time. so, without manually inspecting or
running additional tools to check sources, the risk of such errors
slipping through is high.
this patch renames the syscalls on 32-bit archs to clock_gettime32 and
gettimeofday_time32, so that applications using the original names
will fail to build without being fixed.
note that there are a number of other syscalls that may also be unsafe
to use directly after the time64 switchover, but (1) these are the
main two that seem to be in widespread use, and (2) most of the others
continue to have valid usage with a null timeval/timespec argument, as
the argument is an optional timeout or similar.
|
|
|
|
For Thumb2 compatibility, replace two instances of a single
instruction "orr with a variable shift" with the two instruction
equivalent. Neither of the replacements are in a performance critical
loop.
|
|
commit 1b0ce9af6d2aa7b92edaf3e9c631cb635bae22bd introduced this bug
back in 2012 and it was never noticed, presumably since the affected
planes are essentially unused in Unicode.
|
|
this interface contract is entirely internal to dynlink.c.
|
|
adding this condition makes the entire convert_ioctl_struct function
and compat_map table statically unreachable, and thereby optimized out
by dead code elimination, on archs where they are not needed.
|
|
VIDIOC_OMAP3ISP_STAT_REQ is a device-specific command for the omap3isp
video device. the command number is in a device-private range and
therefore could theoretically be used by other devices too in the
future, but problematic clashes should not be able to arise without
intentional misuse.
|
|
there's only one matching entry for any given command so this had no
functional distinction, but additional loops are pointless and
wasteful.
|
|
commit ae388becb529428ac926da102f1d025b3c3968da accidentally
introduced #define SYSCALL_NO_TLS 1 in mmap.c, which was probably a
stale change left around from unrelated syscall timing measurements.
reverse it.
|
|
this commit covers all remaining ioctls I'm aware of that use
time_t-derived types in their interfaces. it may still be incomplete,
and has undergone only minimal testing for a few commands used in
audio playback.
the SNDRV_PCM_IOCTL_SYNC_PTR command is special-cased because, rather
than the whole structure expanding, it has two substructures each
padded to 64 bytes that expand within their own 64-byte reserved zone.
as long as it's the only one of its type, it doesn't really make sense
to make a general framework for it, but the existing table framework
is still used for the substructures in the special-case. one of the
substructures, snd_pcm_mmap_status, has a snd_pcm_uframes_t member
which is not a timestamp but is expanded just like one, to match the
64-bit-arch version of the structure. this is handled just like a
timestamp at offset 8, and is the motivation for the conversions table
holding offsets of individual values to be expanded rather than
timespec/timeval type pairs.
for some of the types, the size to which they expand is dependent on
whether the arch's ABI aligns 8-byte types on 8-byte boundaries.
new_req entries in the table need to reflect this size to get the
right ioctl request number that will match what callers pass, but we
don't have access to the actual structure type definitions here and
duplicating them would be cumbersome. instead, the new_misaligned
macro introduced here constructs an artificial object whose size is
the result of expanding a misaligned timespec/timeval to 64-bit and
imposing the arch's alignment on the result, which can be passed to
the _IO{R,W,WR} macros.
|
|
record offsets of individual slots that expand from 32- to 64-bit,
rather than timespec/timeval pairs. this flexibility will be needed
for some ioctls. reduce size of types in table. adjust representation
of offsets to include a count rather than needing -1 padding so that
the table is less ugly and doesn't need large diffs if we increase max
number of slots.
|
|
with the current set of supported ioctls, this conversion is hardly an
improvement, but it sets the stage for being able to do alsa, v4l2,
ppp, and other ioctls with timespec/timeval-derived types. without
this capability, a lot of functionality users depend on would stop
working with the time64 switchover.
|
|
always try the time64 syscall first since we can use its success to
conclude that no conversion is needed (any setsockopt for the
timestamp options would have succeeded without need for fallbacks).
otherwise, we have to remember the original controllen for each
msghdr, requiring O(vlen) space, so vlen must be bounded. linux clamps
it to IOV_MAX for sendmmsg only (not recvmmsg), but doing the same for
recvmmsg is not unreasonable, especially since the limitation will
only apply to old kernels.
we could optimize to avoid trying SYS_recvmmsg_time64 first if all
msghdrs have controllen zero, or support unlimited vlen by looping and
emulating the timeout logic, but I'm not inclined to do complex and
error-prone optimizations on a function that has so many underlying
problems it should really never be used.
|
|
the definitions of SO_TIMESTAMP* changed on 32-bit archs in commit
38143339646a4ccce8afe298c34467767c899f51 to the new versions that
provide 64-bit versions of timeval/timespec structure in control
message payload. socket options, being state attached to the socket
rather than function calls, are not trivial to implement as fallbacks
on ENOSYS, and support for them was initially omitted on the
assumption that the ioctl-based polling alternatives (SIOCGSTAMP*)
could be used instead by applications if setsockopt fails.
unfortunately, it turns out that SO_TIMESTAMP is sufficiently old and
widely supported that a number of applications assume it's available
and treat errors as fatal.
this patch introduces emulation of SO_TIMESTAMP[NS] on pre-time64
kernels by falling back to setting the "_OLD" (time32) versions of the
options if the time64 ones are not recognized, and performing
translation of the SCM_TIMESTAMP[NS] control messages in recvmsg.
since recvmsg does not know whether its caller is legacy time32 code
or time64, it performs translation for any SCM_TIMESTAMP[NS]_OLD
control messages it sees, leaving the original time32 timestamp as-is
(it can't be rewritten in-place anyway, and memmove would be mildly
expensive) and appending the converted time64 control message at the
end of the buffer. legacy time32 callers will see the converted one as
a spurious control message of unknown type; time64 callers running on
pre-time64 kernels will see the original one as a spurious control
message of unknown type. a time64 caller running on a kernel with
native time64 support will only see the time64 version of the control
message.
emulation of SO_TIMESTAMPING is not included at this time since (1)
applications which use it seem to be prepared for the possibility that
it's not present or working, and (2) it can also be used in sendmsg
control messages, in a manner that looks complex to emulate
completely, and costly even when running on a time64-supporting
kernel.
corresponding changes in recvmmsg are not made at this time; they will
be done separately.
|
|
The R_ARM_THM_JUMP19 relocation type generated for the original code
when targeting Thumb 2 is not supported by the gold linker.
|
|
When FE_DFL_ENV is passed to fesetenv(), the very first instruction
lw t1, 0(a0) will fail since a0 is -1.
|
|
|
|
in commit 22daaea39f1cc5f7391f0a5cd84576ffb58c2860, the
__dlsym_redir_time64 function providing the backend for __dlsym_time64
was defined only in the dynamic linker, and thus was undefined when
static linking a program referencing dlsym. use the same stub_dlsym
definition that provides __dlsym (the non-redirecting backend) for
static linked programs to provide it, conditional on _REDIR_TIME64.
|
|
|
|
here _REDIR_TIME64 is used as an indication that there's an old ABI,
and thereby the old time32 timespec fields of struct stat.
keeping struct stat compatible and providing both versions of the
timespec fields is done so that ftw/nftw does not need painful compat
shims, and (more importantly) so that similar interfaces between pairs
of libc consumers (applications/libraries) will be less likely to
break when one has been rebuilt for time64 but the other has not.
|
|
these functions cannot provide the glibc lfs64-ABI-compatible symbols
when time_t differs from what it was in that ABI. instead, the aliases
need to be provided by the time32 compat shims or through some other
mechanism.
|
|
|
|
|
|
the existing implementation of case mappings was very small (typically
around 1.5k), but unmaintainable, requiring manual addition of new
case mappings with each new edition of Unicode. often, it turned out
that newly-added case mappings were not easily representable in the
existing tightly-constrained table structures, requiring new hacks to
be invented and delaying support for new characters.
the new implementation added here follows the pattern used for
character class membership, with a two-level table allowing Unicode
blocks for which no data is needed to be elided. however, rather than
single-bit data, each character maps to a one of up to 6 case-mapping
rules available to its block, where 6 is floor(cbrt(256)) and allow 3
characters to be represented per byte (vs 8 with bit tables). blocks
that would need more than 6 rules designate one as an exception and
let lookup pass into a binary search of exceptional cases for the
block.
the number 6 was chosen empirically; many blocks would be ok with 4
rules (uncased, lower, upper, possible exceptions), some even just
with 2, but the latter are rare and fitting 4 characters per byte
rather than 3 does not save significant space. moreover, somewhat
surprisingly, there are sufficiently many blocks where even 4 rules
don't suffice without a lot of exceptions (blocks where some case
pairs are laced, others offset) that originally I was looking at
supporting variable-width tables, with 1-, 2-, or 3-bit entries,
thereby allowing blocks with 8 rules. as implemented in my
experiments, that version was significantly larger and involved more
memory accesses/cache lines.
improvements in size at the expense of some performance might be
possible by utilizing iswalpha data or merging the table of case
mapping identity with alphabetic identity. these were explored
somewhat when the code was first written, and might be worth
revisiting in the future.
|
|
somehow this seems to have been overlooked. add it now so that
subsequent overhaul of case mapping implementation will not introduce
a functional change at the same time.
|
|
linux fails the open with ENOSPC, but POSIX mandates EAGAIN.
|
|
commit 2b4fd6f75b4fa66d28cddcf165ad48e8fda486d1 added time64 for this
function, but did so with a hidden assumption that the new time64
version of struct timex will be layout-compatible with the old one.
however, there is little benefit to doing it that way, and the cost is
permanent special-casing of 32-bit archs with 64-bit time_t in the
public interface definitions.
instead, do a full translation of the structure going in and out. this
commit is actually a revision to an earlier uncommited version of the
code.
|
|
presently the kernel does not actually define time64 versions of these
syscalls, and they're not really needed except to represent extreme
cpu time usage. however, x32's versions of the syscalls already behave
as time64 ones, meaning the functions were broken on x32 if the caller
used any part of the rusage result other than ru_utime and ru_stime.
commit 7e8171143124f7f510db555dc6f6327a965a3e84 made it possible to
fix this by treating x32's syscalls as time64 versions.
in the non-time64-syscall case, make the syscall with the rusage
destination pointer adjusted so that all members but the timevals line
up between the libc and kernel structures. on 64-bit archs, or present
32-bit archs with 32-bit time_t, the timevals will line up too and no
further work is needed. for future 32-bit archs with 64-bit time_t,
the timevals are copied into place, contingent on time_t being larger
than long.
|
|
aside from the special value EOF, ungetc is specified to accept and
convert values outside the range of unsigned char. conversion takes
place automatically as part of assignment when storing into the
buffer, but the return value is also required to be the resulting
converted value, and this requirement was not satisfied.
simplified from patch by Wang Jianjian.
|
|
based on patch by Dan Gohman, who caught this via compiler warnings.
analysis by Szabolcs Nagy determined that it's a bug, whereby errno
can be set incorrectly for values where the coercion from long double
to double causes rounding. it seems likely that floating point status
flags may be set incorrectly as a result too.
at the same time, clean up use of preprocessor concatenation involving
LDBL_MANT_DIG, which spuriously depends on it being a single unadorned
decimal integer literal, and instead use the equivalent formulation
2/LDBL_EPSILON. an equivalent change on the printf side was made in
commit bff6095d915f3e41206e47ea2a570ecb937ef926.
|
|
SQRT.fmt exists on MIPS II+ (float), MIPS III+ (double).
ABS.fmt exists on MIPS I+ but only cores with ABS2008 flag in FCSR
implement the required behaviour.
|
|
|
|
Both sqrt and sqrtf shifted the signed exponent as signed int to adjust
the bit representation of the result. There are signed right shifts too
in the code but those are implementation defined and are expected to
compile to arithmetic shift on supported compilers and targets.
|
|
mbsrtowcs contains "vectorized" loops to quickly step over bytes
without the high bit set; these have undefined behavior by virtue of
aliasing uint32_t over top of char data for the accesses.
commit 4d0a82170a25464c39522d7190b9fe302045ddb2 fixed the
corresponding usage in string functions by using the may_alias
attribute conditional on __GNUC__ and disabled the vectorized code in
its absence. do the same for mbsrtowcs.
|
|
Some declarations of __tls_get_new were left in the code, even
though the definition got removed in
commit 9d44b6460ab603487dab4d916342d9ba4467e6b9
install dynamic tls synchronously at dlopen, streamline access
this can make the build fail with
ld: lib/libc.so: hidden symbol `__tls_get_new' isn't defined
when libc.so is linked without --gc-sections, because a .hidden
declaration in asm code creates a reference even if the symbol
is not actually used.
|
|
lrint in (LONG_MAX, 1/DBL_EPSILON) and in (-1/DBL_EPSILON, LONG_MIN)
is not trivial: rounding to int may be inexact, but the conversion to
int may overflow and then the inexact flag must not be raised. (the
overflow threshold is rounding mode dependent).
this matters on 32bit targets (without single instruction lrint or
rint), so the common case (when there is no overflow) is optimized by
inlining the lrint logic, otherwise the old code is kept as a fallback.
on my laptop an i486 lrint call is asm:10ns, old c:30ns, new c:21ns
on a smaller arm core: old c:71ns, new c:34ns
on a bigger arm core: old c:27ns, new c:19ns
|
|
mips32 has two fpu register file variants: FR=0 with 32 32-bit
registers, where pairs of neighboring even/odd registers are used to
represent doubles, and FR=1 with 32 64-bit registers, each of which
can store a single or double.
up through r5 (our "mips" arch), the supported ABI uses FR=0, but
modern compilers generate "fpxx" model code that can safely operate
with either model. r6, which is an incompatible but similar ISA, drops
FR=0 and only provides the FR=1 model. as such, setjmp and longjmp,
which depended on being able to save and restore call-saved doubles by
storing and loading their 32-bit halves, were completely broken in the
presence of floating point code on mips r6.
to fix this, use the s.d and l.d mnemonics to store and load fpu
registers. these expand to the existing swc1 and lwc1 instructions for
pairs of 32-bit fpu registers on mips1, but on mips2 and later they
translate directly to the 64-bit sdc1 and ldc1.
with FR=0, sdc1 and ldc1 behave just like the pairs of swc1 and lwc1
instructions they replace, storing or loading the even/odd pair of fpu
registers that can be treated as separate single-precision floats or
as a unit representing a double. but with FR=1, they store/load
individual 64-bit registers. this yields the ABI-correct behavior on
mips r6, and should make linking of pre-r6 (plain "mips") code with
"fp64" model code workable, although this is and will likely remain
unsupported usage.
in addition to the mips r6 problem this change fixes, reportedly
clang's internal assembler refuses to assemble swc1 and lwc1
instructions for odd register indices when building for "fpxx" model
(the default). this caused setjmp and longjmp not to build. by using
the s.d and l.d forms, this problem is avoided too.
as a bonus, code size is reduced everywhere but mips1.
|
|
armv8 removed the coprocessor instructions other than cp14, so
on an armv8 system the related hwcaps should never be set.
new llvm complains about the use of coprocessor instructions in
armv8-a mode (even though they are never executed at runtime),
so ifdef them out when musl is built for armv8.
|
|
in the timer thread start function, self->timer_id was accessed
without synchronization; the timer thread could fail to see the store
from the calling thread, resulting in timer_delete failing to delete
the correct kernel-level timer.
this fix is based on a patch by changdiankang, but with the load moved
to after receiving the timer_delete signal rather than just after the
start barrier, so as not to retain the possibility of data race with
timer_delete.
|
|
commit 8a544ee3a2a75af278145b09531177cab4939b41 introduced a
dependency of the failure path for explicit scheduling at thread
creation on __clone's handling of the start function returning, which
should result in SYS_exit.
as noted in commit 05870abeaac0588fb9115cfd11f96880a0af2108, the arm
version of __clone was broken in this case. in the past, the mips
version was also broken; it was fixed in commit
8b2b61e0001281be0dcd3dedc899bf187172fecb.
since this code path is pretty much entirely untested (previously only
reachable in applications that call the public clone() and return from
the start function) and consists of fragile per-arch asm, don't assume
it works, at least not until it's been thoroughly tested. instead make
the SYS_exit syscall from the start function's failure path.
|
|
commit cc3a4466605fe8dfc31f3b75779110ac93055bc1 fixed this for printf
but neglected to fix wprintf.
Previously, %lf caused a failure to output.
|
|
we don't actually support building asm source files as thumb1, but
it's possible that the condition __ARM_ARCH>=5 would be false on old
compilers that did not define __ARM_ARCH at all. avoiding that would
require enumerating all of the possible __ARM_ARCH_*__ macros for
testing.
as noted in commit 05870abeaac0588fb9115cfd11f96880a0af2108, mov lr,pc
is not valid for saving a return address when in thumb mode. since
this code is a hot path (dynamic TLS access), don't do the out-of-line
bl->bx chaining to save the return value; instead, use the fact that
this file is preprocessed asm to add the missing thumb bit with an add
in place of the mov.
the change here does not affect builds for ISA levels new enough to
have a thread pointer read instruction, or for armv5 and later as long
as the compiler properly defines __ARM_ARCH, or for any build as arm
(not thumb) code. it's likely that it makes no difference whatsoever
to any present-day practical build environments, but nonetheless now
it's safe.
as an alternative, we could just assume __thumb__ implies availability
of blx since we don't support building asm source files as thumb1. I
didn't do that in order to avoid having a wrong assumption here if
that ever changes.
|
|
as noted in commit 05870abeaac0588fb9115cfd11f96880a0af2108, mov lr,pc
is not a valid method for saving the return address in code that might
be built as thumb.
this one is unlikely to matter, since any ISA level that has thumb2
should also have native implementations of atomics that don't involve
kuser_helper, and the affected code is only used on very old kernels
to begin with.
|
|
mov lr,pc is not a valid way to save the return address in thumb mode
since it omits the thumb bit. use a chain of bl and bx to emulate blx.
this could be avoided by converting to a .S file with preprocessor
conditions to use blx if available, but the time cost here is
dominated by the syscall anyway.
while making this change, also remove the remnants of support for
pre-bx ISA levels. commit 9f290a49bf9ee247d540d3c83875288a7991699c
removed the hack from the parent code paths, but left the unnecessary
code in the child. keeping it would require rewriting two code paths
rather than one, and is useless for reasons described in that commit.
|
|
previously, when pthread_create failed due to inability to set
explicit scheduling according to the requested attributes, the nascent
thread was detached and made responsible for its own cleanup via the
standard pthread_exit code path. this left it consuming resources
potentially well after pthread_create returned, in a way that the
application could not see or mitigate, and unnecessarily exposed its
existence to the rest of the implementation via the global thread
list.
instead, attempt explicit scheduling early and reuse the failure path
for __clone failure if it fails. the nascent thread's exit futex is
not needed for unlocking the thread list, since the thread calling
pthread_create holds the thread list lock the whole time, so it can be
repurposed to ensure the thread has finished exiting. no pthread_exit
is needed, and freeing the stack, if needed, can happen just as it
would if __clone failed.
|
|
if setting scheduling properties succeeds, the new thread may end up
with lower priority than the caller, and may be unable to continue
running due to another intermediate-priority thread. this produces a
priority inversion situation for the thread calling pthread_create,
since it cannot return until the new thread reports success.
originally, the parent was responsible for setting the new thread's
priority; commits b8742f32602add243ee2ce74d804015463726899 and
40bae2d32fd6f3ffea437fa745ad38a1fe77b27e changed it as part of
trimming down the pthread structure. since then, commit
04335d9260c076cf4d9264bd93dd3b06c237a639 partly reversed the changes,
but did not switch responsibilities back. do that now.
|