| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
also fix visibility of the glue function used.
|
|
this both allows removal of some of the main remaining uses of the
SHARED macro and clears one obstacle to static-linked dlopen support,
which may be added at some point in the future.
specialized single-TLS-module versions of __copy_tls and __reset_tls
are removed and replaced with code adapted from their dynamic-linked
versions, capable of operating on a whole chain of TLS modules, and
use of the dynamic linker's DSO chain (which contains large struct dso
objects) by these functions is replaced with a new chain of struct
tls_module objects containing only the information needed for
implementing TLS. this may also yield some performance benefit
initializing TLS for a new thread when a large number of modules
without TLS have been loaded, since since there is no need to walk
structures for modules without TLS.
|
|
use weak definitions that the dynamic linker can override instead of
preprocessor conditionals on SHARED so that the same libc start and
exit code can be used for both static and dynamic linking.
|
|
this was only a tiny optimization, and static-linked binaries should
not be calling __tls_get_addr anyway since the linker is supposed to
perform relaxation, resulting in use of the local-exec TLS model.
|
|
this is the first and simplest stage of removal of the SHARED macro,
which will eventually allow libc.a and libc.so to be produced from the
same object files.
the original motivation for these #ifdefs which are now being removed
was to allow building a static-only libc using a compiler that does
not support visibility. however, SHARED was the wrong condition to
test for this anyway; various assembly-language sources refer to
hidden symbols and declare them with the .hidden directive, making it
wrong to define the referenced symbols as non-hidden. if there is a
need in the future to build libc using compilers that lack visibility,
support could be moved to the build system or perhaps the __PIC__
macro could be checked instead of SHARED.
|
|
when adding the fdpic subarchs, the need for these sub files was
overlooked. thus setjmp and longjmp performed illegal instructions.
|
|
on linux/nommu, non-writable private mappings of files may actually
use memory shared with other processes or the fs cache. the old nommu
loader code (used when mmap with MAP_FIXED fails) simply wrote over
top of the original file mapping, possibly clobbering this shared
memory. no such breakage was observed in practice, but it should have
been possible.
the new code starts by mapping anonymous writable memory on archs that
might support nommu, then maps load segments over top of it, falling
back to read if MAP_FIXED fails. we use an anonymous map rather than a
writable file map to avoid reading more data from disk than needed.
since pages cannot be loaded lazily on fault, in case of large
data/bss, mapping the full file may read a lot of data that will
subsequently be thrown away when processing additional LOAD segments.
as a result, we cannot skip the first LOAD segment when operating in
this mode.
these changes affect only non-FDPIC nommu support.
|
|
it was wrongly returning a null pointer instead of an empty string.
|
|
these files are all accepted as legacy arm syntax when producing arm
code, but legacy syntax cannot be used for producing thumb2 with
access to the full ISA. even after switching to UAL, some asm source
files contain instructions which are not valid in thumb mode, so these
will need to be addressed separately.
|
|
the idea of the three-instruction sequence being removed was to be
able to return to thumb code when used on armv4t+ from a thumb caller,
but also to be able to run on armv4 without the bx instruction
available (in which case the low bit of lr would always be 0).
however, without compiler support for generating such a sequence from
C code, which does not exist and which there is unlikely to be
interest in implementing, there is little point in having it in the
asm, and it would likely be easier to add pre-armv4t support via
enhanced linker handling of R_ARM_V4BX than at the compiler level.
removing this code simplifies adding support for building libc in
thumb2-only form (for cortex-m).
|
|
the code to save/restore vfp registers needs to build even when the
configured target does not have fpu; this is because code using vfp
fpu (but with the standard soft-float EABI) may call a libc built for
a soft-float only, and the EABI considers these registers call-saved
when they exist. thus, extra directives are used to force the
assembler to allow vfp instructions and to avoid marking the resulting
object files as requiring vfp.
moving away from using hard-coded opcode words is necessary in order
to eventually support producing thumb2-only output for cortex-m.
conditional execution of these instructions based on hwcap flags was
already implemented. when building for arm (non-thumb) output, the
only currently-supported configuration, this commit does not change
the code emitted.
|
|
mrc/mcr p10 coprocessor mnemonics are deprecated by some
toolchains.
|
|
contrary to commit 9367fe926196f407705bb07cd29c6e40eb1774dd, all
relevant gas versions actually do support .syntax unified.
|
|
this function is used only as a weak definition for malloc, for static
linking in programs which do not call realloc or free. since it had
external linkage and was thereby exported in libc.so's dynamic symbol
table, --gc-sections was unable to drop it. this was merely an
oversight; there's no reason for it to be external, so make it static.
|
|
since mremap with the MREMAP_FIXED flag is an operation that unmaps
existing mappings, it needs to use the vm lock mechanism to ensure
that any in-progress synchronization operations using vm identities
from before the call have finished.
also, the variadic argument was erroneously being read even if the
MREMAP_FIXED flag was not passed. in practice this didn't break
anything, but it's UB and in theory LTO could turn it into a hard
error.
|
|
It's quite feasible for this to happen via MREMAP_MAYMOVE.
|
|
previously, only archs that needed to do stack cleanup defined a
__cp_cancel label for acting on cancellation in their syscall asm, and
a default definition was provided by a weak alias to __cancel, the C
function. this resulted in wrong codegen for arm on gcc versions
affected by pr 68178 and possibly similar issues (like pr 66609) on
other archs, and also created an inconsistency where the __cp_begin
and __cp_end labels were treated as const data but __cp_cancel was
treated as a function. this in turn caused incorrect code generation
on archs where function pointers point to function descriptors rather
than code (for now, only sh/fdpic).
|
|
using the actual mcontext_t definition rather than an overlaid pointer
array both improves correctness/readability and eliminates some ugly
hacks for archs with 64-bit registers bit 32-bit program counter.
also fix UB due to comparison of pointers not in a common array
object.
|
|
when a library being loaded has bss (i.e. data segment with
p_memsz>p_filesz), this region needs to be zeroed with a combination
of memset and/or mmap. the regular ELF loader always did this but the
FDPIC code path omitted it, leading to objects in bss having
uninitialized/junk contents.
|
|
getnameinfo() compares the size of the given struct sockaddr with
sizeof(struct sockaddr_in) and sizeof(struct sockaddr_in6) depending on
the net family. When you add a sockaddr of size sizeof(struct
sockaddr_storage) this function will fail because the size of the
sockaddr is too big. Change the check that it only fails if the size is
too small, but make it work when it is too big for example when someone
calls this function with a struct sockaddr_storage and its size.
This fixes a problem with IoTivity 1.0.0 and musl.
glibc and bionic are only failing if it is smaller, net/freebsd
implemented the != check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
previously, transient failures like fd exhaustion or other
resource-related errors were treated the same as non-existence of
these files, leading to fallbacks or false-negative results. in
particular:
- failure to open hosts resulted in fallback to dns, possibly yielding
EAI_NONAME for a hostname that should be defined locally, or an
unwanted result from dns that the hosts file was intended to
replace.
- failure to open services resulted in EAI_SERVICE.
- failure to open resolv.conf resulted in querying localhost rather
than the configured nameservers.
now, only permanent errors trigger the fallback behaviors above; all
other errors are reportable to the caller as EAI_SYSTEM.
|
|
the buffer enlargement logic here accounted for the terminating null
byte, but not for the possibility of hitting the delimiter in the
buffer-refill code path that uses getc_unlocked, in which case two
additional bytes (the delimiter and the null termination) are written
without another chance to enlarge the buffer.
this patch and the corresponding bug report are by Felix Janda.
|
|
Some armhf gcc toolchains (built with --with-float=hard but without
--with-fpu=vfp*) do not pass -mfpu=vfp to the assembler and then
binutils rejects the UAL mnemonics for VFP unless there is an .fpu vfp
directive in the asm source.
|
|
POSIX requires pthread_join to synchronize memory on success. The
futex wait inside __timedwait_cp cannot handle this because it's not
called in all cases. Also, in the case of a spurious wake, tid can
become zero between the wake and when the joining thread checks it.
|
|
when determining which module an address belongs to, all function
descriptor ranges must be checked first, in case the allocated memory
falls inside another module's memory range.
dladdr itself must also check addresses against function descriptors
before doing a best-match search against the symbol table. even when
doing the latter (e.g. for code addresses obtained from mcontext_t),
also check whether the best-match was a function, and if so, replace
the result with a function descriptor address. which is the nominal
"base address" of the function and which the caller needs if it
intends to subsequently call the matching function.
|
|
since commits 2907afb8dbd4c1d34825c3c9bd2b41564baca210 and
6fc30c2493fcfedec89e45088bea87766a1e3286, __dls2 is no longer called
via symbol lookup, but instead uses relative addressing that needs to
be resolved at link time. on some linker versions, and/or if
-Bsymbolic-functions is not used, the linker may leave behind a
dynamic relocation, which is not suitable for bootstrapping the
dynamic linker, if the reference to __dls2 is marked hidden but the
definition is not actually hidden. correcting the definition to use
hidden visibility fixes the problem.
the static-PIE entry point rcrt1 was likewise affected and is also
fixed by this patch.
|
|
strftime results are unspecified in this case, but should not invoke
undefined behaviour.
tm_wday, tm_yday, tm_mon and tm_year fields were used in signed int
arithmetic that could overflow.
based on patch by Szabolcs Nagy.
|
|
as found and reported by Brian Mastenbrook, the expressions
400*qc_cycles and years+100 in __secs_to_tm were both subject to
integer overflow for extreme values of the input t.
this patch by Szabolcs Nagy fixes the code by switching to larger
types, and matches the original intent I had in mind when writing this
code.
|
|
the specification for these functions requires that the buffer/size
exposed to the caller be valid after any successful call to fflush or
fclose on the stream. the implementation's approach is to update them
only at flush time, but that misses the case where fflush or fclose is
called without any writes having taken place, in which case the write
flushing callback will not be called.
to fix both the observable bug and the desired invariant, setup empty
buffers at open time and fail the open operation if no memory is
available.
|
|
commit 844212d94f582c4e3c5055e0a1524931e89ebe76, which did not make it
into any releases, changed nl_langinfo(CODESET) to always return
"UTF-8", even in the byte-based C locale. this was problematic because
application software was found to use the string match for "UTF-8" to
activate its own UTF-8 processing. this both undermines the byte-based
functionality of the C locale, and if mixed with with calls to the
standard multibyte functions, which happened in practice, could result
in severe mis-handling of input.
the motive for the previous change was that, to avoid widespread
compatibility problems, the string returned by nl_langinfo(CODESET)
needs to be accepted by iconv and by third-party character conversion
code. thus, the only remaining choice is "ASCII". this choice
accurately represents the intent that high bytes do not have
individual meaning in the C locale, but it does mean that iconv, when
passed nl_langinfo(CODESET) in the C locale, will produce errors in
cases where mbrtowc would have succeeded. for reference, glibc behaves
similarly in this regard, so I don't think it will be a problem.
|
|
patch by Anand Takale.
|
|
some newer binutils versions print scary warnings about protected data
because most gcc versions fail to produce the right address
references/relocations for such data that might be subject to copy
relocations. originally vis.h explicitly assigned default visibility
to all public data symbols to avoid this issue, but commit
b8dda24fe1caa901a99580f7a52defb95aedb67c removed this treatment for
stdin/out/err to work around a gcc 3.x bug, and since they don't
actually need it (because taking their addresses is not valid C).
instead, a check for the gcc 3.x bug is added to the configure check
for vis.h preinclude support; this feature will simply be disabled
when using a buggy version of gcc.
|
|
previously, __lookup_ipliteral only checked its argument against the
requested address family, so IPv4 literals passed through to
__lookup_name if the caller asked for only IPv6 results, and likewise
for IPv6 literals when the caller asked for only IPv4. this resulted
in spurious DNS lookups that reportedly even succeeded with some
nameservers.
now, __lookup_ipliteral attempts to parse its argument as both IPv4
and IPv6, and returns an error (to stop further search) rather than 0
(no results yet) if the form of the argument mismatches the requested
address family.
based on patch by Julien Ramseier.
|
|
this case is specified as a mandatory ("shall fail") error.
based on patch by Julien Ramseier.
|
|
per ISO C, CHAR_MAX, not -1, is the value used to indicate that a char
field in struct lconv is unavailable.
patch by Julien Ramseier.
|
|
The value of *size is not relevant in case of failure, but it's
better not to copy garbage from the stack into it.
(The compiler cannot see through the syscall, so optimization
was not affected by the unspecified value).
|
|
The error code of an allocating function was not checked in tre_add_tag.
|
|
the restorer function pointer provided in the kernel sigaction
structure is interpreted by the kernel as a raw code address, not a
function descriptor.
this commit moves the declarations of the __restore and __restore_rt
symbols to ksigaction.h so that arch versions of the file can override
them, and introduces a version for sh which declares them as objects
rather than functions.
an alternate solution would have been defining SA_RESTORER to 0 so
that the functions are not used, but this both requires executable
stack (since the sh kernel does not have a vdso page with permanent
restorer functions) and crashes on qemu user-level emulation.
|
|
lookup the dso an address falls in based on the loadmap and not just a
base/length. fix the main app's fake loadmap used when loaded by a
non-fdpic-aware loader so that it does not cover the whole memory
space.
function descriptor addresses are also matched for future use by
dladdr, but reverse lookups of function descriptors via dladdr have
not been implemented yet. some revisions may be needed in the future
once reclaim_gaps supports fdpic, so that function descriptors
allocated in reclaimed heap space do not get detected as belonging to
the module whose gaps they were allocated in.
|
|
previously these resolved to the code address rather than the address
of the function descriptor.
the conditions for accepting or rejecting symbols are quite
inconsistent between the different points in the dynamic linker code
where such decisions are made. this commit attempts to be at least as
correct as anything already there, but does not improve consistency.
it has been tested to correctly avoid symbols that are merely
references to functions defined in other modules, at least in simple
usage, but at some point all symbol lookup logic should be reviewed
and refactored/unified.
|
|
this change is needed to be compatible with fdpic, where some of the
main application's relocations may be performed as part of the crt1
entry point. if we call init functions before passing control, these
relocations will not yet have been performed, and the init code will
potentially make use of invalid pointers.
conceptually, no code provided by the application or third-party
libraries should run before the application entry point. the
difference is not observable to programs using the crt1 we provide,
but it could come into play if custom entry point code is used, so
it's better to be doing this right anyway.
|
|
a mistaken #ifdef instead of #if caused conversion of code addresses
to function descriptors to be performed even on non-fdpic.
|
|
|
|
previously, the normal ELF library loading code was used even for
fdpic, so only the kernel-loaded dynamic linker and main app could
benefit from separate placement of segments and shared text.
|
|
at this point not all functionality is complete. the dynamic linker
itself, and main app if it is also loaded by the kernel, take
advantage of fdpic and do not need constant displacement between
segments, but additional libraries loaded by the dynamic linker follow
normal ELF semantics for mapping still. this fully works, but does not
admit shared text on nommu.
in terms of actual functional correctness, dlsym's results are
presently incorrect for function symbols, RTLD_NEXT fails to identify
the caller correctly, and dladdr fails almost entirely.
with the dynamic linker entry point working, support for static pie is
automatically included, but linking the main application as ET_DYN
(pie) probably does not make sense for fdpic anyway. ET_EXEC is
equally relocatable but more efficient at representing relocations.
|
|
the fdpic code will need to count symbols, and it may be useful
elsewhere in the future too. counting is trivial as long as sysv hash
is present, but for gnu-hash-only libraries it's complex.
the behavior of the count is changed slightly: we now include symbols
that are not accessible by the gnu hash table in the count. this may
make dladdr slightly slower. if this is a problem, dladdr can subtract
out the part that should not be accessible. unlike in the old code,
subtracting this out is easy even in the fast path where sysv hash is
available too.
|
|
|
|
these were just missed in the previous commits.
|
|
|
|
|
