| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
until the mq notification event arrives, it is mandatory that signals
be blocked. otherwise, a signal can be received, and its handler
executed, in a thread which does not yet exist on the abstract
machine.
after the point of the event arriving, having signals blocked is not a
conformance requirement but a QoI requirement. while the application
can unblock any signals it wants unblocked in the event handler
thread, if they did not start out blocked, it could not block them
without a race window where they are momentarily unblocked, and this
would preclude controlled delivery or other forms of acceptance
(sigwait, etc.) anywhere in the application.
|
|
this avoids leaving behind transient resource consumption whose
cleanup is subject to scheduling behavior.
|
|
in the error path where the mq_notify syscall fails, the initiating
thread may have closed the socket before the worker thread calls recv
on it. even in the absence of such a race, if the recv call failed,
e.g. due to seccomp policy blocking it, the worker thread could
proceed to close, producing a double-close condition.
this can all be simplified by moving the mq_notify syscall into the
new thread, so that the error case does not require pthread_cancel.
now, the initiating thread only needs to read back the error status
after waiting for the worker thread to consume its arguments.
|
|
semaphores are a much lighter primitive, and more idiomatic with
current usage in the code base.
|
|
disabling cancellation around the pthread_join call seems to be the
safest and logically simplest fix. i believe it would also be possible
to just perform the unmap directly here after __tl_sync, removing the
dependency on pthread_join, but such an approach duplicately encodes a
lot more implementation assumptions.
|
|
the logic to check hwcap for SPE register file inadvertently clobbered
the val argument before use. switch to a different work register so
this doesn't happen.
|
|
Implement vfork() using clone(CLONE_VM | CLONE_VFORK | ...).
|
|
we wrongly defined a dummy SA_RESTORER flag on these archs, despite
the kernel interface not actually having such a feature. on archs
which lack SA_RESTORER, the kernel sigaction structure also lacks the
restorer function pointer member, which means the signal mask appears
at a different offset. the kernel was thereby interpreting the bits of
the code address as part of the signal set to be masked while handling
the signal.
this patch removes the erroneous SA_RESTORER definitions from archs
which do not have it, makes access to the member conditional on
whether SA_RESTORER is defined for the arch, and removes the
now-unused asm for the affected archs.
because there are reportedly versions of qemu-user which also use the
wrong ABI here, the old ksigaction struct size is preserved with an
unused member at the end. this is harmless and mitigates the risk of
such a bug turning into a buffer overflow onto the sigaction
function's stack.
|
|
mips has its own mechanisms for DT_DEBUG because it makes _DYNAMIC
read-only, and the original mechanism, DT_MIPS_RLD_MAP, was
PIE-incompatible. DT_MIPS_RLD_MAP_REL was added to remedy this, but we
never implemented support for it. add it now using the same idioms for
mips-specific ldso logic.
|
|
while no lock is held here making it a lock-order issue, replacement
malloc is likely to want to use pthread_atfork, possibly making the
call to malloc infinitely recursive.
even if not, there is no reason to prefer an application-provided
malloc here.
|
|
printf_core() runs twice, and during its first run, nl_arg is
uninitialized and must not be read. It gets initialized at the end of
the first run. Conversely, nl_type does not need to be set during the
second run, as its useful life has ended at that point, since the only
time it is read is during that exact same initialization. Therefore we
can simply alternate the assignments.
p and w do still need to get values assigned to them, since at least one
line in the same if-statement depends on that, but they can be dummy
values. arg does not need to be assigned, since in the first run, we
encounter a continue statement before using the argument.
|
|
because the has-waiters state in the semaphore value futex word is
only representable when the value is zero (the special value -1
represents "0 with potential new waiters"), it's lost if intervening
operations make the semaphore value positive again. this creates an
ABA issue in sem_post, whereby the post uses a stale waiters count
rather than re-evaluating it, skipping the futex wake if the stale
count was zero.
the fix here is based on a proposal by Alexey Izbyshev, with minor
changes to eliminate costly new spurious wake syscalls.
the basic idea is to replace the special value -1 with a sticky
waiters bit (repurposing the sign bit) preserved under both wait and
post. any post that takes place with the waiters bit set will perform
a futex wake.
to be useful, the waiters bit needs to be removable, and to remove it
safely, we perform a broadcast wake instead of a normal single-task
wake whenever removing the bit. this lets any un-accounted-for waiters
wake and re-add the waiters bit if they still need it.
there are multiple possible choices for when to perform this
broadcast, but the optimal choice seems to be doing it whenever the
observed waiters count is less than two (semantically, this means
exactly one, but we might see a stale count of zero). in this case,
the expected number of threads to be woken is one, with exactly the
same cost as a non-broadcast wake.
|
|
POSIX requires pthread_atfork to report errors via its return value,
not via errno. The only specified error is ENOMEM.
|
|
the rule that longest digit sequence not beginning with a zero is
greater only applies when both sequences being compared are
non-degenerate. this is spelled out explicitly in the man page, which
may be deemed authoritative for this nonstandard function: "If one or
both of these is empty, then return what strcmp(3) would have
returned..."
we were wrongly treating any sequence of digits not beginning with a
zero as greater than a non-digit in the other string.
|
|
if async cancellation is enabled and acted upon, the stack pointer is
not necessarily pointing to a __syscall_cp_asm stack frame. the
contents of the stack being wrong don't really matter, but if the
stack pointer is not suitably aligned, the procedure call ABI is
violated when calling back into C code via __cancel, and pthread_exit,
cancellation cleanup handlers, TSD destructors, etc. may malfunction
or crash.
for the async cancel case, just call __cancel directly like we did
prior to commit 102f6a01e249ce4495f1119ae6d963a2a4a53ce5. restore the
signal mask prior to doing this since the cancellation handler runs
with all signals blocked.
|
|
commit f081d5336a80b68d3e1bed789cc373c5c3d6699b fixed
gethostbyname[2]_r to treat negative results as a non-error, leaving
gethostbyname[2] wrongly returning a pointer to the unfilled result
buffer rather than a null pointer. since, as documented with commit
fe82bb9b921be34370e6b71a1c6f062c20999ae0, the caller of
gethostby{name[2],addr}_r can always rely on the result pointer being
set, use that consistently rather than trying to duplicate logic about
whether we have a result or not in gethostby{name[2],addr}.
|
|
the only functional change here should be that MAXADDRS is only
checked for RRs that provide address results, so that a CNAME which
appears after an excessive number of address RRs does not get ignored.
I'm not aware of any servers that order the RRs this way, and it may
even be forbidden to do so, but I prefer having the callback logic not
be order dependent.
other than that, the motivation for this change is that the A and AAAA
cases were mostly duplicate code that could be combined as a single
code path.
|
|
returning -1 rather than 0 from the parse function causes __dns_parse
to bail out and return an error. presently, name_from_dns does not
check the return value anyway, so this does not matter, but if it ever
started treating this as an error, lookups with large numbers of
addresses would break. this is a consequence of adding TCP support and
extending the buffer size used in name_from_dns.
|
|
reportedly there is nameserver software with question-rewriting
"functionality" which gives A answers when AAAA is queried. since we
made no effort to validate that the answer RR type actually
corresponds to the question asked, it was possible (depending on
flags, etc.) for these answers to leak through, which the caller might
not be prepared for. indeed, our implementation of gethostbyname2_r
makes an assumption that the resulting addresses are in the family
requested, and will misinterpret the results if they don't.
commit 45ca5d3fcb6f874bf5ba55d0e9651cef68515395 already noted in
fixing CVE-2017-15650 that this could happen, but did nothing to
validate that the RR type of the answer matches the question; it just
enforced the limit on number of results to preclude overflow.
presently, name_from_dns ignores the return value of __dns_parse, so
it doesn't really matter whether we return 0 (ignoring the RR) or -1
(parse-ending error) upon encountering the mismatched RR. if that ever
changes, though, ignoring irrelevant answer RRs sounds like the
semantically correct thing to do, so for now let's return 0 from the
callback when this happens.
|
|
commit 167390f05564e0a4d3fcb4329377fd7743267560 seems to have
overlooked the presence of a lock here, probably because it was one of
the exceptions not using LOCK() but a rwlock.
as such, it can't be added to the generic table of locks to take, so
add an explicit atfork function for the pthread keys table. the order
it is called does not particularly matter since nothing else in libc
but pthread_exit interacts with keys.
|
|
performing n-- is not a safe operation for arbitrary signed input n.
only perform the decrement in the code path where the initial n is
greater than 1, and adjust the condition in the n<=1 code path to
compensate for it not having been decremented.
|
|
the aio operations that lead to calling __aio_get_queue with the
possibility to expand the fd map are not AS-safe, but if they are
interrupted by a signal handler, the signal handler may call close,
which is required to be AS-safe. due to __aio_get_queue taking the
write lock without blocking signals, such a call to close from a
signal handler could deadlock.
change __aio_get_queue to block signals if it needs to obtain a write
lock, and restore when finished.
|
|
aio_suspend waits on a dummy futex in the corner case when the array of
requests contains NULL pointers only. But the value of this futex was
left uninitialized, so if it happens to be non-zero, aio_suspend
degrades to spinning instead of blocking.
|
|
as reported by Alexey Izbyshev, there is a lock order inversion
deadlock between the malloc lock and aio maplock at MT-fork time:
_Fork attempts to take the aio maplock while fork already has the
malloc lock, but a concurrent aio operation holding the maplock may
attempt to allocate memory.
move the __aio_atfork calls in the parent from _Fork to fork, and
reorder the lock before most other locks, since nothing else depends
on aio(*). this leaves us with the possibility that the child will not
be able to obtain the read lock, if _Fork is used directly and happens
concurrent with an aio operation. however, in that case, the child
context is an async signal context that cannot call any further aio
functions, so all we need is to ensure that close does not attempt to
perform any aio cancellation. this can be achieved just by nulling out
the map pointer.
(*) even if other functions call close, they will only need a read
lock, not a write lock, and read locks being recursive ensures they
can obtain it. moreover, the number of read references held is bounded
by something like twice the number of live threads, meaning that the
read lock count cannot saturate.
|
|
as reported by Alexey Izbyshev, when the second-to-last thread exits
causing a return to single-threaded (no locks needed) state, it
creates a situation where the last remaining thread may obtain the
killlock that's already held by the exiting thread. this means it may
erroneously use the tid of the exiting thread, and may corrupt the
lock state due to double-unlock.
commit 8d81ba8c0bc6fe31136cb15c9c82ef4c24965040, which (re)introduced
the switch back to single-threaded state, documents the intent that
the first lock after switching back should provide the necessary
synchronization. this is correct, but only works if the switch back is
made after there is no further need for synchronization with locks
(other than the thread list lock, which can't be bypassed) held by the
exiting thread.
in order to hit the bug, the remaining thread must first take a
different lock, causing it to perform an actual lock one last time,
consume the need_locks==-1 state, and transition to need_locks==0.
after that, the next attempt to lock the exiting thread's killlock
will bypass locking.
fix this by reordering the unlocking of killlock at thread exit time,
along with changes to the state protected by it, to occur earlier,
before the switch to single-threaded state. there are really no
constraints on where it's done, except that it occur after there is no
longer any possibility of application code executing in the exiting
thread, so do it as early as possible.
|
|
ever since commit 8f11e6127fe93093f81a52b15bb1537edc3fc8af introduced
the thread list lock, this has been wrong. initially, it was wrong via
calling free from the context with the thread list lock held. commit
aa5a9d15e09851f7b4a1668e9dbde0f6234abada deferred the unsafe free but
added a lock, which was also unsafe. in particular, it could deadlock
if code holding freebuf_queue_lock was interrupted by a signal handler
that takes the thread list lock.
commit 4d5aa20a94a2d3fae3e69289dc23ecafbd0c16c4 observed that there
was a lock here but failed to notice that it's invalid.
there is no easy solution to this problem with locks; any attempt at
solving it while still using locks would require the lock to be an
AS-safe one (blocking signals on each access to the dlerror buffer
list to check if there's deferred free work to be done) which would be
excessively costly, and there are also lock order considerations with
respect to how the lock would be handled at fork.
instead, just use an atomic list.
|
|
the entire intent of using madvise/MADV_FREE on freed slots is to
improve system performance by avoiding evicting cache of useful data,
or swapping useless data to disk, by marking any whole pages in the
freed slot as discardable by the kernel. in particular, unlike
unmapping the memory or replacing it with a PROT_NONE region, use of
MADV_FREE does not make any difference to memory accounting for commit
charge purposes, and so does not increase the memory available to
other processes in a non-overcommitted environment.
however, various measurements have shown that inordinate amounts of
time are spent performing madvise syscalls in processes which
frequently allocate and free medium sized objects in the size range
roughly between PAGESIZE and MMAP_THRESHOLD, to the point that the net
effect is almost surely significant performance degredation. so, turn
it off.
the code, which has some nontrivial logic for efficiently determining
whether there is a whole-page range to apply madvise to, is left in
place so that it can easily be re-enabled if desired, or later tuned
to only apply to certain sizes or to use additional heuristics.
|
|
originally the namespace-infringing "large file support" interfaces
were included as part of glibc-ABI-compat, with the intent that they
not be used for linking, since our off_t is and always has been
unconditionally 64-bit and since we usually do not aim to support
nonstandard interfaces when there is an equivalent standard interface.
unfortunately, having the symbols present and available for linking
caused configure scripts to detect them and attempt to use them
without declarations, producing all the expected ill effects that
entails.
as a result, commit 2dd8d5e1b8ba1118ff1782e96545cb8a2318592c was made
to prevent this, using macros to redirect the LFS64 names to the
standard names, conditional on _GNU_SOURCE or _LARGEFILE64_SOURCE.
however, this has turned out to be a source of further problems,
especially since g++ defines _GNU_SOURCE by default. in particular,
the presence of these names as macros breaks a lot of valid code.
this commit removes all the LFS64 symbols and replaces them with a
mechanism in the dynamic linker symbol lookup failure path to retry
with the spurious "64" removed from the symbol name. in the future,
if/when the rest of glibc-ABI-compat is moved out of libc, this can be
removed.
|
|
we already attempt to preclude this case by having res_send use a
sufficiently large temporary buffer even if the caller did not provide
one as large as or larger than the udp dns max of 512 bytes. however,
it's possible that the caller passed a custom-crafted query packet
using EDNS0, e.g. to get detailed DNSSEC results, with a larger udp
size allowance.
I have also seen claims that there are some broken nameservers in the
wild that do not honor the dns udp limit of 512 and send large answers
without the TC bit set, when the query was not using EDNS.
we generally don't aim to support broken nameservers, but in this case
both problems, if the latter is even real, have a common solution:
using recvmsg instead of recvfrom so we can examine the MSG_TRUNC
flag.
|
|
the size of 512 is not sufficient to get at least one address in the
worst case where the name is at or near max length and resolves to a
CNAME at or near max length. prior to tcp fallback, there was nothing
we could do about this case anyway, but now it's fixable.
the new limit 768 is chosen so as to admit roughly the number of
addresses with a worst-case CNAME as could fit for a worst-case name
that's not a CNAME in the old 512-byte limit. outside of this
worst-case, the number of addresses that might be obtained is
increased.
MAXADDRS (48) was originally chosen as an upper bound on the combined
number of A and AAAA records that could fit in 512-byte packets (31
and 17, respectively). it is not increased at this time.
so as to prevent a situation where the A records consume almost all of
these slots (at 768 bytes, a "best-case" name can fit almost 47 A
records), the order of parsing is swapped to process AAAA first. this
ensures roughly half of the slots are available to each address
family.
|
|
tcp fallback was originally deemed unwanted and unnecessary, since we
aim to return a bounded-size result from getaddrinfo anyway and
normally plenty of address records fit in the 512-byte udp dns limit.
however, this turned out to have several problems:
- some recursive nameservers truncate by omitting all the answers,
rather than sending as many as can fit.
- a pathological worst-case CNAME for a worst-case name can fill the
entire 512-byte space with just the two names, leaving no room for
any addresses.
- the res_* family of interfaces allow querying of non-address records
such as TLSA (DANE), TXT, etc. which can be very large. for many of
these, it's critical that the caller see the whole RRset. also,
res_send/res_query are specified to return the complete, untruncated
length so that the caller can retry with an appropriately-sized
buffer. determining this is not possible without tcp.
so, it's time to add tcp fallback.
the fallback strategy implemented here uses one tcp socket per
question (1 or 2 questions), initiated via tcp fastopen when possible.
the connection is made to the nameserver that issued the truncated
answer. right now, fallback happens unconditionally when truncation is
seen. this can, and may later be, relaxed for queries made by the
getaddrinfo system, since it will only use a bounded number of results
anyway.
retry is not attempted again after failure over tcp. the logic could
easily be adapted to do that, but it's of questionable value, since
the tcp stack automatically handles retransmission and the successs
answer with TC=1 over udp strongly suggests that the nameserver has
the full answer ready to give. further retry is likely just "take
longer to fail".
|
|
for extremely small buffer sizes, the DNS query core in __res_msend
may malfunction completely, being unable to get even the headers to
determine the response code. but there is also a problem for
reasonable sizes under 512 bytes: __res_msend is unable to determine
if the udp answer was truncated at the recv layer, in which case it
may be incomplete, and res_send is then unable to honor its contract
to return the length of the full, non-truncated answer.
at present, res_send does not honor that contract anyway when the full
answer would exceed 512 bytes, since there is no tcp fallback, but
this change at least makes it consistent in a context where this is
the only "full answer" to be had.
|
|
this is groundwork for TCP fallback support, but does not itself
change behavior in any way.
|
|
this was apparently omitted long ago out of a lack of understanding of
its importance and the fact that POSIX doesn't specify it. despite not
being officially standardized, however, it turns out that at least
AIX, glibc, NetBSD, OpenBSD, QNX, and Solaris document and support it.
in certain usage cases, such as implementing a DNS gateway on top of
the stub resolver interfaces, it's necessary to distinguish the case
where a name does not exit (NxDomain) from one where it exists but has
no addresses (or other records) of the requested type (NODATA). in
fact, even the legacy gethostbyname API had this distinction, which we
were previously unable to support correctly because the backend lacked
it.
apart from fixing an important functionality gap, adding this
distinction helps clarify to users how search domain fallback works
(falling back in cases corresponding to EAI_NONAME, not in ones
corresponding to EAI_NODATA), a topic that has been a source of
ongoing confusion and frustration.
as a result of this change, EAI_NONAME is no longer a valid universal
error code for getaddrinfo in the case where AI_ADDRCONFIG has
suppressed use of all address families. in order to return an accurate
result in this case, getaddrinfo is modified to still perform at least
one lookup. this will almost surely fail (with a network error, since
there is no v4 or v6 network to query DNS over) unless a result comes
from the hosts file or from ip literal parsing, but in case it does
succeed, the result is replaced by EAI_NODATA.
glibc has a related error code, EAI_ADDRFAMILY, that could be used for
the AI_ADDRCONFIG case and certain NODATA cases, but distinguishing
them properly in full generality seems to require additional DNS
queries that are otherwise not useful. on glibc, it is only used for
ip literals with mismatching family, not for DNS or hosts file results
where the name has addresses only in the opposite family. since this
seems misleading and inconsistent, and since EAI_NODATA already covers
the semantic case where the "name" exists but doesn't have any
addresses in the requested family, we do not adopt EAI_ADDRFAMILY at
this time. this could be changed at some point if desired, but the
logic for getting all the corner cases with AI_ADDRCONFIG right is
slightly nontrivial.
|
|
EAI_MEMORY is not possible (but would not provide errno if it were)
and EAI_FAIL does not provide errno. treat the latter as EBADMSG to
match how it's handled in gethostbyname2_r (it indicates erroneous or
failure response from the nameserver).
|
|
EAI_MEMORY is not possible because the resolver backend does not
allocate. if it did, it would be necessary for us to explicitly return
ENOMEM as the error, since errno is not guaranteed to reflect the
error cause except in the case of EAI_SYSTEM, so the existing code was
not correct anyway.
|
|
these functions are horribly underspecified, inconsistent between
historical systems, and should never have been included. however, the
signatures we have match the glibc ones, and the glibc behavior is to
treat NxDomain and NODATA results as a success condition, not an
ENOENT error.
|
|
this distinction only affects search, but allows search to continue
when concatenating one of the search domains onto the requested name
produces a result that's not valid. this can happen when the
concatenation is too long, or one of the search list entries is
itself not valid.
as a consequence of this change, having "." in the search domains list
will now be ignored/skipped rather than making the lookup abort with
no results (due to producing a concatenation ending in ".."). this
behavior could be changed later if needed.
|
|
the main loop already errors out on zero-length labels within the
name, but terminates before having a chance to check for an erroneous
final zero-length label, instead producing a malformed query packet
with a '.' byte instead of the terminating zero.
rather than poke at the look logic, simply detect this condition early
and error out without doing anything.
this also fixes behavior of getaddrinfo when "." appears in the search
domain list, which produces a name ending in ".." after concatenation,
at least in the sense of no longer emitting malformed packets on the
network. however, due to other issues, the lookup will still fail.
|
|
After commit 5b74eed3b301e2227385f3bf26d3bb7c2d822cf8 the timer thread
doesn't check whether timer_create() actually created the timer,
proceeding to wait for a signal that might never arrive. We can't fix
this by simply checking for a negative timer_id after
pthread_barrier_wait() because we have no way to distinguish a timer
creation failure and a request to delete a timer with INT_MAX id if it
happens to arrive quickly (a variation of this bug existed before
5b74eed3b301e2227385f3bf26d3bb7c2d822cf8, where the timer would be
leaked in this case). So (ab)use cancel field of pthread_t instead.
|
|
commit 4486c579cbf0d989080705f515d08cb48636ba88 disabled vdso
clock_gettime on arm due to a Linux kernel bug that was not understood
at the time, whereby the vdso function silently produced
catastrophically wrong results on some systems.
since then, the bug was tracked down to the way the arm kernel
disabled use of vdso clock_gettime on kernels where the necessary
timer was not available or was disabled. it simply patched out the
symbols, but it only did this for the legacy time32 functions, and
left the time64 function in place but non-operational. kernel commit
4405bdf3c57ec28d606bdf5325f1167505bfdcd4 (first present in 5.8)
provided the fix.
if this were a bug that impacted all users of the broken kernel
versions, we could probably ignore it and assume it had been patched
or replaced. however, it's very possible that these kernels appear in
the wild in devices running time32 userspace (glibc, musl 1.1.x, or
some other environment) where they appear to work fine, but where our
new binaries would fail catastrophically if we used the time64 vdso
function.
since the kernel has not (yet?) given us a way to probe for the
working time64 vdso function semantically, we work around the problem
by refusing to use the time64 one unless the time32 one is also
present. this will revert to not using vdso at all if the time32 one
is ever removed, but at least that's safe against wrong results and is
just a missed optimization.
|
|
open_wmemstream's write method was written assuming no buffering,
since it sets the FILE up with buf_len of zero in order to avoid
issues with position/seeking. however, as a consequence of commit
bd57e2b43a5b56c00a82adbde0e33e5820c81164, a FILE being written to by
the printf core has a temporary local buffer for the duration of the
operation if it was unbuffered to begin with. since this was
disregarded by the wide memstream's write method, output produced
through this code path, particularly numeric fields, was missing from
the output wchar buffer.
copy the equivalent logic for using the buffered data from the
byte-oriented open_memstream.
|
|
if resolv.conf lists no nameservers at all, the default of 127.0.0.1
is used. however, another "no nameservers" case arises where the
system has ipv6 support disabled/configured-out and resolv.conf only
contains v6 nameservers. this caused the resolver to repeat socket
operations that will necessarily fail (sending to one or more
wrong-family addresses) while waiting for a timeout.
it would be contrary to configured intent to query 127.0.0.1 in this
case, but the current behavior is not conducive to diagnosing the
configuration problem. instead, fail immediately with EAI_SYSTEM and
errno==EAFNOSUPPORT so that the configuration error is reportable.
|
|
use the legacy constant values if the kernel does not provide
AT_MINSIGSTKSZ (__getauxval will return 0 in this case) and as a
safety check if something is wrong and the provided value is less than
the legacy constant.
sysconf(_SC_SIGSTKSZ) returns SIGSTKSZ adjusted for the difference
between the legacy constant MINSIGSTKSZ and the runtime value, so that
the working space the application has on top of the minimum remains
invariant under changes to the minimum.
|
|
as a result of ISA extensions exploding register file sizes on some
archs, using a constant for minimum signal stack size no longer seems
viably future-proof. add sysconf keys allowing the kernel to provide a
machine-dependent minimum applications can query to ensure they
allocate sufficient space for stacks. the key names and indices align
with the same functionality in glibc.
see commit d5a5045382315e36588ca225889baa36ed0ed38f for previous
action on this subject.
ultimately, the macros MINSIGSTKSZ and SIGSTKSZ probably need to be
deprecated, but that is standards-amendment work outside the scope of
a single implementation.
|
|
apparently this code path was never tested, as it's not usual to have
v6 nameservers listed on a system without v6 networking support. but
it was always intended to work.
when reverting to binding a v4 address, also revert the family in the
sockaddr structure and the socklen for it. otherwise bind will just
fail due to mismatched family/sockaddr size.
fix dns resolver fallback when v6 nameservers are listed by
|
|
This is a part of the interface contract defined in the Linux man
page (official for a Linux-specific interface) and asserted by test
cases in the Linux Test Project (LTP).
|
|
a request for this behavior has been open for a long time. the
motivation is that application code, particularly under some language
runtimes designed around very-low-footprint coroutine type constructs,
may be operating with extremely small stack sizes unsuitable for
receiving signals, using a separate signal stack for any signals it
might handle.
progress on this was blocked at one point trying to determine whether
the implementation is actually entitled to clobber the alt stack, but
the phrasing "available to the implementation" in the POSIX spec for
sigaltstack seems to make it clear that the application cannot rely on
the contents of this memory to be preserved in the absence of signal
delivery (on the abstract machine, excluding implementation-internal
signals) and that we can therefore use it for delivery of signals that
"don't exist" on the abstract machine.
no change is made for SIGTIMER since it is always blocked when used,
and accepted via sigwaitinfo rather than execution of the signal
handler.
|
|
this is a requirement of the C language (orientation) and POSIX
(encoding rule) that was somehow overlooked.
we rely on the fact that the buffer pointers have been reset by
fflush, so that any future stdio operations on the stream will go
through the same code paths they would on a newly-opened file without
an orientation set, thereby setting the orientation as they should.
|
|
this resolves DT_RELR relocations in non-ldso, dynamic-linked objects.
|
