diff options
| -rw-r--r-- | system/kbd/APKBUILD | 32 | ||||
| -rw-r--r-- | system/kbd/consolefont.confd | 20 | ||||
| -rw-r--r-- | system/kbd/consolefont.initd | 70 | ||||
| -rw-r--r-- | system/kbd/keymaps.confd | 24 | ||||
| -rw-r--r-- | system/kbd/keymaps.initd | 77 | ||||
| -rw-r--r-- | system/openrc/0007-make-consolefont-service-compatible-with-busyboxs-se.patch | 70 | ||||
| -rw-r--r-- | system/openrc/APKBUILD | 11 |
7 files changed, 224 insertions, 80 deletions
diff --git a/system/kbd/APKBUILD b/system/kbd/APKBUILD index d54e7f29c..deb7fb205 100644 --- a/system/kbd/APKBUILD +++ b/system/kbd/APKBUILD @@ -2,9 +2,9 @@ # Maintainer: A. Wilcox <awilfox@adelielinux.org> pkgname=kbd pkgver=2.2.0_git20190823 -pkgrel=0 +pkgrel=1 pkgdesc="Console keyboard and font management utilities" -url=" " +url="https://kbd-project.org/" arch="all" options="!check" # padding error on at least ppc64 license="GPL-2.0+" @@ -12,8 +12,13 @@ depends="" checkdepends="check-dev" makedepends="linux-headers linux-pam-dev autoconf automake libtool" subpackages="$pkgname-doc $pkgname-fonts::noarch $pkgname-keymaps::noarch - $pkgname-lang" -source="https://dev.sick.bike/dist/$pkgname-$pkgver.tar.xz" + $pkgname-lang $pkgname-openrc" +source="https://dev.sick.bike/dist/$pkgname-$pkgver.tar.xz + consolefont.confd + consolefont.initd + keymaps.confd + keymaps.initd + " prepare() { default_prepare @@ -37,6 +42,19 @@ check() { package() { make DESTDIR="$pkgdir" install + + for i in consolefont keymaps; do + install -Dm644 "$srcdir"/$i.confd \ + "$pkgdir"/etc/conf.d/$i + install -Dm755 "$srcdir"/$i.initd \ + "$pkgdir"/etc/init.d/$i + done +} + +openrc() { + default_openrc + license="BSD-2-Clause" + replaces="openrc<0.24.1-r10" } fonts() { @@ -52,4 +70,8 @@ keymaps() { mv "$pkgdir"/usr/share/unimaps "$subpkgdir"/usr/share/ } -sha512sums="7f6202aeb17d6224095447a92d999478220457e1e7cadb90a7c40ca7f3b0c5b1f672db1995fb69652ca37558a75df582bfb5fea5772f3b1e040fe39f8f54504e kbd-2.2.0_git20190823.tar.xz" +sha512sums="7f6202aeb17d6224095447a92d999478220457e1e7cadb90a7c40ca7f3b0c5b1f672db1995fb69652ca37558a75df582bfb5fea5772f3b1e040fe39f8f54504e kbd-2.2.0_git20190823.tar.xz +19761fdd2b32c1bbcc9254b89b7893741e144b917a75410af3f274553fe61e2f56cbbd17ff77ac929e9377604663cbbfd9e53c73e7d41e71de6de573730950c7 consolefont.confd +1e67f75f27ec5de8f71489c83f78e53e8fd0925ae2d82dabf516f98905c5aff206a8e943e92b6af413eae5f0ecb9c2240526dfc3c56811a8dc1d19ced561bba3 consolefont.initd +af7d37fc6be1382414ca8245ca6f8d2ee8b82650b8a08eebbd980cf6dd2b92524fce2851ce0b2cd67e915488c12044ab50c5ab1f01c3072af87eed3e058ac268 keymaps.confd +510d7eb582a914fa7cfb868d0c3d55a21ee1519033117d0943a153528b5810d09f6421ddc02d93906c1a66fb7e07e86240f38dad0d38cfb5a8c7e9a6335a937f keymaps.initd" diff --git a/system/kbd/consolefont.confd b/system/kbd/consolefont.confd new file mode 100644 index 000000000..4c41d0633 --- /dev/null +++ b/system/kbd/consolefont.confd @@ -0,0 +1,20 @@ +# The consolefont service is not activated by default. If you need to +# use it, you should run "rc-update add consolefont boot" as root. +# +# consolefont specifies the default font that you'd like Linux to use on the +# console. You will have to install a package such as kbd-fonts or +# terminus-font to have a selection; they will be installed in +# /usr/share/consolefonts. +# +# The following (from terminus-font) is a good font for HiDPI screens. +#consolefont="ter-i32n" + +# consoletranslation is the charset map file to use. Leave commented to use +# the default one. Have a look in /usr/share/consoletrans for a selection of +# map files you can use. +#consoletranslation="8859-1_to_uni" + +# unicodemap is the unicode map file to use. Leave commented to use the +# default one. Have a look in /usr/share/unimaps (from the kbd-keymaps +# package) for a selection of map files you can use. +#unicodemap="iso01" diff --git a/system/kbd/consolefont.initd b/system/kbd/consolefont.initd new file mode 100644 index 000000000..63d8601c5 --- /dev/null +++ b/system/kbd/consolefont.initd @@ -0,0 +1,70 @@ +#!/sbin/openrc-run +# Copyright (c) 2007-2015 The OpenRC Authors. +# See the Authors file at the top-level directory of this distribution and +# https://github.com/OpenRC/openrc/blob/master/AUTHORS +# +# This file is part of OpenRC. It is subject to the license terms in +# the LICENSE file found in the top-level directory of this +# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE +# This file may not be copied, modified, propagated, or distributed +# except according to the terms contained in the LICENSE file. + +description="Sets a font for the consoles." + +depend() +{ + need localmount termencoding + after hotplug bootmisc modules + keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu +} + +start() +{ + ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}} + consolefont=${consolefont:-${CONSOLEFONT}} + unicodemap=${unicodemap:-${UNICODEMAP}} + consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}} + + if [ -z "$consolefont" ]; then + ebegin "Using the default console font" + eend 0 + return 0 + fi + + if [ "$ttyn" = 0 ]; then + ebegin "Skipping font setup (rc_tty_number == 0)" + eend 0 + return 0 + fi + + local x= param= sf_param= retval=0 ttydev=/dev/tty + + # Get additional parameters + if [ -n "$consoletranslation" ]; then + param="$param -m $consoletranslation" + fi + if [ -n "${unicodemap}" ]; then + param="$param -u $unicodemap" + fi + + # Set the console font + ebegin "Setting console font [$consolefont]" + [ -d /dev/vc ] && ttydev=/dev/vc/ + x=1 + while [ $x -le $ttyn ]; do + if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then + retval=1 + break + fi + : $(( x += 1 )) + done + eend $retval + + # Store the font so we can use it ASAP on boot + if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then + mkdir -p "$RC_LIBEXECDIR"/console + setfont -O "$RC_LIBEXECDIR"/console/font + fi + + return $retval +} diff --git a/system/kbd/keymaps.confd b/system/kbd/keymaps.confd new file mode 100644 index 000000000..9a2863413 --- /dev/null +++ b/system/kbd/keymaps.confd @@ -0,0 +1,24 @@ +# Use keymap to specify the default console keymap. There is a complete tree +# of keymaps in /usr/share/keymaps to choose from (from the kbd-keymaps +# package). +keymap="us" + +# Should we first load the 'windowkeys' console keymap? Most x86 users will +# say "yes" here. Note that non-x86 users should leave it as "no". +# Loading this keymap will enable VT switching (like ALT+Left/Right) +# using the special windows keys on the linux console. +windowkeys="NO" + +# The maps to load for extended keyboards. Most users will leave this as is. +extended_keymaps="" +#extended_keymaps="backspace keypad euro2" + +# Tell dumpkeys(1) to interpret character action codes to be +# from the specified character set. +# This only matters if you set unicode="yes" in /etc/rc.conf. +# For a list of valid sets, run `dumpkeys --help` +dumpkeys_charset="" + +# Some fonts map AltGr-E to the currency symbol instead of the Euro. +# To fix this, set to "yes" +fix_euro="NO" diff --git a/system/kbd/keymaps.initd b/system/kbd/keymaps.initd new file mode 100644 index 000000000..49e41b0e7 --- /dev/null +++ b/system/kbd/keymaps.initd @@ -0,0 +1,77 @@ +#!/sbin/openrc-run +# Copyright (c) 2007-2015 The OpenRC Authors. +# See the Authors file at the top-level directory of this distribution and +# https://github.com/OpenRC/openrc/blob/master/AUTHORS +# +# This file is part of OpenRC. It is subject to the license terms in +# the LICENSE file found in the top-level directory of this +# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE +# This file may not be copied, modified, propagated, or distributed +# except according to the terms contained in the LICENSE file. + +description="Applies a keymap for the consoles." + +depend() +{ + need localmount termencoding + after bootmisc + keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu +} + +start() +{ + ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}} + : ${unicode:=$UNICODE} + : ${keymap:=$KEYMAP} + : ${extended_keymaps:=$EXTENDED_KEYMAPS} + : ${windowkeys:=$SET_WINDOWSKEYS} + : ${fix_euro:=$FIX_EURO} + : ${dumpkeys_charset:=${DUMPKEYS_CHARSET}} + + if [ -z "$keymap" ]; then + eerror "You need to setup keymap in /etc/conf.d/keymaps first" + return 1 + fi + + local ttydev=/dev/tty n= + [ -d /dev/vc ] && ttydev=/dev/vc/ + + # Force linux keycodes for PPC. + if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ]; then + echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes + fi + + local wkeys= kmode="-a" msg="ASCII" + if yesno $unicode; then + kmode="-u" + msg="UTF-8" + fi + yesno $windowkeys && wkeys="windowkeys" + + # Set terminal encoding to either ASCII or UNICODE. + # See utf-8(7) for more information. + ebegin "Setting keyboard mode [$msg]" + n=1 + while [ $n -le $ttyn ]; do + kbd_mode $kmode -C $ttydev$n + : $(( n += 1 )) + done + eend 0 + + ebegin "Loading key mappings [$keymap]" + loadkeys -q $wkeys $keymap $extended_keymaps + eend $? "Error loading key mappings" || return $? + + if yesno $fix_euro; then + ebegin "Fixing font for euro symbol" + # Fix some fonts displaying the Euro, #173528. + echo "altgr keycode 18 = U+20AC" | loadkeys -q - + eend $? + fi + + # Save the keymapping for use immediately at boot + if checkpath -W "$RC_LIBEXECDIR"; then + mkdir -p "$RC_LIBEXECDIR"/console + dumpkeys >"$RC_LIBEXECDIR"/console/keymap + fi +} diff --git a/system/openrc/0007-make-consolefont-service-compatible-with-busyboxs-se.patch b/system/openrc/0007-make-consolefont-service-compatible-with-busyboxs-se.patch deleted file mode 100644 index 6c23e2ab0..000000000 --- a/system/openrc/0007-make-consolefont-service-compatible-with-busyboxs-se.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 3d0d2b89745597ea973129eafa3f999cf19d761f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?S=C3=B6ren=20Tempel?= <soeren+git@soeren-tempel.net> -Date: Wed, 17 Aug 2016 17:52:58 +0200 -Subject: [PATCH 7/7] make consolefont service compatible with busyboxs setfont - applet - -Compared to kdbs setfont program it doesn't support -O and -m. ---- - conf.d/consolefont | 11 ++--------- - init.d/consolefont.in | 7 ++----- - 2 files changed, 4 insertions(+), 14 deletions(-) - -diff --git a/conf.d/consolefont b/conf.d/consolefont -index e01ae842..75544b2f 100644 ---- a/conf.d/consolefont -+++ b/conf.d/consolefont -@@ -3,16 +3,9 @@ - # - # consolefont specifies the default font that you'd like Linux to use on the - # console. You can find a good selection of fonts in /usr/share/consolefonts; --# you shouldn't specify the trailing ".psf.gz", just the font name below. --# To use the default console font, comment out the CONSOLEFONT setting below. --consolefont="default8x16" -+consolefont="default8x16.psf.gz" - - # consoletranslation is the charset map file to use. Leave commented to use - # the default one. Have a look in /usr/share/consoletrans for a selection of - # map files you can use. --#consoletranslation="8859-1_to_uni" -- --# unicodemap is the unicode map file to use. Leave commented to use the --# default one. Have a look in /usr/share/unimaps for a selection of map files --# you can use. --#unicodemap="iso01" -+#consoletranslation="8859-1_to_uni.trans" -diff --git a/init.d/consolefont.in b/init.d/consolefont.in -index 9fe95afa..173ed426 100644 ---- a/init.d/consolefont.in -+++ b/init.d/consolefont.in -@@ -22,7 +22,6 @@ start() - { - ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}} - consolefont=${consolefont:-${CONSOLEFONT}} -- unicodemap=${unicodemap:-${UNICODEMAP}} - consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}} - - if [ -z "$consolefont" ]; then -@@ -43,9 +42,6 @@ start() - if [ -n "$consoletranslation" ]; then - param="$param -m $consoletranslation" - fi -- if [ -n "${unicodemap}" ]; then -- param="$param -u $unicodemap" -- fi - - # Set the console font - ebegin "Setting console font [$consolefont]" -@@ -63,7 +59,8 @@ start() - # Store the font so we can use it ASAP on boot - if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then - mkdir -p "$RC_LIBEXECDIR"/console -- setfont -O "$RC_LIBEXECDIR"/console/font -+ zcat "/usr/share/consolefonts/$consolefont" \ -+ > "$RC_LIBEXECDIR"/console/font - fi - - return $retval --- -2.11.0 - diff --git a/system/openrc/APKBUILD b/system/openrc/APKBUILD index ac9d8b184..c2cb32220 100644 --- a/system/openrc/APKBUILD +++ b/system/openrc/APKBUILD @@ -1,7 +1,7 @@ # Maintainer: pkgname=openrc pkgver=0.24.1 -pkgrel=9 +pkgrel=10 pkgdesc="OpenRC manages the services, startup and shutdown of a host" url="https://github.com/OpenRC/openrc" arch="all" @@ -19,7 +19,6 @@ source="$pkgname-$pkgver.tar.gz::https://github.com/OpenRC/openrc/archive/$pkgve 0004-hide-error-when-migrating-var-run-to-run.patch 0005-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch 0006-mount-efivars-read-only.patch - 0007-make-consolefont-service-compatible-with-busyboxs-se.patch openrc-configuration.patch @@ -69,8 +68,11 @@ package() { rm "$pkgdir"/etc/conf.d/network rm "$pkgdir"/etc/init.d/network - # we use console-setup for keymaps - rm "$pkgdir"/etc/init.d/keymaps + # we ship these in system/kbd + for i in consolefont keymaps; do + rm "$pkgdir"/etc/conf.d/$i + rm "$pkgdir"/etc/init.d/$i + done # we use gettys-openrc for TTY rm "$pkgdir"/etc/init.d/agetty @@ -86,7 +88,6 @@ aedf77f9159fefb4bd5f30a29a33b6aedbc986c9a0f993aa928cc79fbe24aac76bd9e5974dcce52e d54630d40a2d6b10a325cb012d4efcda997a60c008ca953ce5d60059d3f267308a59dabddf93a5fc0d301aa91967137d144effbe5f574394af768ce4ebc48738 0004-hide-error-when-migrating-var-run-to-run.patch 39a35c54ec9112fe84c901ed155a711cec8e194af02d5483ee60b80743dab12391e6fdc7b3da2f86844dd4edcf53e681ff95bd4d6fa1101a89ce54dce2ddbb7c 0005-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch 7221dd2daccd8844f6f9481b7b5921abc2711c8abd1a4bb72f04db8fd8e734b817f5d0d571daea0e2e05d3bc687f75ee1d8025249996bdee0b3328e18d9da7d3 0006-mount-efivars-read-only.patch -234c4f3cf39df3350dbea25c00b8d584794b28194f44c726767a6a16d91a26fee1b5d2dd16635f19803fc015b4e9d99c52b23128e6b815938b88365feba8cf59 0007-make-consolefont-service-compatible-with-busyboxs-se.patch 2dde266f3176456724e4b0c40476e7061e31986b67744b4a53c71ba0d3896860b4569e3af2ea4777a9d8fe3b6282ff869666570f1daa86cdc410c0e09805c990 openrc-configuration.patch 12bb6354e808fbf47bbab963de55ee7901738b4a912659982c57ef2777fff9a670e867fcb8ec316a76b151032c92dc89a950d7d1d835ef53f753a8f3b41d2cec openrc.logrotate 99b542c0903ad6874b8c308b2e0660a4fe2ff9db962dfec65325cd12c368873a2ae800d5e6d42dc4deff775e1d5c0068869eb72581f7ab16e88d5738afe1d3dd hostname.initd |