Update package.py

Removed comments on configure options.

1 files changed, 0 insertions, 153 deletions

diff --git a/var/spack/repos/builtin/packages/netcdf-fortran/package.py b/var/spack/repos/builtin/packages/netcdf-fortran/package.py
index 4e0b14d012..954e7dc3e8 100644
--- a/var/spack/repos/builtin/packages/netcdf-fortran/package.py
+++ b/var/spack/repos/builtin/packages/netcdf-fortran/package.py
@@ -16,156 +16,3 @@ class NetcdfFortran(Package):
         configure("--prefix=%s" % prefix)
         make()
         make("install")
-
-
-
-
-# netcdf-fortran configure parameters are below
-# ---------------------------------------------
-#
-# `configure' configures netCDF-Fortran 4.4.3 to adapt to many kinds of systems.
-# 
-# Usage: ./configure [OPTION]... [VAR=VALUE]...
-# 
-# To assign environment variables (e.g., CC, CFLAGS...), specify them as
-# VAR=VALUE.  See below for descriptions of some of the useful variables.
-# 
-# Defaults for the options are specified in brackets.
-# 
-# Configuration:
-#   -h, --help              display this help and exit
-#       --help=short        display options specific to this package
-#       --help=recursive    display the short help of all the included packages
-#   -V, --version           display version information and exit
-#   -q, --quiet, --silent   do not print `checking ...' messages
-#       --cache-file=FILE   cache test results in FILE [disabled]
-#   -C, --config-cache      alias for `--cache-file=config.cache'
-#   -n, --no-create         do not create output files
-#       --srcdir=DIR        find the sources in DIR [configure dir or `..']
-# 
-# Installation directories:
-#   --prefix=PREFIX         install architecture-independent files in PREFIX
-#                           [/usr/local]
-#   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-#                           [PREFIX]
-# 
-# By default, `make install' will install all the files in
-# `/usr/local/bin', `/usr/local/lib' etc.  You can specify
-# an installation prefix other than `/usr/local' using `--prefix',
-# for instance `--prefix=$HOME'.
-# 
-# For better control, use the options below.
-# 
-# Fine tuning of the installation directories:
-#   --bindir=DIR            user executables [EPREFIX/bin]
-#   --sbindir=DIR           system admin executables [EPREFIX/sbin]
-#   --libexecdir=DIR        program executables [EPREFIX/libexec]
-#   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-#   --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-#   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-#   --libdir=DIR            object code libraries [EPREFIX/lib]
-#   --includedir=DIR        C header files [PREFIX/include]
-#   --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-#   --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-#   --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-#   --infodir=DIR           info documentation [DATAROOTDIR/info]
-#   --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-#   --mandir=DIR            man documentation [DATAROOTDIR/man]
-#   --docdir=DIR            documentation root [DATAROOTDIR/doc/netcdf-fortran]
-#   --htmldir=DIR           html documentation [DOCDIR]
-#   --dvidir=DIR            dvi documentation [DOCDIR]
-#   --pdfdir=DIR            pdf documentation [DOCDIR]
-#   --psdir=DIR             ps documentation [DOCDIR]
-# 
-# Program names:
-#   --program-prefix=PREFIX            prepend PREFIX to installed program names
-#   --program-suffix=SUFFIX            append SUFFIX to installed program names
-#   --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-# 
-# System types:
-#   --build=BUILD     configure for building on BUILD [guessed]
-#   --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-#   --target=TARGET   configure for building compilers for TARGET [HOST]
-# 
-# Optional Features:
-#   --disable-option-checking  ignore unrecognized --enable/--with options
-#   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-#   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-#   --enable-silent-rules   less verbose build output (undo: "make V=1")
-#   --disable-silent-rules  verbose build output (undo: "make V=0")
-#   --enable-maintainer-mode
-#                           enable make rules and dependencies not useful (and
-#                           sometimes confusing) to the casual installer
-#   --enable-valgrind-tests build with valgrind-tests (valgrind is required,
-#                           static builds only)
-#   --enable-parallel-tests Run extra parallel IO tests. Ignored if netCDF-4 is
-#                           not enabled, or built on a system without parallel
-#                           I/O support.
-#   --enable-extra-tests    run some extra tests that may not pass because of
-#                           known issues
-#   --enable-doxygen        Enable generation of documentation with doxygen.
-#   --enable-dot            Use dot (provided by graphviz) to generate charts
-#                           and graphs in the doxygen-based documentation.
-#   --enable-internal-docs  Include documentation of library internals. This is
-#                           of interest only to those developing the netCDF
-#                           library.
-#   --enable-dependency-tracking
-#                           do not reject slow dependency extractors
-#   --disable-dependency-tracking
-#                           speeds up one-time build
-#   --disable-f03-compiler-check
-#                           disable check of ISO_C_BINDING support in Fortran
-#                           compiler
-#   --disable-f03           suppress netCDF Fortran 2003 native code
-#   --disable-fortran-type-check
-#                           cause the Fortran type sizes checks to be skipped
-#   --enable-large-file-tests
-#                           Run tests which create very large data files (~13 GB
-#                           disk space required, but it will be recovered when
-#                           tests are complete). See option --with-temp-large to
-#                           specify temporary directory
-#   --enable-benchmarks     Run benchmarks. This is an experimental feature.
-#   --enable-shared[=PKGS]  build shared libraries [default=yes]
-#   --enable-static[=PKGS]  build static libraries [default=yes]
-#   --enable-fast-install[=PKGS]
-#                           optimize for fast installation [default=yes]
-#   --disable-libtool-lock  avoid locking (might break parallel builds)
-#   --disable-largefile     omit support for large files
-#   --enable-extra-example-tests
-#                           Run extra example tests; requires GNU sed. Ignored
-#                           if netCDF-4 is not enabled.
-#   --enable-dll            build a win32 DLL (only works on mingw)
-# 
-# Optional Packages:
-#   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-#   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-#   --with-temp-large=<directory>
-#                           specify directory where large files (i.e. >2 GB)
-#                           will be written, if large files tests are run with
-#                           --enable-large-file-tests
-#   --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
-#                           both]
-#   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-#   --with-sysroot=DIR Search for dependent libraries within DIR
-#                         (or the compiler's sysroot if not specified).
-# 
-# Some influential environment variables:
-#   CC          C compiler command
-#   CFLAGS      C compiler flags
-#   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-#               nonstandard directory <lib dir>
-#   LIBS        libraries to pass to the linker, e.g. -l<library>
-#   CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-#               you have headers in a nonstandard directory <include dir>
-#   FC          Fortran compiler command
-#   FCFLAGS     Fortran compiler flags
-#   F77         Fortran 77 compiler command
-#   FFLAGS      Fortran 77 compiler flags
-#   CPP         C preprocessor
-# 
-# Use these variables to override the choices made by `configure' or to help
-# it to find libraries and programs with nonstandard names/locations.
-# 
-# Report bugs to <support-netcdf@unidata.ucar.edu>.
-# 
-# from spack import *