diff options
Diffstat (limited to 'share/spack')
-rw-r--r-- | share/spack/csh/spack.csh | 91 | ||||
-rw-r--r-- | share/spack/csh/spack_pathadd.csh | 23 | ||||
-rwxr-xr-x | share/spack/setup-env.bash | 132 | ||||
-rwxr-xr-x | share/spack/setup-env.csh | 47 | ||||
-rwxr-xr-x | share/spack/setup-env.sh | 164 |
5 files changed, 325 insertions, 132 deletions
diff --git a/share/spack/csh/spack.csh b/share/spack/csh/spack.csh new file mode 100644 index 0000000000..169e9878bf --- /dev/null +++ b/share/spack/csh/spack.csh @@ -0,0 +1,91 @@ +######################################################################## +# This is a wrapper around the spack command that forwards calls to +# 'spack use' and 'spack unuse' to shell functions. This in turn +# allows them to be used to invoke dotkit functions. +# +# 'spack use' is smarter than just 'use' because it converts its +# arguments into a unique spack spec that is then passed to dotkit +# commands. This allows the user to use packages without knowing all +# their installation details. +# +# e.g., rather than requring a full spec for libelf, the user can type: +# +# spack use libelf +# +# This will first find the available libelf dotkits and use a +# matching one. If there are two versions of libelf, the user would +# need to be more specific, e.g.: +# +# spack use libelf@0.8.13 +# +# This is very similar to how regular spack commands work and it +# avoids the need to come up with a user-friendly naming scheme for +# spack dotfiles. +######################################################################## +# accumulate initial flags for main spack command +set _sp_flags = "" +while ( $#_sp_args > 0 ) + if ( "$_sp_args[1]" !~ "-*" ) break + set _sp_flags = "$_sp_flags $_sp_args[1]" + shift _sp_args +end + +# h and V flags don't require further output parsing. +if ( "$_sp_flags" =~ *h* || "$_sp_flags" =~ *V* ) then + \spack $_sp_flags $_sp_args + goto _sp_end +endif + +# Set up args -- we want a subcommand and a spec. +set _sp_subcommand="" +set _sp_spec="" +[ $#_sp_args -gt 0 ] && set _sp_subcommand = ($_sp_args[1]) +[ $#_sp_args -gt 1 ] && set _sp_spec = ($_sp_args[2-]) + +# Figure out what type of module we're running here. +set _sp_modtype = "" +switch ($_sp_subcommand) +case use: +case unuse: +case load: +case unload: + set _sp_module_args="""" + if ( "$_sp_spec" =~ "-*" ) then + set _sp_module_args = $_sp_spec[1] + shift _sp_spec + set _sp_spec = ($_sp_spec) + endif + # Translate the parameter into pieces of a command. + # _sp_modtype is an arg to spack module find, and + # _sp_sh_cmd is the equivalent shell command. + switch ($_sp_subcommand) + case use: + case unuse: + set _sp_modtype = dotkit + set _sp_sh_cmd = ( "`alias $_sp_subcommand'" ) + breaksw + case load: + case unload: + set _sp_modtype = tcl + set _sp_sh_cmd = ( "`alias module`" $_sp_subcommand ) + breaksw + endsw + + # Here the user has run use or unuse with a spec. Find a matching + # spec using 'spack module find', then use the appropriate module + # tool's commands to add/remove the result from the environment. + # If spack module command comes back with an error, do nothing. + set _sp_full_spec = "" + if { set _sp_full_spec = `\spack module find $_sp_modtype $_sp_spec` } then + $_sp_sh_cmd $_sp_module_args $_sp_full_spec + endif + breaksw + +default: + \spack $_sp_args + breaksw +endsw + +_sp_end: +unset _sp_args _sp_full_spec _sp_modtype _sp_module_args +unset _sp_sh_cmd _sp_spec _sp_subcommand _sp_flags diff --git a/share/spack/csh/spack_pathadd.csh b/share/spack/csh/spack_pathadd.csh new file mode 100644 index 0000000000..1e0800c5f3 --- /dev/null +++ b/share/spack/csh/spack_pathadd.csh @@ -0,0 +1,23 @@ +######################################################################## +# Prepends directories to path, if they exist. +# pathadd /path/to/dir # add to PATH +# or pathadd OTHERPATH /path/to/dir # add to OTHERPATH +######################################################################## +# If no variable name is supplied, just append to PATH +# otherwise append to that variable. +set _pa_varname = PATH; +set _pa_new_path = $_pa_args[1]; +[ $#_pa_args -gt 1 ] && set _pa_varname = $_pa_args[1] && set _pa_new_path = $_pa_args[2]; + +# Check whether the variable is set yet. +set _pa_old_value = "" +eval set _pa_set = '$?'$_pa_varname +[ $_pa_set -eq 1 ] && eval set _pa_old_value='$'$_pa_varname; + +# Do the actual prepending here, if it is a dir and not already in the path +if ( -d $_pa_new_path && \:$_pa_old_value\: !~ *\:$_pa_new_path\:* ) then + [ -n "$_pa_old_value" ] && setenv $_pa_varname $_pa_new_path\:$_pa_old_value + [ -z "$_pa_old_value" ] && setenv $_pa_varname $_pa_new_path +endif + +unset _pa_args _pa_new_path _pa_old_value _pa_set _pa_varname diff --git a/share/spack/setup-env.bash b/share/spack/setup-env.bash deleted file mode 100755 index e22a259167..0000000000 --- a/share/spack/setup-env.bash +++ /dev/null @@ -1,132 +0,0 @@ -############################################################################## -# Copyright (c) 2013, Lawrence Livermore National Security, LLC. -# Produced at the Lawrence Livermore National Laboratory. -# -# This file is part of Spack. -# Written by Todd Gamblin, tgamblin@llnl.gov, All rights reserved. -# LLNL-CODE-647188 -# -# For details, see https://scalability-llnl.github.io/spack -# Please also see the LICENSE file for our notice and the LGPL. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License (as published by -# the Free Software Foundation) version 2.1 dated February 1999. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and -# conditions of the GNU General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with this program; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -############################################################################## - -# -# -# This file is part of Spack and sets up the spack environment for -# bash shells. This includes dotkit support as well as putting spack -# in your path. Source it like this: -# -# . /path/to/spack/share/spack/setup-env.bash -# -# - - -######################################################################## -# This is a wrapper around the spack command that forwards calls to -# 'spack use' and 'spack unuse' to shell functions. This in turn -# allows them to be used to invoke dotkit functions. -# -# 'spack use' is smarter than just 'use' because it converts its -# arguments into a unique spack spec that is then passed to dotkit -# commands. This allows the user to use packages without knowing all -# their installation details. -# -# e.g., rather than requring a full spec for libelf, the user can type: -# -# spack use libelf -# -# This will first find the available libelf dotkits and use a -# matching one. If there are two versions of libelf, the user would -# need to be more specific, e.g.: -# -# spack use libelf@0.8.13 -# -# This is very similar to how regular spack commands work and it -# avoids the need to come up with a user-friendly naming scheme for -# spack dotfiles. -######################################################################## -function spack { - _spack_subcommand=$1; shift - _spack_spec="$@" - - # Filter out use and unuse. For any other commands, just run the - # command. - case $_spack_subcommand in - "use") ;; - "unuse") ;; - *) - command spack $_spack_subcommand "$@" - return - ;; - esac - - # If no args or -h, just run that command as well. - if [ -z "$1" -o "$1" = "-h" ]; then - command spack $_spack_subcommand -h - return - fi - - # Shift any other args for use off before parsing spec. - _spack_use_args="" - if [[ "$1" =~ ^- ]]; then - _spack_use_args="$1"; shift - _spack_spec="$@" - fi - - # Here the user has run use or unuse with a spec. Find a matching - # spec with a dotkit using spack dotkit, then use or unuse the - # result. If spack dotkit comes back with an error, do nothing. - if _spack_full_spec=$(command spack dotkit $_spack_spec); then - $_spack_subcommand $_spack_use_args $_spack_full_spec - fi -} - -######################################################################## -# Prepends directories to path, if they exist. -# pathadd /path/to/dir # add to PATH -# or pathadd OTHERPATH /path/to/dir # add to OTHERPATH -######################################################################## -function _spack_pathadd { - # If no variable name is supplied, just append to PATH - # otherwise append to that variable. - varname=PATH - path="$1" - if [ -n "$2" ]; then - varname="$1" - path="$2" - fi - - # Do the actual prepending here. - eval "oldvalue=\"\$$varname\"" - if [ -d "$path" ] && [[ ":$oldvalue:" != *":$path:"* ]]; then - if [ -n "$oldvalue" ]; then - eval "export $varname=\"$path:$oldvalue\"" - else - export $varname="$path" - fi - fi -} - - -# -# Set up dotkit and path in the user environment -# -_spack_share_dir="$(dirname ${BASH_SOURCE[0]})" -_spack_prefix="$(dirname $(dirname $_spack_share_dir))" - -_spack_pathadd DK_NODE "$_spack_share_dir/dotkit" -_spack_pathadd PATH "$_spack_prefix/bin" - diff --git a/share/spack/setup-env.csh b/share/spack/setup-env.csh new file mode 100755 index 0000000000..cc12eae82f --- /dev/null +++ b/share/spack/setup-env.csh @@ -0,0 +1,47 @@ +############################################################################## +# Copyright (c) 2013, Lawrence Livermore National Security, LLC. +# Produced at the Lawrence Livermore National Laboratory. +# +# This file is part of Spack. +# Written by Todd Gamblin, tgamblin@llnl.gov, All rights reserved. +# LLNL-CODE-647188 +# +# For details, see https://scalability-llnl.github.io/spack +# Please also see the LICENSE file for our notice and the LGPL. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License (as published by +# the Free Software Foundation) version 2.1 dated February 1999. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and +# conditions of the GNU General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +############################################################################## + +# +# This file is part of Spack and sets up the spack environment for +# csh and tcsh. This includes dotkit support, module support, and +# it also puts spack in your path. Source it like this: +# +# setenv SPACK_ROOT /path/to/spack +# source $SPACK_ROOT/share/spack/setup-env.csh +# +if ($?SPACK_ROOT) then + set _spack_source_file = $SPACK_ROOT/share/spack/setup-env.csh + set _spack_share_dir = $SPACK_ROOT/share/spack + + # Command aliases point at separate source files + alias spack 'set _sp_args = (\!*); source $_spack_share_dir/csh/spack.csh' + alias _spack_pathadd 'set _pa_args = (\!*) && source $_spack_share_dir/csh/spack_pathadd.csh' + + # Set up modules and dotkit search paths in the user environment + # TODO: fix SYS_TYPE to something non-LLNL-specific + _spack_pathadd DK_NODE "$_spack_share_dir/dotkit/$SYS_TYPE" + _spack_pathadd MODULEPATH "$_spack_share_dir/modules/$SYS_TYPE" + _spack_pathadd PATH "$SPACK_ROOT/bin" +endif diff --git a/share/spack/setup-env.sh b/share/spack/setup-env.sh new file mode 100755 index 0000000000..0142e04817 --- /dev/null +++ b/share/spack/setup-env.sh @@ -0,0 +1,164 @@ +############################################################################## +# Copyright (c) 2013, Lawrence Livermore National Security, LLC. +# Produced at the Lawrence Livermore National Laboratory. +# +# This file is part of Spack. +# Written by Todd Gamblin, tgamblin@llnl.gov, All rights reserved. +# LLNL-CODE-647188 +# +# For details, see https://scalability-llnl.github.io/spack +# Please also see the LICENSE file for our notice and the LGPL. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License (as published by +# the Free Software Foundation) version 2.1 dated February 1999. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and +# conditions of the GNU General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +############################################################################## + +# +# This file is part of Spack and sets up the spack environment for +# bash and zsh. This includes dotkit support, module support, and +# it also puts spack in your path. Source it like this: +# +# . /path/to/spack/share/spack/setup-env.sh +# + +######################################################################## +# This is a wrapper around the spack command that forwards calls to +# 'spack use' and 'spack unuse' to shell functions. This in turn +# allows them to be used to invoke dotkit functions. +# +# 'spack use' is smarter than just 'use' because it converts its +# arguments into a unique spack spec that is then passed to dotkit +# commands. This allows the user to use packages without knowing all +# their installation details. +# +# e.g., rather than requring a full spec for libelf, the user can type: +# +# spack use libelf +# +# This will first find the available libelf dotkits and use a +# matching one. If there are two versions of libelf, the user would +# need to be more specific, e.g.: +# +# spack use libelf@0.8.13 +# +# This is very similar to how regular spack commands work and it +# avoids the need to come up with a user-friendly naming scheme for +# spack dotfiles. +######################################################################## +function spack { + # accumulate initial flags for main spack command + _sp_flags="" + while [[ "$1" =~ ^- ]]; do + _sp_flags="$_sp_flags $1" + shift + done + + # h and V flags don't require further output parsing. + if [[ "$_sp_flags" =~ *h* || "$_sp_flags" =~ *V* ]]; then + command spack $_sp_flags "$@" + return + fi + + _sp_subcommand=$1; shift + _sp_spec="$@" + + # Filter out use and unuse. For any other commands, just run the + # command. + case $_sp_subcommand in + "use"|"unuse"|"load"|"unload") + # Shift any other args for use off before parsing spec. + _sp_module_args="" + if [[ "$1" =~ ^- ]]; then + _sp_module_args="$1"; shift + _sp_spec="$@" + fi + + # Translate the parameter into pieces of a command. + # _sp_modtype is an arg to spack module find, and + # _sp_sh_cmd is the equivalent shell command. + case $_sp_subcommand in + "use"|"unuse") + _sp_modtype=dotkit + _sp_sh_cmd=$_sp_subcommand + ;; + "load"|"unload") + _sp_modtype=tcl + _sp_sh_cmd="module $_sp_subcommand" + ;; + esac + + # Here the user has run use or unuse with a spec. Find a matching + # spec using 'spack module find', then use the appropriate module + # tool's commands to add/remove the result from the environment. + # If spack module command comes back with an error, do nothing. + if _sp_full_spec=$(command spack $_sp_flags module find $_sp_modtype $_sp_spec); then + $_sp_sh_cmd $_sp_module_args $_sp_full_spec + fi + return + ;; + *) + command spack $_sp_flags $_sp_subcommand $_sp_spec + esac +} + +######################################################################## +# Prepends directories to path, if they exist. +# pathadd /path/to/dir # add to PATH +# or pathadd OTHERPATH /path/to/dir # add to OTHERPATH +######################################################################## +function _spack_pathadd { + # If no variable name is supplied, just append to PATH + # otherwise append to that variable. + _pa_varname=PATH + _pa_new_path="$1" + if [ -n "$2" ]; then + _pa_varname="$1" + _pa_new_path="$2" + fi + + # Do the actual prepending here. + eval "_pa_oldvalue=\$${_pa_varname}" + + if [ -d "$_pa_new_path" ] && [[ ":$_pa_oldvalue:" != *":$_pa_new_path:"* ]]; then + if [ -n "$_pa_oldvalue" ]; then + eval "export $_pa_varname=\"$_pa_new_path:$_pa_oldvalue\"" + else + export $_pa_varname="$_pa_new_path" + fi + fi +} + +# +# Figure out where this file is. Below code needs to be portable to +# bash and zsh. +# +_sp_source_file="${BASH_SOURCE[0]}" # Bash's location of last sourced file. +if [ -z "$_sp_source_file" ]; then + _sp_source_file="$0:A" # zsh way to do it + if [[ "$_sp_source_file" == *":A" ]]; then + # Not zsh either... bail out with plain old $0, + # which WILL NOT work if this is sourced indirectly. + _sp_source_file="$0" + fi +fi + +# +# Set up modules and dotkit search paths in the user environment +# +_sp_share_dir="$(dirname $_sp_source_file)" +_sp_prefix="$(dirname $(dirname $_sp_share_dir))" + +# TODO: fix SYS_TYPE to something non-LLNL-specific +_spack_pathadd DK_NODE "$_sp_share_dir/dotkit/$SYS_TYPE" +_spack_pathadd MODULEPATH "$_sp_share_dir/modules/$SYS_TYPE" +_spack_pathadd PATH "$_sp_prefix/bin" |