diff options
Diffstat (limited to 'var')
103 files changed, 2340 insertions, 358 deletions
diff --git a/var/spack/repos/builtin/packages/LuaJIT/package.py b/var/spack/repos/builtin/packages/LuaJIT/package.py new file mode 100644 index 0000000000..7b2a269212 --- /dev/null +++ b/var/spack/repos/builtin/packages/LuaJIT/package.py @@ -0,0 +1,15 @@ +import os +from spack import * + +class Luajit(Package): + """Flast flexible JITed lua""" + homepage = "http://www.luajit.org" + url = "http://luajit.org/download/LuaJIT-2.0.4.tar.gz" + + version('2.0.4', 'dd9c38307f2223a504cbfb96e477eca0') + + def install(self, spec, prefix): + # Linking with the C++ compiler is a dirty hack to deal with the fact + # that unwinding symbols are not included by libc, this is necessary + # on some platforms for the final link stage to work + make("install", "PREFIX=" + prefix, "TARGET_LD=" + os.environ['CXX']) diff --git a/var/spack/repos/builtin/packages/R/package.py b/var/spack/repos/builtin/packages/R/package.py index 2471dff09b..7c4aa3520c 100644 --- a/var/spack/repos/builtin/packages/R/package.py +++ b/var/spack/repos/builtin/packages/R/package.py @@ -1,4 +1,14 @@ +import functools +import glob +import inspect +import os +import re +from contextlib import closing + +import spack +from llnl.util.lang import match_predicate from spack import * +from spack.util.environment import * class R(Package): @@ -9,6 +19,8 @@ class R(Package): """ homepage = "https://www.r-project.org" url = "http://cran.cnr.berkeley.edu/src/base/R-3/R-3.1.2.tar.gz" + + extendable = True version('3.2.3', '1ba3dac113efab69e706902810cc2970') version('3.2.2', '57cef5c2e210a5454da1979562a10e5b') @@ -38,12 +50,57 @@ class R(Package): depends_on('tk') def install(self, spec, prefix): + rlibdir = join_path(prefix, 'rlib') options = ['--prefix=%s' % prefix, + '--libdir=%s' % rlibdir, '--enable-R-shlib', - '--enable-BLAS-shlib'] + '--enable-BLAS-shlib', + '--enable-R-framework=no'] if '+external-lapack' in spec: options.extend(['--with-blas', '--with-lapack']) configure(*options) make() make('install') + + # ======================================================================== + # Set up environment to make install easy for R extensions. + # ======================================================================== + + @property + def r_lib_dir(self): + return os.path.join('rlib', 'R', 'library') + + def setup_dependent_environment(self, spack_env, run_env, extension_spec): + # Set R_LIBS to include the library dir for the + # extension and any other R extensions it depends on. + r_libs_path = [] + for d in extension_spec.traverse(): + if d.package.extends(self.spec): + r_libs_path.append(os.path.join(d.prefix, self.r_lib_dir)) + + r_libs_path = ':'.join(r_libs_path) + spack_env.set('R_LIBS', r_libs_path) + + # For run time environment set only the path for extension_spec and prepend it to R_LIBS + if extension_spec.package.extends(self.spec): + run_env.prepend_path('R_LIBS', os.path.join(extension_spec.prefix, self.r_lib_dir)) + + + def setup_dependent_package(self, module, ext_spec): + """ + Called before R modules' install() methods. + + In most cases, extensions will only need to have one line:: + + R('CMD', 'INSTALL', '--library=%s' % self.module.r_lib_dir, '%s' % self.stage.archive_file) + """ + # R extension builds can have a global R executable function + module.R = Executable(join_path(self.spec.prefix.bin, 'R')) + + # Add variable for library directry + module.r_lib_dir = os.path.join(ext_spec.prefix, self.r_lib_dir) + + # Make the site packages directory for extensions, if it does not exist already. + if ext_spec.package.is_extension: + mkdirp(module.r_lib_dir) diff --git a/var/spack/repos/builtin/packages/adol-c/openmp_exam.patch b/var/spack/repos/builtin/packages/adol-c/openmp_exam.patch new file mode 100644 index 0000000000..8e21c72d92 --- /dev/null +++ b/var/spack/repos/builtin/packages/adol-c/openmp_exam.patch @@ -0,0 +1,13 @@ +diff --git a/ADOL-C/examples/additional_examples/openmp_exam/liborpar.cpp b/ADOL-C/examples/additional_examples/openmp_exam/liborpar.cpp +index fc6fc28..14103d2 100644 +--- a/ADOL-C/examples/additional_examples/openmp_exam/liborpar.cpp ++++ b/ADOL-C/examples/additional_examples/openmp_exam/liborpar.cpp +@@ -27,7 +27,7 @@ using namespace std; + #include <ctime> + #include <cmath> + +-#include "adolc.h" ++#include <adolc/adolc.h> + + #ifdef _OPENMP + #include <omp.h> diff --git a/var/spack/repos/builtin/packages/adol-c/package.py b/var/spack/repos/builtin/packages/adol-c/package.py new file mode 100644 index 0000000000..70933542ca --- /dev/null +++ b/var/spack/repos/builtin/packages/adol-c/package.py @@ -0,0 +1,80 @@ +from spack import * +import sys + +class AdolC(Package): + """A package for the automatic differentiation of first and higher derivatives of vector functions in C and C++ programs by operator overloading.""" + homepage = "https://projects.coin-or.org/ADOL-C" + url = "http://www.coin-or.org/download/source/ADOL-C/ADOL-C-2.6.1.tgz" + + version('head', svn='https://projects.coin-or.org/svn/ADOL-C/trunk/') + version('2.6.1', '1032b28427d6e399af4610e78c0f087b') + + variant('doc', default=True, description='Install documentation') + variant('openmp', default=False, description='Enable OpenMP support') + variant('sparse', default=False, description='Enable sparse drivers') + variant('tests', default=True, description='Build all included examples as a test case') + + patch('openmp_exam.patch') + + def install(self, spec, prefix): + make_args = ['--prefix=%s' % prefix] + + # --with-cflags=FLAGS use CFLAGS=FLAGS (default: -O3 -Wall -ansi) + # --with-cxxflags=FLAGS use CXXFLAGS=FLAGS (default: -O3 -Wall) + + if '+openmp' in spec: + if spec.satisfies('%gcc'): + make_args.extend([ + '--with-openmp-flag=-fopenmp' # FIXME: Is this required? -I <path to omp.h> -L <LLVM OpenMP library path> + ]) + else: + raise InstallError("OpenMP flags for compilers other than GCC are not implemented.") + + if '+sparse' in spec: + make_args.extend([ + '--enable-sparse' + ]) + + # We can simply use the bundled examples to check + # whether Adol-C works as expected + if '+tests' in spec: + make_args.extend([ + '--enable-docexa', # Documeted examples + '--enable-addexa' # Additional examples + ]) + if '+openmp' in spec: + make_args.extend([ + '--enable-parexa' # Parallel examples + ]) + + configure(*make_args) + make() + make("install") + + # Copy the config.h file, as some packages might require it + source_directory = self.stage.source_path + config_h = join_path(source_directory,'ADOL-C','src','config.h') + install(config_h, join_path(prefix.include,'adolc')) + + # Install documentation to {prefix}/share + if '+doc' in spec: + install_tree(join_path('ADOL-C','doc'), + join_path(prefix.share,'doc')) + + # Install examples to {prefix}/share + if '+tests' in spec: + install_tree(join_path('ADOL-C','examples'), + join_path(prefix.share,'examples')) + + # Run some examples that don't require user input + # TODO: Check that bundled examples produce the correct results + with working_dir(join_path(source_directory,'ADOL-C','examples')): + Executable('./tapeless_scalar')() + Executable('./tapeless_vector')() + + with working_dir(join_path(source_directory,'ADOL-C','examples','additional_examples')): + Executable('./checkpointing/checkpointing')() + + if '+openmp' in spec: + with working_dir(join_path(source_directory,'ADOL-C','examples','additional_examples')): + Executable('./checkpointing/checkpointing')() diff --git a/var/spack/repos/builtin/packages/antlr/package.py b/var/spack/repos/builtin/packages/antlr/package.py new file mode 100644 index 0000000000..c7c7e3e850 --- /dev/null +++ b/var/spack/repos/builtin/packages/antlr/package.py @@ -0,0 +1,47 @@ +from spack import * + +class Antlr(Package): + + homepage = "http://www.antlr.org" + url = "https://github.com/antlr/antlr/tarball/v2.7.7" + + # NOTE: This requires that a system Java be available. + # Spack does not yet know how to install Java compilers + + # Notes from http://nco.sourceforge.net/#bld + # The first steps to build (i.e., compile, for the most part) NCO from + # source code are to install the pre-requisites: ANTLR version 2.7.7 + # (like this one not version 3.x or 4.x!) (required for ncap2)... ANTLR + # binaries from major distributions are pre-built with the source patch + # necessary to allow NCO to link to ANTLR... The ANTLR source file + # CharScanner.hpp must include this line: #include <cstring> or else + # ncap2 will not compile (this tarball is already patched). + version('2.7.7', '914865e853fe8e1e61a9f23d045cb4ab', + # Patched version as described above + url='http://dust.ess.uci.edu/tmp/antlr-2.7.7.tar.gz') + # Unpatched version + # url='http://dust.ess.uci.edu/nco/antlr-2.7.7.tar.gz') + + variant('cxx', default=False, description='Enable ANTLR for C++') + variant('java', default=False, description='Enable ANTLR for Java') + variant('python', default=False, description='Enable ANTLR for Python') + variant('csharp', default=False, description='Enable ANTLR for Csharp') + + + def install(self, spec, prefix): + # Check for future enabling of variants + for v in ('+java', '+python', '+csharp'): + if v in spec: + raise Error('Illegal variant %s; for now, Spack only knows how to build antlr or antlr+cxx') + + config_args = [ + '--prefix=%s' % prefix, + '--%s-cxx' % ('enable' if '+cxx' in spec else 'disable'), + '--%s-java' % ('enable' if '+java' in spec else 'disable'), + '--%s-python' % ('enable' if '+python' in spec else 'disable'), + '--%s-csharp' % ('enable' if '+csharp' in spec else 'disable')] + + # which('autoreconf')('-iv') + configure(*config_args) + make() + make("install") diff --git a/var/spack/repos/builtin/packages/astyle/package.py b/var/spack/repos/builtin/packages/astyle/package.py index 7260fd74a1..5274fc018f 100644 --- a/var/spack/repos/builtin/packages/astyle/package.py +++ b/var/spack/repos/builtin/packages/astyle/package.py @@ -14,4 +14,5 @@ class Astyle(Package): make('-f', join_path(self.stage.source_path,'build','clang','Makefile'), parallel=False) + mkdirp(self.prefix.bin) install(join_path(self.stage.source_path, 'src','bin','astyle'), self.prefix.bin) diff --git a/var/spack/repos/builtin/packages/autoconf/package.py b/var/spack/repos/builtin/packages/autoconf/package.py index 6412e810a6..b5e29b8a27 100644 --- a/var/spack/repos/builtin/packages/autoconf/package.py +++ b/var/spack/repos/builtin/packages/autoconf/package.py @@ -8,6 +8,8 @@ class Autoconf(Package): version('2.69', '82d05e03b93e45f5a39b828dc9c6c29b') version('2.62', '6c1f3b3734999035d77da5024aab4fbd') + depends_on("m4") + def install(self, spec, prefix): configure("--prefix=%s" % prefix) diff --git a/var/spack/repos/builtin/packages/bbcp/package.py b/var/spack/repos/builtin/packages/bbcp/package.py new file mode 100644 index 0000000000..e9baa5ccf4 --- /dev/null +++ b/var/spack/repos/builtin/packages/bbcp/package.py @@ -0,0 +1,17 @@ +from spack import * + +class Bbcp(Package): + """Securely and quickly copy data from source to target""" + homepage = "http://www.slac.stanford.edu/~abh/bbcp/" + + version('git', git='http://www.slac.stanford.edu/~abh/bbcp/bbcp.git', branch="master") + + def install(self, spec, prefix): + cd("src") + make() + # BBCP wants to build the executable in a directory whose name depends on the system type + makesname = Executable("../MakeSname") + bbcp_executable_path = "../bin/%s/bbcp" % makesname(output=str).rstrip("\n") + destination_path = "%s/bin/" % prefix + mkdirp(destination_path) + install(bbcp_executable_path, destination_path) diff --git a/var/spack/repos/builtin/packages/binutils/package.py b/var/spack/repos/builtin/packages/binutils/package.py index b8064093d2..158d722046 100644 --- a/var/spack/repos/builtin/packages/binutils/package.py +++ b/var/spack/repos/builtin/packages/binutils/package.py @@ -29,6 +29,7 @@ class Binutils(Package): configure_args = [ '--prefix=%s' % prefix, '--disable-dependency-tracking', + '--disable-werror', '--enable-interwork', '--enable-multilib', '--enable-shared', diff --git a/var/spack/repos/builtin/packages/bison/package.py b/var/spack/repos/builtin/packages/bison/package.py index 7c526fb958..9a2ddcbf96 100644 --- a/var/spack/repos/builtin/packages/bison/package.py +++ b/var/spack/repos/builtin/packages/bison/package.py @@ -10,6 +10,8 @@ class Bison(Package): version('3.0.4', 'a586e11cd4aff49c3ff6d3b6a4c9ccf8') + depends_on("m4") + def install(self, spec, prefix): configure("--prefix=%s" % prefix) diff --git a/var/spack/repos/builtin/packages/cbtf-argonavis/package.py b/var/spack/repos/builtin/packages/cbtf-argonavis/package.py index 7b07933911..90789a98f2 100644 --- a/var/spack/repos/builtin/packages/cbtf-argonavis/package.py +++ b/var/spack/repos/builtin/packages/cbtf-argonavis/package.py @@ -1,5 +1,5 @@ ################################################################################ -# Copyright (c) 2015 Krell Institute. All Rights Reserved. +# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved. # # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software @@ -24,43 +24,83 @@ class CbtfArgonavis(Package): homepage = "http://sourceforge.net/p/cbtf/wiki/Home/" # Mirror access template example - #url = "file:/g/g24/jeg/cbtf-argonavis-1.5.tar.gz" - #version('1.5', '1f7f6512f55409ed2135cfceabe26b82') + #url = "file:/home/jeg/OpenSpeedShop_ROOT/SOURCES/cbtf-argonavis-1.6.tar.gz" + #version('1.6', '0fafa0008478405c2c2319450f174ed4') - version('1.6', branch='master', git='http://git.code.sf.net/p/cbtf-argonavis/cbtf-argonavis') + version('1.6', branch='master', git='https://github.com/OpenSpeedShop/cbtf-argonavis.git') - depends_on("cmake@3.0.2:") + depends_on("cmake@3.0.2") + depends_on("boost@1.50.0:") depends_on("papi") + depends_on("mrnet@5.0.1:+lwthreads+krellpatch") depends_on("cbtf") depends_on("cbtf-krell") - depends_on("cuda") + depends_on("cuda@6.0.37") + #depends_on("cuda") parallel = False + def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions): + # Sets build type parameters into cmakeOptions the options that will enable the cbtf-krell built type settings + + compile_flags="-O2 -g" + BuildTypeOptions = [] + + # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the stdcmakeargs + for word in cmakeOptions[:]: + if word.startswith('-DCMAKE_BUILD_TYPE'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_CXX_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_C_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_VERBOSE_MAKEFILE'): + cmakeOptions.remove(word) + BuildTypeOptions.extend([ + '-DCMAKE_VERBOSE_MAKEFILE=ON', + '-DCMAKE_BUILD_TYPE=None', + '-DCMAKE_CXX_FLAGS=%s' % compile_flags, + '-DCMAKE_C_FLAGS=%s' % compile_flags + ]) + + cmakeOptions.extend(BuildTypeOptions) + + def install(self, spec, prefix): # Look for package installation information in the cbtf and cbtf-krell prefixes cmake_prefix_path = join_path(spec['cbtf'].prefix) + ':' + join_path(spec['cbtf-krell'].prefix) - # FIXME, hard coded for testing purposes, we will alter when the external package feature is available - cuda_prefix_path = "/usr/local/cudatoolkit-6.0" - cupti_prefix_path = "/usr/local/cudatoolkit-6.0/extras/CUPTI" - - with working_dir('CUDA'): with working_dir('build', create=True): - cmake('..', - '-DCMAKE_INSTALL_PREFIX=%s' % prefix, - '-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, - '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, - '-DCUDA_INSTALL_PATH=%s' % cuda_prefix_path, - '-DCUDA_ROOT=%s' % cuda_prefix_path, - '-DCUPTI_ROOT=%s' % cupti_prefix_path, - '-DCUDA_DIR=%s' % cuda_prefix_path, - '-DPAPI_ROOT=%s' % spec['papi'].prefix, - '-DCBTF_PREFIX=%s' % spec['cbtf'].prefix, - *std_cmake_args) - make("clean") - make() - make("install") + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, + '-DCUDA_DIR=%s' % spec['cuda'].prefix, + '-DCUDA_INSTALL_PATH=%s' % spec['cuda'].prefix, + '-DCUDA_TOOLKIT_ROOT_DIR=%s' % spec['cuda'].prefix, + '-DCUPTI_DIR=%s' % join_path(spec['cuda'].prefix + '/extras/CUPTI'), + '-DCUPTI_ROOT=%s' % join_path(spec['cuda'].prefix + '/extras/CUPTI'), + '-DPAPI_ROOT=%s' % spec['papi'].prefix, + '-DCBTF_DIR=%s' % spec['cbtf'].prefix, + '-DCBTF_KRELL_DIR=%s' % spec['cbtf-krell'].prefix, + '-DBOOST_ROOT=%s' % spec['boost'].prefix, + '-DBoost_DIR=%s' % spec['boost'].prefix, + '-DBOOST_LIBRARYDIR=%s' % spec['boost'].prefix.lib, + '-DMRNET_DIR=%s' % spec['mrnet'].prefix, + '-DBoost_NO_SYSTEM_PATHS=ON' + ]) + + # Add in the standard cmake arguments + cmakeOptions.extend(std_cmake_args) + + # Adjust the standard cmake arguments to what we want the build type, etc to be + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + # Invoke cmake + cmake('..', *cmakeOptions) + + make("clean") + make() + make("install") diff --git a/var/spack/repos/builtin/packages/cbtf-krell/package.py b/var/spack/repos/builtin/packages/cbtf-krell/package.py index 9458ac113c..e6050cb4a9 100644 --- a/var/spack/repos/builtin/packages/cbtf-krell/package.py +++ b/var/spack/repos/builtin/packages/cbtf-krell/package.py @@ -1,5 +1,5 @@ ################################################################################ -# Copyright (c) 2015 Krell Institute. All Rights Reserved. +# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved. # # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software @@ -26,21 +26,30 @@ class CbtfKrell(Package): homepage = "http://sourceforge.net/p/cbtf/wiki/Home/" # optional mirror access template - #url = "file:/g/g24/jeg/cbtf-krell-1.5.tar.gz" - #version('1.5', 'b13f6df6a93c44149d977773dd776d2f') + #url = "file:/home/jeg/cbtf-krell-1.6.tar.gz" + #version('1.6', 'edeb61cd488f16e7b124f77db9ce762d') - version('1.6', branch='master', git='http://git.code.sf.net/p/cbtf-krell/cbtf-krell') + version('1.6', branch='master', git='https://github.com/OpenSpeedShop/cbtf-krell.git') + # MPI variants + variant('openmpi', default=False, description="Build mpi experiment collector for openmpi MPI when this variant is enabled.") + variant('mpt', default=False, description="Build mpi experiment collector for SGI MPT MPI when this variant is enabled.") + variant('mvapich2', default=False, description="Build mpi experiment collector for mvapich2 MPI when this variant is enabled.") + variant('mvapich', default=False, description="Build mpi experiment collector for mvapich MPI when this variant is enabled.") + variant('mpich2', default=False, description="Build mpi experiment collector for mpich2 MPI when this variant is enabled.") + variant('mpich', default=False, description="Build mpi experiment collector for mpich MPI when this variant is enabled.") # Dependencies for cbtf-krell + depends_on("cmake@3.0.2") # For binutils service depends_on("binutils@2.24+krellpatch") # collectionTool - depends_on("boost@1.50.0") - depends_on("dyninst@8.2.1") - depends_on("mrnet@4.1.0:+lwthreads") + depends_on("boost@1.50.0:") + depends_on("dyninst@8.2.1:") + depends_on("mrnet@5.0.1:+lwthreads+krellpatch") + depends_on("xerces-c@3.1.1:") depends_on("cbtf") @@ -51,66 +60,207 @@ class CbtfKrell(Package): # MPI Installations # These have not worked either for build or execution, commenting out for now - #depends_on("openmpi") - #depends_on("mvapich2@2.0") - #depends_on("mpich") + depends_on("openmpi", when='+openmpi') + depends_on("mpich", when='+mpich') + depends_on("mpich2", when='+mpich2') + depends_on("mvapich2", when='+mvapich2') + depends_on("mvapich", when='+mvapich') + depends_on("mpt", when='+mpt') parallel = False + def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions): + # Sets build type parameters into cmakeOptions the options that will enable the cbtf-krell built type settings + + compile_flags="-O2 -g" + BuildTypeOptions = [] + # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the stdcmakeargs + for word in cmakeOptions[:]: + if word.startswith('-DCMAKE_BUILD_TYPE'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_CXX_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_C_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_VERBOSE_MAKEFILE'): + cmakeOptions.remove(word) + BuildTypeOptions.extend([ + '-DCMAKE_VERBOSE_MAKEFILE=ON', + '-DCMAKE_BUILD_TYPE=None', + '-DCMAKE_CXX_FLAGS=%s' % compile_flags, + '-DCMAKE_C_FLAGS=%s' % compile_flags + ]) + + cmakeOptions.extend(BuildTypeOptions) + + + + def set_mpi_cmakeOptions(self, spec, cmakeOptions): + # Appends to cmakeOptions the options that will enable the appropriate MPI implementations + + MPIOptions = [] + + # openmpi + if '+openmpi' in spec: + MPIOptions.extend([ + '-DOPENMPI_DIR=%s' % spec['openmpi'].prefix + ]) + # mpich + if '+mpich' in spec: + MPIOptions.extend([ + '-DMPICH_DIR=%s' % spec['mpich'].prefix + ]) + # mpich2 + if '+mpich2' in spec: + MPIOptions.extend([ + '-DMPICH2_DIR=%s' % spec['mpich2'].prefix + ]) + # mvapich + if '+mvapich' in spec: + MPIOptions.extend([ + '-DMVAPICH_DIR=%s' % spec['mvapich'].prefix + ]) + # mvapich2 + if '+mvapich2' in spec: + MPIOptions.extend([ + '-DMVAPICH2_DIR=%s' % spec['mvapich2'].prefix + ]) + # mpt + if '+mpt' in spec: + MPIOptions.extend([ + '-DMPT_DIR=%s' % spec['mpt'].prefix + ]) + + cmakeOptions.extend(MPIOptions) + def install(self, spec, prefix): # Add in paths for finding package config files that tell us where to find these packages - cmake_prefix_path = join_path(spec['cbtf'].prefix) + ':' + join_path(spec['dyninst'].prefix) - - # FIXME - hard code path until external package support is available - # Need to change this path and/or add additional paths for MPI experiment support on different platforms - #openmpi_prefix_path = "/opt/openmpi-1.8.2" - #mvapich_prefix_path = "/usr/local/tools/mvapich-gnu" - - # Other possibilities, they will need a -DMVAPICH_DIR=, etc clause in the cmake command to be recognized - # mvapich_prefix_path = "<mvapich install path>" - # mvapich2_prefix_path = "<mvapich2 install path>" - # mpich2_prefix_path = "<mpich2 install path>" - # mpich_prefix_path = "<mpich install path>" - # mpt_prefix_path = "<mpt install path>" - - # Add in paths for cuda if requested via the cuda variant - # FIXME - hard code path until external package support is available - #if '+cuda' in spec: - # cuda_prefix_path = "/usr/local/cuda-6.0" - # cupti_prefix_path = "/usr/local/cuda-6.0/extras/CUPTI" - #else: - # cuda_prefix_path = "" - # cupti_prefix_path = "" - - #'-DMVAPICH2_DIR=%s' % spec['mvapich2'].prefix, - #'-DOPENMPI_DIR=%s' % spec['openmpi'].prefix, - #'-DMPICH_DIR=%s' % spec['mpich'].prefix, - #'-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, - #'-DOPENMPI_DIR=%s' % openmpi_prefix_path, - #'-DMVAPICH_DIR=%s' % mvapich_prefix_path, - #'-DLIB_SUFFIX=64', - #'-DCUDA_DIR=%s' % cuda_prefix_path, - #'-DCUPTI_DIR=%s' % cupti_prefix_path, + #cmake_prefix_path = join_path(spec['cbtf'].prefix) + ':' + join_path(spec['dyninst'].prefix) + #'-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path # Build cbtf-krell with cmake with working_dir('build_cbtf_krell', create=True): - cmake('..', - '-DCMAKE_BUILD_TYPE=Debug', - '-DCMAKE_INSTALL_PREFIX=%s' % prefix, - '-DCBTF_DIR=%s' % spec['cbtf'].prefix, - '-DBINUTILS_DIR=%s' % spec['binutils'].prefix, - '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, - '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, - '-DPAPI_DIR=%s' % spec['papi'].prefix, - '-DBOOST_DIR=%s' % spec['boost'].prefix, - '-DMRNET_DIR=%s' % spec['mrnet'].prefix, - '-DDYNINST_DIR=%s' % spec['dyninst'].prefix, - '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, - '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, - *std_cmake_args) + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DCBTF_DIR=%s' % spec['cbtf'].prefix, + '-DBINUTILS_DIR=%s' % spec['binutils'].prefix, + '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, + '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, + '-DPAPI_DIR=%s' % spec['papi'].prefix, + '-DBOOST_DIR=%s' % spec['boost'].prefix, + '-DMRNET_DIR=%s' % spec['mrnet'].prefix, + '-DDYNINST_DIR=%s' % spec['dyninst'].prefix, + '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix + ]) + + + # Add any MPI implementations coming from variant settings + self.set_mpi_cmakeOptions(spec, cmakeOptions) + + # Add in the standard cmake arguments + cmakeOptions.extend(std_cmake_args) + + # Adjust the standard cmake arguments to what we want the build type, etc to be + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + # Invoke cmake + cmake('..', *cmakeOptions) make("clean") make() make("install") + + + #if '+cray' in spec: + #if 'cray' in self.spec.architecture: + # if '+runtime' in spec: + # with working_dir('build_cbtf_cray_runtime', create=True): + # python_vers='%d.%d' % spec['python'].version[:2] + # cmake .. \ + # -DCMAKE_BUILD_TYPE=Debug \ + # -DTARGET_OS="cray" \ + # -DRUNTIME_ONLY="true" \ + # -DCMAKE_INSTALL_PREFIX=${CBTF_KRELL_PREFIX} \ + # -DCMAKE_PREFIX_PATH=${CBTF_ROOT} \ + # -DCBTF_DIR=${CBTF_ROOT} \ + # -DBOOST_ROOT=${BOOST_INSTALL_PREFIX} \ + # -DXERCESC_DIR=${XERCESC_INSTALL_PREFIX} \ + # -DBINUTILS_DIR=${KRELL_ROOT} \ + # -DLIBMONITOR_DIR=${KRELL_ROOT_COMPUTE} \ + # -DLIBUNWIND_DIR=${KRELL_ROOT_COMPUTE} \ + # -DPAPI_DIR=${PAPI_ROOT} \ + # -DDYNINST_DIR=${DYNINST_CN_ROOT} \ + # -DMRNET_DIR=${MRNET_INSTALL_PREFIX} \ + # -DMPICH2_DIR=/opt/cray/mpt/7.0.1/gni/mpich2-gnu/48 + # else: + # with working_dir('build_cbtf_cray_frontend', create=True): + # python_vers='%d.%d' % spec['python'].version[:2] + # cmake .. \ + # -DCMAKE_BUILD_TYPE=Debug \ + # -DCMAKE_INSTALL_PREFIX=${CBTF_KRELL_PREFIX} \ + # -DCMAKE_PREFIX_PATH=${CBTF_ROOT} \ + # -DCBTF_DIR=${CBTF_ROOT} \ + # -DRUNTIME_TARGET_OS="cray" \ + # -DCBTF_KRELL_CN_RUNTIME_DIR=${CBTF_KRELL_CN_RUNTIME_ROOT} \ + # -DCBTF_CN_RUNTIME_DIR=${CBTF_CN_RUNTIME_ROOT} \ + # -DLIBMONITOR_CN_RUNTIME_DIR=${LIBMONITOR_CN_ROOT} \ + # -DLIBUNWIND_CN_RUNTIME_DIR=${LIBUNWIND_CN_ROOT} \ + # -DPAPI_CN_RUNTIME_DIR=${PAPI_CN_ROOT} \ + # -DXERCESC_CN_RUNTIME_DIR=/${XERCESC_CN_ROOT} \ + # -DMRNET_CN_RUNTIME_DIR=${MRNET_CN_ROOT} \ + # -DBOOST_CN_RUNTIME_DIR=${BOOST_CN_ROOT} \ + # -DDYNINST_CN_RUNTIME_DIR=${DYNINST_CN_ROOT} \ + # -DBOOST_ROOT=/${KRELL_ROOT} \ + # -DXERCESC_DIR=/${KRELL_ROOT} \ + # -DBINUTILS_DIR=/${KRELL_ROOT} \ + # -DLIBMONITOR_DIR=${KRELL_ROOT} \ + # -DLIBUNWIND_DIR=${KRELL_ROOT} \ + # -DPAPI_DIR=${PAPI_ROOT} \ + # -DDYNINST_DIR=${KRELL_ROOT} \ + # -DMRNET_DIR=${KRELL_ROOT} \ + # -DMPICH2_DIR=/opt/cray/mpt/7.0.1/gni/mpich2-gnu/48 + # fi +# +# make("clean") +# make() +# make("install") +# +# elif '+mic' in spec: +# if '+runtime' in spec: +# with working_dir('build_cbtf_mic_runtime', create=True): +# python_vers='%d.%d' % spec['python'].version[:2] +# cmake .. \ +# +# else: +# with working_dir('build_cbtf_cray_frontend', create=True): +# python_vers='%d.%d' % spec['python'].version[:2] +# cmake .. \ +# fi +# +# else: +# # Build cbtf-krell with cmake +# with working_dir('build_cbtf_krell', create=True): +# cmake('..', +# '-DCMAKE_BUILD_TYPE=Debug', +# '-DCMAKE_INSTALL_PREFIX=%s' % prefix, +# '-DCBTF_DIR=%s' % spec['cbtf'].prefix, +# '-DBINUTILS_DIR=%s' % spec['binutils'].prefix, +# '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, +# '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, +# '-DPAPI_DIR=%s' % spec['papi'].prefix, +# '-DBOOST_DIR=%s' % spec['boost'].prefix, +# '-DMRNET_DIR=%s' % spec['mrnet'].prefix, +# '-DDYNINST_DIR=%s' % spec['dyninst'].prefix, +# '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, +# '-DOPENMPI_DIR=%s' % openmpi_prefix_path, +# '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, +# *std_cmake_args) +# +# make("clean") +# make() +# make("install") +# +# fi +# diff --git a/var/spack/repos/builtin/packages/cbtf-lanl/package.py b/var/spack/repos/builtin/packages/cbtf-lanl/package.py index 2da9e8a1f7..5ca88601f3 100644 --- a/var/spack/repos/builtin/packages/cbtf-lanl/package.py +++ b/var/spack/repos/builtin/packages/cbtf-lanl/package.py @@ -1,5 +1,5 @@ ################################################################################ -# Copyright (c) 2015 Krell Institute. All Rights Reserved. +# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved. # # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software @@ -29,32 +29,65 @@ class CbtfLanl(Package): version('1.6', branch='master', git='http://git.code.sf.net/p/cbtf-lanl/cbtf-lanl') - + depends_on("cmake@3.0.2") # Dependencies for cbtf-krell - depends_on("boost@1.50") - depends_on("mrnet@4.1.0:+lwthreads") + depends_on("mrnet@5.0.1:+lwthreads+krellpatch") depends_on("xerces-c@3.1.1:") depends_on("cbtf") depends_on("cbtf-krell") parallel = False + def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions): + # Sets build type parameters into cmakeOptions the options that will enable the cbtf-krell built type settings + + compile_flags="-O2 -g" + BuildTypeOptions = [] + # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the stdcmakeargs + for word in cmakeOptions[:]: + if word.startswith('-DCMAKE_BUILD_TYPE'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_CXX_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_C_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_VERBOSE_MAKEFILE'): + cmakeOptions.remove(word) + BuildTypeOptions.extend([ + '-DCMAKE_VERBOSE_MAKEFILE=ON', + '-DCMAKE_BUILD_TYPE=None', + '-DCMAKE_CXX_FLAGS=%s' % compile_flags, + '-DCMAKE_C_FLAGS=%s' % compile_flags + ]) + + cmakeOptions.extend(BuildTypeOptions) + def install(self, spec, prefix): # Add in paths for finding package config files that tell us where to find these packages cmake_prefix_path = join_path(spec['cbtf'].prefix) + ':' + join_path(spec['cbtf-krell'].prefix) with working_dir('build', create=True): - cmake('..', - '-DCBTF_DIR=%s' % spec['cbtf'].prefix, - '-DCBTF_KRELL_DIR=%s' % spec['cbtf-krell'].prefix, - '-DMRNET_DIR=%s' % spec['mrnet'].prefix, - '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, - '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, - '-DCMAKE_MODULE_PATH=%s' % join_path(prefix.share,'KrellInstitute','cmake'), - *std_cmake_args) - - make("clean") - make() - make("install") + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DCBTF_DIR=%s' % spec['cbtf'].prefix, + '-DCBTF_KRELL_DIR=%s' % spec['cbtf-krell'].prefix, + '-DMRNET_DIR=%s' % spec['mrnet'].prefix, + '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, + '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, + '-DCMAKE_MODULE_PATH=%s' % join_path(prefix.share,'KrellInstitute','cmake') + ]) + + # Add in the standard cmake arguments + cmakeOptions.extend(std_cmake_args) + + # Adjust the standard cmake arguments to what we want the build type, etc to be + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + # Invoke cmake + cmake('..', *cmakeOptions) + + make("clean") + make() + make("install") diff --git a/var/spack/repos/builtin/packages/cbtf/package.py b/var/spack/repos/builtin/packages/cbtf/package.py index 52e6a07020..7ce1cd382b 100644 --- a/var/spack/repos/builtin/packages/cbtf/package.py +++ b/var/spack/repos/builtin/packages/cbtf/package.py @@ -1,5 +1,5 @@ ################################################################################ -# Copyright (c) 2015 Krell Institute. All Rights Reserved. +# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved. # # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software @@ -25,21 +25,44 @@ class Cbtf(Package): homepage = "http://sourceforge.net/p/cbtf/wiki/Home" # Mirror access template example - #url = "file:/g/g24/jeg/cbtf-1.5.tar.gz" - #version('1.6', '1ca88a8834759c4c74452cb97fe7b70a') + #url = "file:/home/jeg/cbtf-1.6.tar.gz" + #version('1.6', 'c1ef4e5aa4e470dffb042abdba0b9987') # Use when the git repository is available - version('1.6', branch='master', git='http://git.code.sf.net/p/cbtf/cbtf') + version('1.6', branch='master', git='https://github.com/OpenSpeedShop/cbtf.git') - depends_on("cmake") - #depends_on("boost@1.42.0:") - depends_on("boost@1.50.0") - depends_on("mrnet@4.1.0+lwthreads") + variant('runtime', default=False, description="build only the runtime libraries and collectors.") + + depends_on("cmake@3.0.2") + depends_on("boost@1.50.0:") + depends_on("mrnet@5.0.1:+lwthreads+krellpatch") depends_on("xerces-c@3.1.1:") - depends_on("libxml2") + # Work around for spack libxml2 package bug, take off python when fixed + depends_on("libxml2+python") parallel = False + def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions): + # Sets build type parameters into cmakeOptions the options that will enable the cbtf-krell built type settings + + compile_flags="-O2 -g" + BuildTypeOptions = [] + # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the stdcmakeargs + for word in cmakeOptions[:]: + if word.startswith('-DCMAKE_BUILD_TYPE'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_CXX_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_C_FLAGS'): + cmakeOptions.remove(word) + BuildTypeOptions.extend([ + '-DCMAKE_BUILD_TYPE=None', + '-DCMAKE_CXX_FLAGS=%s' % compile_flags, + '-DCMAKE_C_FLAGS=%s' % compile_flags + ]) + + cmakeOptions.extend(BuildTypeOptions) + def install(self, spec, prefix): with working_dir('build', create=True): @@ -48,14 +71,45 @@ class Cbtf(Package): # or BOOST_INCLUDEDIR). Useful when specifying BOOST_ROOT. # Defaults to OFF. - cmake('..', - '--debug-output', - '-DBoost_NO_SYSTEM_PATHS=TRUE', - '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, - '-DBOOST_ROOT=%s' % spec['boost'].prefix, - '-DMRNET_DIR=%s' % spec['mrnet'].prefix, - '-DCMAKE_MODULE_PATH=%s' % join_path(prefix.share,'KrellInstitute','cmake'), - *std_cmake_args) + if '+runtime' in spec: + # Install message tag include file for use in Intel MIC cbtf-krell build + # FIXME + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DBoost_NO_SYSTEM_PATHS=TRUE', + '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, + '-DBOOST_ROOT=%s' % spec['boost'].prefix, + '-DMRNET_DIR=%s' % spec['mrnet'].prefix, + '-DCMAKE_MODULE_PATH=%s' % join_path(prefix.share,'KrellInstitute','cmake') + ]) + + # Add in the standard cmake arguments + cmakeOptions.extend(std_cmake_args) + + # Adjust the standard cmake arguments to what we want the build type, etc to be + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + # Invoke cmake + cmake('..', *cmakeOptions) + + else: + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DBoost_NO_SYSTEM_PATHS=TRUE', + '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, + '-DBOOST_ROOT=%s' % spec['boost'].prefix, + '-DMRNET_DIR=%s' % spec['mrnet'].prefix, + '-DCMAKE_MODULE_PATH=%s' % join_path(prefix.share,'KrellInstitute','cmake') + ]) + + # Add in the standard cmake arguments + cmakeOptions.extend(std_cmake_args) + + # Adjust the standard cmake arguments to what we want the build type, etc to be + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + # Invoke cmake + cmake('..', *cmakeOptions) make("clean") make() diff --git a/var/spack/repos/builtin/packages/cereal/package.py b/var/spack/repos/builtin/packages/cereal/package.py index a83927456f..6acbf666c8 100644 --- a/var/spack/repos/builtin/packages/cereal/package.py +++ b/var/spack/repos/builtin/packages/cereal/package.py @@ -1,4 +1,5 @@ from spack import * +import os import shutil class Cereal(Package): @@ -30,5 +31,8 @@ class Cereal(Package): # Install shutil.rmtree(join_path(prefix, 'doc'), ignore_errors=True) shutil.rmtree(join_path(prefix, 'include'), ignore_errors=True) + shutil.rmtree(join_path(prefix, 'lib'), ignore_errors=True) shutil.copytree('doc', join_path(prefix, 'doc'), symlinks=True) shutil.copytree('include', join_path(prefix, 'include'), symlinks=True) + # Create empty directory to avoid linker warnings later + os.mkdir(join_path(prefix, 'lib')) diff --git a/var/spack/repos/builtin/packages/cmake/package.py b/var/spack/repos/builtin/packages/cmake/package.py index 91a4e3b415..2493cf0a13 100644 --- a/var/spack/repos/builtin/packages/cmake/package.py +++ b/var/spack/repos/builtin/packages/cmake/package.py @@ -30,6 +30,7 @@ class Cmake(Package): homepage = 'https://www.cmake.org' url = 'https://cmake.org/files/v3.4/cmake-3.4.3.tar.gz' + version('3.5.2', '701386a1b5ec95f8d1075ecf96383e02') version('3.5.1', 'ca051f4a66375c89d1a524e726da0296') version('3.5.0', '33c5d09d4c33d4ffcc63578a6ba8777e') version('3.4.3', '4cb3ff35b2472aae70f542116d616e63') diff --git a/var/spack/repos/builtin/packages/cnmem/package.py b/var/spack/repos/builtin/packages/cnmem/package.py new file mode 100644 index 0000000000..0a83e8fc20 --- /dev/null +++ b/var/spack/repos/builtin/packages/cnmem/package.py @@ -0,0 +1,12 @@ +from spack import * + +class Cnmem(Package): + """CNMem mempool for CUDA devices""" + homepage = "https://github.com/NVIDIA/cnmem" + + version('git', git='https://github.com/NVIDIA/cnmem.git', branch="master") + + def install(self, spec, prefix): + cmake('.',*std_cmake_args) + make() + make('install') diff --git a/var/spack/repos/builtin/packages/cryptopp/package.py b/var/spack/repos/builtin/packages/cryptopp/package.py index bc83cb2b65..c2778e14da 100644 --- a/var/spack/repos/builtin/packages/cryptopp/package.py +++ b/var/spack/repos/builtin/packages/cryptopp/package.py @@ -13,6 +13,7 @@ class Cryptopp(Package): version('5.6.3', '3c5b70e2ec98b7a24988734446242d07') version('5.6.2', '7ed022585698df48e65ce9218f6c6a67') + version('5.6.1', '96cbeba0907562b077e26bcffb483828') def install(self, spec, prefix): make() diff --git a/var/spack/repos/builtin/packages/dealii/package.py b/var/spack/repos/builtin/packages/dealii/package.py index b251d50ca1..df8330384d 100644 --- a/var/spack/repos/builtin/packages/dealii/package.py +++ b/var/spack/repos/builtin/packages/dealii/package.py @@ -12,6 +12,7 @@ class Dealii(Package): variant('mpi', default=True, description='Compile with MPI') variant('arpack', default=True, description='Compile with Arpack and PArpack (only with MPI)') variant('doc', default=False, description='Compile with documentation') + variant('gsl' , default=True, description='Compile with GSL') variant('hdf5', default=True, description='Compile with HDF5 (only with MPI)') variant('metis', default=True, description='Compile with Metis') variant('netcdf', default=True, description='Compile with Netcdf (only with MPI)') @@ -39,6 +40,8 @@ class Dealii(Package): depends_on ("mpi", when="+mpi") depends_on ("arpack-ng+mpi", when='+arpack+mpi') depends_on ("doxygen", when='+doc') + depends_on ("gsl", when='@8.5.0:+gsl') + depends_on ("gsl", when='@dev+gsl') depends_on ("hdf5+mpi~cxx", when='+hdf5+mpi') #FIXME NetCDF declares dependency with ~cxx, why? depends_on ("metis@5:", when='+metis') depends_on ("netcdf+mpi", when="+netcdf+mpi") @@ -50,8 +53,8 @@ class Dealii(Package): depends_on ("trilinos", when='+trilinos+mpi') # developer dependnecies - #depends_on ("numdiff") #FIXME - #depends_on ("astyle") #FIXME + depends_on ("numdiff", when='@dev') + depends_on ("astyle@2.04", when='@dev') def install(self, spec, prefix): options = [] @@ -80,7 +83,6 @@ class Dealii(Package): (join_path(spec['lapack'].prefix.lib,'liblapack.%s' % dsuf), # FIXME don't hardcode names join_path(spec['blas'].prefix.lib,'libblas.%s' % dsuf)), # FIXME don't hardcode names '-DMUPARSER_DIR=%s ' % spec['muparser'].prefix, - '-DP4EST_DIR=%s' % spec['p4est'].prefix, '-DUMFPACK_DIR=%s' % spec['suite-sparse'].prefix, '-DTBB_DIR=%s' % spec['tbb'].prefix, '-DZLIB_DIR=%s' % spec['zlib'].prefix @@ -100,7 +102,7 @@ class Dealii(Package): ]) # Optional dependencies for which librariy names are the same as CMake variables - for library in ('hdf5', 'p4est','petsc', 'slepc','trilinos','metis'): + for library in ('gsl','hdf5','p4est','petsc','slepc','trilinos','metis'): if library in spec: options.extend([ '-D{library}_DIR={value}'.format(library=library.upper(), value=spec[library].prefix), @@ -251,3 +253,6 @@ class Dealii(Package): cmake('.') make('release') make('run',parallel=False) + + def setup_environment(self, spack_env, env): + env.set('DEAL_II_DIR', self.prefix) diff --git a/var/spack/repos/builtin/packages/dia/package.py b/var/spack/repos/builtin/packages/dia/package.py index 1cb5910e46..25d5f08205 100644 --- a/var/spack/repos/builtin/packages/dia/package.py +++ b/var/spack/repos/builtin/packages/dia/package.py @@ -7,6 +7,7 @@ class Dia(Package): version('0.97.3', '0e744a0f6a6c4cb6a089e4d955392c3c') + depends_on('intltool') depends_on('gtkplus@2.6.0:') depends_on('cairo') #depends_on('libart') # optional dependency, not yet supported by spack. diff --git a/var/spack/repos/builtin/packages/eigen/package.py b/var/spack/repos/builtin/packages/eigen/package.py index 1501989812..6b38ab0261 100644 --- a/var/spack/repos/builtin/packages/eigen/package.py +++ b/var/spack/repos/builtin/packages/eigen/package.py @@ -45,6 +45,7 @@ class Eigen(Package): # TODO : dependency on googlehash, superlu, adolc missing + depends_on('cmake') depends_on('metis@5:', when='+metis') depends_on('scotch', when='+scotch') depends_on('fftw', when='+fftw') diff --git a/var/spack/repos/builtin/packages/flex/package.py b/var/spack/repos/builtin/packages/flex/package.py index b065904912..e4795893e0 100644 --- a/var/spack/repos/builtin/packages/flex/package.py +++ b/var/spack/repos/builtin/packages/flex/package.py @@ -6,6 +6,7 @@ class Flex(Package): homepage = "http://flex.sourceforge.net/" url = "http://download.sourceforge.net/flex/flex-2.5.39.tar.gz" + version('2.6.0', '5724bcffed4ebe39e9b55a9be80859ec') version('2.5.39', 'e133e9ead8ec0a58d81166b461244fde') def install(self, spec, prefix): diff --git a/var/spack/repos/builtin/packages/gcc/package.py b/var/spack/repos/builtin/packages/gcc/package.py index 6043b62279..8f90757232 100644 --- a/var/spack/repos/builtin/packages/gcc/package.py +++ b/var/spack/repos/builtin/packages/gcc/package.py @@ -38,6 +38,7 @@ class Gcc(Package): list_url = 'http://open-source-box.org/gcc/' list_depth = 2 + version('6.1.0', '8fb6cb98b8459f5863328380fbf06bd1') version('5.3.0', 'c9616fd448f980259c31de613e575719') version('5.2.0', 'a51bcfeb3da7dd4c623e27207ed43467') version('4.9.3', '6f831b4d251872736e8e9cc09746f327') diff --git a/var/spack/repos/builtin/packages/gdb/package.py b/var/spack/repos/builtin/packages/gdb/package.py index b346fe80c2..0e9e8fc099 100644 --- a/var/spack/repos/builtin/packages/gdb/package.py +++ b/var/spack/repos/builtin/packages/gdb/package.py @@ -34,6 +34,7 @@ class Gdb(Package): homepage = "https://www.gnu.org/software/gdb" url = "http://ftp.gnu.org/gnu/gdb/gdb-7.10.tar.gz" + version('7.11', 'f585059252836a981ea5db9a5f8ce97f') version('7.10.1', 'b93a2721393e5fa226375b42d567d90b') version('7.10', 'fa6827ad0fd2be1daa418abb11a54d86') version('7.9.1', 'f3b97de919a9dba84490b2e076ec4cb0') diff --git a/var/spack/repos/builtin/packages/git/package.py b/var/spack/repos/builtin/packages/git/package.py index 388f84aefd..77521fd658 100644 --- a/var/spack/repos/builtin/packages/git/package.py +++ b/var/spack/repos/builtin/packages/git/package.py @@ -7,7 +7,8 @@ class Git(Package): homepage = "http://git-scm.com" url = "https://github.com/git/git/tarball/v2.7.1" - version('2.8.0-rc2', 'c2cf9f2cc70e35f2fafbaf9258f82e4c') + version('2.8.1', '1308448d95afa41a4135903f22262fc8') + version('2.8.0', 'eca687e46e9750121638f258cff8317b') version('2.7.3', 'fa1c008b56618c355a32ba4a678305f6') version('2.7.1', 'bf0706b433a8dedd27a63a72f9a66060') @@ -23,18 +24,10 @@ class Git(Package): #version('2.2.1', 'ff41fdb094eed1ec430aed8ee9b9849c') - # Git compiles with curl support by default on but if your system - # does not have it you will not be able to clone https repos - variant("curl", default=False, description="Add the internal support of curl for https clone") - - # Git compiles with expat support by default on but if your system - # does not have it you will not be able to push https repos - variant("expat", default=False, description="Add the internal support of expat for https push") - depends_on("openssl") depends_on("autoconf") - depends_on("curl", when="+curl") - depends_on("expat", when="+expat") + depends_on("curl") + depends_on("expat") # Also depends_on gettext: apt-get install gettext (Ubuntu) @@ -49,23 +42,12 @@ class Git(Package): "--prefix=%s" % prefix, "--without-pcre", "--with-openssl=%s" % spec['openssl'].prefix, - "--with-zlib=%s" % spec['zlib'].prefix + "--with-zlib=%s" % spec['zlib'].prefix, + "--with-curl=%s" % spec['curl'].prefix, + "--with-expat=%s" % spec['expat'].prefix, ] - if '+curl' in spec: - configure_args.append("--with-curl=%s" % spec['curl'].prefix) - - if '+expat' in spec: - configure_args.append("--with-expat=%s" % spec['expat'].prefix) - which('autoreconf')('-i') configure(*configure_args) make() make("install") - - - - - - - diff --git a/var/spack/repos/builtin/packages/glib/package.py b/var/spack/repos/builtin/packages/glib/package.py index 67ead5f941..a3fc3f79eb 100644 --- a/var/spack/repos/builtin/packages/glib/package.py +++ b/var/spack/repos/builtin/packages/glib/package.py @@ -1,4 +1,5 @@ from spack import * +import sys class Glib(Package): """The GLib package contains a low-level libraries useful for @@ -12,6 +13,8 @@ class Glib(Package): depends_on("libffi") depends_on("zlib") + depends_on("pkg-config") + depends_on('gettext', sys.platform=='darwin') def install(self, spec, prefix): configure("--prefix=%s" % prefix) diff --git a/var/spack/repos/builtin/packages/glm/package.py b/var/spack/repos/builtin/packages/glm/package.py index d00c301b4c..ecae89f1e8 100644 --- a/var/spack/repos/builtin/packages/glm/package.py +++ b/var/spack/repos/builtin/packages/glm/package.py @@ -11,6 +11,8 @@ class Glm(Package): url = "https://github.com/g-truc/glm/archive/0.9.7.1.tar.gz" version('0.9.7.1', '61af6639cdf652d1cdd7117190afced8') + + depends_on ("cmake") def install(self, spec, prefix): with working_dir('spack-build', create=True): diff --git a/var/spack/repos/builtin/packages/gmp/package.py b/var/spack/repos/builtin/packages/gmp/package.py index fe13de3b95..85e9c237d6 100644 --- a/var/spack/repos/builtin/packages/gmp/package.py +++ b/var/spack/repos/builtin/packages/gmp/package.py @@ -35,6 +35,8 @@ class Gmp(Package): version('6.0.0a', 'b7ff2d88cae7f8085bd5006096eed470') version('6.0.0' , '6ef5869ae735db9995619135bd856b84') + depends_on("m4") + def install(self, spec, prefix): configure("--prefix=%s" % prefix) make() diff --git a/var/spack/repos/builtin/packages/gmsh/package.py b/var/spack/repos/builtin/packages/gmsh/package.py index 9d759303cb..5f659c56df 100644 --- a/var/spack/repos/builtin/packages/gmsh/package.py +++ b/var/spack/repos/builtin/packages/gmsh/package.py @@ -63,6 +63,11 @@ class Gmsh(Package): build_directory = join_path(self.stage.path, 'spack-build') source_directory = self.stage.source_path + options.append('-DCMAKE_INSTALL_NAME_DIR:PATH=%s/lib' % prefix) + + # Prevent GMsh from using its own strange directory structure on OSX + options.append('-DENABLE_OS_SPECIFIC_INSTALL=OFF') + if '+shared' in spec: options.extend(['-DENABLE_BUILD_SHARED:BOOL=ON', '-DENABLE_BUILD_DYNAMIC:BOOL=ON']) # Builds dynamic executable and installs shared library diff --git a/var/spack/repos/builtin/packages/hdf5/package.py b/var/spack/repos/builtin/packages/hdf5/package.py index cce609eb29..470969832f 100644 --- a/var/spack/repos/builtin/packages/hdf5/package.py +++ b/var/spack/repos/builtin/packages/hdf5/package.py @@ -38,7 +38,7 @@ class Hdf5(Package): list_depth = 3 version('1.10.0', 'bdc935337ee8282579cd6bc4270ad199') - version('1.8.16', 'b8ed9a36ae142317f88b0c7ef4b9c618') + version('1.8.16', 'b8ed9a36ae142317f88b0c7ef4b9c618', preferred=True) version('1.8.15', '03cccb5b33dbe975fdcd8ae9dc021f24') version('1.8.13', 'c03426e9e77d7766944654280b467289') diff --git a/var/spack/repos/builtin/packages/hwloc/package.py b/var/spack/repos/builtin/packages/hwloc/package.py index ab7205646e..a461a7482c 100644 --- a/var/spack/repos/builtin/packages/hwloc/package.py +++ b/var/spack/repos/builtin/packages/hwloc/package.py @@ -17,6 +17,7 @@ class Hwloc(Package): list_url = "http://www.open-mpi.org/software/hwloc/" list_depth = 3 + version('1.11.3', 'c1d36a9de6028eac1d18ea4782ef958f') version('1.11.2', 'e4ca55c2a5c5656da4a4e37c8fc51b23') version('1.11.1', 'feb4e416a1b25963ed565d8b42252fdc') version('1.9', '1f9f9155682fe8946a97c08896109508') diff --git a/var/spack/repos/builtin/packages/hydra/package.py b/var/spack/repos/builtin/packages/hydra/package.py new file mode 100644 index 0000000000..c1b8868276 --- /dev/null +++ b/var/spack/repos/builtin/packages/hydra/package.py @@ -0,0 +1,21 @@ +from spack import * + +class Hydra(Package): + """Hydra is a process management system for starting parallel jobs. + Hydra is designed to natively work with existing launcher daemons + (such as ssh, rsh, fork), as well as natively integrate with resource + management systems (such as slurm, pbs, sge).""" + + homepage = "http://www.mpich.org" + url = "http://www.mpich.org/static/downloads/3.2/hydra-3.2.tar.gz" + list_url = "http://www.mpich.org/static/downloads/" + list_depth = 2 + + version('3.2', '4d670916695bf7e3a869cc336a881b39') + + + def install(self, spec, prefix): + configure('--prefix=%s' % prefix) + + make() + make("install") diff --git a/var/spack/repos/builtin/packages/intltool/package.py b/var/spack/repos/builtin/packages/intltool/package.py new file mode 100644 index 0000000000..9b3c095378 --- /dev/null +++ b/var/spack/repos/builtin/packages/intltool/package.py @@ -0,0 +1,19 @@ +from spack import * + +class Intltool(Package): + """intltool is a set of tools to centralize translation of many different file formats using GNU gettext-compatible PO files.""" + homepage = 'https://freedesktop.org/wiki/Software/intltool/' + + version('0.51.0', '12e517cac2b57a0121cda351570f1e63') + + def url_for_version(self, version): + """Handle version-based custom URLs.""" + return 'https://launchpad.net/intltool/trunk/%s/+download/intltool-%s.tar.gz' % (version, version) + + def install(self, spec, prefix): + + # configure, build, install: + options = ['--prefix=%s' % prefix ] + configure(*options) + make() + make('install') diff --git a/var/spack/repos/builtin/packages/ior/package.py b/var/spack/repos/builtin/packages/ior/package.py new file mode 100644 index 0000000000..c46650a674 --- /dev/null +++ b/var/spack/repos/builtin/packages/ior/package.py @@ -0,0 +1,42 @@ +from spack import * +import os + +class Ior(Package): + """The IOR software is used for benchmarking parallel file systems + using POSIX, MPI-IO, or HDF5 interfaces.""" + + homepage = "https://github.com/LLNL/ior" + url = "https://github.com/LLNL/ior/archive/3.0.1.tar.gz" + + version('3.0.1', '71150025e0bb6ea1761150f48b553065') + + variant('hdf5', default=False, description='support IO with HDF5 backend') + variant('ncmpi', default=False, description='support IO with NCMPI backend') + + depends_on('mpi') + depends_on('hdf5+mpi', when='+hdf5') + depends_on('netcdf+mpi', when='+ncmpi') + + + def install(self, spec, prefix): + os.system('./bootstrap') + + config_args = [ + 'MPICC=%s' % spec['mpi'].prefix.bin + '/mpicc', + '--prefix=%s' % prefix, + ] + + if '+hdf5' in spec: + config_args.append('--with-hdf5') + else: + config_args.append('--without-hdf5') + + if '+ncmpi' in spec: + config_args.append('--with-ncmpi') + else: + config_args.append('--without-ncmpi') + + configure(*config_args) + + make() + make('install') diff --git a/var/spack/repos/builtin/packages/jemalloc/package.py b/var/spack/repos/builtin/packages/jemalloc/package.py index 8cec9ea75b..9cb0fd1f40 100644 --- a/var/spack/repos/builtin/packages/jemalloc/package.py +++ b/var/spack/repos/builtin/packages/jemalloc/package.py @@ -5,6 +5,7 @@ class Jemalloc(Package): homepage = "http://www.canonware.com/jemalloc/" url = "https://github.com/jemalloc/jemalloc/releases/download/4.0.4/jemalloc-4.0.4.tar.bz2" + version('4.1.0', 'c4e53c947905a533d5899e5cc3da1f94') version('4.0.4', '687c5cc53b9a7ab711ccd680351ff988') variant('stats', default=False, description='Enable heap statistics') @@ -20,5 +21,8 @@ class Jemalloc(Package): configure(*configure_args) + # Don't use -Werror + filter_file(r'-Werror=\S*', '', 'Makefile') + make() make("install") diff --git a/var/spack/repos/builtin/packages/jpeg/package.py b/var/spack/repos/builtin/packages/jpeg/package.py index 87820467db..2f15e59ad4 100644 --- a/var/spack/repos/builtin/packages/jpeg/package.py +++ b/var/spack/repos/builtin/packages/jpeg/package.py @@ -1,14 +1,19 @@ from spack import * class Jpeg(Package): - """jpeg library""" + """libjpeg is a widely used free library with functions for handling the + JPEG image data format. It implements a JPEG codec (encoding and decoding) + alongside various utilities for handling JPEG data.""" + homepage = "http://www.ijg.org" - url = "http://www.ijg.org/files/jpegsrc.v9a.tar.gz" + url = "http://www.ijg.org/files/jpegsrc.v9b.tar.gz" + version('9b', '6a9996ce116ec5c52b4870dbcd6d3ddb') version('9a', '3353992aecaee1805ef4109aadd433e7') def install(self, spec, prefix): configure("--prefix=%s" % prefix) make() + make("test") make("install") diff --git a/var/spack/repos/builtin/packages/kripke/package.py b/var/spack/repos/builtin/packages/kripke/package.py new file mode 100644 index 0000000000..7d067ea44d --- /dev/null +++ b/var/spack/repos/builtin/packages/kripke/package.py @@ -0,0 +1,32 @@ +from spack import * + +class Kripke(Package): + """Kripke is a simple, scalable, 3D Sn deterministic particle + transport proxy/mini app. + """ + homepage = "https://codesign.llnl.gov/kripke.php" + url = "https://codesign.llnl.gov/downloads/kripke-openmp-1.1.tar.gz" + + version('1.1', '7fe6f2b26ed983a6ce5495ab701f85bf') + + variant('mpi', default=True, description='Build with MPI.') + variant('openmp', default=True, description='Build with OpenMP enabled.') + + depends_on('mpi', when="+mpi") + + def install(self, spec, prefix): + with working_dir('build', create=True): + def enabled(variant): + return (1 if variant in spec else 0) + + cmake('-DCMAKE_INSTALL_PREFIX:PATH=.', + '-DENABLE_OPENMP=%d' % enabled('+openmp'), + '-DENABLE_MPI=%d' % enabled('+mpi'), + '..', + *std_cmake_args) + make() + + # Kripke does not provide install target, so we have to copy + # things into place. + mkdirp(prefix.bin) + install('kripke', prefix.bin) diff --git a/var/spack/repos/builtin/packages/libtermkey/package.py b/var/spack/repos/builtin/packages/libtermkey/package.py new file mode 100644 index 0000000000..7f25edaf76 --- /dev/null +++ b/var/spack/repos/builtin/packages/libtermkey/package.py @@ -0,0 +1,17 @@ +from spack import * + +class Libtermkey(Package): + """Easy keyboard entry processing for terminal programs""" + homepage = "http://www.leonerd.org.uk/code/libtermkey/" + url = "http://www.leonerd.org.uk/code/libtermkey/libtermkey-0.18.tar.gz" + + version('0.18' , '3be2e3e5a851a49cc5e8567ac108b520') + version('0.17' , '20edb99e0d95ec1690fe90e6a555ae6d') + version('0.16' , '7a24b675aaeb142d30db28e7554987d4') + version('0.15b', '27689756e6c86c56ae454f2ac259bc3d') + version('0.14' , 'e08ce30f440f9715c459060e0e048978') + + + def install(self, spec, prefix): + make() + make("install", "PREFIX=" + prefix) diff --git a/var/spack/repos/builtin/packages/libtool/package.py b/var/spack/repos/builtin/packages/libtool/package.py index 82a54953b2..c804f5ab5d 100644 --- a/var/spack/repos/builtin/packages/libtool/package.py +++ b/var/spack/repos/builtin/packages/libtool/package.py @@ -8,6 +8,8 @@ class Libtool(Package): version('2.4.6' , 'addf44b646ddb4e3919805aa88fa7c5e') version('2.4.2' , 'd2f3b7d4627e69e13514a40e72a24d50') + depends_on('m4') + def install(self, spec, prefix): configure("--prefix=%s" % prefix) diff --git a/var/spack/repos/builtin/packages/libuv/package.py b/var/spack/repos/builtin/packages/libuv/package.py new file mode 100644 index 0000000000..eace94d1a6 --- /dev/null +++ b/var/spack/repos/builtin/packages/libuv/package.py @@ -0,0 +1,21 @@ +from spack import * + +class Libuv(Package): + """Multi-platform library with a focus on asynchronous IO""" + homepage = "http://libuv.org" + url = "https://github.com/libuv/libuv/archive/v1.9.0.tar.gz" + + version('1.9.0', '14737f9c76123a19a290dabb7d1cd04c') + + depends_on('automake') + depends_on('autoconf') + depends_on('libtool') + + def install(self, spec, prefix): + bash = which("bash") + bash('autogen.sh') + configure('--prefix=%s' % prefix) + + make() + make("check") + make("install") diff --git a/var/spack/repos/builtin/packages/libvterm/package.py b/var/spack/repos/builtin/packages/libvterm/package.py new file mode 100644 index 0000000000..3212f6550d --- /dev/null +++ b/var/spack/repos/builtin/packages/libvterm/package.py @@ -0,0 +1,12 @@ +from spack import * + +class Libvterm(Package): + """An abstract library implementation of a terminal emulator""" + homepage = "http://www.leonerd.org.uk/code/libvterm/" + url = "http://www.leonerd.org.uk/code/libvterm/libvterm-0+bzr681.tar.gz" + + version('681', '7a4325a7350b7092245c04e8ee185ac3') + + def install(self, spec, prefix): + make() + make("install", "PREFIX=" + prefix) diff --git a/var/spack/repos/builtin/packages/libxcb/package.py b/var/spack/repos/builtin/packages/libxcb/package.py index d7d94c4546..b2543be5da 100644 --- a/var/spack/repos/builtin/packages/libxcb/package.py +++ b/var/spack/repos/builtin/packages/libxcb/package.py @@ -13,6 +13,7 @@ class Libxcb(Package): version('1.11.1', '118623c15a96b08622603a71d8789bf3') depends_on("python") depends_on("xcb-proto") + depends_on("pkg-config") # depends_on('pthread') # Ubuntu: apt-get install libpthread-stubs0-dev # depends_on('xau') # Ubuntu: apt-get install libxau-dev diff --git a/var/spack/repos/builtin/packages/metis/package.py b/var/spack/repos/builtin/packages/metis/package.py index 41e3ebb429..b05f23a3dc 100644 --- a/var/spack/repos/builtin/packages/metis/package.py +++ b/var/spack/repos/builtin/packages/metis/package.py @@ -136,6 +136,7 @@ class Metis(Package): source_directory = self.stage.source_path options.append('-DGKLIB_PATH:PATH={metis_source}/GKlib'.format(metis_source=source_directory)) + options.append('-DCMAKE_INSTALL_NAME_DIR:PATH=%s/lib' % prefix) if '+shared' in spec: options.append('-DSHARED:BOOL=ON') @@ -184,7 +185,3 @@ class Metis(Package): fs = glob.glob(join_path(source_directory,'GKlib',"*.h")) for f in fs: install(f, GKlib_dist) - - # The shared library is not installed correctly on Darwin; correct this - if (sys.platform == 'darwin') and ('+shared' in spec): - fix_darwin_install_name(prefix.lib) diff --git a/var/spack/repos/builtin/packages/mfem/package.py b/var/spack/repos/builtin/packages/mfem/package.py new file mode 100644 index 0000000000..510e09c4e1 --- /dev/null +++ b/var/spack/repos/builtin/packages/mfem/package.py @@ -0,0 +1,125 @@ +from spack import * +import glob, string + +class Mfem(Package): + """Free, lightweight, scalable C++ library for finite element methods.""" + + homepage = 'http://www.mfem.org' + url = 'https://github.com/mfem/mfem' + +# version('3.1', git='https://github.com/mfem/mfem.git', +# commit='dbae60fe32e071989b52efaaf59d7d0eb2a3b574') + + version('3.1', '841ea5cf58de6fae4de0f553b0e01ebaab9cd9c67fa821e8a715666ecf18fc57', + url='http://goo.gl/xrScXn', expand=False) + + variant('metis', default=False, description='Activate support for metis') + variant('hypre', default=False, description='Activate support for hypre') + variant('suite-sparse', default=False, + description='Activate support for SuiteSparse') + variant('mpi', default=False, description='Activate support for MPI') + variant('lapack', default=False, description='Activate support for LAPACK') + variant('debug', default=False, description='Build debug version') + + depends_on('blas', when='+lapack') + depends_on('lapack', when='+lapack') + + depends_on('mpi', when='+mpi') + depends_on('metis', when='+mpi') + depends_on('hypre', when='+mpi') + + depends_on('hypre', when='+hypre') + + depends_on('metis@4:', when='+metis') + + depends_on('suite-sparse', when='+suite-sparse') + depends_on('blas', when='+suite-sparse') + depends_on('lapack', when='+suite-sparse') + depends_on('metis@5:', when='+suite-sparse ^suite-sparse@4.5:') + depends_on('cmake', when='^metis@5:') + + def check_variants(self, spec): + if '+mpi' in spec and ('+hypre' not in spec or '+metis' not in spec): + raise InstallError('mfem+mpi must be built with +hypre ' + + 'and +metis!') + if '+suite-sparse' in spec and ('+metis' not in spec or + '+lapack' not in spec): + raise InstallError('mfem+suite-sparse must be built with ' + + '+metis and +lapack!') + if 'metis@5:' in spec and '%clang' in spec and ('^cmake %gcc' not in spec): + raise InstallError('To work around CMake bug with clang, must ' + + 'build mfem with mfem[+variants] %clang ' + + '^cmake %gcc to force CMake to build with gcc') + return + + def install(self, spec, prefix): + self.check_variants(spec) + + options = ['PREFIX=%s' % prefix] + + if '+lapack' in spec: + lapack_lib = '-L{0} -llapack -L{1} -lblas'.format( + spec['lapack'].prefix.lib, spec['blas'].prefix.lib) + options.extend(['MFEM_USE_LAPACK=YES', + 'LAPACK_OPT=-I%s' % spec['lapack'].prefix.include, + 'LAPACK_LIB=%s' % lapack_lib]) + + if '+hypre' in spec: + options.extend(['HYPRE_DIR=%s' % spec['hypre'].prefix, + 'HYPRE_OPT=-I%s' % spec['hypre'].prefix.include, + 'HYPRE_LIB=-L%s' % spec['hypre'].prefix.lib + + ' -lHYPRE']) + + if '+metis' in spec: + metis_lib = '-L%s -lmetis' % spec['metis'].prefix.lib + if spec['metis'].satisfies('@5:'): + metis_str = 'MFEM_USE_METIS_5=YES' + else: + metis_str = 'MFEM_USE_METIS_5=NO' + options.extend([metis_str, + 'METIS_DIR=%s' % spec['metis'].prefix, + 'METIS_OPT=-I%s' % spec['metis'].prefix.include, + 'METIS_LIB=%s' % metis_lib]) + + if '+mpi' in spec: options.extend(['MFEM_USE_MPI=YES']) + + if '+suite-sparse' in spec: + ssp = spec['suite-sparse'].prefix + ss_lib = '-L%s' % ssp.lib + ss_lib += (' -lumfpack -lcholmod -lcolamd -lamd -lcamd' + + ' -lccolamd -lsuitesparseconfig') + + no_librt_archs = ['darwin-i686', 'darwin-x86_64'] + no_rt = any(map(lambda a: spec.satisfies('='+a), no_librt_archs)) + if not no_rt: ss_lib += ' -lrt' + ss_lib += (' ' + metis_lib + ' ' + lapack_lib) + + options.extend(['MFEM_USE_SUITESPARSE=YES', + 'SUITESPARSE_DIR=%s' % ssp, + 'SUITESPARSE_OPT=-I%s' % ssp.include, + 'SUITESPARSE_LIB=%s' % ss_lib]) + + if '+debug' in spec: options.extend(['MFEM_DEBUG=YES']) + + # Dirty hack to cope with URL redirect + tgz_file = string.split(self.url,'/')[-1] + tar = which('tar') + tar('xzvf', tgz_file) + cd(glob.glob('mfem*')[0]) + # End dirty hack to cope with URL redirect + + make('config', *options) + make('all') + + # Run a small test before installation + args = ['-m', join_path('data','star.mesh'), '--no-visualization'] + if '+mpi' in spec: + Executable(join_path(spec['mpi'].prefix.bin, + 'mpirun'))('-np', + '4', + join_path('examples','ex1p'), + *args) + else: + Executable(join_path('examples', 'ex1'))(*args) + + make('install') diff --git a/var/spack/repos/builtin/packages/mpich/package.py b/var/spack/repos/builtin/packages/mpich/package.py index b317ec6651..2179086fe5 100644 --- a/var/spack/repos/builtin/packages/mpich/package.py +++ b/var/spack/repos/builtin/packages/mpich/package.py @@ -43,6 +43,8 @@ class Mpich(Package): version('3.0.4', '9c5d5d4fe1e17dd12153f40bc5b6dbc0') variant('verbs', default=False, description='Build support for OpenFabrics verbs.') + variant('pmi', default=True, description='Build with PMI support') + variant('hydra', default=True, description='Build the hydra process manager') provides('mpi@:3.0', when='@3:') provides('mpi@:1.3', when='@1:') @@ -55,12 +57,15 @@ class Mpich(Package): spack_env.set('MPICH_FC', spack_fc) def setup_dependent_package(self, module, dep_spec): - """For dependencies, make mpicc's use spack wrapper.""" - # FIXME : is this necessary ? Shouldn't this be part of a contract with MPI providers? - module.mpicc = join_path(self.prefix.bin, 'mpicc') + self.spec.mpicc = join_path(self.prefix.bin, 'mpicc') + self.spec.mpicxx = join_path(self.prefix.bin, 'mpic++') + self.spec.mpifc = join_path(self.prefix.bin, 'mpif90') + self.spec.mpif77 = join_path(self.prefix.bin, 'mpif77') def install(self, spec, prefix): config_args = ["--prefix=" + prefix, + "--with-pmi=" + ("yes" if '+pmi' in spec else 'no'), + "--with-pm=" + ('hydra' if '+hydra' in spec else 'no'), "--enable-shared"] # Variants diff --git a/var/spack/repos/builtin/packages/mrnet/package.py b/var/spack/repos/builtin/packages/mrnet/package.py index a3abb71285..b52233be4a 100644 --- a/var/spack/repos/builtin/packages/mrnet/package.py +++ b/var/spack/repos/builtin/packages/mrnet/package.py @@ -6,6 +6,7 @@ class Mrnet(Package): url = "ftp://ftp.cs.wisc.edu/paradyn/mrnet/mrnet_5.0.1.tar.gz" list_url = "http://ftp.cs.wisc.edu/paradyn/mrnet" + version('5.0.1-2', git='https://github.com/dyninst/mrnet.git', commit='20b1eacfc6d680d9f6472146d2dfaa0f900cc2e9') version('5.0.1', '17f65738cf1b9f9b95647ff85f69ecdd') version('4.1.0', '5a248298b395b329e2371bf25366115c') version('4.0.0', 'd00301c078cba57ef68613be32ceea2f') diff --git a/var/spack/repos/builtin/packages/msgpack-c/package.py b/var/spack/repos/builtin/packages/msgpack-c/package.py new file mode 100644 index 0000000000..a363bc89be --- /dev/null +++ b/var/spack/repos/builtin/packages/msgpack-c/package.py @@ -0,0 +1,14 @@ +from spack import * + +class MsgpackC(Package): + """A small, fast binary interchange format convertible to/from JSON""" + homepage = "http://www.msgpack.org" + url = "https://github.com/msgpack/msgpack-c/archive/cpp-1.4.1.tar.gz" + + version('1.4.1', 'e2fd3a7419b9bc49e5017fdbefab87e0') + + def install(self, spec, prefix): + cmake('.', *std_cmake_args) + + make() + make("install") diff --git a/var/spack/repos/builtin/packages/mvapich2/package.py b/var/spack/repos/builtin/packages/mvapich2/package.py index 3e60b517db..c68a04d251 100644 --- a/var/spack/repos/builtin/packages/mvapich2/package.py +++ b/var/spack/repos/builtin/packages/mvapich2/package.py @@ -147,6 +147,12 @@ class Mvapich2(Package): spack_env.set('MPICH_F90', spack_fc) spack_env.set('MPICH_FC', spack_fc) + def setup_dependent_package(self, module, dep_spec): + self.spec.mpicc = join_path(self.prefix.bin, 'mpicc') + self.spec.mpicxx = join_path(self.prefix.bin, 'mpicxx') + self.spec.mpifc = join_path(self.prefix.bin, 'mpif90') + self.spec.mpif77 = join_path(self.prefix.bin, 'mpif77') + def install(self, spec, prefix): # we'll set different configure flags depending on our environment configure_args = [ diff --git a/var/spack/repos/builtin/packages/nccmp/package.py b/var/spack/repos/builtin/packages/nccmp/package.py new file mode 100644 index 0000000000..72e86831c6 --- /dev/null +++ b/var/spack/repos/builtin/packages/nccmp/package.py @@ -0,0 +1,23 @@ +from spack import * + +class Nccmp(Package): + """Compare NetCDF Files""" + homepage = "http://nccmp.sourceforge.net/" + url = "http://downloads.sourceforge.net/project/nccmp/nccmp-1.8.2.0.tar.gz" + + version('1.8.2.0', '81e6286d4413825aec4327e61a28a580') + + depends_on('netcdf') + + def install(self, spec, prefix): + # Configure says: F90 and F90FLAGS are replaced by FC and + # FCFLAGS respectively in this configure, please unset + # F90/F90FLAGS and set FC/FCFLAGS instead and rerun configure + # again. + env.pop('F90', None) + env.pop('F90FLAGS', None) + + configure('--prefix=%s' % prefix) + make() + make("check") + make("install") diff --git a/var/spack/repos/builtin/packages/nco/package.py b/var/spack/repos/builtin/packages/nco/package.py new file mode 100644 index 0000000000..3a9aeaa656 --- /dev/null +++ b/var/spack/repos/builtin/packages/nco/package.py @@ -0,0 +1,30 @@ +from spack import * +import os + +class Nco(Package): + """The NCO toolkit manipulates and analyzes data stored in + netCDF-accessible formats""" + + homepage = "https://sourceforge.net/projects/nco" + url = "https://github.com/nco/nco/archive/4.5.5.tar.gz" + + version('4.5.5', '9f1f1cb149ad6407c5a03c20122223ce') + + # See "Compilation Requirements" at: + # http://nco.sourceforge.net/#bld + + depends_on('netcdf') + depends_on('antlr@2.7.7+cxx') # (required for ncap2) + depends_on('gsl') # (desirable for ncap2) + depends_on('udunits2') # (allows dimensional unit transformations) + # depends_on('opendap') # (enables network transparency), + + def install(self, spec, prefix): + opts = [ + '--prefix=%s' % prefix, + '--disable-openmp', # TODO: Make this a variant + '--disable-dap', # TODO: Make this a variant + '--disable-esmf'] + configure(*opts) + make() + make("install") diff --git a/var/spack/repos/builtin/packages/ncview/package.py b/var/spack/repos/builtin/packages/ncview/package.py new file mode 100644 index 0000000000..1aa13e3f03 --- /dev/null +++ b/var/spack/repos/builtin/packages/ncview/package.py @@ -0,0 +1,20 @@ +from spack import * + +class Ncview(Package): + """Simple viewer for NetCDF files.""" + homepage = "http://meteora.ucsd.edu/~pierce/ncview_home_page.html" + url = "ftp://cirrus.ucsd.edu/pub/ncview/ncview-2.1.7.tar.gz" + + version('2.1.7', 'debd6ca61410aac3514e53122ab2ba07') + + depends_on("netcdf") + depends_on("udunits2") + + # OS Dependencies + # Ubuntu: apt-get install libxaw7-dev + # CentOS 7: yum install libXaw-devel + + def install(self, spec, prefix): + configure('--prefix=%s' % prefix) + make() + make("install") diff --git a/var/spack/repos/builtin/packages/netcdf/package.py b/var/spack/repos/builtin/packages/netcdf/package.py index b60a2c4e9a..4aad0f6f3c 100644 --- a/var/spack/repos/builtin/packages/netcdf/package.py +++ b/var/spack/repos/builtin/packages/netcdf/package.py @@ -12,15 +12,19 @@ class Netcdf(Package): version('4.4.0', 'cffda0cbd97fdb3a06e9274f7aef438e') version('4.3.3', '5fbd0e108a54bd82cb5702a73f56d2ae') - variant('mpi', default=True, description='Enables MPI parallelism') - variant('hdf4', default=False, description="Enable HDF4 support") + variant('mpi', default=True, description='Enables MPI parallelism') + variant('hdf4', default=False, description='Enable HDF4 support') - # Dependencies: - depends_on("curl") # required for DAP support + depends_on("m4") depends_on("hdf", when='+hdf4') - depends_on("hdf5+mpi~cxx", when='+mpi') # required for NetCDF-4 support - depends_on("hdf5~mpi", when='~mpi') # required for NetCDF-4 support - depends_on("zlib") # required for NetCDF-4 support + + # Required for DAP support + depends_on("curl") + + # Required for NetCDF-4 support + depends_on("zlib") + depends_on("hdf5+mpi", when='+mpi') + depends_on("hdf5~mpi", when='~mpi') def install(self, spec, prefix): # Environment variables @@ -48,7 +52,7 @@ class Netcdf(Package): # /usr/lib/x86_64-linux-gnu/libcurl.so: undefined reference to `SSL_CTX_use_certificate_chain_file@OPENSSL_1.0.0' LIBS.append("-lcurl") CPPFLAGS.append("-I%s" % spec['curl'].prefix.include) - LDFLAGS.append ("-L%s" % spec['curl'].prefix.lib) + LDFLAGS.append( "-L%s" % spec['curl'].prefix.lib) if '+mpi' in spec: config_args.append('--enable-parallel4') diff --git a/var/spack/repos/builtin/packages/openblas/make.patch b/var/spack/repos/builtin/packages/openblas/make.patch new file mode 100644 index 0000000000..851214211a --- /dev/null +++ b/var/spack/repos/builtin/packages/openblas/make.patch @@ -0,0 +1,35 @@ +diff --git a/Makefile.system b/Makefile.system +index b89f60e..2dbdad0 100644 +--- a/Makefile.system ++++ b/Makefile.system +@@ -139,6 +139,10 @@ NO_PARALLEL_MAKE=0 + endif + GETARCH_FLAGS += -DNO_PARALLEL_MAKE=$(NO_PARALLEL_MAKE) + ++ifdef MAKE_NO_J ++GETARCH_FLAGS += -DMAKE_NO_J=$(MAKE_NO_J) ++endif ++ + ifdef MAKE_NB_JOBS + GETARCH_FLAGS += -DMAKE_NB_JOBS=$(MAKE_NB_JOBS) + endif +diff --git a/getarch.c b/getarch.c +index f9c49e6..dffad70 100644 +--- a/getarch.c ++++ b/getarch.c +@@ -1012,6 +1012,7 @@ int main(int argc, char *argv[]){ + #endif + #endif + ++#ifndef MAKE_NO_J + #ifdef MAKE_NB_JOBS + printf("MAKE += -j %d\n", MAKE_NB_JOBS); + #elif NO_PARALLEL_MAKE==1 +@@ -1021,6 +1022,7 @@ int main(int argc, char *argv[]){ + printf("MAKE += -j %d\n", get_num_cores()); + #endif + #endif ++#endif + + break; + diff --git a/var/spack/repos/builtin/packages/openblas/package.py b/var/spack/repos/builtin/packages/openblas/package.py index 4522130ccc..d147533491 100644 --- a/var/spack/repos/builtin/packages/openblas/package.py +++ b/var/spack/repos/builtin/packages/openblas/package.py @@ -1,30 +1,35 @@ from spack import * import sys import os +import shutil class Openblas(Package): """OpenBLAS: An optimized BLAS library""" homepage = "http://www.openblas.net" url = "http://github.com/xianyi/OpenBLAS/archive/v0.2.15.tar.gz" + version('0.2.18', '805e7f660877d588ea7e3792cda2ee65') version('0.2.17', '664a12807f2a2a7cda4781e3ab2ae0e1') version('0.2.16', 'fef46ab92463bdbb1479dcec594ef6dc') version('0.2.15', 'b1190f3d3471685f17cfd1ec1d252ac9') - variant('shared', default=True, description="Build shared libraries as well as static libs.") - variant('openmp', default=True, description="Enable OpenMP support.") + variant('shared', default=True, description="Build shared libraries as well as static libs.") + variant('openmp', default=False, description="Enable OpenMP support.") + variant('fpic', default=True, description="Build position independent code") # virtual dependency provides('blas') provides('lapack') + patch('make.patch') def install(self, spec, prefix): # Openblas is picky about compilers. Configure fails with # FC=/abs/path/to/f77, whereas FC=f77 works fine. # To circumvent this, provide basename only: make_defs = ['CC=%s' % os.path.basename(spack_cc), - 'FC=%s' % os.path.basename(spack_f77)] + 'FC=%s' % os.path.basename(spack_f77), + 'MAKE_NO_J=1'] make_targets = ['libs', 'netlib'] @@ -32,6 +37,8 @@ class Openblas(Package): if '+shared' in spec: make_targets += ['shared'] else: + if '+fpic' in spec: + make_defs.extend(['CFLAGS=-fPIC', 'FFLAGS=-fPIC']) make_defs += ['NO_SHARED=1'] # fix missing _dggsvd_ and _sggsvd_ @@ -39,8 +46,13 @@ class Openblas(Package): make_defs += ['BUILD_LAPACK_DEPRECATED=1'] # Add support for OpenMP - # Note: Make sure your compiler supports OpenMP if '+openmp' in spec: + # Note: Apple's most recent Clang 7.3.0 still does not support OpenMP. + # What is worse, Openblas (as of 0.2.18) hardcoded that OpenMP cannot + # be used with any (!) compiler named clang, bummer. + if spec.satisfies('%clang'): + raise InstallError('OpenBLAS does not support OpenMP with clang!') + make_defs += ['USE_OPENMP=1'] make_args = make_defs + make_targets @@ -64,6 +76,10 @@ class Openblas(Package): if '+shared' in spec: symlink('libopenblas.%s' % dso_suffix, 'liblapack.%s' % dso_suffix) + # Openblas may pass its own test but still fail to compile Lapack + # symbols. To make sure we get working Blas and Lapack, do a small test. + self.check_install(spec) + def setup_dependent_package(self, module, dspec): # This is WIP for a prototype interface for virtual packages. @@ -76,3 +92,44 @@ class Openblas(Package): if '+shared' in self.spec: self.spec.blas_shared_lib = join_path(libdir, 'libopenblas.%s' % dso_suffix) self.spec.lapack_shared_lib = self.spec.blas_shared_lib + + def check_install(self, spec): + # TODO: Pull this out to the framework function which recieves a pair of xyz.c and xyz.output + print "Checking Openblas installation..." + source_file = join_path(os.path.dirname(self.module.__file__), + 'test_cblas_dgemm.c') + output_file = join_path(os.path.dirname(self.module.__file__), + 'test_cblas_dgemm.output') + + with open(output_file, 'r') as f: + expected = f.read() + + cc = which('cc') + cc('-c', "-I%s" % join_path(spec.prefix, "include"), source_file) + link_flags = ["-L%s" % join_path(spec.prefix, "lib"), + "-llapack", + "-lblas", + "-lpthread" + ] + if '+openmp' in spec: + link_flags.extend([self.compiler.openmp_flag]) + cc('-o', "check", "test_cblas_dgemm.o", + *link_flags) + + try: + check = Executable('./check') + output = check(return_output=True) + except: + output = "" + success = output == expected + if not success: + print "Produced output does not match expected output." + print "Expected output:" + print '-'*80 + print expected + print '-'*80 + print "Produced output:" + print '-'*80 + print output + print '-'*80 + raise RuntimeError("Openblas install check failed") diff --git a/var/spack/repos/builtin/packages/openblas/test_cblas_dgemm.c b/var/spack/repos/builtin/packages/openblas/test_cblas_dgemm.c new file mode 100644 index 0000000000..3813a23b69 --- /dev/null +++ b/var/spack/repos/builtin/packages/openblas/test_cblas_dgemm.c @@ -0,0 +1,49 @@ +#include <cblas.h> +#include <stdio.h> + +double m[] = { + 3, 1, 3, + 1, 5, 9, + 2, 6, 5 +}; + +double x[] = { + -1, 3, -3 +}; + +#ifdef __cplusplus +extern "C" { +#endif + + void dgesv_(int *n, int *nrhs, double *a, int *lda, + int *ipivot, double *b, int *ldb, int *info); + +#ifdef __cplusplus +} +#endif + +int main(void) { + int i; + // blas: + double A[6] = {1.0, 2.0, 1.0, -3.0, 4.0, -1.0}; + double B[6] = {1.0, 2.0, 1.0, -3.0, 4.0, -1.0}; + double C[9] = {.5, .5, .5, .5, .5, .5, .5, .5, .5}; + cblas_dgemm(CblasColMajor, CblasNoTrans, CblasTrans, + 3, 3, 2, 1, A, 3, B, 3, 2, C, 3); + for (i = 0; i < 9; i++) + printf("%f\n", C[i]); + + // lapack: + int ipiv[3]; + int j; + int info; + int n = 1; + int nrhs = 1; + int lda = 3; + int ldb = 3; + dgesv_(&n,&nrhs, &m[0], &lda, ipiv, &x[0], &ldb, &info); + for (i=0; i<3; ++i) + printf("%5.1f %3d\n", x[i], ipiv[i]); + + return 0; +} diff --git a/var/spack/repos/builtin/packages/openblas/test_cblas_dgemm.output b/var/spack/repos/builtin/packages/openblas/test_cblas_dgemm.output new file mode 100644 index 0000000000..9c235e314f --- /dev/null +++ b/var/spack/repos/builtin/packages/openblas/test_cblas_dgemm.output @@ -0,0 +1,12 @@ +11.000000 +-9.000000 +5.000000 +-9.000000 +21.000000 +-1.000000 +5.000000 +-1.000000 +3.000000 + -0.3 1 + 3.0 1499101120 + -3.0 32767 diff --git a/var/spack/repos/builtin/packages/openmpi/package.py b/var/spack/repos/builtin/packages/openmpi/package.py index 9a127f1812..d0dd2d657f 100644 --- a/var/spack/repos/builtin/packages/openmpi/package.py +++ b/var/spack/repos/builtin/packages/openmpi/package.py @@ -1,7 +1,5 @@ -import os - from spack import * - +import os class Openmpi(Package): """Open MPI is a project combining technologies and resources from @@ -28,6 +26,7 @@ class Openmpi(Package): patch('configure.patch', when="@1.10.0:1.10.1") variant('psm', default=False, description='Build support for the PSM library.') + variant('pmi', default=True, description='Build support for PMI-based launchers') variant('verbs', default=False, description='Build support for OpenFabrics verbs.') # TODO : variant support for other schedulers is missing @@ -38,6 +37,7 @@ class Openmpi(Package): depends_on('hwloc') + def url_for_version(self, version): return "http://www.open-mpi.org/software/ompi/v%s/downloads/openmpi-%s.tar.bz2" % (version.up_to(2), version) @@ -48,6 +48,12 @@ class Openmpi(Package): spack_env.set('OMPI_FC', spack_fc) spack_env.set('OMPI_F77', spack_f77) + def setup_dependent_package(self, module, dep_spec): + self.spec.mpicc = join_path(self.prefix.bin, 'mpicc') + self.spec.mpicxx = join_path(self.prefix.bin, 'mpic++') + self.spec.mpifc = join_path(self.prefix.bin, 'mpif90') + self.spec.mpif77 = join_path(self.prefix.bin, 'mpif77') + def install(self, spec, prefix): config_args = ["--prefix=%s" % prefix, @@ -62,6 +68,9 @@ class Openmpi(Package): if '+psm' in spec: config_args.append("--with-psm") + if '+pmi' in spec: + config_args.append("--with-pmi") #TODO: let user specify directory when possible + if '+verbs' in spec: # Up through version 1.6, this option was previously named --with-openib if spec.satisfies('@:1.6'): diff --git a/var/spack/repos/builtin/packages/openspeedshop/package.py b/var/spack/repos/builtin/packages/openspeedshop/package.py index 8c71bcb7c3..bcd77351aa 100644 --- a/var/spack/repos/builtin/packages/openspeedshop/package.py +++ b/var/spack/repos/builtin/packages/openspeedshop/package.py @@ -1,5 +1,5 @@ ################################################################################ -# Copyright (c) 2015 Krell Institute. All Rights Reserved. +# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved. # # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software @@ -28,20 +28,15 @@ class Openspeedshop(Package): as open source code primarily under LGPL. """ - homepage = "http://www.openspeedshop.org" - url = "http://sourceforge.net/projects/openss/files/openss/openspeedshop-2.2/openspeedshop-2.2.tar.gz/download" + url = "https://github.com/OpenSpeedShop" version('2.2', '16cb051179c2038de4e8a845edf1d573') + # Use when the git repository is available + version('2.2', branch='master', git='https://github.com/OpenSpeedShop/openspeedshop.git') - #homepage = "http://www.openspeedshop.org" - #url = "http://sourceforge.net/projects/openss/files/openss/openspeedshop-2.1/openspeedshop-2.1.tar.gz/download" - #version('2.1', 'bdaa57c1a0db9d0c3e0303fd8496c507') - - # optional mirror template - #url = "file:/g/g24/jeg/openspeedshop-2.1.tar.gz" - #version('2.1', '64ee17166519838c7b94a1adc138e94f') - - + # Optional mirror template + #url = "file:/home/jeg/OpenSpeedShop_ROOT/SOURCES/openspeedshop-2.2.tar.gz" + #version('2.2', '643337740dc6c2faca60f42d3620b0e1') parallel = False @@ -51,11 +46,17 @@ class Openspeedshop(Package): variant('frontend', default=False, description="build only the front-end tool using the runtime_dir to point to the target build.") variant('cuda', default=False, description="build with cuda packages included.") variant('ptgf', default=False, description="build with the PTGF based gui package enabled.") - variant('intelmic', default=False, description="build for the Intel MIC platform.") - variant('cray', default=False, description="build for Cray platforms.") - variant('bluegene', default=False, description="build for Cray platforms.") variant('rtfe', default=False, description="build for generic cluster platforms that have different processors on the fe and be nodes.") + # MPI variants + variant('openmpi', default=False, description="Build mpi experiment collector for openmpi MPI when this variant is enabled.") + variant('mpt', default=False, description="Build mpi experiment collector for SGI MPT MPI when this variant is enabled.") + variant('mvapich2', default=False, description="Build mpi experiment collector for mvapich2 MPI when this variant is enabled.") + variant('mvapich', default=False, description="Build mpi experiment collector for mvapich MPI when this variant is enabled.") + variant('mpich2', default=False, description="Build mpi experiment collector for mpich2 MPI when this variant is enabled.") + variant('mpich', default=False, description="Build mpi experiment collector for mpich MPI when this variant is enabled.") + + depends_on("cmake@3.0.2") # Dependencies for openspeedshop that are common to all the variants of the OpenSpeedShop build depends_on("bison") depends_on("flex") @@ -63,8 +64,8 @@ class Openspeedshop(Package): depends_on("libelf") depends_on("libdwarf") depends_on("sqlite") - depends_on("boost@1.50.0") - depends_on("dyninst@8.2.1") + depends_on("boost@1.50.0:") + depends_on("dyninst@9.1.0") depends_on("python") depends_on("qt@3.3.8b+krellpatch") @@ -72,15 +73,78 @@ class Openspeedshop(Package): depends_on("libunwind", when='+offline') depends_on("papi", when='+offline') depends_on("libmonitor+krellpatch", when='+offline') - #depends_on("openmpi+krelloptions", when='+offline') - #depends_on("openmpi", when='+offline') - #depends_on("mpich", when='+offline') + depends_on("openmpi", when='+offline+openmpi') + depends_on("mpich", when='+offline+mpich') + depends_on("mpich2", when='+offline+mpich2') + depends_on("mvapich2", when='+offline+mvapich2') + depends_on("mvapich", when='+offline+mvapich') + depends_on("mpt", when='+offline+mpt') # Dependencies only for the openspeedshop cbtf package. depends_on("cbtf", when='+cbtf') depends_on("cbtf-krell", when='+cbtf') - depends_on("cbtf-argonavis", when='+cbtf') - depends_on("mrnet@4.1.0:+lwthreads", when='+cbtf') + depends_on("cbtf-argonavis", when='+cbtf+cuda') + depends_on("mrnet@5.0.1:+lwthreads+krellpatch", when='+cbtf') + + def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions): + # Sets build type parameters into cmakeOptions the options that will enable the cbtf-krell built type settings + + compile_flags="-O2 -g" + BuildTypeOptions = [] + # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the stdcmakeargs + for word in cmakeOptions[:]: + if word.startswith('-DCMAKE_BUILD_TYPE'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_CXX_FLAGS'): + cmakeOptions.remove(word) + if word.startswith('-DCMAKE_C_FLAGS'): + cmakeOptions.remove(word) + BuildTypeOptions.extend([ + '-DCMAKE_BUILD_TYPE=None', + '-DCMAKE_CXX_FLAGS=%s' % compile_flags, + '-DCMAKE_C_FLAGS=%s' % compile_flags + ]) + + cmakeOptions.extend(BuildTypeOptions) + + def set_mpi_cmakeOptions(self, spec, cmakeOptions): + # Appends to cmakeOptions the options that will enable the appropriate MPI implementations + + MPIOptions = [] + + # openmpi + if '+openmpi' in spec: + MPIOptions.extend([ + '-DOPENMPI_DIR=%s' % spec['openmpi'].prefix + ]) + # mpich + if '+mpich' in spec: + MPIOptions.extend([ + '-DMPICH_DIR=%s' % spec['mpich'].prefix + ]) + # mpich2 + if '+mpich2' in spec: + MPIOptions.extend([ + '-DMPICH2_DIR=%s' % spec['mpich2'].prefix + ]) + # mvapich + if '+mvapich' in spec: + MPIOptions.extend([ + '-DMVAPICH_DIR=%s' % spec['mvapich'].prefix + ]) + # mvapich2 + if '+mvapich2' in spec: + MPIOptions.extend([ + '-DMVAPICH2_DIR=%s' % spec['mvapich2'].prefix + ]) + # mpt + if '+mpt' in spec: + MPIOptions.extend([ + '-DMPT_DIR=%s' % spec['mpt'].prefix + ]) + + cmakeOptions.extend(MPIOptions) + def install(self, spec, prefix): @@ -100,51 +164,118 @@ class Openspeedshop(Package): instrumentor_setting = "offline" if '+runtime' in spec: with working_dir('build_runtime', create=True): - cmake('..', - '-DCMAKE_INSTALL_PREFIX=%s' % prefix, - '-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, - '-DINSTRUMENTOR=%s' % instrumentor_setting, - '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, - '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, - '-DPAPI_DIR=%s' % spec['papi'].prefix, - *std_cmake_args) + + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, + '-DINSTRUMENTOR=%s' % instrumentor_setting, + '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, + '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, + '-DPAPI_DIR=%s' % spec['papi'].prefix + ]) + + # Add any MPI implementations coming from variant settings + self.set_mpi_cmakeOptions(spec, cmakeOptions) + cmakeOptions.extend(std_cmake_args) + + # Adjust the build options to the favored ones for this build + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + cmake('..', *cmakeOptions) + make("clean") make() make("install") else: cmake_prefix_path = join_path(spec['dyninst'].prefix) with working_dir('build', create=True): + #python_vers=join_path(spec['python'].version[:2]) #'-DOPENMPI_DIR=%s' % openmpi_prefix_path, #'-DMVAPICH_DIR=%s' % mvapich_prefix_path, + #'-DMPICH_DIR=%s' % spec['mpich'].prefix, + #'-DMPICH2_DIR=%s' % spec['mpich2'].prefix, + #'-DBoost_NO_SYSTEM_PATHS=TRUE', + #'-DBOOST_ROOT=%s' % spec['boost'].prefix, + #'-DOPENMPI_DIR=%s' % spec['openmpi'].prefix, + python_vers='%d.%d' % spec['python'].version[:2] - cmake('..', - '-DCMAKE_INSTALL_PREFIX=%s' % prefix, - '-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, - '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, - '-DINSTRUMENTOR=%s' % instrumentor_setting, - '-DBINUTILS_DIR=%s' % spec['binutils'].prefix, - '-DLIBELF_DIR=%s' % spec['libelf'].prefix, - '-DLIBDWARF_DIR=%s' % spec['libdwarf'].prefix, - '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, - '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, - '-DPAPI_DIR=%s' % spec['papi'].prefix, - '-DSQLITE3_DIR=%s' % spec['sqlite'].prefix, - '-DQTLIB_DIR=%s' % spec['qt'].prefix, - '-DPYTHON_EXECUTABLE=%s' % join_path(spec['python'].prefix + '/bin/python'), - '-DPYTHON_INCLUDE_DIR=%s' % join_path(spec['python'].prefix.include) + '/python' + python_vers, - '-DPYTHON_LIBRARY=%s' % join_path(spec['python'].prefix.lib) + '/libpython' + python_vers + '.so', - '-DBoost_NO_SYSTEM_PATHS=TRUE', - '-DBOOST_ROOT=%s' % spec['boost'].prefix, - '-DDYNINST_DIR=%s' % spec['dyninst'].prefix, - *std_cmake_args) + + cmakeOptions = [] + cmakeOptions.extend(['-DCMAKE_INSTALL_PREFIX=%s' % prefix, + '-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, + '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, + '-DINSTRUMENTOR=%s' % instrumentor_setting, + '-DBINUTILS_DIR=%s' % spec['binutils'].prefix, + '-DLIBELF_DIR=%s' % spec['libelf'].prefix, + '-DLIBDWARF_DIR=%s' % spec['libdwarf'].prefix, + '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix, + '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, + '-DPAPI_DIR=%s' % spec['papi'].prefix, + '-DSQLITE3_DIR=%s' % spec['sqlite'].prefix, + '-DQTLIB_DIR=%s' % spec['qt'].prefix, + '-DPYTHON_EXECUTABLE=%s' % join_path(spec['python'].prefix + '/bin/python'), + '-DPYTHON_INCLUDE_DIR=%s' % join_path(spec['python'].prefix.include) + '/python' + python_vers, + '-DPYTHON_LIBRARY=%s' % join_path(spec['python'].prefix.lib) + '/libpython' + python_vers + '.so', + '-DBoost_NO_SYSTEM_PATHS=TRUE', + '-DBOOST_ROOT=%s' % spec['boost'].prefix, + '-DDYNINST_DIR=%s' % spec['dyninst'].prefix + ]) + + # Add any MPI implementations coming from variant settings + self.set_mpi_cmakeOptions(spec, cmakeOptions) + cmakeOptions.extend(std_cmake_args) + + # Adjust the build options to the favored ones for this build + self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions) + + cmake('..', *cmakeOptions) + make("clean") make() make("install") elif '+cbtf' in spec: instrumentor_setting = "cbtf" + resolve_symbols = "symtabapi" cmake_prefix_path = join_path(spec['cbtf'].prefix) + ':' + join_path(spec['cbtf-krell'].prefix) + ':' + join_path(spec['dyninst'].prefix) + #runtime_platform_cray = "cray" + #if '+cray' in spec: + # if '+runtime' in spec: + # #-DCBTF_KRELL_CN_RUNTIME_DIR=${CBTF_KRELL_CN_INSTALL_DIR} \ + # with working_dir('build_cbtf_cray_runtime', create=True): + # python_vers='%d.%d' % spec['python'].version[:2] + # cmake('..', + # '-DCMAKE_INSTALL_PREFIX=%s' % prefix, + # '-DCMAKE_LIBRARY_PATH=%s' % prefix.lib64, + # '-DRUNTIME_PLATFORM=%s' % runtime_platform_cray, + # '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path, + # '-DRESOLVE_SYMBOLS=%s' % resolve_symbols, + # '-DINSTRUMENTOR=%s' % instrumentor_setting, + # '-DCBTF_DIR=%s' % spec['cbtf'].prefix, + # '-DCBTF_KRELL_DIR=%s' % spec['cbtf-krell'].prefix, + # '-DCBTF_KRELL_CN_RUNTIME_DIR=%s' % spec['cbtf-krell'].prefix, + # '-DBINUTILS_DIR=%s' % spec['binutils'].prefix, + # '-DLIBELF_DIR=%s' % spec['libelf'].prefix, + # '-DLIBDWARF_DIR=%s' % spec['libdwarf'].prefix, + # '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix, + # '-DPAPI_DIR=%s' % spec['papi'].prefix, + # '-DDYNINST_DIR=%s' % spec['dyninst'].prefix, + # '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix, + # '-DMRNET_DIR=%s' % spec['mrnet'].prefix, + # '-DBoost_NO_SYSTEM_PATHS=TRUE', + # '-DBOOST_ROOT=%s' % spec['boost'].prefix, + # *std_cmake_args) + + # make("clean") + # make() + # make("install") + + + #elif '+mic' in spec: + # comment out else and shift over the default case below until arch detection is in + #else: + if '+runtime' in spec: with working_dir('build_cbtf_runtime', create=True): python_vers='%d.%d' % spec['python'].version[:2] @@ -203,14 +334,63 @@ class Openspeedshop(Package): # tbd - #if '+intelmic' in spec: - # with working_dir('build_intelmic_compute', create=True): - # tbd - # with working_dir('build_intelmic_frontend', create=True): - # tbd - #if '+cray' in spec: - # with working_dir('build_cray_compute', create=True): - # tbd - # with working_dir('build_cray_frontend', create=True): - # tbd + #if '+cbtf' in spec: + # if cray build type detected: + # if '+runtime' in spec: + # with working_dir('build_cray_cbtf_compute', create=True): + # tbd + # else: + # with working_dir('build_cray_cbtf_frontend', create=True): + # tbd + # with working_dir('build_cray_osscbtf_frontend', create=True): + # tbd + # fi + # elif '+intelmic' in spec: + # if '+runtime' in spec: + # with working_dir('build_intelmic_cbtf_compute', create=True): + # tbd + # else: + # with working_dir('build_intelmic_cbtf_frontend', create=True): + # tbd + # with working_dir('build_intelmic_osscbtf_frontend', create=True): + # fi + # else + # with working_dir('build_cluster_cbtf', create=True): + # tbd + # with working_dir('build_cluster osscbtf', create=True): + # tbd + # fi + #elif '+offline' in spec: + # if cray build type detected: + # if '+runtime' in spec: + # with working_dir('build_cray_ossoff_compute', create=True): + # tbd + # else: + # with working_dir('build_cray_ossoff_frontend', create=True): + # tbd + # fi + # elif '+intelmic' in spec: + # if '+runtime' in spec: + # with working_dir('build_intelmic_ossoff_compute', create=True): + # tbd + # else: + # with working_dir('build_intelmic_ossoff_frontend', create=True): + # tbd + # fi + # elif bgq build type detected: + # if '+runtime' in spec: + # with working_dir('build_bgq_ossoff_compute', create=True): + # tbd + # else: + # with working_dir('build_bgq_ossoff_frontend', create=True): + # tbd + # fi + # else + # with working_dir('build_cluster ossoff', create=True): + # tbd + # fi + #fi + + + diff --git a/var/spack/repos/builtin/packages/openssl/package.py b/var/spack/repos/builtin/packages/openssl/package.py index 70afaf4038..d0c95731a2 100644 --- a/var/spack/repos/builtin/packages/openssl/package.py +++ b/var/spack/repos/builtin/packages/openssl/package.py @@ -3,6 +3,7 @@ import llnl.util.tty as tty from spack import * + class Openssl(Package): """The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source @@ -14,10 +15,12 @@ class Openssl(Package): version('1.0.1h', '8d6d684a9430d5cc98a62a5d8fbda8cf') version('1.0.1r', '1abd905e079542ccae948af37e393d28') + version('1.0.1t', '9837746fcf8a6727d46d22ca35953da1') version('1.0.2d', '38dd619b2e77cbac69b99f52a053d25a') version('1.0.2e', '5262bfa25b60ed9de9f28d5d52d77fc5') version('1.0.2f', 'b3bf73f507172be9292ea2a8c28b659d') version('1.0.2g', 'f3c710c045cdee5fd114feb69feba7aa') + version('1.0.2h', '9392e65072ce4b614c1392eefc1f23d0') depends_on("zlib") parallel = False @@ -30,26 +33,14 @@ class Openssl(Package): # Same idea, but just to avoid issuing the same message multiple times warnings_given_to_user = getattr(Openssl, '_warnings_given', {}) if openssl_url is None: - latest = 'http://www.openssl.org/source/openssl-{version}.tar.gz' - older = 'http://www.openssl.org/source/old/{version_number}/openssl-{version_full}.tar.gz' - # Try to use the url where the latest tarballs are stored. If the url does not exist (404), then - # return the url for older format - version_number = '.'.join([str(x) for x in version[:-1]]) - older_url = older.format(version_number=version_number, version_full=version) - latest_url = latest.format(version=version) - response = urllib.urlopen(latest.format(version=version)) - if response.getcode() == 404: - openssl_url = older_url - # Checks if we already warned the user for this particular version of OpenSSL. - # If not we display a warning message and mark this version + if self.spec.satisfies('@external'): + # The version @external is reserved to system openssl. In that case return a fake url and exit + openssl_url = '@external (reserved version for system openssl)' if not warnings_given_to_user.get(version, False): - tty.warn('This installation depends on an old version of OpenSSL, which may have known security issues. ') - tty.warn('Consider updating to the latest version of this package.') - tty.warn('More details at {homepage}'.format(homepage=Openssl.homepage)) + tty.msg('Using openssl@external : the version @external is reserved for system openssl') warnings_given_to_user[version] = True else: - openssl_url = latest_url - # Store the computed URL + openssl_url = self.check_for_outdated_release(version, warnings_given_to_user) # Store the computed URL openssl_urls[version] = openssl_url # Store the updated dictionary of URLS Openssl._openssl_url = openssl_urls @@ -58,6 +49,28 @@ class Openssl(Package): return openssl_url + def check_for_outdated_release(self, version, warnings_given_to_user): + latest = 'ftp://ftp.openssl.org/source/openssl-{version}.tar.gz' + older = 'http://www.openssl.org/source/old/{version_number}/openssl-{version_full}.tar.gz' + # Try to use the url where the latest tarballs are stored. If the url does not exist (404), then + # return the url for older format + version_number = '.'.join([str(x) for x in version[:-1]]) + try: + openssl_url = latest.format(version=version) + urllib.urlopen(openssl_url) + except IOError: + openssl_url = older.format(version_number=version_number, version_full=version) + # Checks if we already warned the user for this particular version of OpenSSL. + # If not we display a warning message and mark this version + if not warnings_given_to_user.get(version, False): + tty.warn( + 'This installation depends on an old version of OpenSSL, which may have known security issues. ') + tty.warn('Consider updating to the latest version of this package.') + tty.warn('More details at {homepage}'.format(homepage=Openssl.homepage)) + warnings_given_to_user[version] = True + + return openssl_url + def install(self, spec, prefix): # OpenSSL uses a variable APPS in its Makefile. If it happens to be set # in the environment, then this will override what is set in the diff --git a/var/spack/repos/builtin/packages/osu-micro-benchmarks/package.py b/var/spack/repos/builtin/packages/osu-micro-benchmarks/package.py new file mode 100644 index 0000000000..01054471a3 --- /dev/null +++ b/var/spack/repos/builtin/packages/osu-micro-benchmarks/package.py @@ -0,0 +1,38 @@ +from spack import * + +class OsuMicroBenchmarks(Package): + """The Ohio MicroBenchmark suite is a collection of independent MPI + message passing performance microbenchmarks developed and written at + The Ohio State University. It includes traditional benchmarks and + performance measures such as latency, bandwidth and host overhead + and can be used for both traditional and GPU-enhanced nodes.""" + + homepage = "http://mvapich.cse.ohio-state.edu/benchmarks/" + url = "http://mvapich.cse.ohio-state.edu/download/mvapich/osu-micro-benchmarks-5.3.tar.gz" + + version('5.3', '42e22b931d451e8bec31a7424e4adfc2') + + variant('cuda', default=False, description="Enable CUDA support") + + depends_on('mpi') + depends_on('cuda', when='+cuda') + + + def install(self, spec, prefix): + config_args = [ + 'CC=%s' % spec['mpi'].prefix.bin + '/mpicc', + 'CXX=%s' % spec['mpi'].prefix.bin + '/mpicxx', + 'LDFLAGS=-lrt', + '--prefix=%s' % prefix + ] + + if '+cuda' in spec: + config_args.extend([ + '--enable-cuda', + '--with-cuda=%s' % spec['cuda'].prefix, + ]) + + configure(*config_args) + + make() + make('install') diff --git a/var/spack/repos/builtin/packages/p4est/package.py b/var/spack/repos/builtin/packages/p4est/package.py index 1e2969fe64..adf75babb9 100644 --- a/var/spack/repos/builtin/packages/p4est/package.py +++ b/var/spack/repos/builtin/packages/p4est/package.py @@ -7,10 +7,17 @@ class P4est(Package): version('1.1', '37ba7f4410958cfb38a2140339dbf64f') - # disable by default to make it work on frontend of clusters - variant('tests', default=False, description='Run small tests') + variant('tests', default=True, description='Run small tests') + # build dependencies + depends_on('automake') + depends_on('autoconf') + depends_on('libtool@2.4.2:') + + # other dependencies + depends_on('lua') # Needed for the submodule sc depends_on('mpi') + depends_on('zlib') def install(self, spec, prefix): options = ['--enable-mpi', @@ -19,16 +26,20 @@ class P4est(Package): '--without-blas', 'CPPFLAGS=-DSC_LOG_PRIORITY=SC_LP_ESSENTIAL', 'CFLAGS=-O2', - 'CC=%s' % join_path(self.spec['mpi'].prefix.bin, 'mpicc'), # TODO: use ENV variables or MPI class wrappers - 'CXX=%s' % join_path(self.spec['mpi'].prefix.bin, 'mpic++'), - 'FC=%s' % join_path(self.spec['mpi'].prefix.bin, 'mpif90'), - 'F77=%s' % join_path(self.spec['mpi'].prefix.bin, 'mpif77'), + 'CC=%s' % self.spec['mpi'].mpicc, + 'CXX=%s' % self.spec['mpi'].mpicxx, + 'FC=%s' % self.spec['mpi'].mpifc, + 'F77=%s' % self.spec['mpi'].mpif77 ] configure('--prefix=%s' % prefix, *options) make() + # Make tests optional as sometimes mpiexec can't be run with an error: + # mpiexec has detected an attempt to run as root. + # Running at root is *strongly* discouraged as any mistake (e.g., in + # defining TMPDIR) or bug can result in catastrophic damage to the OS + # file system, leaving your system in an unusable state. if '+tests' in self.spec: - make("check") - + make("check") make("install") diff --git a/var/spack/repos/builtin/packages/papi/package.py b/var/spack/repos/builtin/packages/papi/package.py index 53d69e28d9..74b3ea9ef9 100644 --- a/var/spack/repos/builtin/packages/papi/package.py +++ b/var/spack/repos/builtin/packages/papi/package.py @@ -1,5 +1,8 @@ from spack import * +import glob import os +import sys +from llnl.util.filesystem import fix_darwin_install_name class Papi(Package): """PAPI provides the tool designer and application engineer with a @@ -18,17 +21,27 @@ class Papi(Package): version('5.3.0', '367961dd0ab426e5ae367c2713924ffb') def install(self, spec, prefix): - os.chdir("src/") + with working_dir("src"): - configure_args=["--prefix=%s" % prefix] + configure_args=["--prefix=%s" % prefix] - # PAPI uses MPI if MPI is present; since we don't require an - # MPI package, we ensure that all attempts to use MPI fail, so - # that PAPI does not get confused - configure_args.append('MPICC=:') + # PAPI uses MPI if MPI is present; since we don't require + # an MPI package, we ensure that all attempts to use MPI + # fail, so that PAPI does not get confused + configure_args.append('MPICC=:') - configure(*configure_args) + configure(*configure_args) - make() - make("install") + # Don't use <malloc.h> + for level in [".", "*", "*/*"]: + files = glob.iglob(join_path(level, "*.[ch]")) + filter_file(r"\<malloc\.h\>", "<stdlib.h>", *files) + make() + make("install") + + # The shared library is not installed correctly on Darwin + if sys.platform == 'darwin': + os.rename(join_path(prefix.lib, 'libpapi.so'), + join_path(prefix.lib, 'libpapi.dylib')) + fix_darwin_install_name(prefix.lib) diff --git a/var/spack/repos/builtin/packages/paradiseo/enable_eoserial.patch b/var/spack/repos/builtin/packages/paradiseo/enable_eoserial.patch new file mode 100644 index 0000000000..8b3ccfeb84 --- /dev/null +++ b/var/spack/repos/builtin/packages/paradiseo/enable_eoserial.patch @@ -0,0 +1,14 @@ +diff --git a/eo/src/CMakeLists.txt b/eo/src/CMakeLists.txt +index b2b445a..d45ddc7 100644 +--- a/eo/src/CMakeLists.txt ++++ b/eo/src/CMakeLists.txt +@@ -47,7 +47,7 @@ install(DIRECTORY do es ga gp other utils + add_subdirectory(es) + add_subdirectory(ga) + add_subdirectory(utils) +-#add_subdirectory(serial) ++add_subdirectory(serial) # Required when including <paradiseo/eo/utils/eoTimer.h> , which is need by <paradiseo/eo/mpi/eoMpi.h> + + if(ENABLE_PYEO) + add_subdirectory(pyeo) +
\ No newline at end of file diff --git a/var/spack/repos/builtin/packages/paradiseo/fix_osx_detection.patch b/var/spack/repos/builtin/packages/paradiseo/fix_osx_detection.patch new file mode 100644 index 0000000000..27b240f673 --- /dev/null +++ b/var/spack/repos/builtin/packages/paradiseo/fix_osx_detection.patch @@ -0,0 +1,13 @@ +diff --git a/cmake/Config.cmake b/cmake/Config.cmake +index 02593ba..d198ca9 100644 +--- a/cmake/Config.cmake ++++ b/cmake/Config.cmake +@@ -6,7 +6,7 @@ if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin") + + # detect OS X version. (use '/usr/bin/sw_vers -productVersion' to extract V from '10.V.x'.) + execute_process (COMMAND /usr/bin/sw_vers -productVersion OUTPUT_VARIABLE MACOSX_VERSION_RAW) +- string(REGEX REPLACE "10\\.([0-9]).*" "\\1" MACOSX_VERSION "${MACOSX_VERSION_RAW}") ++ string(REGEX REPLACE "10\\.([0-9]+).*" "\\1" MACOSX_VERSION "${MACOSX_VERSION_RAW}") + if(${MACOSX_VERSION} LESS 5) + message(FATAL_ERROR "Unsupported version of OS X : ${MACOSX_VERSION_RAW}") + return() diff --git a/var/spack/repos/builtin/packages/paradiseo/fix_tests.patch b/var/spack/repos/builtin/packages/paradiseo/fix_tests.patch new file mode 100644 index 0000000000..607c5d5262 --- /dev/null +++ b/var/spack/repos/builtin/packages/paradiseo/fix_tests.patch @@ -0,0 +1,13 @@ +diff --git a/moeo/test/t-moeo2DMinHypervolumeArchive.cpp b/moeo/test/t-moeo2DMinHypervolumeArchive.cpp +index 994a9a4..c4ba77b 100644 +--- a/moeo/test/t-moeo2DMinHypervolumeArchive.cpp ++++ b/moeo/test/t-moeo2DMinHypervolumeArchive.cpp +@@ -41,7 +41,7 @@ + #include <moeo> + #include <cassert> + +-#include<archive/moeo2DMinHyperVolumeArchive.h> ++#include<archive/moeo2DMinHypervolumeArchive.h> + + //----------------------------------------------------------------------------- + diff --git a/var/spack/repos/builtin/packages/paradiseo/fix_tutorials.patch b/var/spack/repos/builtin/packages/paradiseo/fix_tutorials.patch new file mode 100644 index 0000000000..14cb5fed74 --- /dev/null +++ b/var/spack/repos/builtin/packages/paradiseo/fix_tutorials.patch @@ -0,0 +1,13 @@ +diff --git a/eo/tutorial/Lesson3/exercise3.1.cpp b/eo/tutorial/Lesson3/exercise3.1.cpp +index dc37479..d178941 100644 +--- a/eo/tutorial/Lesson3/exercise3.1.cpp ++++ b/eo/tutorial/Lesson3/exercise3.1.cpp +@@ -289,7 +289,7 @@ void main_function(int argc, char **argv) + checkpoint.add(fdcStat); + + // The Stdout monitor will print parameters to the screen ... +- eoStdoutMonitor monitor(false); ++ eoStdoutMonitor monitor; + + // when called by the checkpoint (i.e. at every generation) + checkpoint.add(monitor); diff --git a/var/spack/repos/builtin/packages/paradiseo/package.py b/var/spack/repos/builtin/packages/paradiseo/package.py new file mode 100644 index 0000000000..34766099da --- /dev/null +++ b/var/spack/repos/builtin/packages/paradiseo/package.py @@ -0,0 +1,66 @@ +from spack import * +import sys + +class Paradiseo(Package): + """A C++ white-box object-oriented framework dedicated to the reusable design of metaheuristics.""" + homepage = "http://paradiseo.gforge.inria.fr/" + + # Installing from the development version is a better option at this + # point than using the very old supplied packages + version('head', git='https://gforge.inria.fr/git/paradiseo/paradiseo.git') + # This is a version that the package formula author has tested successfully. + # However, the clone is very large (~1Gb git history). The history in the + # head version has been trimmed significantly. + version('dev-safe', git='https://gforge.inria.fr/git/paradiseo/paradiseo.git', + commit='dbb8fbe9a786efd4d1c26408ac1883442e7643a6') + + variant('mpi', default=True, description='Compile with parallel and distributed metaheuristics module') + variant('smp', default=True, description='Compile with symmetric multi-processing module ') + variant('edo', default=True, description='Compile with (Experimental) EDO module') + #variant('tests', default=False, description='Compile with build tests') + #variant('doc', default=False, description='Compile with documentation') + variant('debug', default=False, description='Builds a debug version of the libraries') + variant('openmp', default=False, description='Enable OpenMP support') + variant('gnuplot', default=False, description='Enable GnuPlot support') + + # Required dependencies + depends_on ("cmake") + + # Optional dependencies + depends_on ("mpi", when="+mpi") + depends_on ("doxygen", when='+doc') + depends_on ("gnuplot", when='+gnuplot') + depends_on ("eigen", when='+edo') + depends_on ("boost~mpi", when='+edo~mpi') + depends_on ("boost+mpi", when='+edo+mpi') + + # Patches + patch('enable_eoserial.patch') + patch('fix_osx_detection.patch') + patch('fix_tests.patch') + patch('fix_tutorials.patch') + + def install(self, spec, prefix): + options = [] + options.extend(std_cmake_args) + + options.extend([ + '-DCMAKE_BUILD_TYPE:STRING=%s' % ('Debug' if '+debug' in spec else 'Release'), + '-DINSTALL_TYPE:STRING=MIN', + '-DMPI:BOOL=%s' % ('TRUE' if '+mpi' in spec else 'FALSE'), + '-DSMP:BOOL=%s' % ('TRUE' if '+smp' in spec else 'FALSE'), # Note: This requires a C++11 compatible compiler + '-DEDO:BOOL=%s' % ('TRUE' if '+edo' in spec else 'FALSE'), + '-DENABLE_CMAKE_TESTING:BOOL=%s' % ('TRUE' if '+tests' in spec else 'FALSE'), + '-DENABLE_OPENMP:BOOL=%s' % ('TRUE' if '+openmp' in spec else 'FALSE'), + '-DENABLE_GNUPLOT:BOOL=%s' % ('TRUE' if '+gnuplot' in spec else 'FALSE') + ]) + + with working_dir('spack-build', create=True): + # Configure + cmake('..', *options) + + # Build, test and install + make("VERBOSE=1") + if '+tests' in spec: + make("test") + make("install") diff --git a/var/spack/repos/builtin/packages/py-SQLAlchemy/package.py b/var/spack/repos/builtin/packages/py-SQLAlchemy/package.py new file mode 100644 index 0000000000..9aecc95c63 --- /dev/null +++ b/var/spack/repos/builtin/packages/py-SQLAlchemy/package.py @@ -0,0 +1,14 @@ +from spack import * + +class PySqlalchemy(Package): + """The Python SQL Toolkit and Object Relational Mapper""" + + homepage = 'http://www.sqlalchemy.org/' + url = "https://pypi.python.org/packages/source/S/SQLAlchemy/SQLAlchemy-1.0.12.tar.gz" + + version('1.0.12', '6d19ef29883bbebdcac6613cf391cac4') + + extends('python') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/py-argcomplete/package.py b/var/spack/repos/builtin/packages/py-argcomplete/package.py new file mode 100644 index 0000000000..c94ef7238b --- /dev/null +++ b/var/spack/repos/builtin/packages/py-argcomplete/package.py @@ -0,0 +1,14 @@ +from spack import * + +class PyArgcomplete(Package): + """Bash tab completion for argparse.""" + + homepage = "https://pypi.python.org/pypi/argcomplete" + url = "https://pypi.python.org/packages/source/a/argcomplete/argcomplete-1.1.1.tar.gz" + + version('1.1.1', '89a3839096c9f991ad33828e72d21abf') + + extends('python') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/py-bottleneck/package.py b/var/spack/repos/builtin/packages/py-bottleneck/package.py index 0aa4208b4d..d43308543b 100644 --- a/var/spack/repos/builtin/packages/py-bottleneck/package.py +++ b/var/spack/repos/builtin/packages/py-bottleneck/package.py @@ -7,7 +7,7 @@ class PyBottleneck(Package): version('1.0.0', '380fa6f275bd24f27e7cf0e0d752f5d2') - extends('python', ignore=r'bin/f2py$') + extends('python') depends_on('py-numpy') def install(self, spec, prefix): diff --git a/var/spack/repos/builtin/packages/py-csvkit/package.py b/var/spack/repos/builtin/packages/py-csvkit/package.py new file mode 100644 index 0000000000..def30457be --- /dev/null +++ b/var/spack/repos/builtin/packages/py-csvkit/package.py @@ -0,0 +1,22 @@ +from spack import * + +class PyCsvkit(Package): + """A library of utilities for working with CSV, the king of tabular file + formats""" + + homepage = 'http://csvkit.rtfd.org/' + url = "https://pypi.python.org/packages/source/c/csvkit/csvkit-0.9.1.tar.gz" + + version('0.9.1', '48d78920019d18846933ee969502fff6') + + extends('python') + + depends_on('py-dateutil') + depends_on('py-dbf') + depends_on('py-xlrd') + depends_on('py-SQLAlchemy') + depends_on('py-six') + depends_on('py-openpyxl') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/py-dbf/package.py b/var/spack/repos/builtin/packages/py-dbf/package.py new file mode 100644 index 0000000000..698b221903 --- /dev/null +++ b/var/spack/repos/builtin/packages/py-dbf/package.py @@ -0,0 +1,15 @@ +from spack import * + +class PyDbf(Package): + """Pure python package for reading/writing dBase, FoxPro, and Visual FoxPro + .dbf files (including memos)""" + + homepage = 'https://pypi.python.org/pypi/dbf' + url = "https://pypi.python.org/packages/source/d/dbf/dbf-0.96.005.tar.gz" + + version('0.96.005', 'bce1a1ed8b454a30606e7e18dd2f8277') + + extends('python') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/py-jdcal/package.py b/var/spack/repos/builtin/packages/py-jdcal/package.py new file mode 100644 index 0000000000..54169b2c21 --- /dev/null +++ b/var/spack/repos/builtin/packages/py-jdcal/package.py @@ -0,0 +1,14 @@ +from spack import * + +class PyJdcal(Package): + """Julian dates from proleptic Gregorian and Julian calendars""" + + homepage = 'http://github.com/phn/jdcal' + url = "https://pypi.python.org/packages/source/j/jdcal/jdcal-1.2.tar.gz" + + version('1.2', 'ab8d5ba300fd1eb01514f363d19b1eb9') + + extends('python') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/py-matplotlib/package.py b/var/spack/repos/builtin/packages/py-matplotlib/package.py index 19194c942e..1a190cc5f3 100644 --- a/var/spack/repos/builtin/packages/py-matplotlib/package.py +++ b/var/spack/repos/builtin/packages/py-matplotlib/package.py @@ -12,7 +12,7 @@ class PyMatplotlib(Package): variant('gui', default=False, description='Enable GUI') variant('ipython', default=False, description='Enable ipython support') - extends('python', ignore=r'bin/nosetests.*$|bin/pbr$|bin/f2py$') + extends('python', ignore=r'bin/nosetests.*$|bin/pbr$') depends_on('py-pyside', when='+gui') depends_on('py-ipython', when='+ipython') diff --git a/var/spack/repos/builtin/packages/py-numexpr/package.py b/var/spack/repos/builtin/packages/py-numexpr/package.py index 081a79dec6..0076aa456b 100644 --- a/var/spack/repos/builtin/packages/py-numexpr/package.py +++ b/var/spack/repos/builtin/packages/py-numexpr/package.py @@ -9,7 +9,7 @@ class PyNumexpr(Package): version('2.4.6', '17ac6fafc9ea1ce3eb970b9abccb4fbd') version('2.5', '84f66cced45ba3e30dcf77a937763aaa') - extends('python', ignore=r'bin/f2py$') + extends('python') depends_on('py-numpy') def install(self, spec, prefix): diff --git a/var/spack/repos/builtin/packages/py-openpyxl/package.py b/var/spack/repos/builtin/packages/py-openpyxl/package.py new file mode 100644 index 0000000000..87ff9f3521 --- /dev/null +++ b/var/spack/repos/builtin/packages/py-openpyxl/package.py @@ -0,0 +1,17 @@ +from spack import * + +class PyOpenpyxl(Package): + """A Python library to read/write Excel 2007 xlsx/xlsm files""" + + homepage = 'http://openpyxl.readthedocs.org/' + url = "https://pypi.python.org/packages/source/o/openpyxl/openpyxl-2.4.0-a1.tar.gz" + + version('2.4.0-a1', 'e5ca6d23ceccb15115d45cdf26e736fc') + + extends('python') + + depends_on('py-jdcal') + depends_on('py-setuptools') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/py-pandas/package.py b/var/spack/repos/builtin/packages/py-pandas/package.py index 2320b1f92f..59d515eb5e 100644 --- a/var/spack/repos/builtin/packages/py-pandas/package.py +++ b/var/spack/repos/builtin/packages/py-pandas/package.py @@ -10,7 +10,7 @@ class PyPandas(Package): version('0.16.1', 'fac4f25748f9610a3e00e765474bdea8') version('0.18.0', 'f143762cd7a59815e348adf4308d2cf6') - extends('python', ignore=r'bin/f2py$') + extends('python') depends_on('py-dateutil') depends_on('py-numpy') depends_on('py-setuptools') diff --git a/var/spack/repos/builtin/packages/py-scikit-image/package.py b/var/spack/repos/builtin/packages/py-scikit-image/package.py index 22ce1f8374..d13339060e 100644 --- a/var/spack/repos/builtin/packages/py-scikit-image/package.py +++ b/var/spack/repos/builtin/packages/py-scikit-image/package.py @@ -7,7 +7,7 @@ class PyScikitImage(Package): version('0.12.3', '04ea833383e0b6ad5f65da21292c25e1') - extends('python', ignore=r'bin/.*\.py$|bin/f2py$') + extends('python', ignore=r'bin/.*\.py$') depends_on('py-dask') depends_on('py-pillow') diff --git a/var/spack/repos/builtin/packages/py-xlrd/package.py b/var/spack/repos/builtin/packages/py-xlrd/package.py new file mode 100644 index 0000000000..8f25c06aad --- /dev/null +++ b/var/spack/repos/builtin/packages/py-xlrd/package.py @@ -0,0 +1,15 @@ +from spack import * + +class PyXlrd(Package): + """Library for developers to extract data from Microsoft Excel (tm) + spreadsheet files""" + + homepage = 'http://www.python-excel.org/' + url = "https://pypi.python.org/packages/source/x/xlrd/xlrd-0.9.4.tar.gz" + + version('0.9.4', '911839f534d29fe04525ef8cd88fe865') + + extends('python') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/python/package.py b/var/spack/repos/builtin/packages/python/package.py index f5237c3b57..f7e1d94567 100644 --- a/var/spack/repos/builtin/packages/python/package.py +++ b/var/spack/repos/builtin/packages/python/package.py @@ -151,6 +151,8 @@ class Python(Package): patterns.append(r'setuptools\.pth') patterns.append(r'bin/easy_install[^/]*$') patterns.append(r'setuptools.*egg$') + if ext_pkg.name != 'py-numpy': + patterns.append(r'bin/f2py$') return match_predicate(ignore_arg, patterns) diff --git a/var/spack/repos/builtin/packages/qt/package.py b/var/spack/repos/builtin/packages/qt/package.py index 93688fb777..1e1d6302f3 100644 --- a/var/spack/repos/builtin/packages/qt/package.py +++ b/var/spack/repos/builtin/packages/qt/package.py @@ -101,7 +101,7 @@ class Qt(Package): @property def common_config_args(self): - return [ + config_args = [ '-prefix', self.prefix, '-v', '-opensource', @@ -115,7 +115,16 @@ class Qt(Package): '-no-openvg', '-no-pch', # NIS is deprecated in more recent glibc - '-no-nis'] + '-no-nis' + ] + + if '+gtk' in self.spec: + config_args.append('-gtkstyle') + else: + config_args.append('-no-gtkstyle') + + return config_args + # Don't disable all the database drivers, but should # really get them into spack at some point. @@ -128,8 +137,7 @@ class Qt(Package): '-thread', '-shared', '-release', - '-fast' - ) + '-fast') @when('@4') def configure(self): diff --git a/var/spack/repos/builtin/packages/qthreads/ldflags.patch b/var/spack/repos/builtin/packages/qthreads/ldflags.patch new file mode 100644 index 0000000000..0c15eab386 --- /dev/null +++ b/var/spack/repos/builtin/packages/qthreads/ldflags.patch @@ -0,0 +1,11 @@ +--- a/configure ++++ b/configure +@@ -40456,7 +40456,7 @@ + hwloc_saved_LDFLAGS="$LDFLAGS" + if test "x$with_hwloc" != x; then + CPPFLAGS="-I$with_hwloc/include $CPPFLAGS" +- LDFLAGS="-L$with_hwloc/lib $CPPFLAGS" ++ LDFLAGS="-L$with_hwloc/lib $LDFLAGS" + fi + + diff --git a/var/spack/repos/builtin/packages/qthreads/package.py b/var/spack/repos/builtin/packages/qthreads/package.py index dacdb71524..5da9340927 100644 --- a/var/spack/repos/builtin/packages/qthreads/package.py +++ b/var/spack/repos/builtin/packages/qthreads/package.py @@ -16,7 +16,12 @@ class Qthreads(Package): version('1.10', '5af8c8bbe88c2a6d45361643780d1671') + patch("ldflags.patch") + patch("restrict.patch") + patch("trap.patch") + def install(self, spec, prefix): - configure("--prefix=%s" % prefix) + configure("--prefix=%s" % prefix, + "--enable-guard-pages") make() make("install") diff --git a/var/spack/repos/builtin/packages/qthreads/restrict.patch b/var/spack/repos/builtin/packages/qthreads/restrict.patch new file mode 100644 index 0000000000..4c95714f6b --- /dev/null +++ b/var/spack/repos/builtin/packages/qthreads/restrict.patch @@ -0,0 +1,12 @@ +--- a/include/qthread/common.h.in ++++ b/include/qthread/common.h.in +@@ -84,7 +84,9 @@ + /* Define to the equivalent of the C99 'restrict' keyword, or to + nothing if this is not supported. Do not define if restrict is + supported directly. */ ++#ifndef restrict + #undef restrict ++#endif + /* Work around a bug in Sun C++: it does not support _Restrict or + __restrict__, even though the corresponding Sun C compiler ends up with + "#define restrict _Restrict" or "#define restrict __restrict__" in the diff --git a/var/spack/repos/builtin/packages/qthreads/trap.patch b/var/spack/repos/builtin/packages/qthreads/trap.patch new file mode 100644 index 0000000000..7aa94d82d5 --- /dev/null +++ b/var/spack/repos/builtin/packages/qthreads/trap.patch @@ -0,0 +1,11 @@ +--- a/include/qthread/qthread.hpp ++++ b/include/qthread/qthread.hpp +@@ -236,7 +236,7 @@ + return qthread_incr64((uint64_t *)operand, incr); + + default: +- *(int *)(0) = 0; ++ __builtin_trap(); + } + return T(0); // never hit - keep compiler happy + } diff --git a/var/spack/repos/builtin/packages/r-BiocGenerics/package.py b/var/spack/repos/builtin/packages/r-BiocGenerics/package.py new file mode 100644 index 0000000000..2d92c1c4d8 --- /dev/null +++ b/var/spack/repos/builtin/packages/r-BiocGenerics/package.py @@ -0,0 +1,14 @@ +from spack import * + +class RBiocgenerics(Package): + """S4 generic functions needed by many Bioconductor packages.""" + + homepage = 'https://www.bioconductor.org/packages/release/bioc/html/BiocGenerics.html' + url = "https://www.bioconductor.org/packages/release/bioc/src/contrib/BiocGenerics_0.16.1.tar.gz" + + version('0.16.1', 'c2148ffd86fc6f1f819c7f68eb2c744f', expand=False) + + extends('R') + + def install(self, spec, prefix): + R('CMD', 'INSTALL', '--library=%s' % self.module.r_lib_dir, '%s' % self.stage.archive_file) diff --git a/var/spack/repos/builtin/packages/r-abind/package.py b/var/spack/repos/builtin/packages/r-abind/package.py new file mode 100644 index 0000000000..d06c7e9240 --- /dev/null +++ b/var/spack/repos/builtin/packages/r-abind/package.py @@ -0,0 +1,18 @@ +from spack import * + +class RAbind(Package): + """Combine multidimensional arrays into a single array. This is a + generalization of 'cbind' and 'rbind'. Works with vectors, matrices, and + higher-dimensional arrays. Also provides functions 'adrop', 'asub', and + 'afill' for manipulating, extracting and replacing data in arrays.""" + + homepage = "https://cran.r-project.org/" + url = "https://cran.r-project.org/src/contrib/abind_1.4-3.tar.gz" + + version('1.4-3', '10fcf80c677b991bf263d38be35a1fc5', expand=False) + + extends('R') + + def install(self, spec, prefix): + + R('CMD', 'INSTALL', '--library=%s' % self.module.r_lib_dir, '%s' % self.stage.archive_file) diff --git a/var/spack/repos/builtin/packages/r-filehash/package.py b/var/spack/repos/builtin/packages/r-filehash/package.py new file mode 100644 index 0000000000..4911c636b4 --- /dev/null +++ b/var/spack/repos/builtin/packages/r-filehash/package.py @@ -0,0 +1,22 @@ +from spack import * + +class RFilehash(Package): + """Implements a simple key-value style database where character string keys + are associated with data values that are stored on the disk. A simple + interface is provided for inserting, retrieving, and deleting data from the + database. Utilities are provided that allow 'filehash' databases to be + treated much like environments and lists are already used in R. These + utilities are provided to encourage interactive and exploratory analysis on + large datasets. Three different file formats for representing the database + are currently available and new formats can easily be incorporated by third + parties for use in the 'filehash' framework.""" + + homepage = 'https://cran.r-project.org/' + url = "https://cran.r-project.org/src/contrib/filehash_2.3.tar.gz" + + version('2.3', '01fffafe09b148ccadc9814c103bdc2f', expand=False) + + extends('R') + + def install(self, spec, prefix): + R('CMD', 'INSTALL', '--library=%s' % self.module.r_lib_dir, '%s' % self.stage.archive_file) diff --git a/var/spack/repos/builtin/packages/r-magic/package.py b/var/spack/repos/builtin/packages/r-magic/package.py new file mode 100644 index 0000000000..e900cdb216 --- /dev/null +++ b/var/spack/repos/builtin/packages/r-magic/package.py @@ -0,0 +1,19 @@ +from spack import * + +class RMagic(Package): + """A collection of efficient, vectorized algorithms for the creation and + investigation of magic squares and hypercubes, including a variety of + functions for the manipulation and analysis of arbitrarily dimensioned + arrays.""" + + homepage = "https://cran.r-project.org/" + url = "https://cran.r-project.org/src/contrib/magic_1.5-6.tar.gz" + + version('1.5-6', 'a68e5ced253b2196af842e1fc84fd029', expand=False) + + extends('R') + + depends_on('r-abind') + + def install(self, spec, prefix): + R('CMD', 'INSTALL', '--library=%s' % self.module.r_lib_dir, '%s' % self.stage.archive_file) diff --git a/var/spack/repos/builtin/packages/raja/package.py b/var/spack/repos/builtin/packages/raja/package.py new file mode 100644 index 0000000000..f807ab71af --- /dev/null +++ b/var/spack/repos/builtin/packages/raja/package.py @@ -0,0 +1,12 @@ +from spack import * + +class Raja(Package): + """RAJA Parallel Framework.""" + homepage = "http://software.llnl.gov/RAJA/" + + version('git', git='https://github.com/LLNL/RAJA.git', branch="master") + + def install(self, spec, prefix): + cmake('.',*std_cmake_args) + make() + make('install') diff --git a/var/spack/repos/builtin/packages/scons/package.py b/var/spack/repos/builtin/packages/scons/package.py new file mode 100644 index 0000000000..594aeced88 --- /dev/null +++ b/var/spack/repos/builtin/packages/scons/package.py @@ -0,0 +1,13 @@ +from spack import * + +class Scons(Package): + """SCons is a software construction tool""" + homepage = "http://scons.org" + url = "http://downloads.sourceforge.net/project/scons/scons/2.5.0/scons-2.5.0.tar.gz" + + version('2.5.0', '9e00fa0df8f5ca5c5f5975b40e0ed354') + + extends('python') + + def install(self, spec, prefix): + python('setup.py', 'install', '--prefix=%s' % prefix) diff --git a/var/spack/repos/builtin/packages/scotch/Makefile.esmumps b/var/spack/repos/builtin/packages/scotch/Makefile.esmumps new file mode 100644 index 0000000000..4bfc760197 --- /dev/null +++ b/var/spack/repos/builtin/packages/scotch/Makefile.esmumps @@ -0,0 +1,5 @@ +esmumps : scotch + (cd esmumps ; $(MAKE) scotch && $(MAKE) install) + +ptesmumps : ptscotch + (cd esmumps ; $(MAKE) ptscotch && $(MAKE) ptinstall) diff --git a/var/spack/repos/builtin/packages/scotch/package.py b/var/spack/repos/builtin/packages/scotch/package.py index 8229ed8686..8fad74b24f 100644 --- a/var/spack/repos/builtin/packages/scotch/package.py +++ b/var/spack/repos/builtin/packages/scotch/package.py @@ -1,88 +1,125 @@ from spack import * -import os +import os, re class Scotch(Package): """Scotch is a software package for graph and mesh/hypergraph partitioning, graph clustering, and sparse matrix ordering.""" + homepage = "http://www.labri.fr/perso/pelegrin/scotch/" - url = "http://gforge.inria.fr/frs/download.php/file/34099/scotch_6.0.3.tar.gz" + url = "http://gforge.inria.fr/frs/download.php/latestfile/298/scotch_6.0.3.tar.gz" + base_url = "http://gforge.inria.fr/frs/download.php/latestfile/298" list_url = "http://gforge.inria.fr/frs/?group_id=248" version('6.0.3', '10b0cc0f184de2de99859eafaca83cfc') + version('6.0.0', 'c50d6187462ba801f9a82133ee666e8e') + version('5.1.10b', 'f587201d6cf5cf63527182fbfba70753') variant('mpi', default=False, description='Activate the compilation of PT-Scotch') variant('compression', default=True, description='Activate the posibility to use compressed files') variant('esmumps', default=False, description='Activate the compilation of the lib esmumps needed by mumps') variant('shared', default=True, description='Build shared libraries') - depends_on('mpi', when='+mpi') - depends_on('zlib', when='+compression') depends_on('flex') depends_on('bison') + depends_on('mpi', when='+mpi') + depends_on('zlib', when='+compression') - def compiler_specifics(self, makefile_inc, defines): - if self.compiler.name == 'gcc': - defines.append('-Drestrict=__restrict') - elif self.compiler.name == 'intel': - defines.append('-restrict') + # NOTE: Versions of Scotch up to version 6.0.0 don't include support for + # building with 'esmumps' in their default packages. In order to enable + # support for this feature, we must grab the 'esmumps' enabled archives + # from the Scotch hosting site. These alternative archives include a strict + # superset of the behavior in their default counterparts, so we choose to + # always grab these versions for older Scotch versions for simplicity. + @when('@:6.0.0') + def url_for_version(self, version): + return '%s/scotch_%s_esmumps.tar.gz' % (Scotch.base_url, version) + + @when('@6.0.1:') + def url_for_version(self, version): + return super(Scotch, self).url_for_version(version) + + # NOTE: Several of the 'esmumps' enabled Scotch releases up to version 6.0.0 + # have broken build scripts that don't properly build 'esmumps' as a separate + # target, so we need a patch procedure to remove 'esmumps' from existing targets + # and to add it as a standalone target. + @when('@:6.0.0') + def patch(self): + makefile_path = os.path.join('src', 'Makefile') + with open(makefile_path, 'r') as makefile: + esmumps_enabled = any(re.search(r'^esmumps(\s*):(.*)$', line) for line in makefile.readlines()) - makefile_inc.append('CCS = $(CC)') + if not esmumps_enabled: + mff = FileFilter(makefile_path) + mff.filter(r'^.*((esmumps)|(ptesmumps)).*(install).*$', '') - if '+mpi' in self.spec: + makefile_esmumps_path = os.path.join(os.path.dirname(os.path.realpath(__file__)), 'Makefile.esmumps') + with open(makefile_path, 'a') as makefile: + makefile.write('\ninclude %s\n' % makefile_esmumps_path) + + @when('@6.0.1:') + def patch(self): + pass + + # NOTE: Configuration of Scotch is achieved by writing a 'Makefile.inc' file + # that contains all of the configuration variables and their desired values + # for the installation. This function writes this file based on the given + # installation variants. + def configure(self): + makefile_inc = [] + cflags = [ + '-O3', + '-DCOMMON_RANDOM_FIXED_SEED', + '-DSCOTCH_DETERMINISTIC', + '-DSCOTCH_RENAME', + '-DIDXSIZE64' + ] + + ## Library Build Type ## + + if '+shared' in self.spec: makefile_inc.extend([ - 'CCP = %s' % os.path.join(self.spec['mpi'].prefix.bin, 'mpicc'), - 'CCD = $(CCP)' - ]) + 'LIB = .so', + 'CLIBFLAGS = -shared -fPIC', + 'RANLIB = echo', + 'AR = $(CC)', + 'ARFLAGS = -shared $(LDFLAGS) -o' + ]) + cflags.append('-fPIC') else: makefile_inc.extend([ - 'CCP = mpicc', # It is set but not used - 'CCD = $(CCS)' - ]) + 'LIB = .a', + 'CLIBFLAGS = ', + 'RANLIB = ranlib', + 'AR = ar', + 'ARFLAGS = -ruv ' + ]) + ## Compiler-Specific Options ## + if self.compiler.name == 'gcc': + cflags.append('-Drestrict=__restrict') + elif self.compiler.name == 'intel': + cflags.append('-restrict') - def library_build_type(self, makefile_inc, defines): - makefile_inc.extend([ - 'LIB = .a', - 'CLIBFLAGS = ', - 'RANLIB = ranlib', - 'AR = ar', - 'ARFLAGS = -ruv ' - ]) + makefile_inc.append('CCS = $(CC)') + makefile_inc.append('CCP = %s' % + (self.spec['mpi'].mpicc if '+mpi' in self.spec else 'mpicc')) + makefile_inc.append('CCD = $(CCS)') - @when('+shared') - def library_build_type(self, makefile_inc, defines): - makefile_inc.extend([ - 'LIB = .so', - 'CLIBFLAGS = -shared -fPIC', - 'RANLIB = echo', - 'AR = $(CC)', - 'ARFLAGS = -shared $(LDFLAGS) -o' - ]) + ## Extra Features ## - def extra_features(self, makefile_inc, defines): ldflags = [] - + if '+compression' in self.spec: - defines.append('-DCOMMON_FILE_COMPRESS_GZ') + cflags.append('-DCOMMON_FILE_COMPRESS_GZ') ldflags.append('-L%s -lz' % (self.spec['zlib'].prefix.lib)) - defines.append('-DCOMMON_PTHREAD') + cflags.append('-DCOMMON_PTHREAD') ldflags.append('-lm -lrt -pthread') - - makefile_inc.append('LDFLAGS = %s' % ' '.join(ldflags)) - def patch(self): - makefile_inc = [] - defines = [ - '-DCOMMON_RANDOM_FIXED_SEED', - '-DSCOTCH_DETERMINISTIC', - '-DSCOTCH_RENAME', - '-DIDXSIZE64' ] + makefile_inc.append('LDFLAGS = %s' % ' '.join(ldflags)) - self.library_build_type(makefile_inc, defines) - self.compiler_specifics(makefile_inc, defines) - self.extra_features(makefile_inc, defines) + ## General Features ## makefile_inc.extend([ 'EXE =', @@ -93,18 +130,19 @@ class Scotch(Package): 'MKDIR = mkdir', 'MV = mv', 'CP = cp', - 'CFLAGS = -O3 %s' % (' '.join(defines)), + 'CFLAGS = %s' % ' '.join(cflags), 'LEX = %s -Pscotchyy -olex.yy.c' % os.path.join(self.spec['flex'].prefix.bin , 'flex'), 'YACC = %s -pscotchyy -y -b y' % os.path.join(self.spec['bison'].prefix.bin, 'bison'), - 'prefix = %s' % self.prefix, - '' + 'prefix = %s' % self.prefix ]) with working_dir('src'): with open('Makefile.inc', 'w') as fh: fh.write('\n'.join(makefile_inc)) - + def install(self, spec, prefix): + self.configure() + targets = ['scotch'] if '+mpi' in self.spec: targets.append('ptscotch') @@ -115,12 +153,10 @@ class Scotch(Package): targets.append('ptesmumps') with working_dir('src'): - for app in targets: - make(app, parallel=(not app=='ptesmumps')) + for target in targets: + make(target, parallel=(target!='ptesmumps')) - install_tree('bin', prefix.bin) install_tree('lib', prefix.lib) install_tree('include', prefix.include) install_tree('man/man1', prefix.share_man1) - diff --git a/var/spack/repos/builtin/packages/serf/package.py b/var/spack/repos/builtin/packages/serf/package.py new file mode 100644 index 0000000000..a5c9057b99 --- /dev/null +++ b/var/spack/repos/builtin/packages/serf/package.py @@ -0,0 +1,51 @@ +############################################################################## +# Copyright (c) 2013, Lawrence Livermore National Security, LLC. +# Produced at the Lawrence Livermore National Laboratory. +# +# This file is part of Spack. +# Written by Todd Gamblin, tgamblin@llnl.gov, All rights reserved. +# LLNL-CODE-647188 +# +# For details, see https://github.com/llnl/spack +# Please also see the LICENSE file for our notice and the LGPL. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License (as published by +# the Free Software Foundation) version 2.1 dated February 1999. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and +# conditions of the GNU General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +############################################################################## +from spack import * + +class Serf(Package): + """Apache Serf - a high performance C-based HTTP client library built upon the Apache Portable Runtime (APR) library""" + homepage = 'https://serf.apache.org/' + url = 'https://archive.apache.org/dist/serf/serf-1.3.8.tar.bz2' + + version('1.3.8', '1d45425ca324336ce2f4ae7d7b4cfbc5567c5446') + + depends_on('apr') + depends_on('apr-util') + depends_on('scons') + depends_on('expat') + depends_on('openssl') + + def install(self, spec, prefix): + scons = which("scons") + + options = ['PREFIX=%s' % prefix] + options.append('APR=%s' % spec['apr'].prefix) + options.append('APU=%s' % spec['apr-util'].prefix) + options.append('OPENSSL=%s' % spec['openssl'].prefix) + options.append('LINKFLAGS=-L%s/lib' % spec['expat'].prefix) + options.append('CPPFLAGS=-I%s/include' % spec['expat'].prefix) + + scons(*options) + scons('install') diff --git a/var/spack/repos/builtin/packages/subversion/package.py b/var/spack/repos/builtin/packages/subversion/package.py index 5db1c3eb92..04cde94aad 100644 --- a/var/spack/repos/builtin/packages/subversion/package.py +++ b/var/spack/repos/builtin/packages/subversion/package.py @@ -37,6 +37,7 @@ class Subversion(Package): depends_on('apr-util') depends_on('zlib') depends_on('sqlite') + depends_on('serf') # Optional: We need swig if we want the Perl, Python or Ruby # bindings. @@ -54,6 +55,7 @@ class Subversion(Package): options.append('--with-apr-util=%s' % spec['apr-util'].prefix) options.append('--with-zlib=%s' % spec['zlib'].prefix) options.append('--with-sqlite=%s' % spec['sqlite'].prefix) + options.append('--with-serf=%s' % spec['serf'].prefix) #options.append('--with-swig=%s' % spec['swig'].prefix) configure(*options) diff --git a/var/spack/repos/builtin/packages/superlu-dist/package.py b/var/spack/repos/builtin/packages/superlu-dist/package.py index 5cf5e129b4..3420d9b90a 100644 --- a/var/spack/repos/builtin/packages/superlu-dist/package.py +++ b/var/spack/repos/builtin/packages/superlu-dist/package.py @@ -6,7 +6,9 @@ class SuperluDist(Package): homepage = "http://crd-legacy.lbl.gov/~xiaoye/SuperLU/" url = "http://crd-legacy.lbl.gov/~xiaoye/SuperLU/superlu_dist_4.1.tar.gz" - version('4.3', 'ee66c84e37b4f7cc557771ccc3dc43ae') + version('5.0.0', '2b53baf1b0ddbd9fcf724992577f0670') + # default to version 4.3 since petsc and trilinos are not tested with 5.0. + version('4.3', 'ee66c84e37b4f7cc557771ccc3dc43ae', preferred=True) version('4.2', 'ae9fafae161f775fbac6eba11e530a65') version('4.1', '4edee38cc29f687bd0c8eb361096a455') version('4.0', 'c0b98b611df227ae050bc1635c6940e0') diff --git a/var/spack/repos/builtin/packages/swig/package.py b/var/spack/repos/builtin/packages/swig/package.py index 8d46c4fe46..78a6c6bbae 100644 --- a/var/spack/repos/builtin/packages/swig/package.py +++ b/var/spack/repos/builtin/packages/swig/package.py @@ -22,6 +22,7 @@ # along with this program; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ############################################################################## + from spack import * class Swig(Package): @@ -33,14 +34,19 @@ class Swig(Package): code. In addition, SWIG provides a variety of customization features that let you tailor the wrapping process to suit your application.""" + homepage = "http://www.swig.org" - url = "http://prdownloads.sourceforge.net/swig/swig-3.0.2.tar.gz" + url = "http://prdownloads.sourceforge.net/swig/swig-3.0.8.tar.gz" + version('3.0.8', 'c96a1d5ecb13d38604d7e92148c73c97') version('3.0.2', '62f9b0d010cef36a13a010dc530d0d41') + version('2.0.12', 'c3fb0b2d710cc82ed0154b91e43085a4') + version('2.0.2', 'eaf619a4169886923e5f828349504a29') + version('1.3.40', '2df766c9e03e02811b1ab4bba1c7b9cc') depends_on('pcre') def install(self, spec, prefix): - configure("--prefix=%s" % prefix) + configure('--prefix=%s' % prefix) make() - make("install") + make('install') diff --git a/var/spack/repos/builtin/packages/the_silver_searcher/package.py b/var/spack/repos/builtin/packages/the_silver_searcher/package.py index e4020b6766..30f06354bf 100644 --- a/var/spack/repos/builtin/packages/the_silver_searcher/package.py +++ b/var/spack/repos/builtin/packages/the_silver_searcher/package.py @@ -9,6 +9,7 @@ class TheSilverSearcher(Package): depends_on('pcre') depends_on('xz') + depends_on('pkg-config') def install(self, spec, prefix): configure("--prefix=%s" % prefix) diff --git a/var/spack/repos/builtin/packages/turbomole/package.py b/var/spack/repos/builtin/packages/turbomole/package.py new file mode 100644 index 0000000000..acc95e3b10 --- /dev/null +++ b/var/spack/repos/builtin/packages/turbomole/package.py @@ -0,0 +1,124 @@ +from spack import * +import os +import subprocess + +class Turbomole(Package): + """TURBOMOLE: Program Package for ab initio Electronic Structure + Calculations. NB: Requires a license to download.""" + + # NOTE: Turbomole requires purchase of a license to download. Go to the + # NOTE: Turbomole home page, http://www.turbomole-gmbh.com, for details. + # NOTE: Spack will search the current directory for this file. It is + # NOTE: probably best to add this file to a Spack mirror so that it can be + # NOTE: found from anywhere. For information on setting up a Spack mirror + # NOTE: see http://software.llnl.gov/spack/mirrors.html + + homepage = "http://www.turbomole-gmbh.com/" + + version('7.0.2', '92b97e1e52e8dcf02a4d9ac0147c09d6', + url="file://%s/turbolinux702.tar.gz" % os.getcwd()) + + variant('mpi', default=False, description='Set up MPI environment') + variant('smp', default=False, description='Set up SMP environment') + + # Turbomole's install is odd. There are three variants + # - serial + # - parallel, MPI + # - parallel, SMP + # + # Only one of these can be active at a time. MPI and SMP are set as + # variants so there could be up to 3 installs per version. Switching + # between them would be accomplished with `module swap` commands. + + def do_fetch(self, mirror_only=True): + if '+mpi' in self.spec and '+smp' in self.spec: + raise InstallError('Can not have both SMP and MPI enabled in the same build.') + super(Turbomole, self).do_fetch(mirror_only) + + def get_tm_arch(self): + # For python-2.7 we could use `tm_arch = subprocess.check_output()` + # Use the following for compatibility with python 2.6 + if 'TURBOMOLE' in os.getcwd(): + tm_arch = subprocess.Popen(['sh', 'scripts/sysname'], + stdout=subprocess.PIPE).communicate()[0] + return tm_arch.rstrip('\n') + else: + return + + def install(self, spec, prefix): + if spec.satisfies('@:7.0.2'): + calculate_version = 'calculate_2.4_linux64' + molecontrol_version = 'MoleControl_2.5' + + tm_arch=self.get_tm_arch() + + tar = which('tar') + dst = join_path(prefix, 'TURBOMOLE') + + tar('-x', '-z', '-f', 'thermocalc.tar.gz') + with working_dir('thermocalc'): + cmd = 'sh install <<<y' + subprocess.call(cmd, shell=True) + + install_tree('basen', join_path(dst, 'basen')) + install_tree('cabasen', join_path(dst, 'cabasen')) + install_tree(calculate_version, join_path(dst, calculate_version)) + install_tree('cbasen', join_path(dst, 'cbasen')) + install_tree('DOC', join_path(dst, 'DOC')) + install_tree('jbasen', join_path(dst, 'jbasen')) + install_tree('jkbasen', join_path(dst, 'jkbasen')) + install_tree(molecontrol_version, join_path(dst, molecontrol_version)) + install_tree('parameter', join_path(dst, 'parameter')) + install_tree('perlmodules', join_path(dst, 'perlmodules')) + install_tree('scripts', join_path(dst, 'scripts')) + install_tree('smprun_scripts', join_path(dst, 'smprun_scripts')) + install_tree('structures', join_path(dst, 'structures')) + install_tree('thermocalc', join_path(dst, 'thermocalc')) + install_tree('TURBOTEST', join_path(dst, 'TURBOTEST')) + install_tree('xbasen', join_path(dst, 'xbasen')) + + install('Config_turbo_env', dst) + install('Config_turbo_env.tcsh', dst) + install('README', dst) + install('README_LICENSES', dst) + install('TURBOMOLE_702_LinuxPC', dst) + + if '+mpi' in spec: + install_tree('bin/%s_mpi' % tm_arch, join_path(dst, 'bin', '%s_mpi' % tm_arch)) + install_tree('libso/%s_mpi' % tm_arch, join_path(dst, 'libso', '%s_mpi' % tm_arch)) + install_tree('mpirun_scripts/%s_mpi' % tm_arch, join_path(dst, 'mpirun_scripts', '%s_mpi' % tm_arch)) + elif '+smp' in spec: + install_tree('bin/%s_smp' % tm_arch, join_path(dst, 'bin', '%s_smp' % tm_arch)) + install_tree('libso/%s_smp' % tm_arch, join_path(dst, 'libso', '%s_smp' % tm_arch)) + install_tree('mpirun_scripts/%s_smp' % tm_arch, join_path(dst, 'mpirun_scripts', '%s_smp' % tm_arch)) + else: + install_tree('bin/%s' % tm_arch, join_path(dst, 'bin', tm_arch)) + if '+mpi' in spec or '+smp' in spec: + install('mpirun_scripts/ccsdf12', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/dscf', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/grad', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/mpgrad', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/pnoccsd', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/rdgrad', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/ricc2', join_path(dst, 'mpirun_scripts')) + install('mpirun_scripts/ridft', join_path(dst, 'mpirun_scripts')) + + def setup_environment(self, spack_env, run_env): + if self.spec.satisfies('@:7.0.2'): + molecontrol_version = 'MoleControl_2.5' + + tm_arch=self.get_tm_arch() + + run_env.set('TURBODIR', join_path(self.prefix, 'TURBOMOLE')) + run_env.set('MOLE_CONTROL', join_path(self.prefix, 'TURBOMOLE', molecontrol_version)) + + run_env.prepend_path('PATH', join_path(self.prefix, 'TURBOMOLE', 'thermocalc')) + run_env.prepend_path('PATH', join_path(self.prefix, 'TURBOMOLE', 'scripts')) + if '+mpi' in self.spec: + run_env.set('PARA_ARCH', 'MPI') + run_env.prepend_path('PATH', join_path(self.prefix, 'TURBOMOLE', 'bin', '%s_mpi' % tm_arch)) + elif '+smp' in self.spec: + run_env.set('PARA_ARCH', 'SMP') + run_env.prepend_path('PATH', join_path(self.prefix, 'TURBOMOLE', 'bin', '%s_smp' % tm_arch)) + else: + run_env.prepend_path('PATH', join_path(self.prefix, 'TURBOMOLE', 'bin', tm_arch)) diff --git a/var/spack/repos/builtin/packages/unibilium/package.py b/var/spack/repos/builtin/packages/unibilium/package.py new file mode 100644 index 0000000000..ef5de56f79 --- /dev/null +++ b/var/spack/repos/builtin/packages/unibilium/package.py @@ -0,0 +1,12 @@ +from spack import * + +class Unibilium(Package): + """A terminfo parsing library""" + homepage = "https://github.com/mauke/unibilium" + url = "https://github.com/mauke/unibilium/archive/v1.2.0.tar.gz" + + version('1.2.0', '9b1c97839a880a373da6c097443b43c4') + + def install(self, spec, prefix): + make("PREFIX="+prefix) + make("install", "PREFIX="+prefix) diff --git a/var/spack/repos/builtin/packages/wget/package.py b/var/spack/repos/builtin/packages/wget/package.py index 55728b0515..4b92659478 100644 --- a/var/spack/repos/builtin/packages/wget/package.py +++ b/var/spack/repos/builtin/packages/wget/package.py @@ -17,6 +17,8 @@ class Wget(Package): def install(self, spec, prefix): configure("--prefix=%s" % prefix, - "--with-ssl=openssl") + "--with-ssl=openssl", + "OPENSSL_CFLAGS=-I%s" % spec['openssl'].prefix.include, + "OPENSSL_LIBS=-L%s -lssl -lcrypto -lz" % spec['openssl'].prefix.lib) make() make("install") diff --git a/var/spack/repos/builtin/packages/xerces-c/package.py b/var/spack/repos/builtin/packages/xerces-c/package.py index b59ab178ae..bd02ddcd4b 100644 --- a/var/spack/repos/builtin/packages/xerces-c/package.py +++ b/var/spack/repos/builtin/packages/xerces-c/package.py @@ -1,19 +1,3 @@ -# FIXME: -# This is a template package file for Spack. We've conveniently -# put "FIXME" labels next to all the things you'll want to change. -# -# Once you've edited all the FIXME's, delete this whole message, -# save this file, and test out your package like this: -# -# spack install xerces-c -# -# You can always get back here to change things with: -# -# spack edit xerces-c -# -# See the spack documentation for more information on building -# packages. -# from spack import * class XercesC(Package): @@ -24,8 +8,8 @@ class XercesC(Package): """ homepage = "https://xerces.apache.org/xerces-c" - url = "https://www.apache.org/dist/xerces/c/3/sources/xerces-c-3.1.2.tar.gz" - version('3.1.2', '9eb1048939e88d6a7232c67569b23985') + url = "https://www.apache.org/dist/xerces/c/3/sources/xerces-c-3.1.3.tar.bz2" + version('3.1.3', '5e333b55cb43e6b025ddf0e5d0f0fb0d') def install(self, spec, prefix): configure("--prefix=%s" % prefix, diff --git a/var/spack/repos/builtin/packages/zoltan/package.py b/var/spack/repos/builtin/packages/zoltan/package.py index e20ae81adb..738dfb508b 100644 --- a/var/spack/repos/builtin/packages/zoltan/package.py +++ b/var/spack/repos/builtin/packages/zoltan/package.py @@ -1,3 +1,4 @@ +import re, os, glob from spack import * class Zoltan(Package): @@ -12,8 +13,13 @@ class Zoltan(Package): base_url = "http://www.cs.sandia.gov/~kddevin/Zoltan_Distributions" version('3.83', '1ff1bc93f91e12f2c533ddb01f2c095f') + version('3.8', '9d8fba8a990896881b85351d4327c4a9') + version('3.6', '9cce794f7241ecd8dbea36c3d7a880f9') version('3.3', '5eb8f00bda634b25ceefa0122bd18d65') + variant('debug', default=False, description='Builds a debug version of the library') + variant('shared', default=True, description='Builds a shared version of the library') + variant('fortran', default=True, description='Enable Fortran support') variant('mpi', default=False, description='Enable MPI support') @@ -24,28 +30,49 @@ class Zoltan(Package): '--enable-f90interface' if '+fortan' in spec else '--disable-f90interface', '--enable-mpi' if '+mpi' in spec else '--disable-mpi', ] + config_cflags = [ + '-O0' if '+debug' in spec else '-O3', + '-g' if '+debug' in spec else '-g0', + ] + + if '+shared' in spec: + config_args.append('--with-ar=$(CXX) -shared $(LDFLAGS) -o') + config_args.append('RANLIB=echo') + config_cflags.append('-fPIC') if '+mpi' in spec: - config_args.append('--with-mpi=%s' % spec['mpi'].prefix) - config_args.append('--with-mpi-compilers=%s' % spec['mpi'].prefix.bin) config_args.append('CC=%s/mpicc' % spec['mpi'].prefix.bin) config_args.append('CXX=%s/mpicxx' % spec['mpi'].prefix.bin) + config_args.append('--with-mpi=%s' % spec['mpi'].prefix) + config_args.append('--with-mpi-compilers=%s' % spec['mpi'].prefix.bin) # NOTE: Early versions of Zoltan come packaged with a few embedded # library packages (e.g. ParMETIS, Scotch), which messes with Spack's # ability to descend directly into the package's source directory. - if spec.satisfies('@:3.3'): + if spec.satisfies('@:3.6'): cd('Zoltan_v%s' % self.version) mkdirp('build') cd('build') config_zoltan = Executable('../configure') - config_zoltan('--prefix=%s' % pwd(), *config_args) + config_zoltan( + '--prefix=%s' % pwd(), + '--with-cflags=%s' % ' '.join(config_cflags), + '--with-cxxflags=%s' % ' '.join(config_cflags), + *config_args) make() make('install') + # NOTE: Unfortunately, Zoltan doesn't provide any configuration options for + # the extension of the output library files, so this script must change these + # extensions as a post-processing step. + if '+shared' in spec: + for libpath in glob.glob('lib/*.a'): + libdir, libname = (os.path.dirname(libpath), os.path.basename(libpath)) + move(libpath, os.path.join(libdir, re.sub(r'\.a$', '.so', libname))) + mkdirp(prefix) move('include', prefix) move('lib', prefix) |