Age | Commit message (Collapse) | Author | Files | Lines |
|
* Add two no-op jobs named "all-prechecks" and "all"
These are a suggestion from @tgamblin, they are stable named markers we
can use from gitlab and possibly for required checks to make CI more
resilient to refactors changing the names of specific checks.
* Enable parallel testing using xdist for unit testing in CI
* Normalize tmp paths to deal with macos
* add -u flag compatibility to spack python
As of now, it is accepted and ignored. The usage with xdist, where it
is invoked specifically by `python -u spack python` which is then passed
`-u` by xdist is the entire reason for doing this. It should never be
used without explicitly passing -u to the executing python interpreter.
* use spack python in xdist to support python 2
When running on python2, spack has many import cycles unless started
through main. To allow that, this uses `spack python` as the
interpreter, leveraging the `-u` support so xdist doesn't error out when
it unconditionally requests unbuffered binary IO.
* Use shutil.move to account for tmpdir being in a separate filesystem sometimes
|
|
This patchset refactors our GitHub actions into a single top-level ci workflow that
invokes a series of reusable actions. The main goal of this is to be able to easily
control which tests run and in what order based on the success or failure of top-level
prechecks. Our previous workflows ran in three sets:
* nix tests: style and verification first, then linux and macos tests if successful
* windows tests: style and verification first, then linux and macos tests if successful
* bootstrap tests
As a result, the bootstrap tests ran even if the style failed, and style and verification
had to run on two different platforms despite running identical checks. I'm relatively
sure that's because of the limitation on dependencies between steps in the jobs.
Reusable workflows allow us to run the style, verification and now audit checks once,
then depending on the results, and the files changed, run the appropriate nix, windows
and bootstrap tests. While it saves only a few minutes by itself, this makes it easier to
refactor checks to subset tests without having to replicate tests or other workflow
components in the future.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
|
|
|
|
* CI: reduce the amount of tests run in the original concretizer
* Don't test Python 3.6 on the original concretizer
|
|
* Deprecate support for Python 3.5 (by removing it from CI)
* Restore Python 3.9
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 4.1.0 to 4.2.0.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/c4e89fac7e8767b327bbad6cb4d859eda999cf08...b55428b1882923874294fa556849718a1d7f2ca5)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
This adds necessary configuration for flake8 and black to work together.
This also sets the line length to 99, per the data here:
* https://github.com/spack/spack/pull/24718#issuecomment-876933636
Given the data and the spirit of black's 88-character limit, we set the limit to 99
characters for all of Spack, because:
* 99 is one less than 100, a nice round number, and all lines will fit in a
100-character wide terminal (even when the text editor puts a \ at EOL).
* 99 is just past the knee the file size curve for packages, and it means that packages
remain readable and not significantly longer than they are now.
* It doesn't seem to hurt core -- files in core might change length by a few percent but
seem like they'll be mostly the same as before -- just a bit more roomy.
- [x] set line length to 99
- [x] remove most exceptions from `.flake8` and add the ones black cares about
- [x] add `[tool.black]` to `pyproject.toml`
- [x] make `black` run if available in `spack style --fix`
Co-Authored-By: Tom Scogland <tscogland@llnl.gov>
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 4.0.0 to 4.1.0.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/d09bd5e6005b175076f227b13d9730d56e9dcfcb...c4e89fac7e8767b327bbad6cb4d859eda999cf08)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
When installing setuptools from sources in Spack, we might
get into weird failures due to the way we use pip.
In particular, for Spack it's necessary to install in a
non-isolated pip environment to allow using PYTHONPATH as a
selection method for all the build requirements of a
Python package.
This can fail when installing setuptools since there might
be a setuptools version already installed for the Python
interpreter being used, with different entry points than
the one we want to install.
Installing from wheels both pip and setuptools should
harden our installation procedure in the context of:
- Bootstrapping Python dependencies of Spack
- Using external Python packages
|
|
fixes #31109
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 3.1.2 to 4.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/98f2ad02fd48d057ee3b4d4f66525b231c3e52b6...d09bd5e6005b175076f227b13d9730d56e9dcfcb)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
* Cancel running workflows automatically on PR update
* Add the last update later to check cancellation is working
* Use github.run_number instead of github.sha
|
|
|
|
Bumps [actions/checkout](https://github.com/actions/checkout) from 2 to 3.0.2.
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](https://github.com/actions/checkout/compare/v2...2541b1294d2704b0964813337f33b291d3f8596b)
---
updated-dependencies:
- dependency-name: actions/checkout
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 3.0.0 to 3.1.0.
- [Release notes](https://github.com/codecov/codecov-action/releases)
- [Changelog](https://github.com/codecov/codecov-action/blob/master/CHANGELOG.md)
- [Commits](https://github.com/codecov/codecov-action/compare/e3c560433a6cc60aec8812599b7844a7b4fa0d71...81cd2dc8148241f03f5839d295e000b8f761e378)
---
updated-dependencies:
- dependency-name: codecov/codecov-action
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 3.1.1 to 3.1.2.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/21c0493ecfd34b1217f0a90ec19a327f3cc0a048...98f2ad02fd48d057ee3b4d4f66525b231c3e52b6)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
* Add support for Python 3.10
* Update unit-tests to use 3.10
* Update Getting started section of the docs
* Update bootstrap action
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 3.1.0 to 3.1.1.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/9c644ca2ab8e57ea0a487b5ec2f8290740378bfd...21c0493ecfd34b1217f0a90ec19a327f3cc0a048)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 2.1.0 to 3.
- [Release notes](https://github.com/codecov/codecov-action/releases)
- [Changelog](https://github.com/codecov/codecov-action/blob/master/CHANGELOG.md)
- [Commits](https://github.com/codecov/codecov-action/compare/f32b3a3741e1053eb607407145bc9619351dc93b...e3c560433a6cc60aec8812599b7844a7b4fa0d71)
---
updated-dependencies:
- dependency-name: codecov/codecov-action
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 2 to 3.1.0.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/v2...9c644ca2ab8e57ea0a487b5ec2f8290740378bfd)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 2.3.1 to 3.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/f38219332975fe8f9c04cca981d674bf22aea1d3...0ebf233433c08fb9061af664d501c3f3ff0e9e20)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/checkout](https://github.com/actions/checkout) from 2 to 3.
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](https://github.com/actions/checkout/compare/v2...a12a3943b4bdde767164f792f33f40b04645d846)
---
updated-dependencies:
- dependency-name: actions/checkout
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
|
|
|
|
Hotfix for coverage v6.3 blocking our CI workflows
|
|
Only test Python 2.7, 3.6 and 3.9
|
|
* Add a CI job to audit all the packages in the built-in repository
* flecsi: fixed typo for dependency on legion
* py-pythonqwt: fix a typo in variant name
* sollve: removed a conflict with a non-existing variant
* acts: fixed use of wrong variant in dd4hep
Also removed duplicated variant declaration in dd4hep
* aoflagger: update variant of a dependency
Issues introduced indirectly in #22925
* camellia: removed unused variant
Issue introduced indirectly in #26150
* cbtf-*: remove cti variants and dependency on mrnet+cti
Issue introduced in #14178
* flecsale: update variants to match flecsi
Issue introduced in #11679
* grnboost: fixed issue with non-existing variant in a dependency
This package possibly never worked since #8763
* nalu: fixed issue with non-existing variant in a dependency
* open-iscsi: fixed issue with non-existing variant in a dependency
* openspeedshop-*: remove use of non-existing mrnet+cti variant
* percept: fixed issue with non-existing variant in a dependency
* phyluce: fixed issue with non-existing variant in a dependency
Issue introduced in #12952
* phyluce: fixed issue with non-existing variant in a dependency
Issue introduced in #22340
|
|
Modifications:
- [x] Removed `centos:6` unit test, adjusted vermin checks
- [x] Removed backport of `collections.OrderedDict`
- [x] Removed backport of `functools.total_ordering`
- [x] Removed Python 2.6 specific skip markers in unit tests
- [x] Fixed a few minor Python 2.6 related TODOs in code
Updating the vendored dependencies will be done in separate PRs
|
|
Currently Spack vendors `pytest` at a version which is three major
versions behind the latest (3.2.5 vs. 6.2.4). We do that since v3.2.5
is the latest version supporting Python 2.6. Remaining so much
behind the currently supported versions though might introduce
some incompatibilities and is surely a technical debt.
This PR modifies Spack to:
- Use the vendored `pytest@3.2.5` only as a fallback solution,
if the Python interpreter used for Spack doesn't provide a newer one
- Be able to parse `pytest --collect-only` in all the different output
formats from v3.2.5 to v6.2.4 and use it consistently for `spack unit-test --list-*`
- Updating the unit tests in Github Actions to use a more recent `pytest` version
|
|
Some tests assume the base branch is develop, but this branch may not
have been checked out.
|
|
Bumps [actions/checkout](https://github.com/actions/checkout) from 2.3.5 to 2.4.0.
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](https://github.com/actions/checkout/compare/1e204e9a9253d643386038d443f96446fa156a97...ec3a7ce113134d7a93b817d10a8272cb61118579)
---
updated-dependencies:
- dependency-name: actions/checkout
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/checkout](https://github.com/actions/checkout) from 2.3.4 to 2.3.5.
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](https://github.com/actions/checkout/compare/5a4ac9002d0be2fb38bd78e4b4dbde5606d7042f...1e204e9a9253d643386038d443f96446fa156a97)
---
updated-dependencies:
- dependency-name: actions/checkout
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
|
|
We moved documentation tests to readthedocs since a while,
so remove the one on GitHub.
|
|
This makes it easier to run tests in a fork.
|
|
Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 2.0.3 to 2.1.0.
- [Release notes](https://github.com/codecov/codecov-action/releases)
- [Changelog](https://github.com/codecov/codecov-action/blob/master/CHANGELOG.md)
- [Commits](https://github.com/codecov/codecov-action/compare/v2.0.3...v2.1.0)
---
updated-dependencies:
- dependency-name: codecov/codecov-action
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Modifications:
- [x] Change `defaults/config.yaml`
- [x] Add a fix for bootstrapping patchelf from sources if `compilers.yaml` is empty
- [x] Make `SPACK_TEST_SOLVER=clingo` the default for unit-tests
- [x] Fix package failures in the e4s pipeline
Caveats:
1. CentOS 6 still uses the original concretizer as it can't connect to the buildcache due to issues with `ssl` (bootstrapping from sources requires a C++14 capable compiler)
1. I had to update the image tag for GitlabCI in e699f14.
1. libtool v2.4.2 has been deprecated and other packages received some update
|
|
Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 2.0.2 to 2.0.3.
- [Release notes](https://github.com/codecov/codecov-action/releases)
- [Changelog](https://github.com/codecov/codecov-action/blob/master/CHANGELOG.md)
- [Commits](https://github.com/codecov/codecov-action/compare/v2.0.2...v2.0.3)
---
updated-dependencies:
- dependency-name: codecov/codecov-action
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
* Add a __reduce__ method to SpecBuildInterface
This class was confusing pickle when being serialized,
due to its scary nature of being an object that disguise
as another type.
* Add more MacOS tests, switch them to clingo
* Fix condition syntax
* Remove Python v3.6 and v3.9 with macOS
|
|
* Ubuntu 20.04 provides kcov, so don't build from source
* Use two undocumented options for kcov v3.8
|
|
* Bootstrap clingo from binaries
* Move information on clingo binaries to a JSON file
* Add support to bootstrap on Cray
Bootstrapping on Cray requires, at the moment, to
swap the platform when looking for binaries - due
to #22800.
* Add SHA256 verification for bootstrapped software
Use sha256 verification for binaries necessary to bootstrap
the concretizer and gpg for signature verification
* patchelf: use Spec._old_concretize() to bootstrap
As noted in #24450 we may happen to need the
concretizer when bootstrapping clingo. In that case
only the old concretizer is available.
* Add a schema for bootstrapping methods
Two fields have been added to bootstrap.yaml:
"sources" which lists the methods available for
bootstrapping software
"trusted" which records if a source is trusted or not
A subcommand has been added to "spack bootstrap" to list
the sources currently available.
* Methods used for bootstrapping are configurable from bootstrap:sources
The function that tries to ensure a given Python module
is importable now tries bootstrapping methods in the same
order as they are defined in `bootstrap.yaml`
* Permit to trust/untrust bootstrapping methods
* Add binary tests for MacOS, Ubuntu
* Add documentation
* Add a note on bash
|
|
This adds a `--root` option so that `spack style` can check style for
a spack instance other than its own.
We also change the inner workings of `spack style` so that `--config FILE`
(and similar options for the various tools) options are used. This ensures
that when `spack style` runs, it always uses the config from the running spack,
and does *not* pick up configuration from the external root.
- [x] add `--root` option to `spack style`
- [x] add `--config` (or similar) option when invoking style tools
- [x] add a test that verifies we can check an external instance
|
|
This uses our bootstrapping logic to automatically install dependencies for
`spack style`. Users should no longer have to pre-install all of the tools
(`isort`, `mypy`, `black`, `flake8`). The command will do it for them.
- [x] add logic to bootstrap specs with specific version requirements in `spack style`
- [x] remove style tools from CI requirements (to ensure we test bootstrapping)
- [x] rework dependencies for `mypy` and `py-typed-ast`
- `py-typed-ast` needs to be a link dependency
- it needs to be at 1.4.1 or higher to work with python 3.9
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
|
|
* build(deps): bump codecov/codecov-action from 1 to 2.0.1
Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 1 to 2.0.1.
- [Release notes](https://github.com/codecov/codecov-action/releases)
- [Changelog](https://github.com/codecov/codecov-action/blob/master/CHANGELOG.md)
- [Commits](https://github.com/codecov/codecov-action/compare/v1...v2.0.1)
---
updated-dependencies:
- dependency-name: codecov/codecov-action
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
* Update arguments to codecov action
* Try to delete the symbolic link to root folder
Hopefully this should get rid of the ELOOP error
* Delete also for shell tests and MacOS
* Bump to v2.0.2
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Getting rid of another top-level file.
`coverage.py` has supported `pyproject.toml` since version 5.0, and
all versions of coverage so far work with python 2.7. We just need to
ensure that a version of coverage with the `toml` extra is installed
in the test environment.
I tested this with `coverage run`, `coverage report`, and `coverage html`.
|
|
This moves our `mypy` configuration from `.mypy.ini` to `.pyproject.toml`
and increases the minimum `mypy` version in the tests.
- [x] move `mypy` configuration to `pyproject.toml`
- [x] remove `.mypy.ini`
- [x] ensure that `mypy` version .900 or higher is used in tests
|
|
* fix remaining flake8 errors
* imports: sort imports everywhere in Spack
We enabled import order checking in #23947, but fixing things manually drives
people crazy. This used `spack style --fix --all` from #24071 to automatically
sort everything in Spack so PR submitters won't have to deal with it.
This should go in after #24071, as it assumes we're using `isort`, not
`flake8-import-order` to order things. `isort` seems to be more flexible and
allows `llnl` mports to be in their own group before `spack` ones, so this
seems like a good switch.
|
|
`dateutil.parser` was an optional dependency for CVS tests. It was failing on macOS
beacuse the dateutil types were not being installed, and mypy was failing *even when the
CVS tests were skipped*. This seems like it was an oversight on macOS --
`types-dateutil-parser` was not installed there, though it was on Linux unit tests.
It takes 6 lines of YAML and some weird test-skipping logic to get `python-dateutil` and
`types-python-dateutil` installed in all the tests where we need them, but it only takes
4 lines of code to write the date parser we need for CVS, so I just did that instead.
Note that CVS date format can vary from system to system, but it seems like it's always
pretty similar for the parts we care about.
- [x] Replace dateutil.parser with a simpler date regex
- [x] Lose the dependency on `dateutil.parser`
|
|
- [x] Remove flake8-import-order checks, as we only need isort for this
- [x] Clean up configuration and requirements
|
|
|