Age | Commit message (Collapse) | Author | Files | Lines |
|
CNL, debian6 and Suse are not compatible
|
|
|
|
|
|
|
|
Variants in concrete specs are "always" correct -- or at least we assume
them to be b/c they were concretized before. Their variants need not match
the current version of the package.
|
|
Multi-valued variants previously maximized default values to handle
cases where the default contained two values, e.g.:
variant("foo", default="bar,baz")
This is because previously we were minimizing non-default values, and
`foo=bar`, `foo=baz`, and `foo=bar,baz` all had the same score, as
none of them had any "non-default" values.
This commit changes the approach and considers a non-default value
to be either a value set to something not default *or* the absence
of a default value from the set value. This allows multi- and
single-valued variants to be handled the same way, with the same
minimization criterion. It alse means that the "best" value for every
optimization criterion is now zero, which allows us to make useful
assumptions about the optimization criteria.
|
|
Minimizing builds is tricky. We want a minimizing criterion because
we want to reuse the avaialble installs, but we also want things that
have to be built to stick to *default preferences* from the package
and from the user. We therefore treat built specs differently and
apply a different set of optimization criteria to them. Spack's *first*
priority is to reuse what it can, but if it builds something, the built
specs will respect defaults and preferences.
This is implemented by bumping the priority of optimization criteria
for built specs -- so that they take precedence over the otherwise
topmost-priority criterion to reuse what is installed.
The scheme relies on all of our optimization criteria being minimizations.
That is, we need the case where all specs are reused to be better than
any built spec could be. Basically, if nothing is built, all the build
criteria are zero (the best possible) and the number of built packages
dominates. If something *has* to be built, it must be strictly worse
than full reuse, because:
1. it increases the number of built specs
2. it must have either zero or some positive number for all criteria
Our optimziation criteria effectively sum into two buckets at once to
accomplish this. We use a `build_priority()` number to shift the
priority of optimization criteria for built specs higher.
|
|
The constraints in the `spack diff` test were very specific and assumed
a lot about the structure of what was being diffed. Relax them a bit to
make them more resilient to changes.
|
|
Make the first minimization conditional on whether `--reuse` is enabled in the solve.
If `--reuse` is not enabled, there will be nothing in the set to minimize and the
objective function (for this criterion) will be 0 for every answer set.
|
|
Many of the integrity constraints in the concretizer are there to restrict how solves are done, but
they ignore that past solves may have had different initial conditions. For example, for things
we're building, we want the allowed variants to be restricted to those currently in Spack packages,
but if we are reusing a concrete spec, we need to be flexible about names that may have existed in
old packages.
Similarly, restrictions around compatibility of OS's, compiler versions, compiler OS support, etc.
are really only about what is supported by the *current* set of compilers/build tools known to
Spack, not about what we may get from concrete specs.
- [x] restrict certain integrity constraints to only apply to packages that we need to build, and
omit concrete specs from consideration.
|
|
The OS logic in the concretizer is still the way it was in the first version.
Defaults are implemented in a fairly inflexible way using straight logic. Most
of the other sections have been reworked to leave these kinds of decisions to
optimization. This commit does that for OS's as well.
As with targets, we optimize for target matches. We also try to optimize for
OS matches between nodes. Additionally, this commit adds the notion of
"OS compatibility" where we allow for builds to depend on binaries for certain
other OS's. e.g, for macos, a bigsur build can depend on an already installed
(concrete) catalina build. One cool thing about this is that we can declare
additional compatible OS's later, e.g. CentOS and RHEL.
|
|
The concretizer doesn't get a say in whether constraints from
concrete specs are imposed, so use body facts for them.
|
|
|
|
|
|
|
|
Co-authored-by: sbulut <sbulut@3vgeomatics.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
|
|
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
|
|
If we don't rename Spack will fail with:
```
ImportError: cannot bootstrap the "clingo" Python module from spec "clingo-bootstrap@spack+python %gcc target=x86_64" due to the following failures:
'spack-install' raised ValueError: Invalid config scope: 'bootstrap'. Must be one of odict_keys(['_builtin', 'defaults', 'defaults/cray', 'bootstrap/cray', 'disable_modules', 'overrides-0'])
Please run `spack -d spec zlib` for more verbose error messages
```
in case bootstrapping from binaries fails and we are
falling back to bootstrapping from sources.
|
|
|
|
|
|
|
|
|
|
ensure that none of ^intel-mkl, ^intel-mpi, and ^mkl are used, unless
the compiler is intel.
Fix bad logic in the src/src_xs/m_makespectrum.f90 file in the oxygen version.
Add the -fallow-argument-mismatch for gcc >= 10.
|
|
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
|
|
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
|
|
|
|
* add exaworks spack meta package
* add maintainer
* switch to `BundlePackage`
* flake8
* another flake8 fix
* remove incorrect dependency
|
|
|
|
|
|
|
|
* scr: 3.0rc2 release, variants and deps updates
This adds 3.0rc2 release for end users to aid in testing scr for
upcoming 3.0 release.
Included in this change:
- Require most recent component versions for this release
- Add a variant for PDSH as it is now an optional dependency with
this release
- Add bbapi and datawarp (dw) variants
- bbapi_fallback variant now requires bbapi variant with latest
release
- Add variants to enable/disable examples and tests
- Add shared variant and current conflicts with ~shared
- Update cmake_args to account for added variants where needed
Additional updates:
- Add maintainers
- Use lists and for loops to clean up repetitive code involving all
components
- Use self.define and self.define_from_variant to clean up cmake_args
- Use consistent quoting throughout package
* Un-deprecate v2 and legacy
* Use new conditional variants
|
|
Define new variants asdf, hdf5, rnpl, silo to allow disabling or
enabling dependencies.
|
|
|
|
|
|
The Makefile expects the "other" libtool, not the GNU libtool we have in Spack.
Closes https://github.com/spack/spack/issues/26993
Co-authored-by: Bernhard Kaindl <bernhardkaindl7@gmail.com>
|
|
Co-authored-by: Bernhard Kaindl <bernhardkaindl7@gmail.com>
|
|
|
|
|
|
* trilinos: fix @13.0.1+tpetra^cuda@11
* Mark CUDA conflict with old versions and always define TPL
* trilinos: patch doesn't build so just mark as conflict
|
|
Update `warpx` & `py-warpx` to the latest release, `21.11`.
|
|
Version 2.5.4 adds an option which allows Nemsio to be built without MPI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A common question from users has been how to model variants
that are new in new versions of a package, or variants that are
dependent on other variants. Our stock answer so far has been
an unsatisfying combination of "just have it do nothing in the old
version" and "tell Spack it conflicts".
This PR enables conditional variants, on any spec condition. The
syntax is straightforward, and matches that of previous features.
|
|
* GnuPG: allow bootstrapping from buildcache and sources
* Add a test to bootstrap GnuPG from binaries
* Disable bootstrapping in tests
* Add e2e test to bootstrap GnuPG from sources on Ubuntu
* Add e2e test to bootstrap GnuPG on macOS
|
|
* Update spack load docs
|