Age | Commit message (Collapse) | Author | Files | Lines |
|
(cherry picked from commit a37c916dff5a5c6e72f939433931ab69dfd731bd)
|
|
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
|
|
* bugfix for active when pkg is already active error
Co-authored-by: Greg Becker <becker33@llnl.gov>
|
|
fixes #22565
This change enforces the uniqueness of the version_weight
atom per node(Package) in the DAG. It does so by applying
FTSE and adding an extra layer of indirection with the
possible_version_weight/2 atom.
Before this change it may have happened that for the same
node two different version_weight/2 were in the answer set,
each of which referred to a different spec with the same
version, and their weights would sum up.
This lead to unexpected result like preferring to build a
new version of an external if the external version was
older.
|
|
fixes #22596
Variants which are specified in an external spec are not
scored negatively if they encode a non-default value.
|
|
* clingo: modify recipe for bootstrapping
Modifications:
- clingo builds with shared Python only if ^python+shared
- avoid building the clingo app for bootstrapping
- don't link to libpython when bootstrapping
* Remove option that breaks on linux
* Give more hints for the current Python
* Disable CLINGO_BUILD_PY_SHARED for bootstrapping
* bootstrapping: try to detect the current python from std library
This is much faster than calling external executables
* Fix compatibility with Python 2.6
* Give hints on which compiler and OS to use when bootstrapping
This change hints which compiler to use for bootstrapping clingo
(either GCC or Apple Clang on MacOS). On Cray platforms it also
hints to build for the frontend system, where software is meant
to be installed.
* Use spec_for_current_python to constrain module requirement
(cherry picked from commit d5fa509b072f0e58f00eaf81c60f32958a9f1e1d)
|
|
* ASP-based solver: avoid adding values to variants when they're set
fixes #22533
fixes #21911
Added a rule that prevents any value to slip in a variant when the
variant is set explicitly. This is relevant for multi-valued variants,
in particular for those that have disjoint sets of values.
* Ensure disjoint sets have a clear semantics for external packages
|
|
fixes #22547
SingleFileScope was not able to repopulate its cache before this
change. This was affecting the configuration seen by environments
using clingo bootstrapped from sources, since the bootstrapping
operation involved a few cache invalidation for config files.
|
|
A search and replace went wrong in 2264e30d99d8b9fbdec8fa69b594e53d8ced15a1.
Thanks to @wadudmiah who reported this issue.
|
|
|
|
In most cases, we want condition_holds(ID) to imply any imposed
constraints associated with the ID. However, the dependency relationship
in Spack is special because it's "extra" conditional -- a dependency
*condition* may hold, but we have decided that externals will not have
dependencies, so we need a way to avoid having imposed constraints appear
for nodes that don't exist.
This introduces a new rule that says that constraints are imposed
*unless* we define `do_not_impose(ID)`. This allows rules like
dependencies, which rely on more than just spec conditions, to cancel
imposed constraints.
We add one special case for this: dependencies of externals.
|
|
We only consider test dependencies some of the time. Some packages are
*only* test dependencies. Spack's algorithm was previously generating
dependency conditions that could hold, *even* if there was no potential
dependency type.
- [x] change asp.py so that this can't happen -- we now only generate
dependency types for possible dependencies.
|
|
This builds on #20638 by unifying all the places in the concretizer where
things are conditional on specs. Previously, we duplicated a common spec
conditional pattern for dependencies, virtual providers, conflicts, and
externals. That was introduced in #20423 and refined in #20507, and
roughly looked as follows.
Given some directives in a package like:
```python
depends_on("foo@1.0+bar", when="@2.0+variant")
provides("mpi@2:", when="@1.9:")
```
We handled the `@2.0+variant` and `@1.9:` parts by generating generated
`dependency_condition()`, `required_dependency_condition()`, and
`imposed_dependency_condition()` facts to trigger rules like this:
```prolog
dependency_conditions_hold(ID, Parent, Dependency) :-
attr(Name, Arg1) : required_dependency_condition(ID, Name, Arg1);
attr(Name, Arg1, Arg2) : required_dependency_condition(ID, Name, Arg1, Arg2);
attr(Name, Arg1, Arg2, Arg3) : required_dependency_condition(ID, Name, Arg1, Arg2, Arg3);
dependency_condition(ID, Parent, Dependency);
node(Parent).
```
And we handled `foo@1.0+bar` and `mpi@2:` parts ("imposed constraints")
like this:
```prolog
attr(Name, Arg1, Arg2) :-
dependency_conditions_hold(ID, Package, Dependency),
imposed_dependency_condition(ID, Name, Arg1, Arg2).
attr(Name, Arg1, Arg2, Arg3) :-
dependency_conditions_hold(ID, Package, Dependency),
imposed_dependency_condition(ID, Name, Arg1, Arg2, Arg3).
```
These rules were repeated with different input predicates for
requirements (e.g., `required_dependency_condition`) and imposed
constraints (e.g., `imposed_dependency_condition`) throughout
`concretize.lp`. In #20638 it got to be a bit confusing, because we used
the same `dependency_condition_holds` predicate to impose constraints on
conditional dependencies and virtual providers. So, even though the
pattern was repeated, some of the conditional rules were conjoined in a
weird way.
Instead of repeating this pattern everywhere, we now have *one* set of
consolidated rules for conditions:
```prolog
condition_holds(ID) :-
condition(ID);
attr(Name, A1) : condition_requirement(ID, Name, A1);
attr(Name, A1, A2) : condition_requirement(ID, Name, A1, A2);
attr(Name, A1, A2, A3) : condition_requirement(ID, Name, A1, A2, A3).
attr(Name, A1) :- condition_holds(ID), imposed_constraint(ID, Name, A1).
attr(Name, A1, A2) :- condition_holds(ID), imposed_constraint(ID, Name, A1, A2).
attr(Name, A1, A2, A3) :- condition_holds(ID), imposed_constraint(ID, Name, A1, A2, A3).
```
this allows us to use `condition(ID)` and `condition_holds(ID)` to
encapsulate the conditional logic on specs in all the scenarios where we
need it. Instead of defining predicates for the requirements and imposed
constraints, we generate the condition inputs with generic facts, and
define predicates to associate the condition ID with a particular
scenario. So, now, the generated facts for a condition look like this:
```prolog
condition(121).
condition_requirement(121,"node","cairo").
condition_requirement(121,"variant_value","cairo","fc","True").
imposed_constraint(121,"version_satisfies","fontconfig","2.10.91:").
dependency_condition(121,"cairo","fontconfig").
dependency_type(121,"build").
dependency_type(121,"link").
```
The requirements and imposed constraints are generic, and we associate
them with their meaning via the id. Here, `dependency_condition(121,
"cairo", "fontconfig")` tells us that condition 121 has to do with the
dependency of `cairo` on `fontconfig`, and the conditional dependency
rules just become:
```prolog
dependency_holds(Package, Dependency, Type) :-
dependency_condition(ID, Package, Dependency),
dependency_type(ID, Type),
condition_holds(ID).
```
Dependencies, virtuals, conflicts, and externals all now use similar
patterns, and the logic for generating condition facts is common to all
of them on the python side, as well. The more specific routines like
`package_dependencies_rules` just call `self.condition(...)` to get an id
and generate requirements and imposed constraints, then they generate
their extra facts with the returned id, like this:
```python
def package_dependencies_rules(self, pkg, tests):
"""Translate 'depends_on' directives into ASP logic."""
for _, conditions in sorted(pkg.dependencies.items()):
for cond, dep in sorted(conditions.items()):
condition_id = self.condition(cond, dep.spec, pkg.name) # create a condition and get its id
self.gen.fact(fn.dependency_condition( # associate specifics about the dependency w/the id
condition_id, pkg.name, dep.spec.name
))
# etc.
```
- [x] unify generation and logic for conditions
- [x] use unified logic for dependencies
- [x] use unified logic for virtuals
- [x] use unified logic for conflicts
- [x] use unified logic for externals
LocalWords: concretizer mpi attr Arg concretize lp cairo fc fontconfig
LocalWords: virtuals def pkg cond dep fn refactor github py
|
|
This change accounts for platform specific configuration scopes,
like ~/.spack/linux, during bootstrapping. These scopes were
previously not accounted for and that was causing issues e.g.
when searching for compilers.
(cherry picked from commit 413c422e53843a9e33d7b77a8c44dcfd4bf701be)
|
|
* Allow the bootstrapping of clingo from sources
Allow python builds with system python as external
for MacOS
* Ensure consistent configuration when bootstrapping clingo
This commit uses context managers to ensure we can
bootstrap clingo using a consistent configuration
regardless of the use case being managed.
* Github actions: test clingo with bootstrapping from sources
* Add command to inspect and clean the bootstrap store
Prevent users to set the install tree root to the bootstrap store
* clingo: documented how to bootstrap from sources
Co-authored-by: Gregory Becker <becker33@llnl.gov>
(cherry picked from commit 10e9e142b75c6ca8bc61f688260c002201cc1b22)
|
|
Bash has a builtin `fc` that will override the compiler if you use "fc",
so it's better to use the full spack-supplied compiler path.
Additionally, the filter regex in the docs was wrong: it replaced the
entire assignment operation with the RHS.
|
|
* py-kubernetes: add new package
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-kubernetes: remove alpha/beta versions, fix dependency types
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
|
|
This PR updates the abinit package. The underlying build system has
several changes from previous versions, which are reflected in the
package recipe.
- added version 9.4.2
- removed commented out code
- add new libxml2 variant, with dependency and conflicts
- add dependency on atompaw
- depend on fftw-api when ~openmp
This allows other fftw implementations to be used. This PR adds MKL.
- depend on netcdf explicitly
- remove hdf5 variant as hdf5 is required
- only use wannier90 if +mpi as the wannier90 spack package is MPI only
- allow newer versions of libxc for abinit 9
- split configure options for versions before and after abinit 9
- always use MPI compiler wrappers
- add patch to remove march settings for version 9
- Set conflict for fftw~openmp if abinit+openmp
This allows the virtual fftw-api to be used for the dependency. If fftw
is the fftw-api provider then bail if fftw~openmp is set when
abinit+openmp is used.
- Set conflicts for +openmp and mkl
- Be explicit about +mkl for intel-parallel-studio
- Add TODO entry for switching conflicts/depends_on logic
|
|
|
|
This installs the example source files into $prefix/example, for use by the E4S Testsuite and other end users.
Also fixes a harmless copy/paste error.
|
|
(cherry picked from commit 138312efabd534fa42d1a16e172e859f0d2b5842)
|
|
|
|
* clingo/clingo-bootstrap: added a package with option for bootstrapping clingo
package builds in Release mode
uses GCC options to link libstdc++ and libgcc statically
* clingo-bootstrap: apple-clang options to bootstrap statically on darwin
* clingo: fix the path of the Python interpreter
In case multiple Python versions are in the same prefix
(e.g. when clingo is built against an external Python),
it may happen that the Python used by CMake does not
match the corresponding node in the current spec.
This is fixed here by defining "Python_EXECUTABLE"
properly as a hint to CMake.
* clingo: the commit for "spack" version has been updated.
|
|
|
|
Most people installing `clingo` with Spack are going to be doing it to
use the new concretizer, and that requires the `master` branch.
- [x] make `master` the default so we don't have to keep telling people
to install `clingo@master`. We'll update the preferred version when
there's a new release.
|
|
* make `spack fetch` work with environments
* previously: `spack fetch` required the explicit statement of
the specs to be fetched, even when in an environment
* now: if there is no spec(s) provided to `spack fetch` we check
if an environment is active and if yes we fetch all
uninstalled specs.
|
|
|
|
* Update pylint to 2.8.2
* Update var/spack/repos/builtin/packages/py-pylint/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Address comments
* Update
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
|
|
Change-Id: I34d1e14c071f91d9a451740abcbcc31701a47830
|
|
Change-Id: I76392841a9973aa7b5ec347b0405a78635989a79
|
|
* New package: py-pybind11-stubgen
Change-Id: I865b92e08ecefa6eb1327ee0166544fd4ae22953
* fixup
Change-Id: I6030cebecce229d02ab1a20fe6fa501eec22b804
|
|
This solves a few FIXMEs in conftest.py, where
we were manipulating globals and seeing side
effects prior to registering fixtures.
This commit solves the FIXMEs, but introduces
a performance regression on tests that may need
to be investigated
(cherry picked from commit 4558dc06e21e01ab07a43737b8cb99d1d69abb5d)
|
|
(cherry picked from commit 61c1b71d38e62a5af81b3b7b8a8d12b954d99f0a)
|
|
The context manager can be used to swap the current
configuration temporarily, for any use case that may need it.
(cherry picked from commit 553d37a6d62b05f15986a702394f67486fa44e0e)
|
|
The context manager can be used to swap the current
store temporarily, for any use case that may need it.
(cherry picked from commit cb2c233a97073f8c5d89581ee2a2401fef5f878d)
|
|
The method is now called "use_repositories" and
makes it clear in the docstring that it accepts
as arguments either Repo objects or paths.
Since there was some duplication between this
contextmanager and "use_repo" in the testing framework,
remove the latter and use spack.repo.use_repositories
across the entire code base.
Make a few adjustment to MockPackageMultiRepo, since it was
stating in the docstring that it was supposed to mock
spack.repo.Repo and was instead mocking spack.repo.RepoPath.
(cherry picked from commit 1a8963b0f4c11c4b7ddd347e6cd95cdc68ddcbe0)
|
|
|
|
giflib 5.20+ no longer uses autotools
Co-authored-by: Ivan Razumov <ivan.razumov@cern.ch>
|
|
There clingo-cffi job has two issues to be solved:
1. It uses the default concretizer
2. It requires a package from https://test.pypi.org/simple/
The former can be fixed by setting the SPACK_TEST_SOLVER
environment variable to "clingo".
The latter though requires clingo-cffi to be pushed to a
more stable package index (since https://test.pypi.org/simple/
is meant as a scratch version of PyPI that can be wiped at
any time).
For the time being run the tests in a container. Switch back to
PyPI whenever a new official version of clingo will be released.
|
|
* Support clingo when used with cffi
Clingo recently merged in a new Python module option based on cffi.
Compatibility with this module requires a few changes to spack - it does not automatically convert strings/ints/etc to Symbol and clingo.Symbol.string throws on failure.
manually convert str/int to clingo.Symbol types
catch stringify exceptions
add job for clingo-cffi to Spack CI
switch to potassco-vendored wheel for clingo-cffi CI
on_unsat argument when cffi
(cherry picked from commit 93ed1a410c4a202eab3a68769fd8c0d4ff8b1c8e)
|
|
* Improve error message for inconsistencies in package.py
Sometimes directives refer to variants that do not exist.
Make it such that:
1. The name of the variant
2. The name of the package which is supposed to have
such variant
3. The name of the package making this assumption
are all printed in the error message for easier debugging.
* Add unit tests
(cherry picked from commit 7226bd64dc3b46a1ed361f1e9d7fb4a2a5b65200)
|
|
The "fact" method before was dealing with multiple facts
registered per call, which was used when we were emitting
grounded rules from knowledge of the problem instance.
Now that the encoding is changed we can simplify the method
to deal only with a single fact per call.
(cherry picked from commit ba42c36f00fe40c047121a32117018eb93e0c4b1)
|
|
(cherry picked from commit 40a40e0265d6704a7836aeb30a776d66da8f7fe6)
|
|
|
|
|
|
* Modification to R environment
This PR modifies how the R environmnet is presented, and fixes
installing the standalone Rmath library.
- The Rmath build and install methods are combined into one
- Set parallel=False when installing Rmath
- remove the run environment that set up variables for libraries and
headers that are not really needed, and pollute the environment.
* Add setup_run_environment back
- Add back the setup_run_environment with LD_LIBRARY_PATH and
PKG_CONFIG_PATH.
- Adjust documentation to reflect the current code.
|
|
|
|
|
|
|
|
|