summaryrefslogtreecommitdiff
path: root/etc
AgeCommit message (Collapse)AuthorFilesLines
2022-05-13Reuse concretization by default (#30396)Massimiliano Culpo1-2/+2
* Enable reuse by default in Spack * Update documentation to match new default * Configure pipelines not to reuse software
2022-05-10Add a Lua build-system (#28854)Tom Scogland1-1/+2
Reworking lua to allow easier substitution of the base lua implementation. Also adding in a maintained version of luajit and re-factoring the entire stack to use a custom build-system to centralize functionality like environment variable management and luarocks installation. The `lua-lang` virtual is now versioned so that a package that requires Lua 5.1 semantics can get any lua, but one that requires 5.2 will only get upstream lua. The luaposix package requires lua-bit32, but only when built with a lua conforming to version 5.1. This adds the package, and the dependencies, but exposed a problem with luarocks dependency detection. Since we're installing each package in its own "tree" and there's no environment variable to list extra trees, spack now generates a luarocks config file that lists all the trees of all the dependencies, and references it by setting `LUAROCKS_CONFIG` in the build environment of every LuaPackage. This allows luarocks to find the spack installed dependencies correctly rather than trying (and failing) to download them. Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com> Co-authored-by: Tom Scogland <tscogland@llnl.gov> Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
2022-04-25ASP-based solver: allow configuring target selection (#29835)Massimiliano Culpo1-0/+13
* ASP-based solver: allow configuring target selection This commit adds a new "concretizer:targets" configuration section, and two options under it. - "concretizer:targets:granularity" allows switching from considering only generic targets to consider all possible microarchitectures. - "concretizer:targets:host_compatible" instead controls whether we can concretize for microarchitectures that are incompatible with the current host. * Add documentation * Add unit-tests
2022-04-13Add support for Python 3.10 (#29581)Massimiliano Culpo1-4/+13
* Add support for Python 3.10 * Update unit-tests to use 3.10 * Update Getting started section of the docs * Update bootstrap action
2022-04-08Deprecate top-level module config (#28659)Harmen Stoppels1-6/+3
* Ignore top-level module config; add auto-update In Spack 0.17 we got module sets (modules:[name]:[prop]), and for backwards compat modules:[prop] was short for modules:default:[prop]. But this makes it awkward to define default config for the "default" module set. Since 0.17 is branched off, we can now deprecate top-level module config (that is, just ignore it with a warning). This PR does that, and it implements `spack config update modules` to make upgrading easy (we should have added that to 0.17 already...) It also removes references to `dotkit` stuff which was already deprecated in 0.13 and could have been removed in 0.14. Prefix inspections are the only exception, since the top-level prefix inspections used for `spack load` and `spack env activate`.
2022-03-17Expand external find for Windows (#27588)John Parent1-1/+1
* Incorporate new search location * Add external user option * proper doc string * Explicit commands in getting started * raise during chgrp on Win recover installer changes Notate admin privleges Windows phase install hooks Find external python and install ninja (#23496) Allow external find python to find windows python and spack install ninja Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com> Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
2022-03-17Packaging of netlib-lapack for windows (#24993)Jared Popelar1-0/+5
MSVC's internal CMake and Ninja now detected by spack external find and added to packages.yaml Saving progress on packaging zlib for Windows Fixing the shared CMake flag * Loading Intel's ifx Fortran compiler into MSVC; if there are multiple versions of MSVC installed and detected, ifx will only be placed into the first block written in compilers.yaml. The version number of ifx can be detected using MSVC's version flag (instead of /QV) by using ignore_version_errors. This commit also provides support for detection of Intel compilers in their own compiler block by adding ifx.exe to the fc/f77_name blocks inside intel.py * Giving CMake a Fortran compiler argument * Adding patch file for removing duplicated mangling header for versions 3.9.1 and older; static and shared now successfully building on Windows * Have netlib-lapack depend on ninja@1.10 Co-authored-by: John R. Cary <cary@txcorp.com> Co-authored-by: Jared Popelar <jpopelar@txcorp.com> Making a default config.yaml for Windows Small path length for build_stage Provide more prerequisite details, mention default config.yaml Killing an unnecessary setvars call Replacing some lost changes, proofreading, updating windows-supported package list Co-authored-by: John Parent <john.parent@kitware.com>
2022-02-16config: add a new `concretizer` config sectionTodd Gamblin2-4/+24
The concretizer is going to grow to have many more configuration, and we really need some structured config for that. * We have the `config:concretizer` option that chooses the solver, but extending that is awkward (we'd need to replace a string with a `dict`) and the solver choice will be deprecated eventually. * We have the `concretization` option in environments, but it's not a top-level config section -- it's just for environments, and it also only admits a string right now. To avoid overlapping with either of these and to allow the most extensibility in the future, this adds a new `concretizer` config section that can be used in and outside of environments. There is only one option right now: `reuse`. This can expand to include other options later. Likely, we will soon deprecate `config:concretizer` and warn when the user doesn't use `clingo`, and we will eventually (sometime later) move the `together` / `separately` options from `concretization` into the top-level `concretizer` section. This commit just adds the new section and schema. Fully wiring it up is TBD.
2022-01-18Switch lmod default all:autoload from none to direct (#28357)Harmen Stoppels1-0/+6
* Switch lmod module all autoload default from none to direct * Fix the docs
2022-01-11Packaging: Virtual package for libllvm (#27200)kwryankrattiger1-0/+1
Add an abstraction around libllvm to allow libllvm providers to be specified for all packages. This is targeting allowing mesa to build against llvm-amdgpu or intel-llvm or llvm or any other custom llvm variant that arises for specific GPU toolchains
2021-10-28config: fix `SPACK_DISABLE_LOCAL_CONFIG`, remove `$user_config_path` (#27022)Todd Gamblin1-2/+2
There were some loose ends left in ##26735 that cause errors when using `SPACK_DISABLE_LOCAL_CONFIG`. - [x] Fix hard-coded `~/.spack` references in `install_test.py` and `monitor.py` Also, if `SPACK_DISABLE_LOCAL_CONFIG` is used, there is the issue that `$user_config_path`, when used in configuration files, makes no sense, because there is no user config scope. Since we already have `$user_cache_path` in configuration files, and since there really shouldn't be *any* data stored in a configuration scope (which is what you'd configure in `config.yaml`/`bootstrap.yaml`/etc., this just removes `$user_config_path`. There will *always* be a `$user_cache_path`, as Spack needs to write files, but we shouldn't rely on the existence of a particular configuration scope in the Spack code, as scopes are configurable, both in number and location. - [x] Remove `$user_config_path` substitution. - [x] Fix reference to `$user_config_path` in `etc/spack/deaults/bootstrap.yaml` to refer to `$user_cache_path`, which is where it was intended to be.
2021-10-26config: overrides for caches and system and user scopes (#26735)Harmen Stoppels2-6/+6
Spack's `system` and `user` scopes provide ways for administrators and users to set global defaults for all Spack instances, but for use cases where one wants a clean Spack installation, these scopes can be undesirable. For example, users may want to opt out of global system configuration, or they may want to ignore their own home directory settings when running in a continuous integration environment. Spack also, by default, keeps various caches and user data in `~/.spack`, but users may want to override these locations. Spack provides three environment variables that allow you to override or opt out of configuration locations: * `SPACK_USER_CONFIG_PATH`: Override the path to use for the `user` (`~/.spack`) scope. * `SPACK_SYSTEM_CONFIG_PATH`: Override the path to use for the `system` (`/etc/spack`) scope. * `SPACK_DISABLE_LOCAL_CONFIG`: set this environment variable to completely disable *both* the system and user configuration directories. Spack will only consider its own defaults and `site` configuration locations. And one that allows you to move the default cache location: * `SPACK_USER_CACHE_PATH`: Override the default path to use for user data (misc_cache, tests, reports, etc.) With these settings, if you want to isolate Spack in a CI environment, you can do this: export SPACK_DISABLE_LOCAL_CONFIG=true export SPACK_USER_CACHE_PATH=/tmp/spack This is a stop-gap approach until we have figured out how to deal with the system and user config scopes more generally, as there are plans to potentially / eventually get rid of them. **User config** Spack is a bit of a pain when you have: - a shared $HOME folder across different systems. - multiple Spack versions on the same system. **System config** - On shared systems with a versioned programming environment / toolkit, system administrators want to provide config for each version (e.g. 21.09, 21.10) of the programming environment, and the user Spack instance should be able to pick this up without a steep learning curve. - On shared systems the user should be able to opt out of the hard-coded config scope in /etc/spack, since it may be incompatible with their particular instance. Currently Spack can only opt out of all config scopes through overrides with `"config:":`, `"packages:":`, but that also drops the defaults config, which would have to be repeated, which is undesirable, especially the lengthy packages.yaml. An example use case is: having config in this folder: ``` /path/to/programming/environment/{version}/{compilers,packages}.yaml ``` and have `module load spack-system-config` set the variable ``` SPACK_SYSTEM_CONFIG_PATH=/path/to/programming/environment/{version} ``` where the user no longer has to worry about what `{version}` they are on. **Continuous integration** Finally, there is the use case of continuous integration, which may clone an arbitrary Spack version, which optimally should not pick up system or user config from the previous run (like may happen in classical bare metal non-containerized filesystem side effect ridden jenkins pipelines). In fact this is very similar to how spack itself tries to avoid picking up system dependencies during builds... **But environments solve this?** - You could do `include`s in environment files to get similar behavior to the spack_system_config_path example, but environments require you to: 1) require paths to individual config files, not directories. 2) fail if the listed config file does not exist - They allow you to override config scopes, but this is generally too rigurous, as it requires you to repeat the default config, in particular packages.yaml, and just defies the point of layered config. Co-authored-by: Tom Scogland <tscogland@llnl.gov> Co-authored-by: Tim Fuller <tjfulle@sandia.gov> Co-authored-by: Steve Leak <sleak@lbl.gov> Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
2021-10-11installer: Support showing status information in terminal title (#16259)Michael Kuhn1-1/+6
Installing packages with a lot of dependencies does not have an easy way of judging the current progress (apart from running `spack spec -I pkg` in another terminal). This change allows Spack to update the terminal's title with status information, including its current progress as well as information about the current and total number of packages.
2021-09-14Make clingo the default solver (#25502)Massimiliano Culpo1-4/+3
Modifications: - [x] Change `defaults/config.yaml` - [x] Add a fix for bootstrapping patchelf from sources if `compilers.yaml` is empty - [x] Make `SPACK_TEST_SOLVER=clingo` the default for unit-tests - [x] Fix package failures in the e4s pipeline Caveats: 1. CentOS 6 still uses the original concretizer as it can't connect to the buildcache due to issues with `ssl` (bootstrapping from sources requires a C++14 capable compiler) 1. I had to update the image tag for GitlabCI in e699f14. 1. libtool v2.4.2 has been deprecated and other packages received some update
2021-08-18Bootstrap clingo from binaries (#22720)Massimiliano Culpo1-0/+25
* Bootstrap clingo from binaries * Move information on clingo binaries to a JSON file * Add support to bootstrap on Cray Bootstrapping on Cray requires, at the moment, to swap the platform when looking for binaries - due to #22800. * Add SHA256 verification for bootstrapped software Use sha256 verification for binaries necessary to bootstrap the concretizer and gpg for signature verification * patchelf: use Spec._old_concretize() to bootstrap As noted in #24450 we may happen to need the concretizer when bootstrapping clingo. In that case only the old concretizer is available. * Add a schema for bootstrapping methods Two fields have been added to bootstrap.yaml: "sources" which lists the methods available for bootstrapping software "trusted" which records if a source is trusted or not A subcommand has been added to "spack bootstrap" to list the sources currently available. * Methods used for bootstrapping are configurable from bootstrap:sources The function that tries to ensure a given Python module is importable now tries bootstrapping methods in the same order as they are defined in `bootstrap.yaml` * Permit to trust/untrust bootstrapping methods * Add binary tests for MacOS, Ubuntu * Add documentation * Add a note on bash
2021-08-02document config option "url_fetch_method" (#24638)loulawrence1-0/+4
- Change config from the undocumented `use_curl: true/false` to `url_fetch_method: urllib/curl`. - Documentation of `url_fetch_method` in `defaults/config.yaml` - Default fetch option explicitly set to `urllib` for users who may not have curl on their system To upgrade from `use_curl` to `url_fetch_method`, run `spack config update config`
2021-07-27pbs: new virtual package (#24568)Seth R. Johnson1-0/+1
* pbs: new virtual package Some of our clusters have an older installation of libtorque and tm.h that are *not* from OpenPBS. Using the current openpbs dependency for openmpi causes concretization errors due to restrictions on older python and hwloc requirements that don't apply, even with an external non-buildable installation. The new 'torque' bundle package allows users to point to that external installation without problems. Detailed description of torque by Sergey Kosukhin <skosukhin@gmail.com>
2021-07-12Enable/disable bootstrapping and customize store location (#23677)Massimiliano Culpo1-0/+7
* Permit to enable/disable bootstrapping and customize store location This PR adds configuration handles to allow enabling and disabling bootstrapping, and to customize the store location. * Move bootstrap related configuration into its own YAML file * Add a bootstrap command to manage configuration
2021-06-28Hdf5 cmake (#18937)Larry Knox1-1/+1
* Switch hdf5 package from autotools to cmake. * Add variant for building with zlib, default to ON. * Update for format requirements. * Format change. * Fix breakage from last merge from develop. Switch szip to use libaec (unrestricted encryption). Remove 'static' variant: static libs will only be installed when ~shared. * Improve args based on suggestions from pull request. * Update code URL to github.com Add/modify 4 depends_on lines to fix running "spack graph --deptype=link hdf5". * Remove trailing whitespace. * Remove dependencies added solely to make "spack greph --type=link" work. * Add new version HDF5 1.8.22. * Remove unnecessary java_check. * Fix whitespace for style checks. * Reverted zlib version dependency to 1.1.2:. zlib variant removed. api version default renamed "default". * Remove blank line. * Whitespace corrections. * iRemoved unnecessary 'debug' variant. * Fix typo in version number in conflict for '+szip'. * Set default for tools variant to True. Remove patch functions dependent on 'libtool' file that cmake doesn't produce. * Remove line to set ONLY_SHARED_LIBS to true. Add post_install code to install only one version of tools with shared linkage and original tool names. * Remove trailing white space and import of glob package not used. * Leave BUILD_TESTING set to default which is ON. * Remove post_install code to install only one version of tools because some dependent packages running tests in e4s testing are using h5diff-shared. Keep both tools versions for now. * No longer need to import os.
2021-06-15add irep and lua-lang virtual dependency (#22492)Richarda Butler1-0/+1
This adds a package for `irep`, a tool for reading `lua` input decks from Fortran, C, and C++. `irep` can be built with either `lua` or `luajit`. To address this, we also add a virtual package for lua called `lua-lang`. `luajit` isn't, by default, a drop-in replacement for `lua`, but we add a `+lualinks` variant to it that adds symlinks that make it behave like `lua@5.1`. With this variant enabled, it provides the `lua-lang` virtual. `lua` always provides `lua-lang`. - [x] add `irep` package - [x] add `+lualinks` variant to `lua-luajit` - [x] create `lua-lang` virtual, provided by `lua` and `luajit+lualinks` Co-authored-by: Kayla Richarda Butler <butler59@quartz1148.llnl.gov> Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
2021-06-11Fixing provides directive for intel-oneapi-onedal package (#24108)Nikolay Petrov1-0/+1
2021-06-04apply default linux prefix inspections to all module sets (#24151)Greg Becker1-6/+5
2021-05-28Separable module configuration -- without the bugs this time (#23703)Greg Becker3-17/+24
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment). This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention. As part of this change, the module roots configuration moved from the config section to inside each module configuration. Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec.
2021-05-28Use AWS CloudFront for source mirror (#23978)Todd Gamblin1-1/+1
Spack's source mirror was previously in a plain old S3 bucket. That will still work, but we can do better. This switches to AWS's CloudFront CDN for hosting the mirror. CloudFront is 16x faster (or more) than the old bucket. - [x] change mirror to https://mirror.spack.io
2021-05-27Add fuse virtual dependency, new macfuse package (#23904)Adam J. Stewart2-6/+5
2021-05-26defaults/cray: use modules.yaml from defaults/linux (#23932)eugeneswalker1-0/+21
2021-05-25Add xxd for hsa-rocr-dev build script (#23855)Harmen Stoppels1-4/+5
2021-05-17Revert "Separable module configurations (#22588)" (#23674)Harmen Stoppels4-27/+22
This reverts commit cefbe48c89209dc3df654795644973b1885cdea4.
2021-05-14Separable module configurations (#22588)Greg Becker4-22/+27
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment). This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention. As part of this change, the module roots configuration moved from the `config` section to inside each module configuration. Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec. TODO: - [x] code changes to support multiple module sets - [x] code changes to support modules relative to a view - [x] Tests for multiple module configurations - [x] Tests for modules relative to a view - [x] Backwards compatibility for module roots from config section - [x] Backwards compatibility for default module set without the name specified - [x] Tests for backwards compatibility
2021-03-30Make -j flag less exceptional (#22360)Harmen Stoppels1-5/+7
* Make -j flag less exceptional The -j flag in spack behaves differently from make, ctest, ninja, etc, because it caps the number of jobs to an arbitrary number 16. Spack will behave like other tools if `spack install` uses a reasonable default, and `spack install -j <num>` *overrides* that default. This will be particularly useful for Spack usage outside of a traditional HPC context and for HPC centers that encourage users to compile on login nodes with many cores instead of on compute nodes, which has become increasingly common as individual nodes have more cores. This maintains the existing default value of min(num_cpus, 16). However, as it is right now, Spack does a poor job at determining the number of cpus on linux, since it doesn't take cgroups into account. This is particularly problematic when using distributed builds with slurm. This PR also introduces `spack.util.cpus.cpus_available()` to consolidate knowledge on determining the number of available cores, and improves core detection for linux. This should also improve core detection for Docker/ Kubernetes, which also use cgroups.
2021-03-03zig: add new package at v0.7.1 (#22046)Massimiliano Culpo1-0/+1
2021-02-23Drop compiler variables from spack load (#21699)Harmen Stoppels1-10/+0
Drops: * C_INCLUDE_PATH * CPLUS_INCLUDE_PATH * LIBRARY_PATH * INCLUDE We already decided to use C_INCLUDE_PATH, CPLUS_INCLUDE_PATH, INCLUDE over CPATH here: https://github.com/spack/spack/pull/14749 However, none of these flags apply to Fortran on Linux. So for consistency it seems better to make the user use -I and -L flags by hand or through pkgconfig.
2021-02-09Procedure to deprecate old versions of software (#20767)Adam J. Stewart1-1/+6
* Procedure to deprecate old versions of software * Add documentation * Fix bug in logic * Update tab completion * Deprecate legacy packages * Deprecate old mxnet as well * More explicit docs
2021-02-04config: (darwin only) change prefix of external libuuid (#21480)Laurent Aphecetche1-1/+1
2020-12-30Use system libuuid on macOS (#20608)Adam J. Stewart1-0/+9
2020-12-29Introduce virtual provider uuid (#18322)Michael Kuhn1-0/+1
libuuid is currently contained in util-linux, libuuid and uuid. This change introduces a new virtual provider `uuid` and renames the existing `uuid` package to `ossp-uuid`. util-linux's libuuid is provided in the form of a separate package util-linux-uuid to make sure that packages depending on uuid and util-linux can use a separate uuid implementation, which the concretizer does not allow if libuuid is contained in util-linux.
2020-11-30Fix Mesa GLES conflicts (#20184)Chuck Atkins1-1/+1
2020-11-18spack test (#15702)Greg Becker1-0/+4
Users can add test() methods to their packages to run smoke tests on installations with the new `spack test` command (the old `spack test` is now `spack unit-test`). spack test is environment-aware, so you can `spack install` an environment and then run `spack test run` to run smoke tests on all of its packages. Historical test logs can be perused with `spack test results`. Generic smoke tests for MPI implementations, C, C++, and Fortran compilers as well as specific smoke tests for 18 packages. Inside the test method, individual tests can be run separately (and continue to run best-effort after a test failure) using the `run_test` method. The `run_test` method encapsulates finding test executables, running and checking return codes, checking output, and error handling. This handles the following trickier aspects of testing with direct support in Spack's package API: - [x] Caching source or intermediate build files at build time for use at test time. - [x] Test dependencies, - [x] packages that require a compiler for testing (such as library only packages). See the packaging guide for more details on using Spack testing support. Included is support for package.py files for virtual packages. This does not change the Spack interface, but is a major change in internals. Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov> Co-authored-by: wspear <wjspear@gmail.com> Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
2020-11-17concretizer: add a configuration option to use new or old concretizerTodd Gamblin1-0/+16
- [x] spec.py can call out to the new concretizer - [x] config.yaml now has an option to choose a concretizer (original, clingo)
2020-11-12move sbang to unpadded install tree root (#19640)Greg Becker1-0/+7
Since #11598 sbang has been installed within the install_tree. This doesn’t play nicely with install_tree padding, since sbang can’t do its job if it is installed in a long path (this is the whole point of sbang). This PR changes the padding specification. Instead of $padding inside paths, we now have a separate `padding:` field in the `install_tree` configuration. Previously, the `install_tree` looked like this: ``` /path/to/opt/spack_padding_padding_padding_padding_padding/ bin/ sbang .spack-db/ ... linux-rhel7-x86_64/ ... ``` ``` This PR updates things to look like this: /path/to/opt/ bin/ sbang spack_padding_padding_padding_padding_padding/ .spack-db/ ... linux-rhel7-x86_64/ ... So padding is added at the start of all install prefixes *within* the unpadded root. The database and all installations still go under the padded root. This ensures that `sbang` is in the shorted possible path while also allowing us to make long paths for relocatable binaries.
2020-10-31[NEW] Added amdfftw, amdlibflame and amdscalapack recipes (#19457)vijay kallesh1-4/+5
* [NEW] Added amdfftw, amdlibflame and amdscalapack recipes Updated base fftw, libflame and netlib-scalapack recipes to accommodate the above listed AMD Optimizing CPU Libraries which are a set of numerical routines optimized for AMD platforms. Updated amdblis spack recipe amdblis: 1. updated with amdblis 2.2 release amdfftw: 1. "--enable-single" now work as synonym for "--enable-float" amdlibflame: 1. Added enable_or_disable_threads() to set value for "--enable-multithreading" flag Libflame: 1. Added enable_or_disable_threads() to set value for "--enable-multithreading" flag 2. Corrected invocation of "enable_or_disable('threads')" Change-Id: I9da0a2c2c4e2075b7fa2776e7cfe6548a2e0b32f * Added amd-toolchain-support as maintainers Added team github account amd-toolchain-support as maintainers for all the recipes owned by AMD Optimizing CPU Libraries (AOCL) team Change-Id: I9a7969bd48fc42cfbb88dd7bd93e0802c6138582 * Incorporated review comments Updated packages.yaml with aocl components Handled Flake8 test failures Change-Id: I0a03f02d8c9f326b2434ec907958c3de3a8e18eb * Readded accidental removal of stream recipe amdfftw: 1. Updated the aocc clang selection as per spack standards fftw: 1. Currently apple-clang section is redundant, already it is handled in the conflict checks. Change-Id: Idef4a3f61717eb81f321e0cd16e7ba9619eac846 * Fix for style and docs/validate (pull_request) test unnumbered format placeholders from {} to {0} Change-Id: If67a3374177ec067573e5504462d257712fafc05 * changed compiler references to Spack's compiler wrapper:spack_cc, spack_cxx, spack_fc Change-Id: I7ae29c978fff16e37773913f14c84df232499763 * Removed 'single' variant from amdfftw recipe Instead of conflict for apple-clang + openmp, handled this senario via below available feature: depends_on('llvm-openmp', when='%apple-clang +openmp') Change-Id: I701b23d83e822a500ca3aaf2b60cc9ace09e13dc * Added relevant info for users who prefers to use single precision Change-Id: I3506e21da428ddef5fb7895b5aaed32c2a061ef6 * Minor changes on fftw, amdfftw and libflame amdfftw: 1. Removed escape symbol to the single quotes 2. Rewording the conflict line from Recommended to Required fftw: 1. Reorded to following recommended sections: versions, variants, dependencies, providers, patches libflame: 1. Added provides entry for 5.1.0 version Change-Id: I21ebff99b6dfde031763154693ecb3f1fa47b476 * Removed single quote from amdfftw docstring to fix style failures Change-Id: Ife939a5a2f5ccbc8879b730c7bebfe2fcfef9332
2020-10-30mesa: Retire older autotools mesa as mesa18 and create current meson mesa ↵Chuck Atkins1-2/+3
(#19528)
2020-10-20Adding AOCC compiler to SPACK community (#19345)GaneshPrasadMA1-1/+1
* Adding AOCC compiler to SPACK community The AOCC compiler system offers a high level of advanced optimizations, multi-threading and processor support that includes global optimization, vectorization, inter-procedural analyses, loop transformations, and code generation. AMD also provides highly optimized libraries, which extract the optimal performance from each x86 processor core when utilized. The AOCC Compiler Suite simplifies and accelerates development and tuning for x86 applications. * Added unit tests for detection and flags for AOCC * Addressed reviewers comments w.r.t version checks and url,checksum related line lengths Co-authored-by: Test User <spack@example.com>
2020-10-10make py-pillow the default for pil (#19251)Andrew Gaspar1-1/+1
py-pillow-simd is not portable to other architectures.
2020-10-01Add yacc provider and add dependency to swig (#19087)Andrew Gaspar1-1/+1
* Add byacc dependency to swig when building an autoconf version * Add yacc provider Removed extra sycl provider default
2020-09-25refactor install_tree to use projections format (#18341)Greg Becker1-5/+4
* refactor install_tree to use projections format * Add update method for config.yaml * add test for config update config
2020-09-03Pillow-SIMD: use as default PIL provider (#18097)Adam J. Stewart1-1/+1
* Pillow-SIMD: use as default PIL provider * Fix concretization of pil * Fix build of older versions of pillow
2020-08-10Update packages.yaml format and support configuration updatesMassimiliano Culpo1-5/+8
The YAML config for paths and modules of external packages has changed: the new format allows a single spec to load multiple modules. Spack will automatically convert from the old format when reading the configs (the updates do not add new essential properties, so this change in Spack is backwards-compatible). With this update, Spack cannot modify existing configs/environments without updating them (e.g. “spack config add” will fail if the configuration is in a format that predates this PR). The user is prompted to do this explicitly and commands are provided. All config scopes can be updated at once. Each environment must be updated one at a time.
2020-07-23Revert "Add libglvnd packages/Add EGL support (#14572)" (#17682)Chuck Atkins1-6/+2
This reverts commit 573489db710c6fd315170a45d6c609db2e30e5e4.
2020-07-13Add libglvnd packages/Add EGL support (#14572)Omar Padron1-2/+6
* add new package: "libglvnd-frontend" * add +glvnd variant to opengl package * add +glvnd variant to mesa package * add +egl variant to paraview package * add libglvnd-frontend entries to default packages config * fix style * add default providers for glvnd virtuals add default providers for glvnd-gl, glvnd-glx, and glvnd-egl * WIP: rough start to external OpenGL documentation * rename libglvnd-frontend package and backend virtual dependencies * update documentation * fix ligvnd-be-* typos * fix libglvnd-fe package class name * fix doc parse error