Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 531b1c5c3dcc9bc7bec27e223608aed477e94dbd.
|
|
spack (#29518)
|
|
* lower priority of package-provided urls
This change favors urls found in a scraped page over those provided by
the package from `url_for_version`. In most cases this doesn't matter,
but R specifically returns known bad URLs in some cases, and the
fallback path for a failed fetch uses `fetch_remote_versions` to find a
substitute. This fixes that problem.
fixes #29204
* consider what links actually exist in all cases
Checksum was only actually scraping when called with no versions. It
now always scrapes and then selects URLs from the set of URLs known to
exist whenever possible.
fixes #25831
* bow to the wrath of flake8
* test-fetch urls from package, prefer if successful
* Update lib/spack/spack/package.py
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* reword as suggested
* re-enable mypy specific ignore and ignore pyflakes
* remove flake8 ignore from .flake8
* address review comments
* address comments
* add sneaky missing substitute
I missed this one because we call substitute on a URL that doesn't
contain a version component. I'm not sure how that's supposed to work,
but apparently it's required by at least one mock package, so back in it
goes.
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
|
|
Adds `spack external read-cray-manifest`, which reads a json file that describes a set of package DAGs. The parsed results are stored directly in the database. A user can see these installed specs with `spack find` (like any installed spec). The easiest way to use them right now as dependencies is to run `spack spec ... ^/hash-of-external-package`.
Changes include:
* `spack external read-cray-manifest --file <path/to/file>` will add all specs described in the file to Spack's installation DB and will also install described compilers to the compilers configuration (the expected format of the file is described in this PR as well including examples of the file)
* Database records now may include an "origin" (the command added in this PR registers the origin as "external-db"). In the future, it is assumed users may want to be able to treat installs registered with this command differently (e.g. they may want to uninstall all specs added with this command)
* Hash properties are now always preserved when copying specs if the source spec is concrete
* I don't think the hashes of installed-and-concrete specs should change and this was the easiest way to handle that
* also specs that are concrete preserve their `.normal` property when copied (external specs may mention compilers that are not registered, and without this change they would fail in `normalize` when calling `validate_or_raise`)
* it might be this should only be the case if the spec was installed
- [x] Improve testing
- [x] Specifically mark DB records added with this command (so that users can do something like "uninstall all packages added with `spack read-external-db`)
* This is now possible with `spack uninstall --all --origin=external-db` (this will remove all specs added from manifest files)
- [x] Strip variants that are listed in json entries but don't actually exist for the package
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
|
|
|
|
This PR removes a few outdated sections from the "Basics" part of the
documentation. It also makes a few topic under the environment section
more prominent by removing an unneeded spack.yaml subsection and
promoting everything under it.
|
|
|
|
|
|
Broaden support for execution of the test suite
on Windows.
General bug and review fixups
|
|
Consistency is restored on next transaction
|
|
|
|
Consolidate Spack's internal filepath logic to a select
few places and refactor to consistent internal useage of
os.path utilities. Creates a prefix, and a series of utilities
in the path utility module that facilitate handling paths
in a platform agnostic manner.
Convert Windows paths to posix paths internally
Prefer posixpath.join instead of os.path.join
Updated util/ directory to account for Windows integration
Co-authored-by: Stephen Crowell <stephen.crowell@khq.kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
Module template format for windows (#23041)
|
|
* Incorporate new search location
* Add external user option
* proper doc string
* Explicit commands in getting started
* raise during chgrp on Win
recover installer changes
Notate admin privleges
Windows phase install hooks
Find external python and install ninja (#23496)
Allow external find python to find windows python and spack install ninja
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
|
|
Fixup common tests
* Remove requirement for Python 2.6
* Skip new failing test
Windows: Update url util to handle Windows paths (#27959)
* update url util to handle windows paths
* Update tests to handle fixed url handling
* canonicalize path only when the path type matches the host platform
* Skip some url tests on Windows
Co-authored-by: Omar Padron <omar.padron@kitware.com>
Use threading.TIMEOUT_MAX when available (#24246)
This value was introduced in Python 3.2. Specifying a timeout greater than
this value will raise an OverflowError.
Co-authored-by: Lou Lawrence <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
|
|
Add compiler hint to the root spec for Windows
Reporters on Windows (#26038)
Reporters use Jinja2 as the templating engine, and Jinja2 indexes
templates by Unix separators, even on Windows, so search using Unix paths
on all systems.
Support patching on win via git (#25871)
Handle GRP on windows
|
|
CMake - Windows Bootstrap (#25825)
Remove hardcoded cmake compiler (#26410)
Revert breaking cmake changes
Ensure no autotools on Windows
Perl on Windows (#26612)
Python source build windows (#26313)
Reconfigure sysconf for Windows
Python2.6 compatibility
Fxixup new sbang tests for windows
Ruby support (#28287)
Add NASM support (#28319)
Add mock Ninja package for testing
|
|
Relocate spack_cmd and scripts from installer
to root bin
Refactor documentation, installer, and launcher
to facilitate that change
|
|
* Style fixes
* Use Python's zipfile, if available
The compression libs are optional in Python. Rely on python as a
first attempt then fall back to `unzip`
|
|
Fix: Building packages with CMake is broken (#24241)
vsInstallPaths needs to be renamed vs_install_paths (#24297)
|
|
MSVC's internal CMake and Ninja now detected by spack external find and added to packages.yaml
Saving progress on packaging zlib for Windows
Fixing the shared CMake flag
* Loading Intel's ifx Fortran compiler into MSVC; if there are multiple
versions of MSVC installed and detected, ifx will only be placed into
the first block written in compilers.yaml. The version number of ifx can
be detected using MSVC's version flag (instead of /QV) by using
ignore_version_errors. This commit also provides support for detection
of Intel compilers in their own compiler block by adding ifx.exe to the
fc/f77_name blocks inside intel.py
* Giving CMake a Fortran compiler argument
* Adding patch file for removing duplicated mangling header for versions 3.9.1 and older; static and shared now successfully building on Windows
* Have netlib-lapack depend on ninja@1.10
Co-authored-by: John R. Cary <cary@txcorp.com>
Co-authored-by: Jared Popelar <jpopelar@txcorp.com>
Making a default config.yaml for Windows
Small path length for build_stage
Provide more prerequisite details, mention default config.yaml
Killing an unnecessary setvars call
Replacing some lost changes, proofreading, updating windows-supported package list
Co-authored-by: John Parent <john.parent@kitware.com>
|
|
* Add 'make-installer' command for Windows
* Add '--bat' arg to env activate, env deactivate and unload commands
* An equivalent script to setup-env on linux: spack_cmd.bat. This script
has a wrapper to evaluate cd, load/unload, env activate/deactivate.(#21734)
* Add spacktivate and config editor (#22049)
* spack_cmd: will find python and spack on its own. It preferentially
tries to use python on your PATH (#22414)
* Ignore Windows python installer if found (#23134)
* Bundle git in windows installer (#23597)
* Add Windows section to Getting Started document
(#23131), (#23295), (#24240)
Co-authored-by: Stephen Crowell <stephen.crowell@kitware.com>
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
Co-authored-by: Jared Popelar <jpopelar@txcorp.com>
Co-authored-by: Ben Cowan <benc@txcorp.com>
Update Installer CI
Co-authored-by: John Parent <john.parent@kitware.com>
|
|
Made the vcvars batch script location a member variable of the msvc compiler subclass, initialized from the compiler executable path. Added a setup_custom_environment() method to the msvc subclass that sources the vcvars script, dumps the environment, and copies the relevant environment variables to the Spack environment. Added class variables to the Windows OS and MSVC compiler subclasses to enable finding the compiler executables and determining their versions.
|
|
* On windows, write to StringIO without redirection in test cases to avoid conflicting with logger
|
|
* Fixed path and uid issues.
* Added needed import statement; kluged .exe extension.
* Got package to build. Some manual intervention necessary, including sourcing the MSVC setup script and having certain configuration parameters.
* Removed CMake executable suffix hack.
|
|
Co-authored-by: Lou Lawrence <lou.lawrence@kitware.com>
|
|
To provide Windows-compatible functionality, spack code should use
llnl.util.symlink instead of os.symlink. On non-Windows platforms
and on Windows where supported, os.symlink will still be used.
Use junctions when symlinks aren't supported on Windows (#22583)
Support islink for junctions (#24182)
Windows: Update llnl/util/filesystem
* Use '/' as path separator on Windows.
* Recognizing that Windows paths start with '<Letter>:/' instead of '/'
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
|
|
os.rename() fails on Windows if file already exists.
Create getuid utility function (#21736)
On Windows, replace os.getuid with ctypes.windll.shell32.IsUserAnAdmin().
Tests: Use getuid util function
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
|
|
1. Forwarding sys.stdin, e.g. use input_multiprocess_fd,
gives an error on Windows. Skipping for now
3. subprocess_context needs to serialize for Windows, like it does
for Mac.
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
|
|
* Snapshot of some MSVC infrastructure added during experiments a while ago. Rebasing from spack/develop.
* Added platform and OS definitions for Windows.
* Updated Windows platform file to conform to new archspec use.
* Added Windows as a platform; introduced some debugging code.
* Added type annotations.
* Fixed copyright.
* Removed print statements.
* Ensure `spack arch` returns correctly on Windows (#21428)
* Correctly identify windows as 'windows-Windows10-AMD64'
|
|
`stat`'ing a file in the dst dir is the wrong thing to do, you should
`lstat` to capture broken symlinks.
|
|
Re-work the checks and comparisons around commit versions, when no
commit version is involved the overhead is now in the noise, where one
is the overhead is now constant rather than linear.
|
|
|
|
|
|
fixes #29446
The new setup_*_environment functions have been falling back
to calling the old functions and warn the user since #11115.
This commit removes the fallback behavior and any use of:
- setup_environment
- setup_dependent_environment
in the codebase
|
|
Emulates `env -0` in a posix compliant way, avoiding a slow python process, speeds up setting up the build env when modules should load.
|
|
|
|
Change the internal representation of `Spec` to allow for multiple dependencies or
dependents stemming from the same package. This change permits to represent cases
which are frequent in cross compiled environments or to bootstrap compilers.
Modifications:
- [x] Substitute `DependencyMap` with `_EdgeMap`. The main differences are that the
latter does not support direct item assignment and can be modified only through its
API. It also provides a `select_by` method to query items.
- [x] Reworked a few public APIs of `Spec` to get list of dependencies or related edges.
- [x] Added unit tests to prevent regression on #11983 and prove the synthetic construction
of specs with multiple deps from the same package.
Since #22845 went in first, this PR reuses that format and thus it should not change hashes.
The same package may be present multiple times in the list of dependencies with different
associated specs (each with its own hash).
|
|
* environment.py: allow link:run
Some users want minimal views, excluding run-type dependencies, since
those type of dependencies are covered by rpaths and the symlinked
libraries in the view aren't used anyways.
With this change, an environment like this:
```
spack:
specs: ['py-flake8']
view:
default:
root: view
link: run
```
includes python packages and python, but no link type deps of python.
|
|
|
|
|
|
|
|
Speeds up comparison on `Version` by ~2.5x, e.g.
```python
In [1]: v = spack.version.Version('1.0.0'); w = spack.version.Version('1.0.2')
In [2]: %timeit v < w
1.47 µs ± 5.59 ns per loop (mean ± std. dev. of 7 runs, 1000000 loops each)
535 ns ± 1.75 ns per loop (mean ± std. dev. of 7 runs, 1000000 loops each)
```
|
|
Since adding the `spack --bootstrap` argument we don't need `spack find --bootstrap`
anymore. Deprecate it.
|
|
|
|
|
|
fixes #29203
This PR fixes a subtle bug we have when importing
Spack packages as Python modules that can lead to
multiple module objects being created for the same
package.
It also fixes all the places in unit-tests where
"relying" on the old bug was crucial to have a new
"clean" state of the package class.
|
|
This commit reverts the GCS fetch strategy to before commit:
d7596125231e800ca41c60e379be2b8abb47d20d
The previous commit added some s3 syntax to handle connections, but
added them into the GCS fetch strategy in a way that prevents GCS from
working anymore.
|
|
* rocmcc compiler: initial commit based on aocc and clang
Co-authored-by: luker <luke.roskop@hpe.com>
Co-authored-by: Tom Scogland <scogland1@llnl.gov>
|
|
The status displayed in the terminal title could be wrong when doing
distributed builds. For instance, doing `spack install glib` in two
different terminals could lead to the current package being reported as
`40/29` due to the way Spack handles retrying locks.
Work around this by keeping track of the package IDs that were already
encountered to avoid counting packages twice.
|
|
|