| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- This was needed when we transitioned to all lowercase packages because
git didn't handle case changes well on case-insensitive filesystems.
- Now it just adds extra stat calls to startup, and we check for
all-lowercase package names in tests, so we'll remove it.
- people using really old versions of Spack can re-clone.
|
|
* Create unload_module method
Extract code from load_module into unload_module.
* Unload modules to create a clean env on Cray
removes cray-libsci, cray-mpich and darshan to prevent any silent
linking with those packages.
|
|
|
|
|
|
* Add format to separate target and os for path
spec format can now handle separations of target and os for setting
up the path.
* Added ${PLATFORM} et al to spec.format()
${PLATFORM}, ${OS}, ${TARGET}
* Update tests
Updated tests and got rid of unnecessary code.
* Also update documentation to reflect this new ability.
* Add default path scheme to config.yaml
Added default path scheme to config.yaml. Users can overwrite this
section if they want.
|
|
* Speedup the default 'libs' property search - important for external
packages.
* As advised by @alalazo, use tuples instead of lists inside
_libs_default_handler.
|
|
* Fix error raising during install with Python 3
* Fix env_path too
|
|
* Added installation date and time to the database
Information on the date and time of installation of a spec is recorded
into the database. The information is retained on reindexing.
* Expose the possibility to query for installation date
The DB can now be queried for specs that have been installed in a given
time window. This query possibility is exposed to command line via two
new options of the `find` command.
* Extended docstring for Database._add
* Use timestamps since the epoch instead of formatted date in the DB
* Allow 'pretty date' formats from command line
* Substituted kwargs with explicit arguments
* Simplified regex for pretty date strings. Added unit tests.
|
|
fixes #7543
This is very likely an hot-fix, while a more permanent solution is
needed. See this comment for more insight:
https://github.com/spack/spack/pull/7193#discussion_r176448831
on the problem.
|
|
This updates architecture concretization to
* Search for the nearest parent in the DAG for architecture information
rather than defaulting to the root of the DAG
* Propagate architecture settings transitively, such that if for
example the target is set at the root of the dag it will set the
same target on indirect dependencies (assuming no intermediate
dependency specifies a separate target). Previously this occurred
in general but under some conditions did not, for example if an
intermediate dependency specified some subset of architecture
properties.
|
|
* Create mirror for system with different compilers
Spack concretizes the spec provided by the user in
"spack mirror create" to ensure downloading the right
dependencies. Under normal circumstances concretization
requires that the chosen compiler exists on the system,
but this is not required when creating download mirrors
for other systems, so this requirement is removed in that
case.
* Add test for disabling compiler existence check
* Update compiler existence checking logic
* improve test for disabling compiler existence check
|
|
|
|
* make py-setuptools a run-time-only dep for py-basemap and patch python package to only apply setuptools flag for build deps
* py-qtconsole does not require setuptools
|
|
* This allows Spack to work with MD5 hashes on machines with openssl in FIPS mode.
* We are still using MD5 for validation in many places, and a later PR will replace all uses of MD5 with SHA256.
* This is a quick fix until that happens.
|
|
|
|
This hash includes the content of the package itself as well as the DAG
for the package.
|
|
This calculates a hash which depends on the complete content of the
package including sources and the associated `package.py` file.
|
|
This helps to ensure that patches are applied consistently and will also
be used as the source for the patch part of full package hashes.
|
|
This will be included in the full hash of packages.
|
|
These attributes are ignored when doing a content hash of a package.
|
|
This will be included in the full hash of packages.
|
|
- transitive dependencies were not being handled correctly
- restructure code to do recursion and mark visited packages properly
- add `-V` option to *not* expand virtuals in spack dependencies
|
|
fixes #7239
|
|
This re-adds the option to create and install unsigned tarballs, now
with the -u option (--unsigned) rather than the -y option.
This also changes the "keys" command, replacing the -y/--yes-to-all
option with the -t/--trust option (which has the same effect but is
more-clearly named).
|
|
Fixes #7130
shutil.move expects a source path like "/x/y/" to be a directory and
fails if "/x/y" is a symlink. This invokes realpath on the source
path to avoid the issue.
|
|
Fixes #7356
In some cases OperatingSystem (e.g. LinuxDistro) was getting
instantiated with a version that contains dashes. This breaks because
the concretizer later converts this value to a string and re-parses
it, and the '-' character is used to separate architecture components.
This adds a guard in the initializer to convert '-' to '_'.
|
|
CudaPackage is always used as a mixin. As such it should inherit from
PackageBase, and not Package.
|
|
Fixes #7237
Fixes #6404
Fixes #6418
Fixes #6369
Identify when binary relocation fails to remove all instances of the
source prefix (and report an error to the user unless they specify
-a to allow the old root to appear). This check occurs at two stages:
during "bincache create" all instances of the root are replaced with
a special placeholder string ("@@@@..."), and a failure occurs if the
root is detected at this point; when the binary package is extracted
there is a second check. This addresses #7237 and #6418.
This is intended to be compatible with previously-created binary
packages.
This also adds:
* Better error messages for "spack install --use-cache" (#6404)
* Faster relocation on Mac OS (using a single call to
install_name_tool for all files rather than a call for each file)
* Clean up when "buildcache create" fails (addresses #6369)
* Explicit error message when the spack instance extracting the binary
package uses a different install layout than the spack instance that
created the binary package (since this is currently not supported)
* Remove the option to create unsigned binary packages with -y
|
|
This updates Cray.setup_platform_environment to use cray-specific
pkgconfig paths so that all providers of 'pkgconfig' have access
to them (previously the 'pkg-config' provider had this but the
'pkgconf' provider did not).
|
|
|
|
(#7277)
* [SPACK/spec.py] When a query through ForwardQueryToPackage returns
'None', treat that as query failure and raise RuntimeError with
suitable message. This overrides the current behavior to raise an
AttributeError which is now triggered only when no suitable query
property is found and there is no default handler.
* [spack/spec.py] Fix style.
* [SPACK/spec.py] In case of query failure, i.e. property returning
'None', raise AttributeError instead of RuntimeError in order to
pass the unit test. Also, small update in the logic distinguishing
query failure and lack of relevant property/attribute handling.
|
|
AutoTools -> Autotools
|
|
* add docker-based development resources
* incorporate feedback from @ax3l
* fix docs/improve ssh handling
* experiment with custom prompt
* add arch/fix missing core_compilers key
* add centos/minor tweaks
* make prompt experiment optional
* workaround problem with latest fedora docker image
* add docker documentation page to index toc
* try another documentation fix
* switch arch linux base to base/archlinux
* update the git urls in the Dockerfiles
* add opensuse
* switch CUSTOM_PROMPT variable to simply "PROMPT"
|
|
Later versions of Sphinx fail due to possible clashes with our custom
argparse.
|
|
This updates the fix_darwin_install_name function to use the Spack
Executable object to run install_name_tool, which ensures that
process output is formatted as a 'str' for python2 and python3.
Originally fix_darwin_install_name was invoking subprocess.Popen
directly.
|
|
Fixes #5189
When working with non-normalized paths containing ".." on some
file systems, Spack was found to encounter a permission error when
writing to the path. This normalizes a path written by the
intel-parallel-studio package and also normalizes all paths
written by the license install hook (for all packages) to avoid
this issue for intel-parallel-studio.
|
|
Following the discussion with Todd and Adam, find has been modified to
accept glob expressions. This should not affect performance as every
glob implementation I inspected has 3 cases (no wildcard, wildcard but
no directories involved, wildcard and directories involved) and uses
fnmatch underneath.
Mixins have been changed to do by default a non-recursive search (but
a recursive search can still be triggered using the recursive keyword).
|
|
Following a comment from Todd, the search path for the files listed in
`filter_compiler_wrappers` can now be narrowed. Anyhow, the function
implementation still makes use of `find`, the rationale being that we
have already seen packages that install artifacts in e.g. architecture
dependent folders. The possibility to have a relative search path might
be a good compromise between the previous approach and the one suggested
in the review.
Also: 'ignore_absent' and 'backup' keyword arguments can be optionally
forwarded to `filter_file`.
|
|
Following comments from Todd:
- the call to tty.debug has been moved deeper, to log the filtering of each file
- the shadowing on the name "kwargs" is avoided
|
|
|
|
Implemented a declarative syntax for the additional behavior that can
get attached to classes. Implemented a function to filter compiler
wrappers that uses the mechanism above.
|
|
|
|
Modifications:
* added a mixin to filter compiler wrappers from files
* modified hdf5, openmpi, mpich, mvapich2 to use it
|
|
- command reference now includes usage for all Spack commands as output
by `spack help`. Each command usage links to any related section in
the docs.
- added `spack commands` command which can list command names,
subcommands, and generate RST docs for commands.
- added `llnl.util.argparsewriter`, which analyzes an argparse parser and
calls hooks for description, usage, options, and subcommands
|
|
- Shorten Spack command usage for short options. Short options are now
shown as [-abc] instead of as [-a] [-b] [-c]
- fix bug that mixed long and short options for top-level `spack help`
|
|
|
|
|
|
- Add proper help for `spack buildcache` subcommands
- Reorganize the help categories of Spack commands so that buildcache is
in packaging and diy and setup are now in build.
|
|
- previously commands with this argument showed a long list of choices
that were platform specific.
- use a better metavar: {defaults,system,site,user}[/PLATFORM]
|
|
* Change location of public key in basic tutorial
* Change tuturial version number to 11.2
|
