Age | Commit message (Collapse) | Author | Files | Lines |
|
This PR implements the concept of "default environment", which doesn't have to be
created explicitly. The aim is to lower the barrier for adopting environments.
To (create and) activate the default environment, run
```
$ spack env activate
```
This mimics the behavior of
```
$ cd
```
which brings you to your home directory.
This is not a breaking change, since `spack env activate` without arguments
currently errors. It is similar to the already existing `spack env activate --temp`
command which always creates an env in a temporary directory, the difference
is that the default environment is a managed / named environment named `default`.
The name `default` is not a reserved name, it's just that `spack env activate`
creates it for you if you don't have it already.
With this change, you can get started with environments faster:
```
$ spack env activate [--prompt]
$ spack install --add x y z
```
instead of
```
$ spack env create default
==> Created environment 'default in /Users/harmenstoppels/spack/var/spack/environments/default
==> You can activate this environment with:
==> spack env activate default
$ spack env activate [--prompt] default
$ spack install --add x y z
```
Notice that Spack supports switching (but not stacking) environments, so the
parallel with `cd` is pretty clear:
```
$ spack env activate named_env
$ spack env status
==> In environment named_env
$ spack env activate
$ spack env status
==> In environment default
```
|
|
* Add command suggestions
This adds suggestions of similar commands in case users mistype a
command. Before:
```
$ spack spack
==> Error: spack is not a recognized Spack command or extension command; check with `spack commands`.
```
After:
```
$ spack spack
==> Error: spack is not a recognized Spack command or extension command; check with `spack commands`.
Did you mean one of the following commands?
spec
patch
```
* Add package name suggestions
* Remove suggestion to run spack clean -m
|
|
|
|
This PR adds support for including separate definitions from `spack.yaml`.
Supporting the inclusion of files with definitions enables user to make
curated/standardized collections of packages that can re-used by others.
|
|
Currently module globals aren't set before running
`setup_[dependent_]run_environment` to compute environment modifications
for module files. This commit fixes that.
|
|
Looking at the memory profiles of concurrent solves
for environment with unify:false, it seems memory
is only ramping up.
This exchange in the potassco mailing list:
https://sourceforge.net/p/potassco/mailman/potassco-users/thread/b55b5b8c2e8945409abb3fa3c935c27e%40lohn.at/#msg36517698
Seems to suggest that clingo doesn't release memory
until end of the application.
Since when unify:false we distribute work to processes,
here we give a maxtaskperchild=1, so we clean memory
after each solve.
|
|
Don't encourage use of default value if propagating a multivalued variant.
|
|
|
|
Some providers must provide virtuals "together", i.e.
if they provide one virtual of a set, they must be the
providers also of the others.
There was a bug though, where we were not checking if
the other virtuals in the set were needed at all in
the DAG.
This commit fixes the bug.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This PR makes it possible to select only a subset of virtual dependencies from a spec that _may_ provide more. To select providers, a syntax to specify edge attributes is introduced:
```
hdf5 ^[virtuals=mpi] mpich
```
With that syntax we can concretize specs like:
```console
$ spack spec strumpack ^[virtuals=mpi] intel-parallel-studio+mkl ^[virtuals=lapack] openblas
```
On `develop` this would currently fail with:
```console
$ spack spec strumpack ^intel-parallel-studio+mkl ^openblas
==> Error: Spec cannot include multiple providers for virtual 'blas'
Requested 'intel-parallel-studio' and 'openblas'
```
In package recipes, virtual specs that are declared in the same `provides` directive need to be provided _together_. This means that e.g. `openblas`, which has:
```python
provides("blas", "lapack")
```
needs to provide both `lapack` and `blas` when requested to provide at least one of them.
## Additional notes
This capability is needed to model compilers. Assuming that languages are treated like virtual dependencies, we might want e.g. to use LLVM to compile C/C++ and Gnu GCC to compile Fortran. This can be accomplished by the following[^1]:
```
hdf5 ^[virtuals=c,cxx] llvm ^[virtuals=fortran] gcc
```
[^1]: We plan to add some syntactic sugar around this syntax, and reuse the `%` sigil to avoid having a lot of boilerplate around compilers.
Modifications:
- [x] Add syntax to interact with edge attributes from spec literals
- [x] Add concretization logic to be able to cherry-pick virtual dependencies
- [x] Extend semantic of the `provides` directive to express when virtuals need to be provided together
- [x] Add unit-tests and documentation
|
|
|
|
Allowing white space around `:` in version ranges introduces an ambiguity:
```
a@1: b
```
parses as `a@1:b` but should really be parsed as two separate specs `a@1:` and `b`.
With white space disallowed around `:` in ranges, the ambiguity is resolved.
|
|
Call setup_dependent_run_environment on both link and run edges,
instead of only run edges, which restores old behavior.
Move setup_build_environment into get_env_modifications
Also call setup_run_environment on direct build deps, since their run
environment has to be set up.
|
|
* Revert "Improve build isolation in PythonPipBuilder (#40224)"
This reverts commit 0f43074f3e93d13445ea662a13f5672f960947c2.
* Revert "py-setuptools: sdist + rpath patch backport (#40205)"
This reverts commit 512e41a84aa794ec0cc53872aaa6c228c36e0b49.
|
|
|
|
* fix create/remove env with invalid spack.yaml
* fix isort error
* fix env ident unittests
* Fix pull request points
|
|
|
|
(#40789)
* Add tests to ensure variant propagation syntax can round-trip to/from string
* Add a regression test for the bug in 35298
* Reconstruct the spec constraints in the worker process
Specs do not preserve any information on propagation of variants
when round-tripping to/from JSON (which we use to pickle), but
preserve it when round-tripping to/from strings.
Therefore, we pass a spec literal to the worker and reconstruct
the Spec objects there.
|
|
|
|
|
|
- [x] Add links to information people are going to want to know when adding license
information to their packages (namely OSI licenses and SPDX identifiers).
- [x] Update the packaging docs for `license()` with Spack as an example for `when=`.
After all, it's a dual-licensed package that changed once in the past.
- [x] Add link to https://spdx.org/licenses/ in the `spack create` boilerplate as well.
|
|
Bumps [black](https://github.com/psf/black) from 23.9.1 to 23.10.1.
- [Release notes](https://github.com/psf/black/releases)
- [Changelog](https://github.com/psf/black/blob/main/CHANGES.md)
- [Commits](https://github.com/psf/black/compare/23.9.1...23.10.1)
---
updated-dependencies:
- dependency-name: black
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
|
|
|
|
Convince the language server it's really just a BinaryCacheIndex,
otherwise it defaults to thinking it's Singleton, and can't autocomplete
etc.
|
|
The code should be functonally equivalent to what it was before,
but now to avoid cycles by design we are using a "hidden"
feature of clingo
|
|
Typically MSVC is detected via the VSWhere program. However, this may
not be available, or may be installed in an unpredictable location.
This PR adds an additional approach via Windows Registry queries to
determine VS install location root.
Additionally:
* Construct vs_install_paths after class-definition time (move it to
variable-access time).
* Skip over keys for which a user does not have read permissions
when performing searches (previously the presence of these keys
would have caused an error, regardless of whether they were
needed).
* Extend helper functionality with option for regex matching on
registry keys vs. exact string matching.
* Some internal refactoring: remove boolean parameters in some cases
where the function was always called with the same value
(e.g. `find_subkey`)
|
|
(#39850)
.bat or .exe files can be considered executable on Windows. This PR
expands the regex for detectable packages to allow for the detection
of packages that vendor .bat wrappers (intel mpi for example).
Additional changes:
* Outside of Windows, when searching for executables `path_hints=None`
was used to indicate that default path hints should be provided,
and `[]` was taken to mean that no defaults should be chosen
(in that case, nothing is searched); behavior on Windows has
now been updated to match.
* Above logic for handling of `path_hints=[]` has also been extended
to library search (for both Linux and Windows).
* All exceptions for external packages were documented as timeout
errors: this commit adds a distinction for other types of errors
in warning messages to the user.
|
|
Credits to @ChristianKniep for advocating the idea of OCI image layers
being identical to spack buildcache tarballs.
With this you can configure an OCI registry as a buildcache:
```console
$ spack mirror add my_registry oci://user/image # Dockerhub
$ spack mirror add my_registry oci://ghcr.io/haampie/spack-test # GHCR
$ spack mirror set --push --oci-username ... --oci-password ... my_registry # set login credentials
```
which should result in this config:
```yaml
mirrors:
my_registry:
url: oci://ghcr.io/haampie/spack-test
push:
access_pair: [<username>, <password>]
```
It can be used like any other registry
```
spack buildcache push my_registry [specs...]
```
It will upload the Spack tarballs in parallel, as well as manifest + config
files s.t. the binaries are compatible with `docker pull` or `skopeo copy`.
In fact, a base image can be added to get a _runnable_ image:
```console
$ spack buildcache push --base-image ubuntu:23.04 my_registry python
Pushed ... as [image]:python-3.11.2-65txfcpqbmpawclvtasuog4yzmxwaoia.spack
$ docker run --rm -it [image]:python-3.11.2-65txfcpqbmpawclvtasuog4yzmxwaoia.spack
```
which should really be a game changer for sharing binaries.
Further, all content-addressable blobs that are downloaded and verified
will be cached in Spack's download cache. This should make repeated
`push` commands faster, as well as `push` followed by a separate
`update-index` command.
An end to end example of how to use this in Github Actions is here:
**https://github.com/haampie/spack-oci-buildcache-example**
TODO:
- [x] Generate environment modifications in config so PATH is set up
- [x] Enrich config with Spack's `spec` json (this is allowed in the OCI specification)
- [x] When ^ is done, add logic to create an index in say `<image>:index` by fetching all config files (using OCI distribution discovery API)
- [x] Add logic to use object storage in an OCI registry in `spack install`.
- [x] Make the user pick the base image for generated OCI images.
- [x] Update buildcache install logic to deal with absolute paths in tarballs
- [x] Merge with `spack buildcache` command
- [x] Merge #37441 (included here)
- [x] Merge #39077 (included here)
- [x] #39187 + #39285
- [x] #39341
- [x] Not a blocker: #35737 fixes correctness run env for the generated container images
NOTE:
1. `oci://` is unfortunately taken, so it's being abused in this PR to mean "oci type mirror". `skopeo` uses `docker://` which I'd like to avoid, given that classical docker v1 registries are not supported.
2. this is currently `https`-only, given that basic auth is used to login. I _could_ be convinced to allow http, but I'd prefer not to, given that for a `spack buildcache push` command multiple domains can be involved (auth server, source of base image, destination registry). Right now, no urllib http handler is added, so redirects to https and auth servers with http urls will simply result in a hard failure.
CAVEATS:
1. Signing is not implemented in this PR. `gpg --clearsign` is not the nicest solution, since (a) the spec.json is merged into the image config, which must be valid json, and (b) it would be better to sign the manifest (referencing both config/spec file and tarball) using more conventional image signing tools
2. `spack.binary_distribution.push` is not yet implemented for the OCI buildcache, only `spack buildcache push` is. This is because I'd like to always push images + deps to the registry, so that it's `docker pull`-able, whereas in `spack ci` we really wanna push an individual package without its deps to say `pr-xyz`, while its deps reside in some `develop` buildcache.
3. The `push -j ...` flag only works for OCI buildcache, not for others
|
|
|
|
* spack checksum pkg@1.2, use as version filter
Currently pkg@1.2 splits on @ and looks for 1.2 specifically, with this
PR pkg@1.2 is a filter so any matching 1.2, 1.2.1, ..., 1.2.10 version
is displayed.
* fix tests
* fix style
|
|
Update Tcl modulefile template to simplify generated `append-path`,
`prepend-path` and `remove-path` commands and improve their readability.
If path element delimiter is colon character, do not set the `--delim`
option as it is the default delimiter value.
|
|
* PythonPackage: nested config_settings
* flake8
|
|
|
|
Renames exclude_implicits to hide_implicits
When hide_implicits option is enabled, generate modulefile of
implicitly installed software and hide them. Even if implicit, those
modulefiles may be referred as dependency in other modulefiles thus they
should be generated to make module properly load dependent module.
A new hidden property is added to BaseConfiguration class.
To hide modulefiles, modulercs are generated along modulefiles. Such rc
files contain specific module command to indicate a module should be
hidden (for instance when using "module avail").
A modulerc property is added to TclFileLayout and LmodFileLayout classes
to get fully qualified path name of the modulerc associated to a given
modulefile.
Modulerc files will be located in each module directory, next to the
version modulefiles. This scheme is supported by both module tool
implementations.
modulerc_header and hide_cmd_format attributes are added to
TclModulefileWriter and LmodModulefileWriter. They help to know how to
generate a modulerc file with hidden commands for each module tool.
Tcl modulerc file requires an header. As we use a command introduced on
Modules 4.7 (module-hide --hidden-loaded), a version requirement is
added to header string.
For lmod, modules that open up a hierarchy are never hidden, even if
they are implicitly installed.
Modulerc is created, updated or removed when associated modulefile is
written or removed. If an implicit modulefile becomes explicit, hidden
command in modulerc for this modulefile is removed. If modulerc becomes
empty, this file is removed. Modulerc file is not rewritten when no
content change is detected.
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
|
|
|
|
Previously, we only searched for `patch` inside of whatever Git
installation was available because the most common installation of Git
available on Windows had `patch`. That's not true for all possible
installations of Git though, so this updates the search to also check
PATH.
|
|
GitLab's .patch URLs only provide abbreviated hashes, while .diff URLs
provide full hashes. There does not seem to be a parameter to force
.patch URLs to also return full hashes, so we should make sure to use
the .diff ones.
|
|
|
|
(#40643)
|
|
* Docs: Add version range example to conditional dependencies
* Add when context manager example
|
|
when verbose (#40634)
|
|
With the introduction of multiple build dependencies from the same package in the DAG, we need to minimize a few weights accounting for edges rather than nodes. If we don't do that we might have multiple "optimal" solutions that differ only in how the same nodes are connected together. This commit ensures optimal versions are picked per parent in case of multiple choices for a dependency.
|
|
Fix the following syntax which validates only the first array entry:
```python
"compilers": {
"type": "array",
"items": [
{
"type": ...
}
]
}
```
to
```python
"compilers": {
"type": "array",
"items": {
"type": ...
}
}
```
which validates the entire array.
Oops...
|