Age | Commit message (Collapse) | Author | Files | Lines |
|
Add support for conflict directives in Lua modulefile like done for Tcl
modulefile.
Note that conflicts are correctly honored on Lmod and Environment
Modules <4.2 only if mutually expressed on both modulefiles that
conflict with each other.
Migrate conflict code from Tcl-specific classes to the common part. Add
tests for Lmod and split the conflict test case in two.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
|
|
|
|
* When using system tools to unpack a .gz file, the input file needs a
different name than the output file. Normally, we generate this new
name by stripping off the .gz extension off of the file name.
This was not sufficient if the file name did not have an extension,
so we temporarily rename the file in that case.
* When using system tar utility to untar on Windows, we were (erroneously)
skipping the actual untar step if the filename was lacking a .tar
extension
* For foo.txz, we were not changing the extension of the decompressed file
(i.e. we would decompress foo.txz to foo.txz). This did not cause any
problems, but is confusing, so has been updated such that the output
filename reflects its decompressed state (i.e. foo.tar).
* Added test for strip_compression_extension
* Update test_native_unpacking to test each archive type with and without
an extension as part of the file name (i.e. we test "foo.tar.gz", but
also make sure we decompress properly if it is named "foo").
|
|
`Stage(keep=True)` was ignored when put in a composite that doesn't
override the value.
|
|
Running `spack test run <python package>` resulted in the error
```
'str' object is not callable
```
because the python executable was not set correctly.
|
|
(#33495)
Lock objects can now be instantiated independently,
without being tied to the global configuration. The
same is true for database and store objects.
The database __init__ method has been simplified to
take a single lock configuration object. Some common
lock configurations (e.g. NO_LOCK or NO_TIMEOUT) have
been named and are provided as globals.
The use_store context manager keeps the configuration
consistent by pushing and popping an internal scope.
It can also be tuned by passing extra data to set up
e.g. upstreams or anything else that might be related
to the store.
|
|
|
|
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
|
|
* Minimal cleanup of a few tests in packaging.py
* Use f-strings
|
|
|
|
|
|
option (#38248)
* Bugfix: spack.yaml concretizer:unify needs to be read and used
* Optional: add environment test to ensure configuration scheme is used
* Activate environment in unit tests
A more proper solution would be to keep
an environment instance configuration as
an attribute, but that is a bigger refactor
* Delay evaluation of Environment.unify
* Slightly simplify unit tests
---------
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
|
|
|
|
Allow the following formats:
```yaml
mirrors:
name: <url>
```
```yaml
mirrors:
name:
url: s3://xyz
access_pair: [x, y]
```
```yaml
mirrors:
name:
fetch: http://xyz
push:
url: s3://xyz
access_pair: [x, y]
```
And reserve two new properties to indicate the mirror type (e.g.
mirror.spack.io is a source mirror, not a binary cache)
```yaml
mirrors:
spack-public:
source: true
binary: false
url: https://mirror.spack.io
```
|
|
A few packages have version directives evaluated
within if statements, conditional on the value of
`platform.platform()`.
Sometimes there are no cases for e.g. platform=darwin and that
causes a lot of spurious failures with version existence
audits.
This PR allows expressing conditions to skip version
existence checks in audits and avoid these spurious reports.
|
|
|
|
|
|
### Rationale
While working on #29549, I noticed a lot of inconsistencies in our argparse help messages. This is important for fish where these help messages end up as descriptions in the tab completion menu. See https://github.com/spack/spack/pull/29549#issuecomment-1627596477 for some examples of longer or more stylized help messages.
### Implementation
This PR makes the following changes:
- [x] help messages start with a lowercase letter.
- [x] Help messages do not end with a period
- [x] the first line of a help message is short and simple
longer text is separated by an empty line
- [x] "help messages do not use triple quotes"
"""(except docstrings)"""
- [x] Parentheses not needed for string concatenation inside function call
- [x] Remove "..." "..." string concatenation leftover from black reformatting
- [x] Remove Sphinx argument docs from help messages
The first 2 choices aren't very controversial, and are designed to match the syntax of the `--help` flag automatically added by argparse. The 3rd choice is more up for debate, and is designed to match our package/module docstrings. The 4th choice is designed to avoid excessive newline characters and indentation. We may actually want to go even further and disallow docstrings altogether.
### Alternatives
Choice 3 in particular has a lot of alternatives. My goal is solely to ensure that fish tab completion looks reasonable. Alternatives include:
1. Get rid of long help messages, only allow short simple messages
2. Move longer help messages to epilog
3. Separate by 2 newline characters instead of 1
4. Separate by period instead of newline. First sentence goes into tab completion description
The number of commands with long help text is actually rather small, and is mostly relegated to `spack ci` and `spack buildcache`. So 1 isn't actually as ridiculous as it sounds.
Let me know if there are any other standardizations or alternatives you would like to suggest.
|
|
|
|
|
|
Co-authored-by: eugeneswalker <eugenesunsetwalker@gmail.com>
|
|
Refactor `TermTitle` into `InstallStatus` and use it to show progress
information both in the terminal title as well as inline. This also
turns on the terminal title status by default.
The inline output will look like the following after this change:
```
==> Installing m4-1.4.19-w2fxrpuz64zdq63woprqfxxzc3tzu7p3 [4/4]
```
|
|
People frequently ask us how to pipe `spack find` output to other commands, and we tell
them to do things like this:
```console
$ spack find --format "/{hash}" | spack uninstall -ay
```
Sometimes users don't know about hash references and come up with potentially ambiguous
formulations like this:
```console
spack find --format {name}@{version}%{compiler} | spack uninstall -ay
```
Since this is a common enough thing to want to do, and to make it more obvious how, this
PR adds a `-H` / `--hashes` as a shortcut, so you can now just do:
```console
spack find -H | spack uninstall -ay
```
|
|
|
|
`"%s" % spec` formats the spec with deps included, which produces sometimes KBs
of data and is slow to run in pure Python. It can delay otherwise very short-lived
read/write locks on the database.
Discovered in #38762 where profile output showed about 2 seconds is spent in
`spec.format`, which is significant overhead when using multiprocessing to install
from binary cache in parallel (installation often takes <5s for small packages). With
this change, `spec.format` no longer shows up in profile output.
(This line hasn't changed since Spack v0.9 ;p)
* move format() call to custom NoSuchSpecError exception
* add a comment saying why, so we can eventually change `Spec.__str__`
|
|
|
|
1. Fix O(n^2) iteration in `_get_overwrite_specs`
2. Early exit `get_by_hash` on full hash
3. Fix O(n^2) double lookup in `all_matching_specs` with hashes
4. Fix some legibility issues
|
|
fixes #38733
|
|
Signed-off-by: Andrey Parfenov <andrey.parfenov@intel.com>
|
|
|
|
|
|
(#38036)
* When installing a package Spack will attempt to set group permissions on
the install prefix even when the configuration does not specify a group.
Co-authored-by: David Gomez <dvdgomez@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
|
|
|
Move the logic checking which mirrors have the specs we need closer
to where that information is needed. Also update the staging summary
to contain a brief description of why we scheduled or pruned each
job. If a spec was found on any mirrors, regardless of whether
we scheduled a job for it, print those mirrors.
|
|
|
|
PowerShell requires explicit shell and env support in Spack.
This is due to the distinct differences in shell interactions between
cmd and pwsh. Add a doskey in pwsh piping 'spack' commands to a
powershell script similar to the sh function 'spack'. Add
support for PowerShell-specific shell interactions from Spack
(set/unset shell variables).
|
|
|
|
|
|
This reverts commit 66f75407d136c0c06ed01774d5815728afba35ca.
|
|
Fixed the cached CMake package so that the build_type field is saved
in the cached configuration file.
|
|
* Support hardlinks/junctions on Windows systems without developer
mode enabled
* Generally, use of llnl.util.symlink.symlink is preferred over
os.symlink since it handles this automatically
* Generally an error is now reported if a user attempts to create a
symlink to a file that does not exist (this was previously allowed
on Linux/Mac).
* One exception to this: when Spack installs files from the source
into their final prefix, dangling symlinks are allowed (on
Linux/Mac - Windows does not allow this in any circumstance).
The intent behind this is to avoid generating failures for
installations on Linux/Mac that were succeeding before.
* Because Windows is strict about forbidding dangling symlinks,
`traverse_tree` has been updated to skip creating symlinks if they
would point to a file that is ignored. This check is not
transitive (i.e., a symlink to a symlink to an ignored file would
not be caught appropriately)
* Relocate function: resolve_link_target_relative_to_the_link
(this is not otherwise modified)
Co-authored-by: jamessmillie <smillie@txcorp.com>
|
|
Update list of excluded variables in `from_sourcing_file` function to
cover all variables specific to Environment Modules or Lmod. Add
specifically variables relative to the definition of `module()`, `ml()`
and `_module_raw()` Bash functions.
Fixes #13504
|
|
Update `env.set` command and underlying `SetEnv` object to add the `raw`
boolean attribute. `raw` is optional and set to False by default. When
set to True, value format is skipped for object when generating
environment modifications.
With this change it is now possible to define environment variable
whose value contains variable reference syntax (like `{foo}` or `{}`)
that should be set as-is.
Fixes #29578
|
|
exclusive (#38533)
|
|
Spack flags supplied by users should supersede flags from package build systems and
other places in Spack. However, Spack currently adds user-supplied flags to the
beginning of the compile line, which means that in some cases build system flags will
supersede user-supplied ones.
The right place to add a flag to ensure it has highest precedence for the compiler really
depends on the type of flag. For example, search paths like `-L` and `-I` are examined
in order, so adding them first is highest precedence. Compilers take the *last* occurrence
of optimization flags like `-O2`, so those should be placed *after* other such flags. Shim
libraries with `-l` should go *before* other libraries on the command line, so we want
user-supplied libs to go first, etc.
`lib/spack/env/cc` already knows how to split arguments into categories like `libs_list`,
`rpath_dirs_list`, etc., so we can leverage that functionality to merge user flags into
the arg list correctly.
The general rules for injected flags are:
1. All `-L`, `-I`, `-isystem`, `-l`, and `*-rpath` flags from `spack_flags_*` to appear
before their regular counterparts.
2. All other flags ordered with the ones from flags after their regular counterparts,
i.e. `other_flags` before `spack_flags_other_flags`
- [x] Generalize argument categorization into its own function in the `cc` shell script
- [x] Apply the same splitting logic to injected flags and flags from the original compile line.
- [x] Use the resulting flag lists to merge user- and build-system-supplied flags by category.
- [x] Add tests.
Signed-off-by: Andrey Parfenov <andrey.parfenov@intel.com>
Co-authored-by: iermolae <igor.ermolaev@intel.com>
|
|
|