| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
copy to/from prefix. (#15003)
* Buildcache creation change the way prefix is copied to workdir.
* install_tree copies hardlinked files
* tarfile creates hardlinked files on extraction.
* create a temporary tarfile from prefix and extract it to workdir
* Use temp tarfile to move workdir to prefix to preserve hardlinks instead of copying
|
|
|
|
fixes #14927
|
|
exceptions. (#14929)
* Replace direct call to patchelf with get_existing_elf_rpaths which handles exceptions.
* Remove unused patchelf definition.
* Convert to set.
|
|
It's often useful to run a module with `python -m`, e.g.:
python -m pyinstrument script.py
Running a python script this way was hard, though, as `spack python` did
not have a similar `-m` option. This PR adds a `-m` option to `spack
python` so that we can do things like this:
spack python -m pyinstrument ./test.py
This makes it easy to write a script that uses a small part of Spack and
then profile it. Previously thee easiest way to do this was to write a
custom Spack command, which is often overkill.
|
|
- `git -C` doesn't work on git before 1.8.5
- `working_dir` gets us the same effect
|
|
Fixes #10019
If multiple instances of a package were installed in a single
instance of Spack, and they differed in terms of dependencies, then
"spack find" would not distinguish specs based on their dependencies.
For example if two instances of X were installed, one with Y and one
with Z, then "spack find X ^Y" would display both instances of X.
|
|
|
|
|
|
Using `sys.executable` to run Python in a sub-shell doesn't always work in a virtual environment as the `sys.executable` Python is not necessarily compatible with any loaded spack/other virtual environment.
- revert use of sys.executable to print out subshell environment (#14496)
- try instead to use an available python, then if there *is not* one, use `sys.executable`
- this addresses RHEL8 (where there is no `python` and `PYTHONHOME` issue in a simpler way
|
|
* Fix use of sys.executable for module/env commands
* Fix unit tests
* More consistent quotation, less duplication
* Fix import syntax
|
|
|
|
When removing packages from a view, extensions were being deactivated
in an arbitrary order. Extensions must be deactivated in preorder
traversal (dependents before dependencies), so when this order was
violated the view update would fail.
This commit ensures that views deactivate extensions based on a
preorder traversal and adds a test for it.
|
|
Despite trying very hard to keep dicts out of our hash algorithm, we seem
to still accidentally add them in ways that the tests can't catch. This
can cause errors when hashes are not computed deterministically.
This fixes an error we saw with Python 3.5, where dictionary iteration
order is random. In this instance, we saw a bug when reading Spack
environment lockfiles -- The load would fail like this:
```
...
File "/sw/spack/lib/spack/spack/environment.py", line 1249, in concretized_specs
yield (s, self.specs_by_hash[h])
KeyError: 'qcttqplkwgxzjlycbs4rfxxladnt423p'
```
This was because the hashes differed depending on whether we wrote `path`
or `module` first when recomputing the build hash as part of reading a
Spack lockfile. We can fix it by ensuring a determistic iteration order.
- [x] Fix two places (one that caused an issue, and one that did
not... yet) where our to_node_dict-like methods were using regular python
dicts.
- [x] Also add a check that statically analyzes our to_node_dict
functions and flags any that use Python dicts.
The test found the two errors fixed here, specifically:
```
E AssertionError: assert [] == ['Use syaml_dict instead of ...pack/spack/spec.py:1495:28']
E Right contains more items, first extra item: 'Use syaml_dict instead of dict at /Users/gamblin2/src/spack/lib/spack/spack/spec.py:1495:28'
E Full diff:
E - []
E + ['Use syaml_dict instead of dict at '
E + '/Users/gamblin2/src/spack/lib/spack/spack/spec.py:1495:28']
```
and
```
E AssertionError: assert [] == ['Use syaml_dict instead of ...ack/architecture.py:359:15']
E Right contains more items, first extra item: 'Use syaml_dict instead of dict at /Users/gamblin2/src/spack/lib/spack/spack/architecture.py:359:15'
E Full diff:
E - []
E + ['Use syaml_dict instead of dict at '
E + '/Users/gamblin2/src/spack/lib/spack/spack/architecture.py:359:15']
```
|
|
This commit introduces a `--no-check-signature` option for
`spack install` so that unsigned packages can be installed. It is
off by default (signatures required).
|
|
VSX alitvec extensions are supported by PowerISA from v2.06 (Power7+), but might
not be listed in features.
FMA has been supported by PowerISA since Power1, but might not be listed in
features.
This commit adds these features to all the power ISA family sets.
|
|
Add an optional 'submodules_delete' field to Git versions in Spack
packages that allows them to remove specific submodules.
For example: the nervanagpu submodule has become unavailable for the
PyTorch project (see issue 19457 at
https://github.com/pytorch/pytorch/issues/). Removing this submodule
allows 0.4.1 to build.
|
|
@version. (#14732)
|
|
only search the mirrors in get_spec if spec is not in _cached_specs. (#14714)
* Initialize _cached_specs at the file level and check for spec in it before searching mirrors in try_download_spec.
* Make _cached_specs a set to avoid duplicates
* Fix packaging test
* Ignore build_cache in stage when spec.yaml files are downloaded.
|
|
`spack -V` previously always returned the version of spack from
`spack.spack_version`. This gives us a general idea of what version
users are on, but if they're on `develop` or on some branch, we have to
ask more questions.
This PR makes `spack -V` check whether this instance of Spack is a git
repository, and if it is, it appends useful information from `git
describe --tags` to the version. Specifically, it adds:
- number of commits since the last release tag
- abbreviated (but unique) commit hash
So, if you're on `develop` you might get something like this:
$ spack -V
0.13.3-912-3519a1762
This means you're on commit 3519a1762, which is 912 commits ahead of
the 0.13.3 release.
If you are on a release branch, or if you are using a tarball of Spack,
you'll get the usual `spack.spack_version`:
$ spack -V
0.13.3
This should help when asking users what version they are on, since a lot
of people use the `develop` branch.
|
|
* Document how to use Spack to replace Homebrew/Conda
* Initial draft; can iterate more as features become available
|
|
This PR adds a new command to Spack:
```console
$ spack containerize -h
usage: spack containerize [-h] [--config CONFIG]
creates recipes to build images for different container runtimes
optional arguments:
-h, --help show this help message and exit
--config CONFIG configuration for the container recipe that will be generated
```
which takes an environment with an additional `container` section:
```yaml
spack:
specs:
- gromacs build_type=Release
- mpich
- fftw precision=float
packages:
all:
target: [broadwell]
container:
# Select the format of the recipe e.g. docker,
# singularity or anything else that is currently supported
format: docker
# Select from a valid list of images
base:
image: "ubuntu:18.04"
spack: prerelease
# Additional system packages that are needed at runtime
os_packages:
- libgomp1
```
and turns it into a `Dockerfile` or a Singularity definition file, for instance:
```Dockerfile
# Build stage with Spack pre-installed and ready to be used
FROM spack/ubuntu-bionic:prerelease as builder
# What we want to install and how we want to install it
# is specified in a manifest file (spack.yaml)
RUN mkdir /opt/spack-environment \
&& (echo "spack:" \
&& echo " specs:" \
&& echo " - gromacs build_type=Release" \
&& echo " - mpich" \
&& echo " - fftw precision=float" \
&& echo " packages:" \
&& echo " all:" \
&& echo " target:" \
&& echo " - broadwell" \
&& echo " config:" \
&& echo " install_tree: /opt/software" \
&& echo " concretization: together" \
&& echo " view: /opt/view") > /opt/spack-environment/spack.yaml
# Install the software, remove unecessary deps and strip executables
RUN cd /opt/spack-environment && spack install && spack autoremove -y
RUN find -L /opt/view/* -type f -exec readlink -f '{}' \; | \
xargs file -i | \
grep 'charset=binary' | \
grep 'x-executable\|x-archive\|x-sharedlib' | \
awk -F: '{print $1}' | xargs strip -s
# Modifications to the environment that are necessary to run
RUN cd /opt/spack-environment && \
spack env activate --sh -d . >> /etc/profile.d/z10_spack_environment.sh
# Bare OS image to run the installed executables
FROM ubuntu:18.04
COPY --from=builder /opt/spack-environment /opt/spack-environment
COPY --from=builder /opt/software /opt/software
COPY --from=builder /opt/view /opt/view
COPY --from=builder /etc/profile.d/z10_spack_environment.sh /etc/profile.d/z10_spack_environment.sh
RUN apt-get -yqq update && apt-get -yqq upgrade \
&& apt-get -yqq install libgomp1 \
&& rm -rf /var/lib/apt/lists/*
ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l"]
```
|
|
concretized spec. (#14698)
* Add binary_distribution::get_spec which takes concretized spec
Add binary_distribution::try_download_specs for downloading of spec.yaml files to cache
get_spec is used by package::try_install_from_binary_cache to download only the spec.yaml
for the concretized spec if it exists.
|
|
(#14696)
* Use non-mutable default for names
* Make suggested change
|
|
* add short docs section on conditional dependencies
* add reference to spec syntax
* add note that conditional dependencies can save time
|
|
Locate the environment lock in the hidden environment directory
rather than the root of the environment.
|
|
(#14659)
* Limit the number of spec flies downloaded to find matches
|
|
The Spec parser currently calls `spec.traverse()` after every parse, in
order to set the platform if it's not set. We don't need to do a full
traverse -- we can just check the platforrm as new specs are parsed.
This takes about a second off the time required to import all packages in
Spack (from 8s to 7s).
- [x] simplify platform-setting logic in `SpecParser`.
|
|
`filename_for_package_name()` and `dirname_for_package_name()`
automatically construct a Spec from their arguments, which adds a fair
amount of overhead to importing lots of packages. Removing this removes
about 11% of the runtime of importing all packages in Spack (9s -> 8s).
- [x] `filename_for_package_name()` and `dirname_for_package_name()` now
take a string `pkg_name` arguments instead of specs.
|
|
* `Environment.__init__` is now synchronized with all writing operations
* `spack uninstall` now synchronizes its updates to any associated environment
* A side effect of this is that the environment is no longer updated piecemeal as specs are uninstalled - all specs are removed from the environment before they are uninstalled
|
|
This commit makes two fundamental corrections to tests:
1) Changes 'matches' to the correct 'match' argument for 'pytest.raises' (for all affected tests except those checking for 'SystemExit');
2) Replaces the 'match' argument for tests expecting 'SystemExit' (since the exit code is retained instead) with 'capsys' error message capture.
Both changes are needed to ensure the associated exception message is actually checked.
|
|
|
|
Updates to environments were not multi-process safe, which prevented them from taking advantage of parallel builds as implemented in #13100. This is a minimal set of changes to enable `spack install` in an environment to be parallelized:
- [x] add an internal lock, stored in the `.spack-env` directory,
to synchronize updates to `spack.yaml` and `spack.lock`
- [x] add `Environment.write_transaction` interface for this lock
- [x] makes use of `Environment.write_transaction` in `install`,
`add`, and `remove` commands
- `uninstall` is not synchronized yet; that is left for a future PR.
|
|
This PR adds a note about segfaults with the Intel compiler when the
install paths are long and the dependencies many.
|
|
|
|
before, a 'time spack load singularity'
4.129u 0.346s 0:04.47 99.7% 0+0k 0+8io 0pf+0w
after, a 'time spack load singularity'
0.844u 0.319s 0:01.16 99.1% 0+0k 0+16io 0pf+0w
|
|
|
|
Spack commands referring to upstream-installed specs by hash have
been broken since 6b619da (merged September 2019), which added a new
Database function specifically for parsing hashes from command-line
specs; this function was inappropriately attempting to acquire locks
on upstream databases.
This PR updates the offending function to avoid locking upstream
databases and also updates associated tests to catch regression
errors: the upstream database created for these tests was not
explicitly set as an upstream (i.e. initialized with upstream=True)
so it was not guarding against inappropriate accesses.
|
|
for older version. (#14237)
|
|
|
|
|
|
* Fix bug introduced by pull request 14467 being merged
* Only filter on platform and OS
|
|
|
|
* Unified environment modifications in config files
fixes #13357
This commit factors all the code that is involved in
the validation (schema) and parsing of environment modifications
from configuration files in a single place. The factored out
code is then used for module files and compiler configuration.
Attributes were separated by dashes in `compilers.yaml` files and
by underscores in `modules.yaml` files. This PR unifies the syntax
on attributes separated by underscores.
Unit testing of environment modifications in compilers
has been refactored and simplified.
|
|
|
|
(#14467)
|
|
* Add spack config list command for tab completion
* Update tab completion scripts
|
|
Using `sys.executable` to run Python in a sub-shell doesn't always work in a virtual environment as the `sys.executable` Python is not necessarily compatible with any loaded spack/other virtual environment.
- revert use of sys.executable to print out subshell environment (#14496)
- try instead to use an available python, then if there *is not* one, use `sys.executable`
- this addresses RHEL8 (where there is no `python` and `PYTHONHOME` issue in a simpler way
|
|
Openblas target is now determined automatically upon inspection of
`TargetList.txt`. If the spack target is a generic architecture family
(like x86_64 or aarch64) the DYNAMIC_ARCH setting is used
instead of targeting a specific microarchitecture.
|
|
Instead of another script, this adds a simple argument to `spack
commands` that updates the completion script. Developers can now just
run:
spack commands --update-completion
This should make it simpler for developers to remember to run this
*before* the tests fail. Also, this version tab-completes.
|
