| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
This is an amended version of https://github.com/spack/spack/pull/24894 (reverted in https://github.com/spack/spack/pull/29603). https://github.com/spack/spack/pull/24894
broke all instances of `spack external find` (namely when it is invoked without arguments/options)
because it was mandating the presence of a file which most systems would not have.
This allows `spack external find` to proceed if that file is not present and adds tests for this.
- [x] Add a test which confirms that `spack external find` successfully reads a manifest file
if present in the default manifest path
--- Original commit message ---
Adds `spack external read-cray-manifest`, which reads a json file that describes a
set of package DAGs. The parsed results are stored directly in the database. A user
can see these installed specs with `spack find` (like any installed spec). The easiest
way to use them right now as dependencies is to run
`spack spec ... ^/hash-of-external-package`.
Changes include:
* `spack external read-cray-manifest --file <path/to/file>` will add all specs described
in the file to Spack's installation DB and will also install described compilers to the
compilers configuration (the expected format of the file is described in this PR as well including examples of the file)
* Database records now may include an "origin" (the command added in this PR
registers the origin as "external-db"). In the future, it is assumed users may want
to be able to treat installs registered with this command differently (e.g. they may
want to uninstall all specs added with this command)
* Hash properties are now always preserved when copying specs if the source spec
is concrete
* I don't think the hashes of installed-and-concrete specs should change and this
was the easiest way to handle that
* also specs that are concrete preserve their `.normal` property when copied
(external specs may mention compilers that are not registered, and without this
change they would fail in `normalize` when calling `validate_or_raise`)
* it might be this should only be the case if the spec was installed
- [x] Improve testing
- [x] Specifically mark DB records added with this command (so that users can do
something like "uninstall all packages added with `spack read-external-db`)
* This is now possible with `spack uninstall --all --origin=external-db` (this will
remove all specs added from manifest files)
- [x] Strip variants that are listed in json entries but don't actually exist for the package
|
|
* ASP-based solver: discard unknown packages from reuse
This is an add-on to #28259 that cover for the case of
a single package.py being removed from a repository,
rather than an entire custom repository being removed.
* Add unit test
|
|
CTest determines whether to enable tests using the BUILD_TESTING variable.
This should be used by projects to conditionally enable the compilation of tests.
Spack knowns which packages have to run tests and can thus automatically define this variable.
|
|
|
|
I tried to use --overwrite on nvhpc, but nvhpc's install size is 16GB. Seems
better to do os.rename in the same directory than moving the directory to
`/tmp`.
- [x] install --overwrite: use rename instead of tmpdir
- [x] use tempfile
|
|
fixes #28259
This commit discard specs from unknown namespaces from the
ones that can be "reused" during concretization. Previously
Spack would just error out when encountering them.
|
|
Allow re-use of run_test() in install_time_test_callbacks
Co-authored-by: Greg Becker <becker33@llnl.gov>
|
|
|
|
|
|
The parent thread in the process stdout redirection logic on Windows
was closing a file that was being read in child thread, which lead to
error-based termination of the reader thread. This updates the
interaction to avoid the error.
|
|
|
|
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
|
|
* ASP-based solver: allow configuring target selection
This commit adds a new "concretizer:targets" configuration
section, and two options under it.
- "concretizer:targets:granularity" allows switching from
considering only generic targets to consider all possible
microarchitectures.
- "concretizer:targets:host_compatible" instead controls
whether we can concretize for microarchitectures that
are incompatible with the current host.
* Add documentation
* Add unit-tests
|
|
With an active environment, you can now run "spack concretize --quiet"
and it will suppress printing the concretized specs.
|
|
* ASP-based solver: always consider version of installed packages
fixes #29201
Explicitly add facts for versions of installed software when
using the --reuse option, so that we could consider versions
that are not declared in package.py
|
|
The parser is already committing a crime of querying the database for
specs when it encounters a `/hash`. It's helpful, but unfortunately not
helpful when trying to install a specific spec in an environment by
hash. Therefore, consider the environment first, then the database.
This allows the following:
```console
$ spack -e . concretize
==> Starting concretization
==> Environment concretized in 0.27 seconds.
==> Concretized diffutils
- 7vangk4 diffutils@3.8%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
- hyb7ehx ^libiconv@1.16%gcc@10.3.0 libs=shared,static arch=linux-ubuntu20.04-zen2
$ spack -e . install /hyb7ehx
==> Installing libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
...
==> libiconv: Successfully installed libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
Fetch: 0.01s. Build: 17.54s. Total: 17.55s.
[+] /tmp/tmp.VpvYApofVm/store/linux-ubuntu20.04-zen2/gcc-10.3.0/libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
```
|
|
Fix bug introduced in #30191. `Spec.installed` and `Spec.installed_upstream` should just return
`False` for abstract specs, as they can be called in that context.
- [x] `Spec.installed` returns `False` now instead of asserting that the `Spec`
is concrete.
- [x] `Spec.installed_upstream` returns `False` now instead of asserting that the `Spec`
is concrete.
- [x] `Spec.installed_upstream` no longer caches its result, as install status seems
like a bad thing to cache -- it can easily be invalidated. Calling code should
use transactions if there are peformance issues, as with other places in Spack.
- [x] add tests for `Spec.installed` and `Spec.installed_upstream`
|
|
This PR moves the `installed` and `installed_upstream` properties from `PackageBase` to `Spec` and is a step towards being able to reuse specs for which we don't have a `package.py` available. It _should_ be sufficient to complete the concretization step and see the spec in the concretized DAG.
To fully reuse a spec without a package.py though we need a way to serialize enough data to reconstruct the results of calls to:
- `Spec.libs`, `Spec.headers` and `Spec.ommand`
- `Package.setup_dependent_*_environment` and `Package.setup_run_environment`
- [x] Add stub methods to packages with warnings
- [x] Add a missing "root=False" in cmd/fetch.py
- [x] Assert that a spec is concrete before checking installation status
|
|
|
|
This PR updates the list of images we build nightly, deprecating
Ubuntu 16.04 and CentOS 8 and adding Ubuntu 20.04, Ubuntu 22.04
and CentOS Stream. It also removes a lot of duplication by generating
the Dockerfiles during the CI workflow and uploading them as artifacts
for later inspection or reuse.
|
|
|
|
|
|
Fix test_ci_generate_prune_untouched(), which would fail if run when
the latest commit changed the .gitlab-ci.yml. This change mocks the
get_stack_changed() method in that test to disregard the state of
the current spack repo in favor of a mock repo under test control.
|
|
This makes it easier to write `spack.lock: spack.yaml` type of rules in `Makefiles`.
|
|
|
|
|
|
gitlab ci: Remove code for relating CDash builds
Relating CDash builds to their dependencies was a seldom used feature. Removing
it will make it easier for us to reorganize our CDash projects & build groups in the
future by eliminating the needs to keep track of CDash build ids in our binary mirrors.
|
|
* Allow packages to add a 'submodules' property that determines when ad-hoc Git-commit-based versions should initialize submodules
* add support for ad-hoc git-commit-based versions to instantiate submodules if the associated package has a 'submodules' property and it indicates this should happen for the associated spec
* allow Package-level submodule request to influence all explicitly-defined version() in the Package
* skip test on windows which fails because of long paths
|
|
* Add support for Python 3.10
* Update unit-tests to use 3.10
* Update Getting started section of the docs
* Update bootstrap action
|
|
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
|
|
* Fix to concretize.lp
do not allow dev specs to be reused
Co-authored-by: Gregory Becker <becker33@llnl.gov>
|
|
Spack added support in #24639 for ad-hoc Git-commit-hash-based
versions: A user can install a package x@hash, where X is a package
that stores its source code in a Git repository, and the hash refers
to a commit in that repository which is not recorded as an explicit
version in the package.py file for X.
A couple issues were found relating to this:
* If an environment defines an alternative package repo (i.e. with
repos.yaml), and spack.yaml contains user Specs with ad-hoc
Git-commit-hash-based versions for packages in that repo,
then as part of retrieving the data needed for version comparisons
it will attempt to retrieve the package before the environment's
configuration is instantiated.
* The bookkeeping information added to compare ad-hoc git versions was
being stripped from Specs during concretization (such that user
Specs which succeeded before concretizing would then fail after)
This addresses the issues:
* The first issue is resolved by deferring access to the associated
Package until the versions are actually compared to one another.
* The second issue is resolved by ensuring that the Git bookkeeping
information is explicitly applied to Specs after they are concretized.
This also:
* Resolves an ambiguity in the mock_git_version_info fixture used to
create a tree of Git commits and provide a list where each index
maps to a known commit.
* Isolates the cache used for Git repositories in tests using the
mock_git_version_info fixture
* Adds a TODO which points out that if the remote Git repository
overwrites tags, that Spack will then fail when using
ad-hoc Git-commit-hash-based versions
|
|
This commit updates the `gpg publish` command to work with the mirror
arguments, when trying to push keys to a mirror.
- [x] update `gpg publish command
- [x] add test for publishing GPG keys and rebuilding the key index within a mirror
|
|
|
|
In a typical call to spack, the OperatingSystem gets instantiated
multiple times. For macOS, each one requires a call to `sw_vers`, which
is done through the Executable helper class. Memoizing
reduces the call count from "spac spec" from three to one.
|
|
Currently environments are indexed by build hashes. When looking into this bug I noticed there is a disconnect between environments that are concretized in memory for the first time and environments that are read from a `spack.lock`. The issue is that specs read from a `spack.lock` don't have a full hash, since they are indexed by a build hash which is strictly coarser. They are also marked "final" as they are read from a file, so we can't compute additional hashes.
This bugfix PR makes "first concretization" equivalent to re-reading the specs from a corresponding `spack.lock`, and doing so unveiled a few tests were we were making wrong assumptions and relying on the fact that a `spack.lock` file was not there already.
* Add unit test
* Modify mpich to trigger jobs in pipelines
* Fix two failing unit tests
* Fix another full_hash vs. build_hash mismatch in tests
|
|
* Ignore top-level module config; add auto-update
In Spack 0.17 we got module sets (modules:[name]:[prop]), and for
backwards compat modules:[prop] was short for modules:default:[prop].
But this makes it awkward to define default config for the "default"
module set.
Since 0.17 is branched off, we can now deprecate top-level module config
(that is, just ignore it with a warning).
This PR does that, and it implements `spack config update modules` to
make upgrading easy (we should have added that to 0.17 already...)
It also removes references to `dotkit` stuff which was already
deprecated in 0.13 and could have been removed in 0.14.
Prefix inspections are the only exception, since the top-level prefix inspections
used for `spack load` and `spack env activate`.
|
|
Spack currently allows dependencies to be concretized for an
architecture incompatible with the root. This commit adds rules
to make this situation impossible by design.
|
|
* Extract the MetaPathFinder and Loaders for packages in their own classes
https://peps.python.org/pep-0451/
Currently, RepoPath and Repo implement the (deprecated) interface of
MetaPathFinder (find_module) and of Loader (load_module). This commit
extracts both of them and places the code in their own classes.
The MetaPathFinder interface is updated to contain both the deprecated
"find_module" (for Python 2.7 support) and the recommended "find_spec".
Update of the Loader interface is deferred at a subsequent commit.
* Move the lines to be prepended inside "RepoLoader"
Also adjust the naming of a few variables too
* Remove spack.util.imp, since code is only used in spack.repo
* Remove support from loading Python modules Python > 3 but < 3.5
* Remove `Repo._create_namespace`
This function was interacting badly with the MetaPathFinder
and causing issues with "normal" imports. Removing the
function allows to do things like:
```python
import spack.pkg.builtin.mpich
cls = spack.pkg.builtin.mpich.Mpich
```
* Remove code needed to trigger the Singleton evaluation
The finder is coded in a way to trigger the Singleton,
so we don't need external code now that we register it
at module level into `sys.meta_path`.
* Add unit tests
|
|
|
|
|
|
|
|
Some servers require `User-Agent` to be set, and otherwise error with
access denied. One such example is mpich.
To fix this, set `User-Agent: Spackbot/[version]` as a header.
Apparently by convention, it should include the word `bot`.
|
|
Show each `[src a] and [src b] both project to [dst]` on a separate
line.
|
|
#27021 broke fetching for CVS-based packages because:
- The mirror logic was using URL parsing to extract a path from the
CVS repository location
- #27021 added sanity checks to enforce that strings passed to the
URL parser were actually URLs
This replaces the call to "url_util.parse" with logic that is
customized for CVS. This implies that VCSFetchStrategy should
rename the "url_attr" attribute to something more generic, but
that should be handled separately.
|
|
Allow declaring possible values for variants with an associated condition. If the variant takes one of those values, the condition is imposed as a further constraint.
The idea of this PR is to implement part of the mechanisms needed for modeling [packages with multiple build-systems]( https://github.com/spack/seps/pull/3). After this PR the build-system directive can be implemented as:
```python
variant(
'build-system',
default='cmake',
values=(
'autotools',
conditional('cmake', when='@X.Y:')
),
description='...',
)
```
Modifications:
- [x] Allow conditional possible values in variants
- [x] Add a unit-test for the feature
- [x] Add documentation
|
|
* tests for rewiring pure specs to spliced specs
* relocate text, binaries, and links
* using llnl.util.symlink for windows compat.
Note: This does not include CLI hooks for relocation.
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
|
|
- Add variants for various common build flags, including support for both versions of the Racket VM environment.
- Prevent `-j` flags to `make`, which has been known to cause problems with Racket builds.
- Prefer the minimal release to improve install times. Bells and whistles carry their own runtime dependencies and should be installed via `raco`. An enterprising user may even create a `RacketPackage` class to make spack aware of `raco` installed packages.
- Match the official version numbering scheme.
|
|
Update "spack external find --all" to also find library-only packages.
A Package can add a ".libraries" attribute, which is a list of regular
expressions to use to find libraries associated with the Package.
"spack external find --all" will search LD_LIBRARY_PATH for potential
libraries.
This PR adds examples for NCCL, RCCL, and hipblas packages. These
examples specify the suffix ".so" for the regular expressions used
to find libraries, so generally are only useful for detecting library
packages on Linux.
|
