summaryrefslogtreecommitdiff
path: root/share
AgeCommit message (Collapse)AuthorFilesLines
2021-08-02ci: Add RADIUSS stack to cloud CI (#23922)Tamara Dahlgren2-2/+131
Add RADIUSS software stack to gitlab PR testing pipelines
2021-07-30CI: capture stdout/stderr output to artifact files (#24401)Scott Wittenburg1-1/+2
Gitlab truncates job trace output (even the complete raw output) at 4MB, so this change captures it to a file under "user_data" artifacts as well, to make sure we can debug output from the end of the rebuild job.
2021-07-30adding spack diff command (#22283)Vanessasaurus1-1/+10
A `spack diff` will take two specs, and then use the spack.solver.asp.SpackSolverSetup to generate lists of facts about each (e.g., nodes, variants, etc.) and then take a set difference between the two to show the user the differences. Example output: $ spack diff python@2.7.8 python@3.8.11 ==> Warning: This interface is subject to change. --- python@2.7.8/tsxdi6gl4lihp25qrm4d6nys3nypufbf +++ python@3.8.11/yjtseru4nbpllbaxb46q7wfkyxbuvzxx @@ variant_value @@ - python patches a8c52415a8b03c0e5f28b5d52ae498f7a7e602007db2b9554df28cd5685839b8 + python patches 0d98e93189bc278fbc37a50ed7f183bd8aaf249a8e1670a465f0db6bb4f8cf87 @@ version @@ - openssl Version(1.0.2u) + openssl Version(1.1.1k) - python Version(2.7.8) + python Version(3.8.11) Currently this uses diff-like output but we will attempt to improve on this in the future. One use case for `spack diff` is whenever a user has a disambiguate situation and cannot remember how two different installs are different. The command can also output `--json` in the case of a more analysis type use case where we want to save complete data with all diffs and the intersection. However, the command is really more intended for a command line use case, and we likely will have an analyzer more suited to saving data Signed-off-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com> Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
2021-07-29Move build tests from GA to Gitlab (#25120)Massimiliano Culpo2-1/+92
Modifications: - Remove the "build tests" workflow from GitHub Actions - Setup a similar e2e test on Gitlab In this way we'll reduce load on GitHub Actions workflows and for e2e tests will benefit from the buildcache reuse granted by pipelines.
2021-07-27bugfix: be careful about GITHUB_BASE_REF in `spack style`Todd Gamblin1-1/+6
`spack style` previously used a Travis CI variable to figure out what the base branch of a PR was, and this was apparently also set on `develop`. We switched to `GITHUB_BASE_REF` to support GitHub Actions, but it looks like this is set to `""` in pushes to develop, so `spack style` breaks there. This PR does two things: - [x] Remove `GITHUB_BASE_REF` knowledge from `spack style` entirely - [x] Handle `GITHUB_BASE_REF` in style scripts instead, and explicitly pass the base ref if it is present, but don't otherwise. This makes `spack style` *not* dependent on the environment and fixes handling of the base branch in the right place.
2021-07-27`spack style`: add `--root` option (#25085)Todd Gamblin1-2/+2
This adds a `--root` option so that `spack style` can check style for a spack instance other than its own. We also change the inner workings of `spack style` so that `--config FILE` (and similar options for the various tools) options are used. This ensures that when `spack style` runs, it always uses the config from the running spack, and does *not* pick up configuration from the external root. - [x] add `--root` option to `spack style` - [x] add `--config` (or similar) option when invoking style tools - [x] add a test that verifies we can check an external instance
2021-07-24`spack style`: automatically bootstrap dependenciesvsoch1-1/+0
This uses our bootstrapping logic to automatically install dependencies for `spack style`. Users should no longer have to pre-install all of the tools (`isort`, `mypy`, `black`, `flake8`). The command will do it for them. - [x] add logic to bootstrap specs with specific version requirements in `spack style` - [x] remove style tools from CI requirements (to ensure we test bootstrapping) - [x] rework dependencies for `mypy` and `py-typed-ast` - `py-typed-ast` needs to be a link dependency - it needs to be at 1.4.1 or higher to work with python 3.9 Signed-off-by: vsoch <vsoch@users.noreply.github.com>
2021-07-24Bump codecov/action to v2.0.2 (#24983)Massimiliano Culpo2-0/+13
* build(deps): bump codecov/codecov-action from 1 to 2.0.1 Bumps [codecov/codecov-action](https://github.com/codecov/codecov-action) from 1 to 2.0.1. - [Release notes](https://github.com/codecov/codecov-action/releases) - [Changelog](https://github.com/codecov/codecov-action/blob/master/CHANGELOG.md) - [Commits](https://github.com/codecov/codecov-action/compare/v1...v2.0.1) --- updated-dependencies: - dependency-name: codecov/codecov-action dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> * Update arguments to codecov action * Try to delete the symbolic link to root folder Hopefully this should get rid of the ELOOP error * Delete also for shell tests and MacOS * Bump to v2.0.2 Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-07-16trilinos: simplify some variants (#24820)Seth R. Johnson2-2/+2
* trilinos: rename basker variant The Basker solver is part of amesos2 but is clearer without the extra scoping. * trilinos: automatically enable teuchos and remove variant Basically everything in trilinos needs teuchos * trilinos: group top-level dependencies * trilinos: update dependencies, removing unused - GLM, X11 are unused (x11 lacks dependency specs too) - Python variant is more like a TPL so rearrange that - Gtest internal package shouldn't be compiled or exported - Add MPI4PY requirement for pytrilinos * trilinos: remove package meta-options - XSDK settings and "all opt packages" are not used anywhere - all optional packages are dangerous * trilinos: Use hwloc iff kokkos See #19119, also the HWLOC tpl name was misspelled so this was being ignored before. * Flake * Fix trilinos +netcdf~mpi * trilinos: default to disabling external dependencies * Remove teuchos from downstream dependencies * fixup! trilinos: Use hwloc iff kokkos * Add netcdf requirements to packages with ^trilinos+exodus * trilinos: disable exodus by default * fixup! Add netcdf requirements to packages with ^trilinos+exodus * trilinos: only enable hwloc when @13: +kokkos * xyce: propagate trilinos dependencies more simply * dtk: fix missing boost dependency * trilinos: remove explicit metis dependency * trilinos: require metis/parmetis for zoltan Disable zoltan by default to minimize default dependencies * trilinos: mark mesquite disabled and fix kokkos arch * xsdk: fix trilinos to also list zoltan [with zoltan2] * ci: remove nonexistent variant from trilinos * trilinos: add missing boost dependency Co-authored-by: Satish Balay <balay@mcs.anl.gov>
2021-07-15ci: build trilinos with all variants on (#24908)eugeneswalker2-3/+2
2021-07-12Enable/disable bootstrapping and customize store location (#23677)Massimiliano Culpo1-1/+31
* Permit to enable/disable bootstrapping and customize store location This PR adds configuration handles to allow enabling and disabling bootstrapping, and to customize the store location. * Move bootstrap related configuration into its own YAML file * Add a bootstrap command to manage configuration
2021-07-11Expat: add version 2.4.0, 2.4.1; fix CVE-2013-0340 (#24669)Christoph Conrads2-2/+2
* Expat: add version 2.4.0, 2.4.1; fix CVE-2013-0340 fixes #24628 * E4S pipeline: update pinned Expat version
2021-07-10docker: remove boto3 from CentOS 6 since it requires and updated pip (#24813)Massimiliano Culpo1-1/+0
2021-07-09docker: Fix CentOS 6 build on Docker Hub (#24804)Massimiliano Culpo1-0/+3
This change make yum usable again on CentOS 6
2021-07-08imports: sort imports everywhere in Spack (#24695)Todd Gamblin1-1/+2
* fix remaining flake8 errors * imports: sort imports everywhere in Spack We enabled import order checking in #23947, but fixing things manually drives people crazy. This used `spack style --fix --all` from #24071 to automatically sort everything in Spack so PR submitters won't have to deal with it. This should go in after #24071, as it assumes we're using `isort`, not `flake8-import-order` to order things. `isort` seems to be more flexible and allows `llnl` mports to be in their own group before `spack` ones, so this seems like a good switch.
2021-07-08setup-env: allow users to skip slow parts (#24545)Adam J. Stewart2-87/+91
2021-07-07style: clean up and restructure `spack style` commandTodd Gamblin2-3/+3
This consolidates code across tools in `spack style` so that each `run_<tool>` function can be called indirecty through a dictionary of handlers, and os that checks like finding the executable for the tool can be shared across commands. - [x] rework `spack style` to use decorators to register tools - [x] define tool order in one place in `spack style` - [x] fix python 2/3 issues to Get `isort` checks working - [x] make isort error regex more robust across versions - [x] remove unused output option - [x] change vestigial `TRAVIS_BRANCH` to `GITHUB_BASE_REF` - [x] update completion
2021-07-07add e4s-on-power stack (#24734)eugeneswalker2-0/+406
2021-06-29pipelines: build warpx on instance with more memory (#24592)Scott Wittenburg1-0/+1
2021-06-24Pipelines: Set a pipeline type variable (#24505)Scott Wittenburg1-2/+2
Spack pipelines need to take specific actions internally that depend on whether the pipeline is being run on a PR to spack or a merge to the develop branch. Pipelines can also run in other repositories, which represents other possible use cases than just the two mentioned above. This PR creates a "SPACK_PIPELINE_TYPE" gitlab variable which is propagated to rebuild jobs, and is also used internally to determine which pipeline-specific tasks to run. One goal of the PR is fix an issue where rebuild jobs which failed on develop pipelines did not properly report the broken full hash to the "broken-specs-url".
2021-06-22Axom: Remove blueos check on cuda variant (#24349)Chris White1-2/+1
* remove blueos check on cuda variant, fix typo * restore necessary compiler guard * remove axom+cuda from testing because it only partially works outside ppc systems
2021-06-18Removed unofficial MAGMA release and enabled MAGMA in e4s (#24400)G-Ragghianti1-1/+1
2021-06-18Add an audit system to Spack (#23053)Massimiliano Culpo1-1/+27
Add a new "spack audit" command. This command can check for issues with configuration or with packages and is intended to help a user debug a failed Spack build. In some cases the reported issues are always errors but are too costly to check for (e.g. packages that specify missing variants on dependencies). In other cases the issues may be legitimate but uncommon usage of Spack and we want to be sure the user intended the behavior (e.g. duplicate compiler definitions). Audits are grouped by theme, and for now the two themes are packages and configuration. For example you can run all available audits on packages with "spack audit packages". It is intended that in the future users will be able to define their own audits. The package audits are good candidates for running in package_sanity (i.e. they could catch bugs in user-submitted packages before they are merged) but that is left for a later PR.
2021-06-18Disable magma in the E4S pipeline (#24395)Massimiliano Culpo1-1/+1
Building magma has been failing consistently and is currently blocking PRs from being merged. Disable that spec while we investigate the failure and work on a fix.
2021-06-17Adding support for spack monitor with containerize (#23777)Vanessasaurus3-3/+3
This should get us most of the way there to support using monitor during a spack container build, for both Singularity and Docker. Some quick notes: ### Docker Docker works by way of BUILDKIT and being able to specify --secret. What this means is that you can prefix a line with a mount of type secret as follows: ```bash # Install the software, remove unnecessary deps RUN --mount=type=secret,id=su --mount=type=secret,id=st cd /opt/spack-environment && spack env activate . && export SPACKMON_USER=$(cat /run/secrets/su) && export SPACKMON_TOKEN=$(cat /run/secrets/st) && spack install --monitor --fail-fast && spack gc -y ``` Where the id for one or more secrets corresponds to the file mounted at `/run/secrets/<name>`. So, for example, to build this container with su (spackmon user) and sv (spackmon token) defined I would export them on my host and do: ```bash $ DOCKER_BUILDKIT=1 docker build --network="host" --secret id=st,env=SPACKMON_TOKEN --secret id=su,env=SPACKMON_USER -t spack/container . ``` And when we add `env` to the secret definition that tells the build to look for the secret with id "st" in the environment variable `SPACKMON_TOKEN` for example. If the user is building locally with a local spack monitor, we also need to set the `--network` to be the host, otherwise you can't connect to it (a la isolation of course.) ## Singularity Singularity doesn't have as nice an ability to clearly specify secrets, so (hoping this eventually gets implemented) what I'm doing now is providing the user instructions to write the credentials to a file, add it to the container to source, and remove when done. ## Tags Note that the tags PR https://github.com/spack/spack/pull/23712 will need to be merged before `--monitor-tags` will actually work because I'm checking for the attribute (that doesn't exist yet): ```bash "tags": getattr(args, "monitor_tags", None) ``` So when that PR is merged to update the argument group, it will work here, and I can either update the PR here to not check if the attribute is there (it will be) or open another one in the case this PR is already merged. Finally, I added a bunch of documetation for how to use monitor with containerize. I say "mostly working" because I can't do a full test run with this new version until the container base is built with the updated spack (the request to the monitor server for an env install was missing so I had to add it here). Signed-off-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: vsoch <vsoch@users.noreply.github.com>
2021-06-17e4s ci env: package preferences: use newer versions (#24371)eugeneswalker1-14/+14
2021-06-15e4s ci: specs: add datatransferkit (#24325)eugeneswalker1-0/+1
2021-06-15adding spack upload command (#24321)Vanessasaurus1-1/+5
this will first support uploads for spack monitor, and eventually could be used for other kinds of spack uploads Signed-off-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: vsoch <vsoch@users.noreply.github.com>
2021-06-14e4s ci environment: packages: update to newer versions (#24308)eugeneswalker1-6/+6
2021-06-11setup-env: allow users to skip module function setup (#24236)Adam J. Stewart2-2/+2
* setup-env: allow users to skip module function setup * Add documentation on SPACK_SKIP_MODULES
2021-06-09Update of Flecsi Spackage (#24106)Robert Pavel1-1/+1
* Update of Flecsi Spackage Update of flecsi spackage to reconcile differences between flecsi@1:1.9 and flecsi@2: for future support purposes * Removing Unnecessary Conditional Removing unused conditional. Initially the plan was to switch based on version in `cmake_args` but this was not necessary as build system variable names remained mostly the same and conflicts prevent the rest. For the most part, if a variant is there it does not need to check against what version of the code is being built. * Updated CI To Reconcile Flecsi Changes Updated CI to target flecsi@1.4.2 which best matches the previous release version and reconciled change in variant name
2021-06-08e4s ci: re-enable veloc builds after recent fixes (#24190)eugeneswalker1-1/+1
2021-05-30CI: E4S: enable full E4S (#24011)eugeneswalker1-78/+295
* e4s ci: enable full e4s * add llvm-amdgpu to list of specs needing an xlarge tagged runner * comment out qt and qwt because of intermittent build failures * remove +rocm specs because rocblas job consistently fails due to infrastructure
2021-05-28adding support for export of private gpg key (#22557)Vanessasaurus1-2/+2
This PR allows users to `--export`, `--export-secret`, or both to export GPG keys from Spack. The docs are updated that include a warning that this usually does not need to be done. This addresses an issue brought up in slack, and also represented in #14721. Signed-off-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: vsoch <vsoch@users.noreply.github.com>
2021-05-28Separable module configuration -- without the bugs this time (#23703)Greg Becker2-5/+5
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment). This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention. As part of this change, the module roots configuration moved from the config section to inside each module configuration. Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec.
2021-05-28Pipelines: reproducible builds (#22887)Scott Wittenburg3-11/+23
### Overview The goal of this PR is to make gitlab pipeline builds (especially build failures) more reproducible outside of the pipeline environment. The two key changes here which aim to improve reproducibility are: 1. Produce a `spack.lock` during pipeline generation which is passed to child jobs via artifacts. This concretized environment is used both by generated child jobs as well as uploaded as an artifact to be used when reproducing the build locally. 2. In the `spack ci rebuild` command, if a spec needs to be rebuilt from source, do this by generating and running an `install.sh` shell script which is then also uploaded as a job artifact to be run during local reproduction. To make it easier to take advantage of improved build reproducibility, this PR also adds a new subcommand, `spack ci reproduce-build`, which, given a url to job artifacts: - fetches and unzips the job artifacts to a local directory - looks for the generated pipeline yaml and parses it to find details about the job to reproduce - attempts to provide a copy of the same version of spack used in the ci build - if the ci build used a docker image, the command prints a `docker run` command you can run to get an interactive shell for reproducing the build #### Some highlights One consequence of this change will be much smaller pipeline yaml files. By encoding the concrete environment in a `spack.lock` and passing to child jobs via artifacts, we will no longer need to encode the concrete root of each spec and write it into the job variables, greatly reducing the size of the generated pipeline yaml. Additionally `spack ci rebuild` output (stdout/stderr) is no longer internally redirected to a log file, so job output will appear directly in the gitlab job trace. With debug logging turned on, this often results in log files getting truncated because they exceed the maximum amount of log output gitlab allows. If this is a problem, you still have the option to `tee` command output to a file in the within the artifacts directory, as now each generated job exposes a `user_data` directory as an artifact, which you can fill with whatever you want in your custom job scripts. There are some changes to be aware of in how pipelines should be set up after this PR: #### Pipeline generation Because the pipeline generation job now writes a `spack.lock` artifact to be consumed by generated downstream jobs, `spack ci generate` takes a new option `--artifacts-root`, inside which it creates a `concrete_env` directory to place the lockfile. This artifacts root directory is also where the `user_data` directory will live, in case you want to generate any custom artifacts. If you do not provide `--artifacts-root`, the default is for it to create a `jobs_scratch_dir` within your `CI_PROJECT_DIR` (a gitlab predefined environment variable) or whatever is your current working directory if that variable isn't set. Here's the diff of the PR testing `.gitlab-ci.yml` taking advantage of the new option: ``` $ git diff develop..pipelines-reproducible-builds share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml diff --git a/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml b/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml index 579d7b56f3..0247803a30 100644 --- a/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml +++ b/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml @@ -28,10 +28,11 @@ default: - cd share/spack/gitlab/cloud_pipelines/stacks/${SPACK_CI_STACK_NAME} - spack env activate --without-view . - spack ci generate --check-index-only + --artifacts-root "${CI_PROJECT_DIR}/jobs_scratch_dir" --output-file "${CI_PROJECT_DIR}/jobs_scratch_dir/cloud-ci-pipeline.yml" artifacts: paths: - - "${CI_PROJECT_DIR}/jobs_scratch_dir/cloud-ci-pipeline.yml" + - "${CI_PROJECT_DIR}/jobs_scratch_dir" tags: ["spack", "public", "medium", "x86_64"] interruptible: true ``` Notice how we replaced the specific pointer to the generated pipeline file with its containing folder, the same folder we passed as `--artifacts-root`. This way anything in that directory (the generated pipeline yaml, as well as the concrete environment directory containing the `spack.lock`) will be uploaded as an artifact and available to the downstream jobs. #### Rebuild jobs Rebuild jobs now must activate the concrete environment created by `spack ci generate` and provided via artifacts. When the pipeline is generated, a directory called `concrete_environment` is created within the artifacts root directory, and this is where the `spack.lock` file is written to be passed to the generated rebuild jobs. The artifacts root directory can be specified using the `--artifacts-root` option to `spack ci generate`, otherwise, it is assumed to be `$CI_PROJECT_DIR`. The directory containing the concrete environment files (`spack.yaml` and `spack.lock`) is then passed to generated child jobs via the `SPACK_CONCRETE_ENV_DIR` variable in the generated pipeline yaml file. When you don't provide custom `script` sections in your `mappings` within the `gitlab-ci` section of your `spack.yaml`, the default behavior of rebuild jobs is now to change into `SPACK_CONCRETE_ENV_DIR` and activate that environment. If you do provide custom rebuild scripts in your `spack.yaml`, be aware those scripts should do the same thing: assume `SPACK_CONCRETE_ENV_DIR` contains the concretized environment to activate. No other changes to existing custom rebuild scripts should be required as a result of this PR. As mentioned above, one key change made in this PR is the generation of the `install.sh` script by the rebuild jobs, as that same script is both run by the CI rebuild job as well as exported as an artifact to aid in subsequent attempts to reproduce the build outside of CI. The generated `install.sh` script contains only a single `spack install` command with arguments computed by `spack ci rebuild`. If the install fails, the job trace in gitlab will contain instructions on how to reproduce the build locally: ``` To reproduce this build locally, run: spack ci reproduce-build https://gitlab.next.spack.io/api/v4/projects/7/jobs/240607/artifacts [--working-dir <dir>] If this project does not have public pipelines, you will need to first: export GITLAB_PRIVATE_TOKEN=<generated_token> ... then follow the printed instructions. ``` When run locally, the `spack ci reproduce-build` command shown above will download and process the job artifacts from gitlab, then print out instructions you can copy-paste to run a local reproducer of the CI job. This PR includes a few other changes to the way pipelines work, see the documentation on pipelines for more details. This PR erelies on ~- [ ] #23194 to be able to refer to uninstalled specs by DAG hash~ EDIT: that is going to take longer to come to fruition, so for now, we will continue to install specs represented by a concrete `spec.yaml` file on disk. - [x] #22657 to support install a single spec already present in the active, concrete environment
2021-05-25adding json export for spack blame (#23417)Vanessasaurus1-1/+1
I would like to be able to export (and save and then load programatically) spack blame metadata, so this commit adds a spack blame --json argument, along with developer docs for it Signed-off-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: vsoch <vsoch@users.noreply.github.com>
2021-05-25first set of work to allow for saving local results with spack monitor (#23804)Vanessasaurus1-2/+2
This work will come in two phases. The first here is to allow saving of a local result with spack monitor, and the second will add a spack monitor command so the user can do spack monitor upload. Signed-off-by: vsoch <vsoch@users.noreply.github.com> Co-authored-by: vsoch <vsoch@users.noreply.github.com>
2021-05-19adding support to tag a buildvsoch1-2/+2
This will be useful to run multiple build experiments and organize by name Signed-off-by: vsoch <vsoch@users.noreply.github.com>
2021-05-17Revert "Separable module configurations (#22588)" (#23674)Harmen Stoppels1-3/+3
This reverts commit cefbe48c89209dc3df654795644973b1885cdea4.
2021-05-14Separable module configurations (#22588)Greg Becker1-3/+3
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment). This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention. As part of this change, the module roots configuration moved from the `config` section to inside each module configuration. Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec. TODO: - [x] code changes to support multiple module sets - [x] code changes to support modules relative to a view - [x] Tests for multiple module configurations - [x] Tests for modules relative to a view - [x] Backwards compatibility for module roots from config section - [x] Backwards compatibility for default module set without the name specified - [x] Tests for backwards compatibility
2021-05-07install cmd: --no-add in an env installs w/out concretize and addScott Wittenburg1-1/+1
In an active concretize environment, support installing one or more cli specs only if they are already present in the environment. The `--no-add` option is the default for root specs, but optional for dependency specs. I.e. if you `spack install <depspec>` in an environment, the dependency-only spec `depspec` will be added as a root of the environment before being installed. In addition, `spack install --no-add <spec>` fails if it does not find an unambiguous match for `spec`.
2021-04-27Dyninst: add elfutils versioning (#19648)Tim Haines1-1/+1
2021-04-26Dyninst: Add dependencies for v11.0.0 (#23121)Tim Haines1-1/+1
Also update the mpileaks unit test to avoid a conflict on CentOS 6 where Dyninst >=11.0.0 no longer builds due to a compiler version conflict.
2021-04-26ci: Remove leftover duplicate gitlab yaml (#23248)Chuck Atkins1-125/+0
2021-04-26ci: Generalize the GitLab CI pipeline yaml (#23225)Chuck Atkins3-34/+224
* ci: Generalize the GitLab CI pipeline yaml * ci: Rename cloud_e4s_pipelines to the more general cloud_pipelines
2021-04-15Merge pull request #21930 from vsoch/add/spack-monitorVanessasaurus1-3/+25
This provides initial support for [spack monitor](https://github.com/spack/spack-monitor), a web application that stores information and analysis about Spack installations. Spack can now contact a monitor server and upload analysis -- even after a build is already done. Specifically, this adds: - [x] monitor options for `spack install` - [x] `spack analyze` command - [x] hook architecture for analyzers - [x] separate build logs (in addition to the existing combined log) - [x] docs for spack analyze - [x] reworked developer docs, with hook docs - [x] analyzers for: - [x] config args - [x] environment variables - [x] installed files - [x] libabigail There is a lot more information in the docs contained in this PR, so consult those for full details on this feature. Additional tests will be added in a future PR.
2021-04-14update tutorial public keyGregory Becker1-35/+26
2021-03-29Add "spack [cd|location] --source-dir" (#22321)Harmen Stoppels1-2/+2
2021-03-19CI: drastically reduce the number of tests for package only PRs (#22410)Massimiliano Culpo1-1/+1
PRs that change only package recipes will only run tests under "package_sanity.py" and without coverage. This should result in a huge drop the cpu-time spent in CI for most PRs.