Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
With the new variable [prefix/]SPACK_PACKAGE_IDS you can conveniently execute
things after each successful install.
For example push just-built packages to a buildcache
```
SPACK ?= spack
export SPACK_COLOR = always
MAKEFLAGS += -Orecurse
MY_BUILDCACHE := $(CURDIR)/cache
.PHONY: all clean
all: push
ifeq (,$(filter clean,$(MAKECMDGOALS)))
include env.mk
endif
# the relevant part: push has *all* example/push/<pkg identifier> as prereqs
push: $(addprefix example/push/,$(example/SPACK_PACKAGE_IDS))
$(SPACK) -e . buildcache update-index --directory $(MY_BUILDCACHE)
$(info Pushed everything, yay!)
# and each example/push/<pkg identifier> has the install target as prereq,
# and the body can use target local $(HASH) and $(SPEC) variables to do
# things, such as pushing to a build cache
example/push/%: example/install/%
@mkdir -p $(dir $@)
$(SPACK) -e . buildcache create --allow-root --only=package --unsigned --directory $(MY_BUILDCACHE) /$(HASH) # push $(SPEC)
@touch $@
spack.lock: spack.yaml
$(SPACK) -e . concretize -f
env.mk: spack.lock
$(SPACK) -e . env depfile -o $@ --make-target-prefix example
clean:
rm -rf spack.lock env.mk example/
``
|
|
With this change we get the invariant that `mirror.fetch_url` and
`mirror.push_url` return valid URLs, even when the backing config
file is actually using (relative) paths with potentially `$spack` and
`$env` like variables.
Secondly it avoids expanding mirror path / URLs too early,
so if I say `spack mirror add name ./path`, it stays `./path` in my
config. When it's retrieved through MirrorCollection() we
exand it to say `file://<env dir>/path` if `./path` was set in an
environment scope.
Thirdly, the interface is simplified for the relevant buildcache
commands, so it's more like `git push`:
```
spack buildcache create [mirror] [specs...]
```
`mirror` is either a mirror name, a path, or a URL.
Resolving the relevant mirror goes as follows:
- If it contains either / or \ it is used as an anonymous mirror with
path or url.
- Otherwise, it's interpreted as a named mirror, which must exist.
This helps to guard against typos, e.g. typing `my-mirror` when there
is no such named mirror now errors with:
```
$ spack -e . buildcache create my-mirror
==> Error: no mirror named "my-mirror". Did you mean ./my-mirror?
```
instead of creating a directory in the current working directory. I
think this is reasonable, as the alternative (requiring that a local dir
exists) feels a bit pendantic in the general case -- spack is happy to
create the build cache dir when needed, saving a `mkdir`.
The old (now deprecated) format will still be available in Spack 0.20,
but is scheduled to be removed in 0.21:
```
spack buildcache create (--directory | --mirror-url | --mirror-name) [specs...]
```
This PR also touches `tmp_scope` in tests, because it didn't really
work for me, since spack fixes the possible --scope values once and
for all across tests, so tests failed when run out of order.
|
|
|
|
|
|
Sometimes I just want to know how many packages of a certain type there are.
- [x] add `--count` option to `spack list` that output the number of packages that
*would* be listed.
```console
> spack list --count
6864
> spack list --count py-
2040
> spack list --count r-
1162
```
|
|
* paraview: add `rocm` variant
This conflicts with CUDA and requires at least ParaView 5.11.0. More
dependencies are also needed.
* E4S: Add ParaView for ROCm and CUDA stacks
* DAV SDK: Update ParaView version and GPU variants
* Verify using hipcc vs amdclang++ for newer hip
Co-authored-by: Ben Boeckel <ben.boeckel@kitware.com>
|
|
|
|
|
|
Gitlab does not merge lists when a job extends two other definitions
that include the same list (e.g. tags). Also, it merges dictionaries
as long as the keys are distinct, but just takes the last mentioned
value when there are key collisions.
This change makes sure that when different tags are needed by a
pipeline, the ones we want are actually provided. It also changes
the example stack to better follow this pattern so we do not lead
developers astray in the future.
|
|
|
|
|
|
|
|
`spack graph` has been reworked to use:
- Jinja templates
- builder objects to construct the template context when DOT graphs are requested.
This allowed to add a new colored output for DOT graphs that highlights both
the dependency types and the nodes that are needed at runtime for a given spec.
|
|
* ML CI: Linux x86_64
* Update comments
* Rename again
* Rename comments
* Update to match other arches
* No compiler
* Compiler was wrong anyway
* Faster TF
|
|
|
|
|
|
The main issue that's fixed is that Spack passes paths (as strings) to
functions that require urls. That wasn't an issue on unix, since there
you can simply concatenate `file://` and `path` and all is good, but on
Windows that gives invalid file urls. Also on Unix, Spack would not deal with uri encoding like x%20y for file paths.
It also removes Spack's custom url.parse function, which had its own incorrect interpretation of file urls, taking file://x/y to mean the relative path x/y instead of hostname=x and path=/y. Also it automatically interpolated variables, which is surprising for a function that parses URLs.
Instead of all sorts of ad-hoc `if windows: fix_broken_file_url` this PR
adds two helper functions around Python's own path2url and reverse.
Also fixes a bug where some `spack buildcache` commands
used `-d` as a flag to mean `--mirror-url` requiring a URL, and others
`--directory`, requiring a path. It is now the latter consistently.
|
|
|
|
It's very common for us to tell users to grep through the existing Spack packages to
find examples of what they want, and it's also very common for package developers to do
it. Now, searching packages is even easier.
`spack pkg grep` runs grep on all `package.py` files in repos known to Spack. It has no
special options other than the search string; all options passed to it are forwarded
along to `grep`.
```console
> spack pkg grep --help
usage: spack pkg grep [--help] ...
positional arguments:
grep_args arguments for grep
options:
--help show this help message and exit
```
```console
> spack pkg grep CMakePackage | head -3
/Users/gamblin2/src/spack/var/spack/repos/builtin/packages/3dtk/package.py:class _3dtk(CMakePackage):
/Users/gamblin2/src/spack/var/spack/repos/builtin/packages/abseil-cpp/package.py:class AbseilCpp(CMakePackage):
/Users/gamblin2/src/spack/var/spack/repos/builtin/packages/accfft/package.py:class Accfft(CMakePackage, CudaPackage):
```
```console
> spack pkg grep -Eho '(\S*)\(PythonPackage\)' | head -3
AwsParallelcluster(PythonPackage)
Awscli(PythonPackage)
Bueno(PythonPackage)
```
## Return Value
This retains the return value semantics of `grep`:
* 0 for found,
* 1 for not found
* >1 for error
## Choosing a `grep`
You can set the ``SPACK_GREP`` environment variable to choose the ``grep``
executable this command should use.
|
|
Unit tests on Windows are supposed to pass for any PR to pass CI.
However, the return code for the unit test command was not being
checked, which meant this check was always passing (effectively
disabled). This PR
* Properly checks the result of the unit tests and fails if the
unit tests fail
* Fixes (or disables on Windows) a number of tests which have
"drifted" out of support on Windows since this check was
effectively disabled
|
|
At some point the `a` mock package became an `AutotoolsPackage`, and that means it
depends on `gnuconfig` on macOS. This was causing one of our shell tests to fail on
macOS because it was testing for `{a.prefix.bin}:{b.prefix.bin}` in `PATH`, but
`gnuconfig` shows up between them.
- [x] simplify the test to check `spack load --sh a` and `spack load --sh b` separately
|
|
This commit reworks the bootstrapping procedure to use Spack environments
as much as possible.
The `spack.bootstrap` module has also been reorganized into a Python package.
A distinction is made among "core" Spack dependencies (clingo, GnuPG, patchelf)
and other dependencies. For a number of reasons, explained in the `spack.bootstrap.core`
module docstring, "core" dependencies are bootstrapped with the current ad-hoc
method.
All the other dependencies are instead bootstrapped using a Spack environment
that lives in a directory specific to the interpreter and the architecture being used.
|
|
* py-alphafold: update to 2.2.4, update dependencies
* style
|
|
* patch command: add concretizer args
* tab completion
|
|
|
|
|
|
* CI: Update Data and Vis SDK Stack
* Update image to match target deployments (E4S)
* Enable all packages
* Test supported variants of ParaView and VisIt
* Sensei: Update Python hint for newer cmake
* Sensei: add Python3 hint
|
|
|
|
* warn about removal of deprecated format strings
Co-authored-by: becker33 <becker33@users.noreply.github.com>
|
|
* E4S: Conservatively add ecp-data-vis-sdk
* Remove ascent from CUDA SDK stack to stop hanging on Dray
* Adios2: Newer FindPython uses Python_EXECUTABLE
|
|
This adds super-lazy maintainer mode to `spack checksum`: Instead of
only printing the new checksums to the terminal, `-a` and
`--add-to-package` will add the new checksums to the `package.py` file
and open it in the editor afterwards for final checks.
|
|
This reverts commit 7f9af8d4a0bfbb1577e5ac9982624d8d0cb9b9ca.
|
|
Co-authored-by: becker33 <becker33@users.noreply.github.com>
|
|
|
|
These commands are slated for removal in v0.20
|
|
This PR allows you to do:
```
spack env create -d .
spack -e . add python
spack -e . concretize
spack -e . env depfile -o Makefile
make in<tab> # -> install
make install-<tab> # -> install-deps/
make install-deps/py<tab> # -> install-deps/python-x.y.z-hash
make install/zl<tab> # -> install/zlib-x.y.z-hash
make SP<tab> # -> make SPACK
make SPACK_<tab> # -> make SPACK_INSTALL_FLAGS=
```
|
|
|
|
Environments and environment views have taken over the role of `spack activate/deactivate`, and we should deprecate these commands for several reasons:
- Global activation is a really poor idea:
- Install prefixes should be immutable; since they can have multiple, unrelated dependents; see below
- Added complexity elsewhere: verification of installations, tarballs for build caches, creation of environment views of packages with unrelated extensions "globally activated"... by removing the feature, it gets easier for people to contribute, and we'd end up with fewer bugs due to edge cases.
- Environment accomplish the same thing for non-global "activation" i.e. `spack view`, but better.
Also we write in the docs:
```
However, Spack global activations have two potential drawbacks:
#. Activated packages that involve compiled C extensions may still
need their dependencies to be loaded manually. For example,
``spack load openblas`` might be required to make ``py-numpy``
work.
#. Global activations "break" a core feature of Spack, which is that
multiple versions of a package can co-exist side-by-side. For example,
suppose you wish to run a Python package in two different
environments but the same basic Python --- one with
``py-numpy@1.7`` and one with ``py-numpy@1.8``. Spack extensions
will not support this potential debugging use case.
```
Now that environments are established and views can take over the role of activation
non-destructively, we can remove global activation/deactivation.
|
|
Use at most 32 jobs when available.
|
|
"spack install foo" no longer adds package "foo" to the environment
(i.e. to the list of root specs) by default: you must specify "--add".
Likewise "spack uninstall foo" no longer removes package "foo" from
the environment: you must specify --remove. Generally this means
that install/uninstall commands will no longer modify the users list
of root specs (which many users found problematic: they had to
deactivate an environment if they wanted to uninstall a spec without
changing their spack.yaml description).
In more detail: if you have environments e1 and e2, and specs [P, Q, R]
such that P depends on R, Q depends on R, [P, R] are in e1, and [Q, R]
are in e2:
* `spack uninstall --dependents --remove r` in e1: removes R from e1
(but does not uninstall it) and uninstalls (and removes) P
* `spack uninstall -f --dependents r` in e1: will uninstall P, Q, and
R (i.e. e2 will have dependent specs uninstalled as a side effect)
* `spack uninstall -f --dependents --remove r` in e1: this uninstalls
P, Q, and R, and removes [P, R] from e1
* `spack uninstall -f --remove r` in e1: uninstalls R (so it is
"missing" in both environments) and removes R from e1 (note that e1
would still install R as a dependency of P, but it would no longer
be listed as a root spec)
* `spack uninstall --dependents r` in e1: will fail because e2 needs R
Individual unit tests were created for each of these scenarios.
|
|
* py-transformers: add v4.24.0
* Internet access still required
|
|
|
|
`coverage` sometimes failed to combine, even if there were multiple reports.
|
|
This reverts commit b1559cc831620ee2b2cf8e57fdecc5bb3bf8edfd.
|
|
|
|
* Deprecate spack bootstrap trust/untrust
* Update CI
* Update tests
|
|
|
|
|
|
|