user/lilo: new package

1 files changed, 400 insertions, 0 deletions

diff --git a/user/lilo/adelie.patch b/user/lilo/adelie.patch
new file mode 100644
index 000000000..29983faff
--- /dev/null
+++ b/user/lilo/adelie.patch
@@ -0,0 +1,400 @@
+Adjust paths so that lilo has its own dir in /etc and /boot.
+
+--- lilo-24.2/make.vars	2013-06-07 02:50:30.000000000 -0500
++++ lilo-24.2/make.vars	2020-03-19 15:50:13.710057044 -0500
+@@ -90,8 +90,8 @@ OPT=-Os
+ #
+ 
+ SBIN_DIR=/sbin
+-CFG_DIR=/etc
+-BOOT_DIR=/boot
++CFG_DIR=/etc/lilo
++BOOT_DIR=/boot/lilo
+ USRSBIN_DIR=/usr/sbin
+ BUILTIN=1
+ 
+--- lilo-24.2/src/config.h	2011-06-22 02:13:58.000000000 -0500
++++ lilo-24.2/src/config.h	2020-03-19 15:34:21.320045281 -0500
+@@ -39,8 +39,8 @@
+ #define DFL_CHAIN   LILO_DIR "/chain.b" /* default chain loader */
+ #define DFL_MBR	    LILO_DIR "/mbr.b"	/* default MBR */
+ #else
+-#define CFG_DIR	    "/etc"		/* location of configuration files */
+-#define BOOT_DIR    "/boot"		/* location of boot files */
++#define CFG_DIR	    "/etc/lilo"		/* location of configuration files */
++#define BOOT_DIR    "/boot/lilo"		/* location of boot files */
+ #define BACKUP_DIR  BOOT_DIR /* boot sector and partition table backups */
+ #define DFL_CONFIG  CFG_DIR "/lilo.conf"/* default configuration file */
+ #define DFL_DISKTAB CFG_DIR "/disktab"	/* LILO's disk parameter table */
+--- lilo-24.2/sample/lilo.example.conf	2015-11-20 14:50:03.000000000 -0600
++++ lilo-24.2/sample/lilo.example.conf	2020-03-19 15:53:08.030059197 -0500
+@@ -1,4 +1,4 @@
+-# /etc/lilo.conf  -   systemwide LILO configuration (LILO 24)
++# /etc/lilo/lilo.conf  -   systemwide LILO configuration (LILO 24)
+ # details see in manpages: lilo(8) and lilo.conf(5)
+ 
+ # +-------------------------------------------------------------+
+@@ -50,7 +50,7 @@ root = /dev/sda1
+ # Specifies the location of the map file. Lilo creates the (sector) 
+ # map file of direct sector addresses which are independent of any
+ # filesystem.
+-map = /boot/map
++map = /boot/lilo/map
+ 
+ # ---------------------------------------------------------------
+ 
+@@ -63,7 +63,7 @@ install = menu
+ # A) Customized boot message for choice 'text'.
+ # For the simple text menu you can set an extra message in the 
+ # created file. Its text will be displayed before boot prompt.
+-#message = /boot/message.txt
++#message = /boot/lilo/message.txt
+ 
+ # B) Configuration of the scheme for choice 'menu'.
+ # Use following coding: <text>:<highlight>:<border>:<title>
+@@ -83,7 +83,7 @@ menu-scheme = Wb:Yr:Wb:Wb
+ #   with 16 colors:    onlyblue, tuxlogo, inside
+ #   with 256 colors:   coffee
+ #   for Debian:        debianlilo, debian, debian-de
+-#bitmap = /boot/tuxlogo.bmp
++#bitmap = /boot/lilo/gfx/tuxlogo.bmp
+ 
+ # ---------------------------------------------------------------
+ 
+--- lilo-24.2/scripts/liloconfig	2015-11-21 18:00:21.000000000 -0600
++++ lilo-24.2/scripts/liloconfig	2020-03-19 15:23:42.240037388 -0500
+@@ -44,7 +44,7 @@ getopts('hvfu');
+ pod2usage(1) if $opt_h;
+ 
+ #---- other variables
+-our $liloconf  = "/etc/lilo.conf";
++our $liloconf  = "/etc/lilo/lilo.conf";
+ our $conftmp_1 = "/tmp/lilotmp1";
+ our $conftmp_2 = "/tmp/lilotmp2";
+ our $liloconfold = $liloconf . ".old";
+@@ -54,7 +54,7 @@ our $fstabconf = "/etc/fstab";
+ our $idpath = "/dev/disk/by-id";
+ our $uuidpath = "/dev/disk/by-uuid";
+ our $lblpath = "/dev/disk/by-label";
+-our $template = "/usr/share/doc/lilo/examples/lilo.example.conf.gz";
++our $template = "/etc/lilo/lilo.conf.template";
+ 
+ our $rootpart;    # found root part
+ our $root_dev;    # /dev/hdX9, /dev/sdX9, /dev/md/*
+@@ -399,8 +401,12 @@ sub copy_template {
+ 	
+ 	# copy template config
+ 	if (-f $template) {
+-		system("gzip -d -c $template >$conftmp_1") if ($template =~ /\.gz$/);
+-		system("cat $template >$conftmp_1") if ($template =~ /\.conf$/);
++		if ($template =~ /\.gz$/) {
++			system("gzip -d -c $template >$conftmp_1");
++		}
++		else {
++			system("cat $template >$conftmp_1");
++		}
+ 
+ 		open(CONFTMP1, "<$conftmp_1") or die "$prog: couldn't open $conftmp_1: $!\n";
+ 		open(CONFTMP2, ">$conftmp_2") or die "$prog: couldn't open $conftmp_2: $!\n";
+@@ -418,7 +418,7 @@ sub copy_template {
+ 	}
+ 	else {
+ 		open(CONFTMP2, ">$conftmp_2") or die "$prog: couldn't open $conftmp_2: $!\n";
+-		print CONFTMP2 "# /etc/lilo.conf
++		print CONFTMP2 "# /etc/lilo/lilo.conf
+ 
+ ### LILO global section ###
+ 
+@@ -426,7 +426,7 @@ sub copy_template {
+ lba32
+ boot = /dev/sda
+ root = /dev/sda1
+-map = /boot/map
++map = /boot/lilo/map
+ install = menu
+ menu-scheme = Wb:Yr:Wb:Wb
+ prompt
+@@ -781,7 +781,7 @@ lilo.conf file you find many useful comm
+ Please pay attention about error messages if liloconfig cannot find
+ any images (/boot/vmlinuz*) oder image symlinks (/vmlinuz, /vmlinu.old).
+ Then you need to search for images by ourself and make some changes
+-in the '/etc/lilo.conf' file. Otherwise no bootloader can be installed
++in the '/etc/lilo/lilo.conf' file. Otherwise no bootloader can be installed
+ with '/sbin/lilo'.
+ 
+ =head1 OPTIONS
+@@ -808,7 +808,7 @@ Force overriding/update of boot line in
+ 
+ =head1 EXAMPLES
+ 
+-Lines in the configuration file /etc/lilo.conf:
++Lines in the configuration file /etc/lilo/lilo.conf:
+ 
+   ### LILO global section ###
+ 
+@@ -818,7 +818,7 @@ Lines in the configuration file /etc/lil
+   boot = /dev/disk/by-id/ata-SAMSUNG_SV1604N_S01FJ10X999999
+   #root = /dev/sda1
+   root = "UUID=18843936-00f9-4df0-a373-000d05a5dd44"
+-  map = /boot/map
++  map = /boot/lilo/map
+   install = menu
+   menu-scheme = Wb:Yr:Wb:Wb
+   prompt
+--- lilo-24.2/scripts/lilo-uuid-diskid	2014-10-16 16:53:29.000000000 -0500
++++ lilo-24.2/scripts/lilo-uuid-diskid	2020-03-19 15:28:07.360040662 -0500
+@@ -1,7 +1,7 @@
+ #!/usr/bin/perl -w
+ 
+ #       lilo-uuid-diskid - convert boot and root options to diskid
+-#                          and uuid in /etc/lilo.conf
++#                          and uuid in /etc/lilo/lilo.conf
+ #
+ #       Copyright 2010-2014 Joachim Wiedorn <joodevel at joonet.de>
+ #       
+@@ -41,7 +41,7 @@ getopts('hv');
+ pod2usage(1) if $opt_h;
+ 
+ #---- other variables
+-our $liloconf = "/etc/lilo.conf";
++our $liloconf = "/etc/lilo/lilo.conf";
+ our $liloconfold = $liloconf . ".old";
+ our $liloconfnew = $liloconf . ".new";
+ our $fstabconf = "/etc/fstab";
+@@ -454,7 +454,7 @@ Print verbose messages.
+ 
+ =head1 EXAMPLES
+ 
+-Lines in the configuration file /etc/lilo.conf:
++Lines in the configuration file /etc/lilo/lilo.conf:
+ 
+   #boot = /dev/sda
+   boot = /dev/disk/by-id/ata-SAMSUNG_SV1604N_S01FJ10X999999
+--- lilo-24.2/man/keytab-lilo.8	2010-06-28 15:41:18.000000000 -0500
++++ lilo-24.2/man/keytab-lilo.8	2020-03-19 16:01:06.730065109 -0500
+@@ -37,7 +37,7 @@ to set the keyboard type when booting
+ [using the 
+ .B keytable
+ parameter in
+-.BR /etc/lilo.conf ].
++.BR /etc/lilo/lilo.conf ].
+ 
+ .I kbd_layout
+ should be the name of a map file which specifies the desired 
+@@ -68,7 +68,7 @@ output, so you should redirect it to a s
+ .B lilo
+ has no particular restrictions on the name of keyboard translation
+ files, but the suggested naming convention and location is
+-.BI /boot/ mapping .ktl
++.BI /boot/lilo/ mapping .ktl
+ (where
+ .B .ktl
+ stands for "Keyboard Table for Lilo").
+@@ -86,11 +86,11 @@ respectively.
+ 
+ .SH "EXAMPLES"
+ .TP 
+-.B keytab\-lilo dvorak >/boot/dvorak.ktl
++.B keytab\-lilo dvorak >/boot/lilo/dvorak.ktl
+ 
+ This is the most common form of invocation; it simply compiles the
+ given map file (in this case dvorak) and puts the result in
+-.BR /boot/dvorak.ktl .
++.BR /boot/lilo/dvorak.ktl .
+ 
+ .SH "AUTHOR"
+ Werner Almesberger (almesber@bernina.ethz.ch).
+--- lilo-24.2/man/lilo-uuid-diskid.8	2015-11-21 17:25:42.000000000 -0600
++++ lilo-24.2/man/lilo-uuid-diskid.8	2020-03-19 15:59:05.390063610 -0500
+@@ -100,7 +100,7 @@ Print a brief help.
+ Print verbose messages.
+ .SH "EXAMPLES"
+ .IX Header "EXAMPLES"
+-Lines in the configuration file /etc/lilo.conf:
++Lines in the configuration file /etc/lilo/lilo.conf:
+ .PP
+ .Vb 2
+ \&  #boot = /dev/sda
+--- lilo-24.2/man/lilo.8	2015-11-21 17:25:31.000000000 -0600
++++ lilo-24.2/man/lilo.8	2020-03-19 16:01:39.580065515 -0500
+@@ -108,7 +108,7 @@ Auxiliary uses:
+ .SH "DESCRIPTION"
+ .IX Header "DESCRIPTION"
+ lilo installs a boot loader that will be activated the next time you boot
+-your system. The default configuration file \fI/etc/lilo.conf\fR (see manpage
++your system. The default configuration file \fI/etc/lilo/lilo.conf\fR (see manpage
+ \&\fIlilo.conf\fR\|(5)) will contain most options, but many, including those which
+ override the configuration file, may be specified  on the command line.
+ .SH "OPTIONS"
+@@ -140,7 +140,7 @@ Speeds up the booting especially from fl
+ .IP "\fB\-C\fR \fIconfig-file\fR" 4
+ .IX Item "-C config-file"
+ Set another pathname and filename for the configuration file. The default
+-configuration file is \fI/etc/lilo.conf\fR.
++configuration file is \fI/etc/lilo/lilo.conf\fR.
+ .IP "\fB\-d\fR \fIdelay-time\fR" 4
+ .IX Item "-d delay-time"
+ Set the delay time in tenths of a second ('20' = 2 sec) before automatically
+@@ -171,7 +171,7 @@ header will be lost. It can be restored
+ a text-based backup for the \s-1LILO\s0 header information.
+ .IP "\fB\-f\fR \fIdisk-tab\fR" 4
+ .IX Item "-f disk-tab"
+-Set another disk geometry parameter file. The default is \fI/etc/disktab\fR.
++Set another disk geometry parameter file. The default is \fI/etc/lilo/disktab\fR.
+ .IP "\fB\-F\fR" 4
+ .IX Item "-F"
+ Override boot sector check for filesystems (e.g., swap, ext4, xfs ...) which
+@@ -204,7 +204,7 @@ addresses, allowing access to all partit
+ (This is the default geometry).
+ .IP "\fB\-m\fR \fImap-file\fR" 4
+ .IX Item "-m map-file"
+-Use another map file instead of the default file /boot/map.
++Use another map file instead of the default file /boot/lilo/map.
+ .IP "\fB\-M\fR \fImaster-device\fR \fB{mbr|ext}\fR" 4
+ .IX Item "-M master-device {mbr|ext}"
+ Install a Master Boot Record on the device specified as master-device, selecting
+@@ -232,7 +232,7 @@ sector. Compare with the '\-F' flag, whi
+ boot sector.
+ .Sp
+ \&\fB<global\-option>\fR allows the passing of any global option which may
+-appear in the global section (top) of the  configuration file (\fI/etc/lilo.conf\fR).
++appear in the global section (top) of the  configuration file (\fI/etc/lilo/lilo.conf\fR).
+ For instance \fI'\-P nowarn'\fR will pass the 'nowarn' option, just as though 'nowarn'
+ appeared in the configuration file (same as the '\-w' switch).  Similarly
+ \&\fI'\-P timeout=50'\fR will add or override the 'timeout=' line in the  configuration
+@@ -241,7 +241,7 @@ line option switches. However, it is not
+ cause an override of other options; e.g. '\-g' (\-P geometric), '\-L' (\-P lba32).
+ .IP "\fB\-q\fR" 4
+ .IX Item "-q"
+-List the currently mapped files. \fBlilo\fR maintains a file, by default \fI/boot/map\fR,
++List the currently mapped files. \fBlilo\fR maintains a file, by default \fI/boot/lilo/map\fR,
+ containing each name and location of the kernel(s) to boot. This option will list
+ the names therein.  Use with \fB\-v\fR for more detailed information about the
+ installed boot loader.
+@@ -249,7 +249,7 @@ installed boot loader.
+ .IX Item "-r root-directory"
+ Before doing anything else, do a \fI'chroot'\fR to the indicated directory. The new
+ root directory must contain a \fI/dev\fR directory and may need a /boot directory.
+-It may also need an \fI/etc/lilo.conf\fR file.
++It may also need an \fI/etc/lilo/lilo.conf\fR file.
+ .IP "\fB\-R\fR \fIcommand-line\fR" 4
+ .IX Item "-R command-line"
+ This  option sets the default command for the boot loader for the next time it
+@@ -267,13 +267,13 @@ Refer to \fI\fIlilo.conf\fI\|(5)\fR for
+ .IP "\fB\-s\fR \fIsave-file\fR" 4
+ .IX Item "-s save-file"
+ When lilo writes a new boot sector, it preserves the former contents of the boot
+-sector in a file, named by default /boot/boot.NNNN, where \s-1NNNN\s0 is the hexadecimal
++sector in a file, named by default /boot/lilo/boot.NNNN, where \s-1NNNN\s0 is the hexadecimal
+ representation of the major and minor device numbers of the drive/partition.
+ .Sp
+ This option defines the backup save file in one of three ways: a save directory
+-(default is '/boot') using the default filename 'boot.NNNN' in the defined
++(default is '/boot/lilo') using the default filename 'boot.NNNN' in the defined
+ directory; a pathname template to which '.NNNN' is appended (default would be
+-\&'/boot/boot'); or the full pathname of the file, which must include the correct
++\&'/boot/lilo/boot'); or the full pathname of the file, which must include the correct
+ \&'.NNNN' suffix. When used with the \-u option, the full file pathname must be set.
+ .IP "\fB\-S\fR \fIsave-file\fR" 4
+ .IX Item "-S save-file"
+@@ -386,7 +386,7 @@ removed from the command line before it
+ noted.
+ .IP "\fBlock\fR" 4
+ .IX Item "lock"
+-Locks the command line, as though 'lock' had been defined in \fI/etc/lilo.conf\fR.
++Locks the command line, as though 'lock' had been defined in \fI/etc/lilo/lilo.conf\fR.
+ .IP "\fBmem=###[,K,M,G]\fR" 4
+ .IX Item "mem=###[,K,M,G]"
+ Set the maximum memory in the system in bytes, kilobytes, megabytes or gigabytes.
+--- lilo-24.2/man/lilo.conf.5	2013-06-07 14:17:39.000000000 -0500
++++ lilo-24.2/man/lilo.conf.5	2020-03-19 16:01:57.970065742 -0500
+@@ -25,13 +25,13 @@ lilo.conf \- configuration file for lilo
+ .SH DESCRIPTION
+ .LP
+ This file, by default
+-.IR /etc/lilo.conf ,
++.IR /etc/lilo/lilo.conf ,
+ is read by the boot loader installer 'lilo' (see lilo(8)).
+ .LP
+ It might look as follows:
+ .IP
+ .nf
+-# /etc/lilo.conf
++# /etc/lilo/lilo.conf
+ #
+ #  global options:
+ boot=/dev/hda
+@@ -111,7 +111,7 @@ All RAID installations should use only t
+ multiple backups may be created.  The '.NNNN' suffix is the hexadecimal
+ representation of the major and minor device numbers of the device or
+ partition. If this option is not specified, the default name of boot sector
+-backups is '/boot/boot.NNNN'. If a backup already exists, it will be
++backups is '/boot/lilo/boot.NNNN'. If a backup already exists, it will be
+ preserved, rather than overwritten.  C.f., \fBforce-backup=\fP below.
+ .TP
+ .BI "bios-passes-dl=" <option>
+@@ -334,7 +334,7 @@ viz.,
+ .BI "disktab=" <disktab-file>
+ Specifies the name of the disk parameter table.
+ The map installer looks for
+-.I /etc/disktab
++.I /etc/lilo/disktab
+ if `disktab' is omitted. The use of disktabs is discouraged.
+ .TP
+ .BI "el-torito-bootable-CD"
+@@ -436,7 +436,7 @@ The per-image password option `mandatory
+ .TP
+ .BI "map=" <map-file>
+ Specifies the location of the map file. If `map' is omitted, the file
+-.I /boot/map
++.I /boot/lilo/map
+ is used.
+ 
+ On machines with a pre-1998 BIOS, the EDD bios extensions which are required
+@@ -812,7 +812,7 @@ requirements of the boot-installer parse
+ an operator.  The kernel command line parser is very much simpler, and
+ must not see any quotation marks.  Simply stated, only use the quotation
+ marks within
+-.IR /etc/lilo.conf .
++.IR /etc/lilo/lilo.conf .
+ .TP
+ .BI "vga=" <mode>
+ This specifies the VGA text mode that should be selected when 
+@@ -1027,7 +1027,7 @@ at the time the boot loader is installed
+ the password, it should be specified: \fBpassword=""\fP.
+ Passwords entered interactively are not required to be entered again if the
+ boot installer is re-run. They are cached, in hashed form, in a companion
+-file to the config-file, default name: \fB/etc/lilo.conf.crc\fP. If the 
++file to the config-file, default name: \fB/etc/lilo/lilo.conf.crc\fP. If the 
+ config-file is updated, a warning message
+ will be issued telling you to re-run \fIlilo \-p\fP to force re-creation of the
+ password cache file.
+--- lilo-24.2/man/liloconfig.8	2015-11-21 17:25:48.000000000 -0600
++++ lilo-24.2/man/liloconfig.8	2020-03-19 16:02:08.680065874 -0500
+@@ -92,7 +92,7 @@ lilo.conf file you find many useful comm
+ Please pay attention about error messages if liloconfig cannot find
+ any images (/boot/vmlinuz*) oder image symlinks (/vmlinuz, /vmlinu.old).
+ Then you need to search for images by ourself and make some changes
+-in the '/etc/lilo.conf' file. Otherwise no bootloader can be installed
++in the '/etc/lilo/lilo.conf' file. Otherwise no bootloader can be installed
+ with '/sbin/lilo'.
+ .SH "OPTIONS"
+ .IX Header "OPTIONS"
+@@ -110,7 +110,7 @@ Force overriding existing lilo.conf.
+ Force overriding/update of boot line in lilo.conf.
+ .SH "EXAMPLES"
+ .IX Header "EXAMPLES"
+-Lines in the configuration file /etc/lilo.conf:
++Lines in the configuration file /etc/lilo/lilo.conf:
+ .PP
+ .Vb 1
+ \&  ### LILO global section ###
+@@ -121,7 +121,7 @@ Lines in the configuration file /etc/lil
+ \&  boot = /dev/disk/by\-id/ata\-SAMSUNG_SV1604N_S01FJ10X999999
+ \&  #root = /dev/sda1
+ \&  root = "UUID=18843936\-00f9\-4df0\-a373\-000d05a5dd44"
+-\&  map = /boot/map
++\&  map = /boot/lilo/map
+ \&  install = menu
+ \&  menu\-scheme = Wb:Yr:Wb:Wb
+ \&  prompt