Spack updates to three Krell packages (#4765)

* Update the krell institute products to use the latest features of spack for building on cluster platforms.

* Address travis error messages and resubmit the pull request.

* Update the contents of openspeedshop package.py so it passes the flake8 tests.

* Fix flake8 error-whitespack issue in mrnet package.py file.

* Add updates based on spack reviewer feedback.

* More fixes based on comments from reviewers.  Switch using extend to using append, remove additional setting of PATH and LD_LIBRARY_PATH that should not be required due to RPATH.

* More review related changes.  Update MPIOption.append lines and take out xercesc references.

* Create a base options function for common openspeedshop base cmake options to reduce redundencies.

* Add libxml2+python depends on to get around issues with the libxml2 package file.

* Using boost over 1.60.0 causes compile errors.  This is a known boost bug. Also, dyninst-9.2.0 is set to be the vesrion of dyninst to use with OSS, as of now. The newer version fails to build.

* Fix bad syntax in specifying the boost version range.

* Update the version numbers for the krell institute components and tools: cbtf and openspeedshop.

* Do not build glib for qt3, it is not needed and causes build problems at this time anyway.

* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.

* Update the fix for qt3 build by setting LD_LIBRARY_PATH instead of checking for whether it is set or not per Adams comment that spack clears LD_LIBRARY_PATH.

* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.

* Trim comments to fit more concisely.

* Fix tabs versus spaces and swap if and else clause check from a negative to a positive check.

* Fix issues with the cbtf-argonavis build, update to use dyninst-9.3.2, fixes to openspeedshop package build.

* Fix issues with the cbtf-argonavis package.py files related to comments.

* Add changes for changing the krell packages from Package to CMakePackage.

* Add better changes for changing the krell packages from Package to CMakePackage.

* Add more modifications for changing the krell packages from Package to CMakePackage.

* Add additional modifications for changing the krell packages from Package to CMakePackage and fixing Travis erros

* Fix new travis errors.

* Fix new travis errors.

* Add more changes for PR 4765.

* Add more refinements to the conversion from Package to CMakePackage.

* Fix new travis errors.

* Add dependencies for MPI to be passed to cbtf-krell, so it can build the MPI collectors requested by the builder of openspeedshop.

* Remove extra unnecessary routine to adjust build arguments. Fix if-else clause issue.

* Fix more flake issues caused by last changes.

5 files changed, 242 insertions, 558 deletions

diff --git a/var/spack/repos/builtin/packages/cbtf-argonavis/package.py b/var/spack/repos/builtin/packages/cbtf-argonavis/package.py
index 9b4439f6b6..2c1c663639 100644
--- a/var/spack/repos/builtin/packages/cbtf-argonavis/package.py
+++ b/var/spack/repos/builtin/packages/cbtf-argonavis/package.py
@@ -1,5 +1,5 @@
 ##############################################################################
-# Copyright (c) 2013-2016, Lawrence Livermore National Security, LLC.
+# Copyright (c) 2013-2017, Lawrence Livermore National Security, LLC.
 # Produced at the Lawrence Livermore National Laboratory.
 #
 # This file is part of Spack.
@@ -23,7 +23,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 ##############################################################################
 ##########################################################################
-# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved.
+# Copyright (c) 2015-2017 Krell Institute. All Rights Reserved.
 #
 # This program is free software; you can redistribute it and/or modify it under
 # the terms of the GNU General Public License as published by the Free Software
@@ -43,17 +43,13 @@
 from spack import *
 
 
-class CbtfArgonavis(Package):
+class CbtfArgonavis(CMakePackage):
     """CBTF Argo Navis project contains the CUDA collector and supporting
        libraries that was done as a result of a DOE SBIR grant.
 
     """
     homepage = "http://sourceforge.net/p/cbtf/wiki/Home/"
 
-    # Mirror access template example
-    # url = "file:/home/jeg/OpenSpeedShop_ROOT/SOURCES/cbtf-argonavis-1.6.tar.gz"
-    # version('1.6', '0fafa0008478405c2c2319450f174ed4')
-
     version('1.8', branch='master',
             git='https://github.com/OpenSpeedShop/cbtf-argonavis.git')
 
@@ -67,73 +63,30 @@ class CbtfArgonavis(Package):
 
     parallel = False
 
-    def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions):
-        # Sets build type parameters into cmakeOptions the options that will
-        # enable the cbtf-krell built type settings
+    build_directory = 'build_cbtf_argonavis'
+
+    def build_type(self):
+        return 'None'
 
+    def cmake_args(self):
+        spec = self.spec
         compile_flags = "-O2 -g"
-        BuildTypeOptions = []
 
-        # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the
-        # stdcmakeargs
-        for word in cmakeOptions[:]:
-            if word.startswith('-DCMAKE_BUILD_TYPE'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_CXX_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_C_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_VERBOSE_MAKEFILE'):
-                cmakeOptions.remove(word)
-        BuildTypeOptions.extend([
-            '-DCMAKE_VERBOSE_MAKEFILE=ON',
-            '-DCMAKE_BUILD_TYPE=None',
+        cmake_args = [
             '-DCMAKE_CXX_FLAGS=%s'         % compile_flags,
-            '-DCMAKE_C_FLAGS=%s'           % compile_flags
-        ])
-
-        cmakeOptions.extend(BuildTypeOptions)
-
-    def install(self, spec, prefix):
-
-        # Look for package installation information in the cbtf and cbtf-krell
-        # prefixes
-        cmake_prefix_path = join_path(
-            spec['cbtf'].prefix) + ':' + join_path(spec['cbtf-krell'].prefix)
-
-        with working_dir('CUDA'):
-            with working_dir('build', create=True):
-
-                cmakeOptions = []
-                cmakeOptions.extend(
-                    ['-DCMAKE_INSTALL_PREFIX=%s' % prefix,
-                     '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path,
-                     '-DCUDA_DIR=%s' % spec['cuda'].prefix,
-                     '-DCUDA_INSTALL_PATH=%s' % spec['cuda'].prefix,
-                     '-DCUDA_TOOLKIT_ROOT_DIR=%s' % spec['cuda'].prefix,
-                     '-DCUPTI_DIR=%s' % join_path(
-                         spec['cuda'].prefix + '/extras/CUPTI'),
-                     '-DCUPTI_ROOT=%s' % join_path(
-                         spec['cuda'].prefix + '/extras/CUPTI'),
-                     '-DPAPI_ROOT=%s' % spec['papi'].prefix,
-                     '-DCBTF_DIR=%s' % spec['cbtf'].prefix,
-                     '-DCBTF_KRELL_DIR=%s' % spec['cbtf-krell'].prefix,
-                     '-DBOOST_ROOT=%s' % spec['boost'].prefix,
-                     '-DBoost_DIR=%s' % spec['boost'].prefix,
-                     '-DBOOST_LIBRARYDIR=%s' % spec['boost'].prefix.lib,
-                     '-DMRNET_DIR=%s' % spec['mrnet'].prefix,
-                     '-DBoost_NO_SYSTEM_PATHS=ON'])
-
-                # Add in the standard cmake arguments
-                cmakeOptions.extend(std_cmake_args)
-
-                # Adjust the standard cmake arguments to what we want the build
-                # type, etc to be
-                self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                # Invoke cmake
-                cmake('..', *cmakeOptions)
-
-                make("clean")
-                make()
-                make("install")
+            '-DCMAKE_C_FLAGS=%s'           % compile_flags,
+            '-DCUDA_DIR=%s' % spec['cuda'].prefix,
+            '-DCUDA_INSTALL_PATH=%s' % spec['cuda'].prefix,
+            '-DCUDA_TOOLKIT_ROOT_DIR=%s' % spec['cuda'].prefix,
+            '-DCUPTI_DIR=%s' % spec['cuda'].prefix.extras.CUPTI,
+            '-DCUPTI_ROOT=%s' % spec['cuda'].prefix.extras.CUPTI,
+            '-DPAPI_ROOT=%s' % spec['papi'].prefix,
+            '-DCBTF_DIR=%s' % spec['cbtf'].prefix,
+            '-DCBTF_KRELL_DIR=%s' % spec['cbtf-krell'].prefix,
+            '-DBOOST_ROOT=%s' % spec['boost'].prefix,
+            '-DBoost_DIR=%s' % spec['boost'].prefix,
+            '-DBOOST_LIBRARYDIR=%s' % spec['boost'].prefix.lib,
+            '-DMRNET_DIR=%s' % spec['mrnet'].prefix,
+            '-DBoost_NO_SYSTEM_PATHS=ON']
+
+        return cmake_args
diff --git a/var/spack/repos/builtin/packages/cbtf-krell/package.py b/var/spack/repos/builtin/packages/cbtf-krell/package.py
index 0114ad4e4a..a90ea74f9d 100644
--- a/var/spack/repos/builtin/packages/cbtf-krell/package.py
+++ b/var/spack/repos/builtin/packages/cbtf-krell/package.py
@@ -1,5 +1,5 @@
 ##############################################################################
-# Copyright (c) 2013-2016, Lawrence Livermore National Security, LLC.
+# Copyright (c) 2013-2017, Lawrence Livermore National Security, LLC.
 # Produced at the Lawrence Livermore National Laboratory.
 #
 # This file is part of Spack.
@@ -23,7 +23,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 ##############################################################################
 ##########################################################################
-# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved.
+# Copyright (c) 2015-2017 Krell Institute. All Rights Reserved.
 #
 # This program is free software; you can redistribute it and/or modify it under
 # the terms of the GNU General Public License as published by the Free Software
@@ -43,7 +43,7 @@
 from spack import *
 
 
-class CbtfKrell(Package):
+class CbtfKrell(CMakePackage):
     """CBTF Krell project contains the Krell Institute contributions to the
        CBTF project.  These contributions include many performance data
        collectors and support libraries as well as some example tools
@@ -52,10 +52,6 @@ class CbtfKrell(Package):
     """
     homepage = "http://sourceforge.net/p/cbtf/wiki/Home/"
 
-    # optional mirror access template
-    # url      = "file:/home/jeg/cbtf-krell-1.6.tar.gz"
-    # version('1.6', 'edeb61cd488f16e7b124f77db9ce762d')
-
     version('1.8', branch='master',
             git='https://github.com/OpenSpeedShop/cbtf-krell.git')
 
@@ -81,7 +77,7 @@ class CbtfKrell(Package):
 
     # collectionTool
     depends_on("boost@1.50.0:1.59.0")
-    depends_on("dyninst@9.2.0")
+    depends_on("dyninst@9.3.2")
     depends_on("mrnet@5.0.1:+lwthreads")
 
     depends_on("xerces-c@3.1.1:")
@@ -104,31 +100,7 @@ class CbtfKrell(Package):
 
     parallel = False
 
-    def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions):
-        # Sets build type parameters into cmakeOptions the options that will
-        # enable the cbtf-krell built type settings
-
-        compile_flags = "-O2 -g"
-        BuildTypeOptions = []
-        # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the
-        # stdcmakeargs
-        for word in cmakeOptions[:]:
-            if word.startswith('-DCMAKE_BUILD_TYPE'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_CXX_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_C_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_VERBOSE_MAKEFILE'):
-                cmakeOptions.remove(word)
-        BuildTypeOptions.extend([
-            '-DCMAKE_VERBOSE_MAKEFILE=ON',
-            '-DCMAKE_BUILD_TYPE=None',
-            '-DCMAKE_CXX_FLAGS=%s'         % compile_flags,
-            '-DCMAKE_C_FLAGS=%s'           % compile_flags
-        ])
-
-        cmakeOptions.extend(BuildTypeOptions)
+    build_directory = 'build_cbtf_krell'
 
     def set_mpi_cmakeOptions(self, spec, cmakeOptions):
         # Appends to cmakeOptions the options that will enable the appropriate
@@ -157,135 +129,30 @@ class CbtfKrell(Package):
 
         cmakeOptions.extend(MPIOptions)
 
-    def install(self, spec, prefix):
-
-        # Add in paths for finding package config files that tell us
-        # where to find these packages
-        # cmake_prefix_path = \
-        #     join_path(spec['cbtf'].prefix) + ':' + \
-        #     join_path(spec['dyninst'].prefix)
-        # '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path
-
-        # Build cbtf-krell with cmake
-        with working_dir('build_cbtf_krell', create=True):
-            cmakeOptions = []
-            cmakeOptions.extend(
-                ['-DCMAKE_INSTALL_PREFIX=%s' % prefix,
-                 '-DCBTF_DIR=%s' % spec['cbtf'].prefix,
-                 '-DBINUTILS_DIR=%s' % spec['binutils'].prefix,
-                 '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix,
-                 '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix,
-                 '-DPAPI_DIR=%s' % spec['papi'].prefix,
-                 '-DBOOST_DIR=%s' % spec['boost'].prefix,
-                 '-DMRNET_DIR=%s' % spec['mrnet'].prefix,
-                 '-DDYNINST_DIR=%s' % spec['dyninst'].prefix,
-                 '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix])
-
-            # Add any MPI implementations coming from variant settings
-            self.set_mpi_cmakeOptions(spec, cmakeOptions)
-
-            # Add in the standard cmake arguments
-            cmakeOptions.extend(std_cmake_args)
-
-            # Adjust the standard cmake arguments to what we want the build
-            # type, etc to be
-            self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
+    def build_type(self):
+        return 'None'
 
-            # Invoke cmake
-            cmake('..', *cmakeOptions)
+    def cmake_args(self):
+        spec = self.spec
 
-            make("clean")
-            make()
-            make("install")
+        compile_flags = "-O2 -g"
 
-        # if '+cray' in spec:
-        # if 'cray' in self.spec.architecture:
-        #    if '+runtime' in spec:
-        #        with working_dir('build_cbtf_cray_runtime', create=True):
-        #            python_vers='%d.%d' % spec['python'].version[:2]
-        #            cmake .. \
-        #                -DCMAKE_BUILD_TYPE=Debug \
-        #                -DTARGET_OS="cray" \
-        #                -DRUNTIME_ONLY="true" \
-        #                -DCMAKE_INSTALL_PREFIX=${CBTF_KRELL_PREFIX} \
-        #                -DCMAKE_PREFIX_PATH=${CBTF_ROOT} \
-        #                -DCBTF_DIR=${CBTF_ROOT} \
-        #                -DBOOST_ROOT=${BOOST_INSTALL_PREFIX} \
-        #                -DXERCESC_DIR=${XERCESC_INSTALL_PREFIX} \
-        #                -DBINUTILS_DIR=${KRELL_ROOT} \
-        #                -DLIBMONITOR_DIR=${KRELL_ROOT_COMPUTE} \
-        #                -DLIBUNWIND_DIR=${KRELL_ROOT_COMPUTE} \
-        #                -DPAPI_DIR=${PAPI_ROOT} \
-        #                -DDYNINST_DIR=${DYNINST_CN_ROOT} \
-        #                -DMRNET_DIR=${MRNET_INSTALL_PREFIX} \
-        #                -DMPICH2_DIR=/opt/cray/mpt/7.0.1/gni/mpich2-gnu/48
-        #    else:
-        #        with working_dir('build_cbtf_cray_frontend', create=True):
-        #            python_vers='%d.%d' % spec['python'].version[:2]
-        #            cmake .. \
-        #            -DCMAKE_BUILD_TYPE=Debug \
-        #            -DCMAKE_INSTALL_PREFIX=${CBTF_KRELL_PREFIX} \
-        #            -DCMAKE_PREFIX_PATH=${CBTF_ROOT} \
-        #            -DCBTF_DIR=${CBTF_ROOT} \
-        #            -DRUNTIME_TARGET_OS="cray" \
-        #          -DCBTF_KRELL_CN_RUNTIME_DIR=${CBTF_KRELL_CN_RUNTIME_ROOT} \
-        #            -DCBTF_CN_RUNTIME_DIR=${CBTF_CN_RUNTIME_ROOT} \
-        #            -DLIBMONITOR_CN_RUNTIME_DIR=${LIBMONITOR_CN_ROOT} \
-        #            -DLIBUNWIND_CN_RUNTIME_DIR=${LIBUNWIND_CN_ROOT} \
-        #            -DPAPI_CN_RUNTIME_DIR=${PAPI_CN_ROOT} \
-        #            -DXERCESC_CN_RUNTIME_DIR=/${XERCESC_CN_ROOT} \
-        #            -DMRNET_CN_RUNTIME_DIR=${MRNET_CN_ROOT} \
-        #            -DBOOST_CN_RUNTIME_DIR=${BOOST_CN_ROOT} \
-        #            -DDYNINST_CN_RUNTIME_DIR=${DYNINST_CN_ROOT} \
-        #            -DBOOST_ROOT=/${KRELL_ROOT} \
-        #            -DXERCESC_DIR=/${KRELL_ROOT} \
-        #            -DBINUTILS_DIR=/${KRELL_ROOT} \
-        #            -DLIBMONITOR_DIR=${KRELL_ROOT} \
-        #            -DLIBUNWIND_DIR=${KRELL_ROOT} \
-        #            -DPAPI_DIR=${PAPI_ROOT} \
-        #            -DDYNINST_DIR=${KRELL_ROOT} \
-        #            -DMRNET_DIR=${KRELL_ROOT} \
-        #            -DMPICH2_DIR=/opt/cray/mpt/7.0.1/gni/mpich2-gnu/48
-        #    fi
-#
-#                    make("clean")
-#                    make()
-#                    make("install")
-#
-#        elif '+mic' in spec:
-#            if '+runtime' in spec:
-#                with working_dir('build_cbtf_mic_runtime', create=True):
-#                    python_vers='%d.%d' % spec['python'].version[:2]
-#                    cmake .. \
-#
-#            else:
-#                with working_dir('build_cbtf_cray_frontend', create=True):
-#                    python_vers='%d.%d' % spec['python'].version[:2]
-#                    cmake .. \
-#            fi
-#
-#        else:
-#            # Build cbtf-krell with cmake
-#            with working_dir('build_cbtf_krell', create=True):
-#                cmake('..',
-#                      '-DCMAKE_BUILD_TYPE=Debug',
-#                      '-DCMAKE_INSTALL_PREFIX=%s' % prefix,
-#                      '-DCBTF_DIR=%s' % spec['cbtf'].prefix,
-#                      '-DBINUTILS_DIR=%s' % spec['binutils'].prefix,
-#                      '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix,
-#                      '-DLIBUNWIND_DIR=%s'% spec['libunwind'].prefix,
-#                      '-DPAPI_DIR=%s' % spec['papi'].prefix,
-#                      '-DBOOST_DIR=%s' % spec['boost'].prefix,
-#                      '-DMRNET_DIR=%s' % spec['mrnet'].prefix,
-#                      '-DDYNINST_DIR=%s' % spec['dyninst'].prefix,
-#                      '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix,
-#                      '-DOPENMPI_DIR=%s' % openmpi_prefix_path,
-#                      '-DCMAKE_PREFIX_PATH=%s' % cmake_prefix_path,
-#                      *std_cmake_args)
-#
-#                make("clean")
-#                make()
-#                make("install")
-#
-#        fi
-#
+        # Add in paths for finding package config files that tell us
+        # where to find these packages
+        cmake_args = [
+            '-DCMAKE_CXX_FLAGS=%s'         % compile_flags,
+            '-DCMAKE_C_FLAGS=%s'           % compile_flags,
+            '-DCBTF_DIR=%s' % spec['cbtf'].prefix,
+            '-DBINUTILS_DIR=%s' % spec['binutils'].prefix,
+            '-DLIBMONITOR_DIR=%s' % spec['libmonitor'].prefix,
+            '-DLIBUNWIND_DIR=%s' % spec['libunwind'].prefix,
+            '-DPAPI_DIR=%s' % spec['papi'].prefix,
+            '-DBOOST_DIR=%s' % spec['boost'].prefix,
+            '-DMRNET_DIR=%s' % spec['mrnet'].prefix,
+            '-DDYNINST_DIR=%s' % spec['dyninst'].prefix,
+            '-DXERCESC_DIR=%s' % spec['xerces-c'].prefix]
+
+        # Add any MPI implementations coming from variant settings
+        self.set_mpi_cmakeOptions(spec, cmake_args)
+
+        return cmake_args
diff --git a/var/spack/repos/builtin/packages/cbtf-lanl/package.py b/var/spack/repos/builtin/packages/cbtf-lanl/package.py
index a2a258be3a..6ffca1f8b1 100644
--- a/var/spack/repos/builtin/packages/cbtf-lanl/package.py
+++ b/var/spack/repos/builtin/packages/cbtf-lanl/package.py
@@ -1,5 +1,5 @@
 ##############################################################################
-# Copyright (c) 2013-2016, Lawrence Livermore National Security, LLC.
+# Copyright (c) 2013-2017, Lawrence Livermore National Security, LLC.
 # Produced at the Lawrence Livermore National Laboratory.
 #
 # This file is part of Spack.
@@ -23,7 +23,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 ##############################################################################
 ##########################################################################
-# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved.
+# Copyright (c) 2015-2017 Krell Institute. All Rights Reserved.
 #
 # This program is free software; you can redistribute it and/or modify it under
 # the terms of the GNU General Public License as published by the Free Software
@@ -43,15 +43,11 @@
 from spack import *
 
 
-class CbtfLanl(Package):
+class CbtfLanl(CMakePackage):
     """CBTF LANL project contains a memory tool and data center type system
        command monitoring tool."""
     homepage = "http://sourceforge.net/p/cbtf/wiki/Home/"
 
-    # Mirror access template example
-    # url      = "file:/g/g24/jeg/cbtf-lanl-1.6.tar.gz"
-    # version('1.6', 'c3f78f967b0a42c6734ce4be0e602426')
-
     version('1.8', branch='master',
             git='http://git.code.sf.net/p/cbtf-lanl/cbtf-lanl')
 
@@ -64,61 +60,24 @@ class CbtfLanl(Package):
 
     parallel = False
 
-    def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions):
-        # Sets build type parameters into cmakeOptions the options that will
-        # enable the cbtf-krell built type settings
-
-        compile_flags = "-O2 -g"
-        BuildTypeOptions = []
-        # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the
-        # stdcmakeargs
-        for word in cmakeOptions[:]:
-            if word.startswith('-DCMAKE_BUILD_TYPE'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_CXX_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_C_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_VERBOSE_MAKEFILE'):
-                cmakeOptions.remove(word)
-        BuildTypeOptions.extend([
-            '-DCMAKE_VERBOSE_MAKEFILE=ON',
-            '-DCMAKE_BUILD_TYPE=None',
-            '-DCMAKE_CXX_FLAGS=%s'         % compile_flags,
-            '-DCMAKE_C_FLAGS=%s'           % compile_flags
-        ])
-
-        cmakeOptions.extend(BuildTypeOptions)
+    build_directory = 'build_cbtf_lanl'
 
-    def install(self, spec, prefix):
+    def build_type(self):
+        return 'None'
 
-        # Add in paths for finding package config files that tell us where to
-        # find these packages
-        cmake_prefix_path = join_path(
-            spec['cbtf'].prefix) + ':' + join_path(spec['cbtf-krell'].prefix)
+    def cmake_args(self):
 
-        with working_dir('build', create=True):
-            cmakeOptions = []
-            cmakeOptions.extend(
-                ['-DCMAKE_INSTALL_PREFIX=%s'   % prefix,
-                 '-DCBTF_DIR=%s'               % spec['cbtf'].prefix,
-                 '-DCBTF_KRELL_DIR=%s'         % spec['cbtf-krell'].prefix,
-                 '-DMRNET_DIR=%s'              % spec['mrnet'].prefix,
-                 '-DXERCESC_DIR=%s'            % spec['xerces-c'].prefix,
-                 '-DCMAKE_PREFIX_PATH=%s'      % cmake_prefix_path,
-                 '-DCMAKE_MODULE_PATH=%s'      % join_path(
-                     prefix.share, 'KrellInstitute', 'cmake')])
-
-            # Add in the standard cmake arguments
-            cmakeOptions.extend(std_cmake_args)
-
-            # Adjust the standard cmake arguments to what we want the build
-            # type, etc to be
-            self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-            # Invoke cmake
-            cmake('..', *cmakeOptions)
+        spec = self.spec
+        compile_flags = "-O2 -g"
 
-            make("clean")
-            make()
-            make("install")
+        cmake_args = [
+            '-DCMAKE_CXX_FLAGS=%s'        % compile_flags,
+            '-DCMAKE_C_FLAGS=%s'          % compile_flags,
+            '-DCBTF_DIR=%s'               % spec['cbtf'].prefix,
+            '-DCBTF_KRELL_DIR=%s'         % spec['cbtf-krell'].prefix,
+            '-DMRNET_DIR=%s'              % spec['mrnet'].prefix,
+            '-DXERCESC_DIR=%s'            % spec['xerces-c'].prefix,
+            '-DCMAKE_MODULE_PATH=%s'      % join_path(
+                prefix.share, 'KrellInstitute', 'cmake')]
+
+        return cmake_args
diff --git a/var/spack/repos/builtin/packages/cbtf/package.py b/var/spack/repos/builtin/packages/cbtf/package.py
index a9b141985f..68e2b7d0a2 100644
--- a/var/spack/repos/builtin/packages/cbtf/package.py
+++ b/var/spack/repos/builtin/packages/cbtf/package.py
@@ -1,5 +1,5 @@
 ##############################################################################
-# Copyright (c) 2013-2016, Lawrence Livermore National Security, LLC.
+# Copyright (c) 2013-2017, Lawrence Livermore National Security, LLC.
 # Produced at the Lawrence Livermore National Laboratory.
 #
 # This file is part of Spack.
@@ -23,7 +23,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 ##############################################################################
 ##########################################################################
-# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved.
+# Copyright (c) 2015-2017 Krell Institute. All Rights Reserved.
 #
 # This program is free software; you can redistribute it and/or modify it under
 # the terms of the GNU General Public License as published by the Free Software
@@ -43,7 +43,7 @@
 from spack import *
 
 
-class Cbtf(Package):
+class Cbtf(CMakePackage):
     """CBTF project contains the base code for CBTF that supports creating
        components, component networks and the support to connect these
        components and component networks into sequential and distributed
@@ -52,10 +52,6 @@ class Cbtf(Package):
     """
     homepage = "http://sourceforge.net/p/cbtf/wiki/Home"
 
-    # Mirror access template example
-    # url      = "file:/home/jeg/cbtf-1.6.tar.gz"
-    # version('1.6', 'c1ef4e5aa4e470dffb042abdba0b9987')
-
     # Use when the git repository is available
     version('1.8', branch='master',
             git='https://github.com/OpenSpeedShop/cbtf.git')
@@ -72,82 +68,45 @@ class Cbtf(Package):
 
     parallel = False
 
-    def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions):
-        # Sets build type parameters into cmakeOptions the options that will
-        # enable the cbtf-krell built type settings
+    build_directory = 'build_cbtf'
+
+    def build_type(self):
+        return 'None'
+
+    def cmake_args(self):
+
+        spec = self.spec
+
+        # Boost_NO_SYSTEM_PATHS  Set to TRUE to suppress searching
+        # in system paths (or other locations outside of BOOST_ROOT
+        # or BOOST_INCLUDEDIR).  Useful when specifying BOOST_ROOT.
+        # Defaults to OFF.
 
         compile_flags = "-O2 -g"
-        BuildTypeOptions = []
-        # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it to be, not the
-        # stdcmakeargs
-        for word in cmakeOptions[:]:
-            if word.startswith('-DCMAKE_BUILD_TYPE'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_CXX_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_C_FLAGS'):
-                cmakeOptions.remove(word)
-        BuildTypeOptions.extend([
-            '-DCMAKE_BUILD_TYPE=None',
-            '-DCMAKE_CXX_FLAGS=%s'         % compile_flags,
-            '-DCMAKE_C_FLAGS=%s'           % compile_flags
-        ])
-
-        cmakeOptions.extend(BuildTypeOptions)
-
-    def install(self, spec, prefix):
-        with working_dir('build', create=True):
-
-            # Boost_NO_SYSTEM_PATHS  Set to TRUE to suppress searching
-            # in system paths (or other locations outside of BOOST_ROOT
-            # or BOOST_INCLUDEDIR).  Useful when specifying BOOST_ROOT.
-            # Defaults to OFF.
-
-            if '+runtime' in spec:
-                # Install message tag include file for use in Intel MIC
-                # cbtf-krell build
-                # FIXME
-                cmakeOptions = []
-                cmakeOptions.extend(
-                    ['-DCMAKE_INSTALL_PREFIX=%s' % prefix,
-                     '-DBoost_NO_SYSTEM_PATHS=TRUE',
-                     '-DXERCESC_DIR=%s'         % spec['xerces-c'].prefix,
-                     '-DBOOST_ROOT=%s'          % spec['boost'].prefix,
-                     '-DMRNET_DIR=%s'           % spec['mrnet'].prefix,
-                     '-DCMAKE_MODULE_PATH=%s'   % join_path(
-                         prefix.share, 'KrellInstitute', 'cmake')])
-
-                # Add in the standard cmake arguments
-                cmakeOptions.extend(std_cmake_args)
-
-                # Adjust the standard cmake arguments to what we want the build
-                # type, etc to be
-                self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                # Invoke cmake
-                cmake('..', *cmakeOptions)
-
-            else:
-                cmakeOptions = []
-                cmakeOptions.extend(
-                    ['-DCMAKE_INSTALL_PREFIX=%s' % prefix,
-                     '-DBoost_NO_SYSTEM_PATHS=TRUE',
-                     '-DXERCESC_DIR=%s'         % spec['xerces-c'].prefix,
-                     '-DBOOST_ROOT=%s'          % spec['boost'].prefix,
-                     '-DMRNET_DIR=%s'           % spec['mrnet'].prefix,
-                     '-DCMAKE_MODULE_PATH=%s'   % join_path(
-                         prefix.share, 'KrellInstitute', 'cmake')])
-
-                # Add in the standard cmake arguments
-                cmakeOptions.extend(std_cmake_args)
-
-                # Adjust the standard cmake arguments to what we want the build
-                # type, etc to be
-                self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                # Invoke cmake
-                cmake('..', *cmakeOptions)
-
-            make("clean")
-            make()
-            make("install")
+
+        if '+runtime' in spec:
+            # Install message tag include file for use in Intel MIC
+            # cbtf-krell build
+            # FIXME
+            cmake_args = [
+                '-DCMAKE_CXX_FLAGS=%s'     % compile_flags,
+                '-DCMAKE_C_FLAGS=%s'       % compile_flags,
+                '-DRUNTIME_ONLY=TRUE',
+                '-DBoost_NO_SYSTEM_PATHS=TRUE',
+                '-DXERCESC_DIR=%s'         % spec['xerces-c'].prefix,
+                '-DBOOST_ROOT=%s'          % spec['boost'].prefix,
+                '-DMRNET_DIR=%s'           % spec['mrnet'].prefix,
+                '-DCMAKE_MODULE_PATH=%s'   % join_path(
+                    prefix.share, 'KrellInstitute', 'cmake')]
+        else:
+            cmake_args = [
+                '-DCMAKE_CXX_FLAGS=%s'     % compile_flags,
+                '-DCMAKE_C_FLAGS=%s'       % compile_flags,
+                '-DBoost_NO_SYSTEM_PATHS=TRUE',
+                '-DXERCESC_DIR=%s'         % spec['xerces-c'].prefix,
+                '-DBOOST_ROOT=%s'          % spec['boost'].prefix,
+                '-DMRNET_DIR=%s'           % spec['mrnet'].prefix,
+                '-DCMAKE_MODULE_PATH=%s'   % join_path(
+                    prefix.share, 'KrellInstitute', 'cmake')]
+
+        return cmake_args
diff --git a/var/spack/repos/builtin/packages/openspeedshop/package.py b/var/spack/repos/builtin/packages/openspeedshop/package.py
index 7b1c66e5d1..2acb44ad02 100644
--- a/var/spack/repos/builtin/packages/openspeedshop/package.py
+++ b/var/spack/repos/builtin/packages/openspeedshop/package.py
@@ -1,5 +1,5 @@
 ##############################################################################
-# Copyright (c) 2013-2016, Lawrence Livermore National Security, LLC.
+# Copyright (c) 2013-2017, Lawrence Livermore National Security, LLC.
 # Produced at the Lawrence Livermore National Laboratory.
 #
 # This file is part of Spack.
@@ -23,7 +23,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 ##############################################################################
 ##############################################################################
-# Copyright (c) 2015-2016 Krell Institute. All Rights Reserved.
+# Copyright (c) 2015-2017 Krell Institute. All Rights Reserved.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by the Free
@@ -45,7 +45,7 @@ import os
 import os.path
 
 
-class Openspeedshop(Package):
+class Openspeedshop(CMakePackage):
     """OpenSpeedShop is a community effort by The Krell Institute with
        current direct funding from DOEs NNSA.  It builds on top of a
        broad list of community infrastructures, most notably Dyninst
@@ -61,17 +61,11 @@ class Openspeedshop(Package):
 
     homepage = "http://www.openspeedshop.org"
     url = "https://github.com/OpenSpeedShop"
-    version('2.2', '16cb051179c2038de4e8a845edf1d573')
+
     # Use when the git repository is available
     version('2.3', branch='master',
             git='https://github.com/OpenSpeedShop/openspeedshop.git')
 
-    # Optional mirror template
-    # url = "file:/home/jeg/OpenSpeedShop_ROOT/SOURCES/openspeedshop-2.3.tar.gz"
-    # version('2.3', '517a7798507241ad8abd8b0626a4d2cf')
-
-    parallel = False
-
     variant('offline', default=False,
             description="build with offline instrumentor enabled.")
     variant('cbtf', default=True,
@@ -83,8 +77,9 @@ class Openspeedshop(Package):
                          to point to target build.")
     variant('cuda', default=False,
             description="build with cuda packages included.")
-    variant('ptgf', default=False,
-            description="build with the PTGF based gui package enabled.")
+    variant('useqt4gui', default=False,
+            description="build with Qt4/Qt5 based gui package enabled. \
+                         Do not build older Qt3 gui")
     variant('rtfe', default=False,
             description="build for clusters heterogeneous processors \
                          on fe/be nodes.")
@@ -115,15 +110,13 @@ class Openspeedshop(Package):
     depends_on("bison", type='build')
     depends_on("flex", type='build')
     depends_on("binutils@2.24+krellpatch", type='build')
-    # TODO: when using dyninst@9.3.0:, we will need to use elf
-    # depends_on("elf", type="link")
-    depends_on("libelf")
+    depends_on("elf", type="link")
     depends_on("libdwarf")
     depends_on("sqlite")
     depends_on("boost@1.50.0:1.59.0")
-    depends_on("dyninst@9.2.0")
+    depends_on("dyninst@9.3.2")
     depends_on("libxml2+python")
-    depends_on("qt@3.3.8b+krellpatch")
+    depends_on("qt@3.3.8b+krellpatch", when='~useqt4gui')
 
     # Dependencies only for the openspeedshop offline package.
     depends_on("libunwind", when='+offline')
@@ -138,30 +131,124 @@ class Openspeedshop(Package):
 
     # Dependencies only for the openspeedshop cbtf package.
     depends_on("cbtf", when='+cbtf')
-    depends_on("cbtf-krell", when='+cbtf')
+    depends_on('cbtf-krell+mpich', when='+cbtf+mpich')
+    depends_on('cbtf-krell+mpich2', when='+cbtf+mpich2')
+    depends_on('cbtf-krell+mpt', when='+cbtf+mpt')
+    depends_on('cbtf-krell+mvapich', when='+cbtf+mvapich')
+    depends_on('cbtf-krell+mvapich2', when='+cbtf+mvapich2')
+    depends_on('cbtf-krell+openmpi', when='+cbtf+openmpi')
     depends_on("cbtf-argonavis", when='+cbtf+cuda')
     depends_on("mrnet@5.0.1:+lwthreads", when='+cbtf')
 
-    def adjustBuildTypeParams_cmakeOptions(self, spec, cmakeOptions):
-        # Sets build type parameters into cmakeOptions the
-        # options that will enable the cbtf-krell built type settings
+    parallel = False
+
+    build_directory = 'build_openspeedshop'
+
+    def build_type(self):
+        return 'None'
 
+    def cmake_args(self):
+        spec = self.spec
         compile_flags = "-O2 -g"
-        BuildTypeOptions = []
-        # Set CMAKE_BUILD_TYPE to what cbtf-krell wants it
-        # to be, not the stdcmakeargs
-        for word in cmakeOptions[:]:
-            if word.startswith('-DCMAKE_BUILD_TYPE'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_CXX_FLAGS'):
-                cmakeOptions.remove(word)
-            if word.startswith('-DCMAKE_C_FLAGS'):
-                cmakeOptions.remove(word)
-        BuildTypeOptions.extend(['-DCMAKE_BUILD_TYPE=None',
-                                 '-DCMAKE_CXX_FLAGS=%s'  % compile_flags,
-                                 '-DCMAKE_C_FLAGS=%s'    % compile_flags])
-
-        cmakeOptions.extend(BuildTypeOptions)
+
+        if '+offline' in spec:
+            instrumentor_setting = "offline"
+            if '+runtime' in spec:
+
+                cmake_args = [
+                    '-DCMAKE_CXX_FLAGS=%s'  % compile_flags,
+                    '-DCMAKE_C_FLAGS=%s'    % compile_flags,
+                    '-DINSTRUMENTOR=%s'     % instrumentor_setting,
+                    '-DLIBMONITOR_DIR=%s'   % spec['libmonitor'].prefix,
+                    '-DLIBUNWIND_DIR=%s'    % spec['libunwind'].prefix,
+                    '-DPAPI_DIR=%s'         % spec['papi'].prefix]
+
+                # Add any MPI implementations coming from variant settings
+                self.set_mpi_cmakeOptions(spec, cmake_args)
+
+            else:
+                cmake_args = []
+
+                # Appends base options to cmake_args
+                self.set_defaultbase_cmakeOptions(spec, cmake_args)
+
+                cmake_args.extend(
+                    ['-DCMAKE_CXX_FLAGS=%s'  % compile_flags,
+                     '-DCMAKE_C_FLAGS=%s'    % compile_flags,
+                     '-DINSTRUMENTOR=%s'
+                        % instrumentor_setting,
+                     '-DLIBMONITOR_DIR=%s'
+                        % spec['libmonitor'].prefix,
+                     '-DLIBUNWIND_DIR=%s'
+                        % spec['libunwind'].prefix,
+                     '-DPAPI_DIR=%s'
+                        % spec['papi'].prefix,
+                     '-DSQLITE3_DIR=%s'
+                        % spec['sqlite'].prefix,
+                     '-DQTLIB_DIR=%s'
+                        % spec['qt'].prefix])
+
+                # Add any MPI implementations coming from variant settings
+                self.set_mpi_cmakeOptions(spec, cmake_args)
+
+        elif '+cbtf' in spec:
+            instrumentor_setting = "cbtf"
+
+            if '+runtime' in spec:
+
+                # Appends base options to cmake_args
+                self.set_defaultbase_cmakeOptions(spec, cmake_args)
+
+                cmake_args.extend(
+                    ['-DCMAKE_CXX_FLAGS=%s'  % compile_flags,
+                     '-DCMAKE_C_FLAGS=%s'    % compile_flags,
+                     '-DINSTRUMENTOR=%s'
+                        % instrumentor_setting,
+                     '-DCBTF_DIR=%s'
+                        % spec['cbtf'].prefix,
+                     '-DCBTF_KRELL_DIR=%s'
+                        % spec['cbtf-krell'].prefix,
+                     '-DMRNET_DIR=%s'
+                        % spec['mrnet'].prefix])
+
+            else:
+                cmake_args = []
+
+                # Appends base options to cmake_args
+                self.set_defaultbase_cmakeOptions(spec, cmake_args)
+
+                if '+useqt4gui' in self.spec:
+                    cmake_args.extend(
+                        ['-DCMAKE_CXX_FLAGS=%s'  % compile_flags,
+                         '-DCMAKE_C_FLAGS=%s'    % compile_flags,
+                         '-DINSTRUMENTOR=%s'
+                            % instrumentor_setting,
+                         '-DSQLITE3_DIR=%s'
+                            % spec['sqlite'].prefix,
+                         '-DCBTF_DIR=%s'
+                            % spec['cbtf'].prefix,
+                         '-DCBTF_KRELL_DIR=%s'
+                            % spec['cbtf-krell'].prefix,
+                         '-DMRNET_DIR=%s'
+                            % spec['mrnet'].prefix])
+                else:
+                    cmake_args.extend(
+                        ['-DCMAKE_CXX_FLAGS=%s'  % compile_flags,
+                         '-DCMAKE_C_FLAGS=%s'    % compile_flags,
+                         '-DINSTRUMENTOR=%s'
+                            % instrumentor_setting,
+                         '-DSQLITE3_DIR=%s'
+                            % spec['sqlite'].prefix,
+                         '-DCBTF_DIR=%s'
+                            % spec['cbtf'].prefix,
+                         '-DCBTF_KRELL_DIR=%s'
+                            % spec['cbtf-krell'].prefix,
+                         '-DQTLIB_DIR=%s'
+                            % spec['qt'].prefix,
+                         '-DMRNET_DIR=%s'
+                            % spec['mrnet'].prefix])
+
+        return cmake_args
 
     def set_defaultbase_cmakeOptions(self, spec, cmakeOptions):
         # Appends to cmakeOptions the options that will enable
@@ -174,7 +261,7 @@ class Openspeedshop(Package):
         BaseOptions = []
 
         BaseOptions.append('-DBINUTILS_DIR=%s' % spec['binutils'].prefix)
-        BaseOptions.append('-DLIBELF_DIR=%s' % spec['libelf'].prefix)
+        BaseOptions.append('-DLIBELF_DIR=%s' % spec['elf'].prefix)
         BaseOptions.append('-DLIBDWARF_DIR=%s' % spec['libdwarf'].prefix)
         BaseOptions.append('-DPYTHON_EXECUTABLE=%s' % python_exe)
         BaseOptions.append('-DPYTHON_INCLUDE_DIR=%s' % python_include)
@@ -273,144 +360,3 @@ class Openspeedshop(Package):
                 run_env.set('OPENSS_MPI_IMPLEMENTATION', 'mvapich2')
             if '+openmpi' in self.spec:
                 run_env.set('OPENSS_MPI_IMPLEMENTATION', 'openmpi')
-
-    def install(self, spec, prefix):
-
-        if '+offline' in spec:
-            instrumentor_setting = "offline"
-            if '+runtime' in spec:
-                with working_dir('build_runtime', create=True):
-
-                    cmakeOptions = []
-                    cmakeOptions.extend([
-                        '-DCMAKE_INSTALL_PREFIX=%s' % prefix,
-                        '-DINSTRUMENTOR=%s'     % instrumentor_setting,
-                        '-DLIBMONITOR_DIR=%s'   % spec['libmonitor'].prefix,
-                        '-DLIBUNWIND_DIR=%s'    % spec['libunwind'].prefix,
-                        '-DPAPI_DIR=%s'         % spec['papi'].prefix])
-
-                    # Add any MPI implementations coming from variant settings
-                    self.set_mpi_cmakeOptions(spec, cmakeOptions)
-                    cmakeOptions.extend(std_cmake_args)
-
-                    # Adjust the build options to the favored
-                    # ones for this build
-                    self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                    cmake('..', *cmakeOptions)
-
-                    make("clean")
-                    make()
-                    make("install")
-            else:
-                cmake_prefix_path = join_path(spec['dyninst'].prefix)
-                with working_dir('build', create=True):
-                    cmakeOptions = []
-
-                    # Appends base options to cmakeOptions
-                    self.set_defaultbase_cmakeOptions(spec, cmakeOptions)
-
-                    cmakeOptions.extend(
-                        ['-DCMAKE_INSTALL_PREFIX=%s'
-                            % prefix,
-                         '-DCMAKE_PREFIX_PATH=%s'
-                            % cmake_prefix_path,
-                         '-DINSTRUMENTOR=%s'
-                            % instrumentor_setting,
-                         '-DLIBMONITOR_DIR=%s'
-                            % spec['libmonitor'].prefix,
-                         '-DLIBUNWIND_DIR=%s'
-                            % spec['libunwind'].prefix,
-                         '-DPAPI_DIR=%s'
-                            % spec['papi'].prefix,
-                         '-DSQLITE3_DIR=%s'
-                            % spec['sqlite'].prefix,
-                         '-DQTLIB_DIR=%s'
-                            % spec['qt'].prefix])
-
-                    # Add any MPI implementations coming from variant settings
-                    self.set_mpi_cmakeOptions(spec, cmakeOptions)
-                    cmakeOptions.extend(std_cmake_args)
-
-                    # Adjust the build options to the favored
-                    # ones for this build
-                    self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                    cmake('..', *cmakeOptions)
-
-                    make("clean")
-                    make()
-                    make("install")
-
-        elif '+cbtf' in spec:
-            instrumentor_setting = "cbtf"
-            # resolve_symbols = "symtabapi"
-            cmake_prefix_path = join_path(spec['cbtf'].prefix) \
-                + ':' + join_path(spec['cbtf-krell'].prefix)\
-                + ':' + join_path(spec['dyninst'].prefix)
-
-            if '+runtime' in spec:
-                with working_dir('build_cbtf_runtime', create=True):
-                    cmakeOptions = []
-
-                    # Appends base options to cmakeOptions
-                    self.set_defaultbase_cmakeOptions(spec, cmakeOptions)
-
-                    cmakeOptions.extend(
-                        ['-DCMAKE_INSTALL_PREFIX=%s'
-                            % prefix,
-                         '-DCMAKE_PREFIX_PATH=%s'
-                            % cmake_prefix_path,
-                         '-DINSTRUMENTOR=%s'
-                            % instrumentor_setting,
-                         '-DCBTF_DIR=%s'
-                            % spec['cbtf'].prefix,
-                         '-DCBTF_KRELL_DIR=%s'
-                            % spec['cbtf-krell'].prefix,
-                         '-DMRNET_DIR=%s'
-                            % spec['mrnet'].prefix])
-
-                    # Adjust the build options to the
-                    # favored ones for this build
-                    self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                    cmake('..', *cmakeOptions)
-
-                    make("clean")
-                    make()
-                    make("install")
-
-            else:
-                with working_dir('build_cbtf', create=True):
-                    cmakeOptions = []
-
-                    # Appends base options to cmakeOptions
-                    self.set_defaultbase_cmakeOptions(spec, cmakeOptions)
-
-                    cmakeOptions.extend(
-                        ['-DCMAKE_INSTALL_PREFIX=%s'
-                            % prefix,
-                         '-DCMAKE_PREFIX_PATH=%s'
-                            % cmake_prefix_path,
-                         '-DINSTRUMENTOR=%s'
-                            % instrumentor_setting,
-                         '-DSQLITE3_DIR=%s'
-                            % spec['sqlite'].prefix,
-                         '-DCBTF_DIR=%s'
-                            % spec['cbtf'].prefix,
-                         '-DCBTF_KRELL_DIR=%s'
-                            % spec['cbtf-krell'].prefix,
-                         '-DQTLIB_DIR=%s'
-                            % spec['qt'].prefix,
-                         '-DMRNET_DIR=%s'
-                            % spec['mrnet'].prefix])
-
-                    # Adjust the build options to the favored
-                    # ones for this build
-                    self.adjustBuildTypeParams_cmakeOptions(spec, cmakeOptions)
-
-                    cmake('..', *cmakeOptions)
-
-                    make("clean")
-                    make()
-                    make("install")