diff options
author | Kiyoshi Aman <kiyoshi.aman+adelie@gmail.com> | 2019-02-01 22:55:37 +0000 |
---|---|---|
committer | Kiyoshi Aman <kiyoshi.aman+adelie@gmail.com> | 2019-02-03 18:22:05 -0600 |
commit | 5b57d28ffb6e1ef86b50f7d05d977826eae89bfe (patch) | |
tree | 154a22fe556b49e6927197336f8bf91b12eacd5e /bin/pax/pax.c | |
download | userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.tar.gz userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.tar.bz2 userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.tar.xz userland-5b57d28ffb6e1ef86b50f7d05d977826eae89bfe.zip |
initial population
Diffstat (limited to 'bin/pax/pax.c')
-rw-r--r-- | bin/pax/pax.c | 492 |
1 files changed, 492 insertions, 0 deletions
diff --git a/bin/pax/pax.c b/bin/pax/pax.c new file mode 100644 index 0000000..3906569 --- /dev/null +++ b/bin/pax/pax.c @@ -0,0 +1,492 @@ +/* $NetBSD: pax.c,v 1.48 2017/10/02 21:55:35 joerg Exp $ */ + +/*- + * Copyright (c) 1992 Keith Muller. + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Keith Muller of the University of California, San Diego. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#if HAVE_NBTOOL_CONFIG_H +#include "nbtool_config.h" +#endif + +#include <sys/cdefs.h> +#if !defined(lint) +__COPYRIGHT("@(#) Copyright (c) 1992, 1993\ + The Regents of the University of California. All rights reserved."); +#if 0 +static char sccsid[] = "@(#)pax.c 8.2 (Berkeley) 4/18/94"; +#else +__RCSID("$NetBSD: pax.c,v 1.48 2017/10/02 21:55:35 joerg Exp $"); +#endif +#endif /* not lint */ + +#include <sys/param.h> +#include <sys/resource.h> +#include <sys/stat.h> +#include <sys/time.h> +#include <errno.h> +#include <fcntl.h> +#include <paths.h> +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <time.h> +#include <unistd.h> +#include <util.h> +#include "pax.h" +#include "extern.h" +static int gen_init(void); + +/* + * PAX main routines, general globals and some simple start up routines + */ + +/* + * Variables that can be accessed by any routine within pax + */ +int act = ERROR; /* read/write/append/copy */ +FSUB *frmt = NULL; /* archive format type */ +int cflag; /* match all EXCEPT pattern/file */ +int cwdfd = -1; /* starting cwd */ +int dflag; /* directory member match only */ +int iflag; /* interactive file/archive rename */ +int kflag; /* do not overwrite existing files */ +int lflag; /* use hard links when possible */ +int nflag; /* select first archive member match */ +int tflag; /* restore access time after read */ +int uflag; /* ignore older modification time files */ +int vflag; /* produce verbose output */ +int Aflag; /* honor absolute path */ +int Dflag; /* same as uflag except inode change time */ +int Hflag; /* follow command line symlinks (write only) */ +int Lflag; /* follow symlinks when writing */ +int Mflag; /* treat stdin as an mtree(8) specfile */ +int Vflag; /* produce somewhat verbose output (no listing) */ +int Xflag; /* archive files with same device id only */ +int Yflag; /* same as Dflg except after name mode */ +int Zflag; /* same as uflg except after name mode */ +int vfpart; /* is partial verbose output in progress */ +int patime = 1; /* preserve file access time */ +int pmtime = 1; /* preserve file modification times */ +int nodirs; /* do not create directories as needed */ +int pfflags = 1; /* preserve file flags */ +int pmode; /* preserve file mode bits */ +int pids; /* preserve file uid/gid */ +int rmleadslash = 0; /* remove leading '/' from pathnames */ +int exit_val; /* exit value */ +int docrc; /* check/create file crc */ +int to_stdout; /* extract to stdout */ +char *dirptr; /* destination dir in a copy */ +char *ltmfrmt; /* -v locale time format (if any) */ +const char *argv0; /* root of argv[0] */ +sigset_t s_mask; /* signal mask for cleanup critical sect */ +FILE *listf; /* file pointer to print file list to */ +char *tempfile; /* tempfile to use for mkstemp(3) */ +char *tempbase; /* basename of tempfile to use for mkstemp(3) */ +int forcelocal; /* force local operation even if the name + * contains a : + */ +int secure = 1; /* don't extract names that contain .. */ + +/* + * PAX - Portable Archive Interchange + * + * A utility to read, write, and write lists of the members of archive + * files and copy directory hierarchies. A variety of archive formats + * are supported (some are described in POSIX 1003.1 10.1): + * + * ustar - 10.1.1 extended tar interchange format + * cpio - 10.1.2 extended cpio interchange format + * tar - old BSD 4.3 tar format + * binary cpio - old cpio with binary header format + * sysVR4 cpio - with and without CRC + * + * This version is a superset of IEEE Std 1003.2b-d3 + * + * Summary of Extensions to the IEEE Standard: + * + * 1 READ ENHANCEMENTS + * 1.1 Operations which read archives will continue to operate even when + * processing archives which may be damaged, truncated, or fail to meet + * format specs in several different ways. Damaged sections of archives + * are detected and avoided if possible. Attempts will be made to resync + * archive read operations even with badly damaged media. + * 1.2 Blocksize requirements are not strictly enforced on archive read. + * Tapes which have variable sized records can be read without errors. + * 1.3 The user can specify via the non-standard option flag -E if error + * resync operation should stop on a media error, try a specified number + * of times to correct, or try to correct forever. + * 1.4 Sparse files (lseek holes) stored on the archive (but stored with blocks + * of all zeros will be restored with holes appropriate for the target + * filesystem + * 1.5 The user is notified whenever something is found during archive + * read operations which violates spec (but the read will continue). + * 1.6 Multiple archive volumes can be read and may span over different + * archive devices + * 1.7 Rigidly restores all file attributes exactly as they are stored on the + * archive. + * 1.8 Modification change time ranges can be specified via multiple -T + * options. These allow a user to select files whose modification time + * lies within a specific time range. + * 1.9 Files can be selected based on owner (user name or uid) via one or more + * -U options. + * 1.10 Files can be selected based on group (group name or gid) via one o + * more -G options. + * 1.11 File modification time can be checked against existing file after + * name modification (-Z) + * + * 2 WRITE ENHANCEMENTS + * 2.1 Write operation will stop instead of allowing a user to create a flawed + * flawed archive (due to any problem). + * 2.2 Archives written by pax are forced to strictly conform to both the + * archive and pax the specific format specifications. + * 2.3 Blocking size and format is rigidly enforced on writes. + * 2.4 Formats which may exhibit header overflow problems (they have fields + * too small for large file systems, such as inode number storage), use + * routines designed to repair this problem. These techniques still + * conform to both pax and format specifications, but no longer truncate + * these fields. This removes any restrictions on using these archive + * formats on large file systems. + * 2.5 Multiple archive volumes can be written and may span over different + * archive devices + * 2.6 A archive volume record limit allows the user to specify the number + * of bytes stored on an archive volume. When reached the user is + * prompted for the next archive volume. This is specified with the + * non-standard -B flag. The limit is rounded up to the next blocksize. + * 2.7 All archive padding during write use zero filled sections. This makes + * it much easier to pull data out of flawed archive during read + * operations. + * 2.8 Access time reset with the -t applies to all file nodes (including + * directories). + * 2.9 Symbolic links can be followed with -L (optional in the spec). + * 2.10 Modification or inode change time ranges can be specified via + * multiple -T options. These allow a user to select files whose + * modification or inode change time lies within a specific time range. + * 2.11 Files can be selected based on owner (user name or uid) via one or more + * -U options. + * 2.12 Files can be selected based on group (group name or gid) via one o + * more -G options. + * 2.13 Symlinks which appear on the command line can be followed (without + * following other symlinks; -H flag) + * + * 3 COPY ENHANCEMENTS + * 3.1 Sparse files (lseek holes) can be copied without expanding the holes + * into zero filled blocks. The file copy is created with holes which are + * appropriate for the target filesystem + * 3.2 Access time as well as modification time on copied file trees can be + * preserved with the appropriate -p options. + * 3.3 Access time reset with the -t applies to all file nodes (including + * directories). + * 3.4 Symbolic links can be followed with -L (optional in the spec). + * 3.5 Modification or inode change time ranges can be specified via + * multiple -T options. These allow a user to select files whose + * modification or inode change time lies within a specific time range. + * 3.6 Files can be selected based on owner (user name or uid) via one or more + * -U options. + * 3.7 Files can be selected based on group (group name or gid) via one o + * more -G options. + * 3.8 Symlinks which appear on the command line can be followed (without + * following other symlinks; -H flag) + * 3.9 File inode change time can be checked against existing file before + * name modification (-D) + * 3.10 File inode change time can be checked against existing file after + * name modification (-Y) + * 3.11 File modification time can be checked against existing file after + * name modification (-Z) + * + * 4 GENERAL ENHANCEMENTS + * 4.1 Internal structure is designed to isolate format dependent and + * independent functions. Formats are selected via a format driver table. + * This encourages the addition of new archive formats by only having to + * write those routines which id, read and write the archive header. + */ + +/* + * main() + * parse options, set up and operate as specified by the user. + * any operational flaw will set exit_val to non-zero + * Return: 0 if ok, 1 otherwise + */ + +int +main(int argc, char **argv) +{ + const char *tmpdir; + size_t tdlen; + int rval; + + setprogname(argv[0]); + + listf = stderr; + + /* + * parse options, determine operational mode + */ + options(argc, argv); + + /* + * general init + */ + if ((gen_init() < 0) || (tty_init() < 0)) + return exit_val; + + /* + * Keep a reference to cwd, so we can always come back home. + */ + cwdfd = open(".", O_RDONLY); + if (cwdfd < 0) { + syswarn(1, errno, "Can't open current working directory."); + return exit_val; + } + if (updatepath() == -1) + return exit_val; + + /* + * Where should we put temporary files? + */ + if ((tmpdir = getenv("TMPDIR")) == NULL || *tmpdir == '\0') + tmpdir = _PATH_TMP; + tdlen = strlen(tmpdir); + while(tdlen > 0 && tmpdir[tdlen - 1] == '/') + tdlen--; + tempfile = malloc(tdlen + 1 + sizeof(_TFILE_BASE)); + if (tempfile == NULL) { + tty_warn(1, "Cannot allocate memory for temp file name."); + return exit_val; + } + if (tdlen) + memcpy(tempfile, tmpdir, tdlen); + tempbase = tempfile + tdlen; + *tempbase++ = '/'; + + (void)time(&starttime); +#ifdef SIGINFO + (void)signal(SIGINFO, ar_summary); +#endif + /* + * select a primary operation mode + */ + switch (act) { + case EXTRACT: + rval = extract(); + break; + case ARCHIVE: + rval = archive(); + break; + case APPND: + if (gzip_program != NULL) + err(1, "cannot gzip while appending"); + rval = append(); + /* + * Check if we tried to append on an empty file and + * turned into ARCHIVE mode. + */ + if (act == -ARCHIVE) { + act = ARCHIVE; + rval = archive(); + } + break; + case COPY: + rval = copy(); + break; + default: + case LIST: + rval = list(); + break; + } + if (rval != 0) + exit_val = 1; + return exit_val; +} + +/* + * sig_cleanup() + * when interrupted we try to do whatever delayed processing we can. + * This is not critical, but we really ought to limit our damage when we + * are aborted by the user. + * Return: + * never.... + */ + +__dead static void +sig_cleanup(int which_sig) +{ + /* + * restore modes and times for any dirs we may have created + * or any dirs we may have read. Set vflag and vfpart so the user + * will clearly see the message on a line by itself. + */ + vflag = vfpart = 1; +#ifdef SIGXCPU + if (which_sig == SIGXCPU) + tty_warn(1, "CPU time limit reached, cleaning up."); + else +#endif + tty_warn(1, "Signal caught, cleaning up."); + + /* delete any open temporary file */ + if (xtmp_name) + (void)unlink(xtmp_name); + ar_close(); + proc_dir(); + if (tflag) + atdir_end(); + + (void)raise_default_signal(which_sig); + exit(1); +} + +/* + * gen_init() + * general setup routines. Not all are required, but they really help + * when dealing with a medium to large sized archives. + */ + +static int +gen_init(void) +{ + struct rlimit reslimit; + struct sigaction n_hand; + struct sigaction o_hand; + + /* + * Really needed to handle large archives. We can run out of memory for + * internal tables really fast when we have a whole lot of files... + */ + if (getrlimit(RLIMIT_DATA , &reslimit) == 0){ + reslimit.rlim_cur = reslimit.rlim_max; + (void)setrlimit(RLIMIT_DATA , &reslimit); + } + + /* + * should file size limits be waived? if the os limits us, this is + * needed if we want to write a large archive + */ + if (getrlimit(RLIMIT_FSIZE , &reslimit) == 0){ + reslimit.rlim_cur = reslimit.rlim_max; + (void)setrlimit(RLIMIT_FSIZE , &reslimit); + } + + /* + * increase the size the stack can grow to + */ + if (getrlimit(RLIMIT_STACK , &reslimit) == 0){ + reslimit.rlim_cur = reslimit.rlim_max; + (void)setrlimit(RLIMIT_STACK , &reslimit); + } + +#ifdef RLIMIT_RSS + /* + * not really needed, but doesn't hurt + */ + if (getrlimit(RLIMIT_RSS , &reslimit) == 0){ + reslimit.rlim_cur = reslimit.rlim_max; + (void)setrlimit(RLIMIT_RSS , &reslimit); + } +#endif + + /* + * Handle posix locale + * + * set user defines time printing format for -v option + */ + ltmfrmt = getenv("LC_TIME"); + + /* + * signal handling to reset stored directory times and modes. Since + * we deal with broken pipes via failed writes we ignore it. We also + * deal with any file size limit through failed writes. CPU time + * limits are caught and a cleanup is forced. + */ + if ((sigemptyset(&s_mask) < 0) || (sigaddset(&s_mask, SIGTERM) < 0) || + (sigaddset(&s_mask,SIGINT) < 0)||(sigaddset(&s_mask,SIGHUP) < 0) || + (sigaddset(&s_mask,SIGPIPE) < 0)||(sigaddset(&s_mask,SIGQUIT)<0)){ + tty_warn(1, "Unable to set up signal mask"); + return -1; + } +#ifdef SIGXCPU + if (sigaddset(&s_mask,SIGXCPU) < 0) { + tty_warn(1, "Unable to set up signal mask"); + return -1; + } +#endif +#ifdef SIGXFSZ + if (sigaddset(&s_mask,SIGXFSZ) < 0) { + tty_warn(1, "Unable to set up signal mask"); + return -1; + } +#endif + + memset(&n_hand, 0, sizeof n_hand); + n_hand.sa_mask = s_mask; + n_hand.sa_flags = 0; + n_hand.sa_handler = sig_cleanup; + + if ((sigaction(SIGHUP, &n_hand, &o_hand) < 0) && + (o_hand.sa_handler == SIG_IGN) && + (sigaction(SIGHUP, &o_hand, &o_hand) < 0)) + goto out; + + if ((sigaction(SIGTERM, &n_hand, &o_hand) < 0) && + (o_hand.sa_handler == SIG_IGN) && + (sigaction(SIGTERM, &o_hand, &o_hand) < 0)) + goto out; + + if ((sigaction(SIGINT, &n_hand, &o_hand) < 0) && + (o_hand.sa_handler == SIG_IGN) && + (sigaction(SIGINT, &o_hand, &o_hand) < 0)) + goto out; + + if ((sigaction(SIGQUIT, &n_hand, &o_hand) < 0) && + (o_hand.sa_handler == SIG_IGN) && + (sigaction(SIGQUIT, &o_hand, &o_hand) < 0)) + goto out; + +#ifdef SIGXCPU + if ((sigaction(SIGXCPU, &n_hand, &o_hand) < 0) && + (o_hand.sa_handler == SIG_IGN) && + (sigaction(SIGXCPU, &o_hand, &o_hand) < 0)) + goto out; +#endif + n_hand.sa_handler = SIG_IGN; + if (sigaction(SIGPIPE, &n_hand, &o_hand) < 0) + goto out; +#ifdef SIGXFSZ + if (sigaction(SIGXFSZ, &n_hand, &o_hand) < 0) + goto out; +#endif + return 0; + + out: + syswarn(1, errno, "Unable to set up signal handler"); + return -1; +} |